prompt: fix show upstream with svn and zsh
[git.git] / Documentation / git-commit.txt
blob8172938653552c0b4cc3f3154195a7d83721a5a3
1 git-commit(1)
2 =============
4 NAME
5 ----
6 git-commit - Record changes to the repository
8 SYNOPSIS
9 --------
10 [verse]
11 'git commit' [-a | --interactive | --patch] [-s] [-v] [-u<mode>] [--amend]
12            [--dry-run] [(-c | -C | --fixup | --squash) <commit>]
13            [-F <file> | -m <msg>] [--reset-author] [--allow-empty]
14            [--allow-empty-message] [--no-verify] [-e] [--author=<author>]
15            [--date=<date>] [--cleanup=<mode>] [--status | --no-status]
16            [-i | -o] [-S[<keyid>]] [--] [<file>...]
18 DESCRIPTION
19 -----------
20 Stores the current contents of the index in a new commit along
21 with a log message from the user describing the changes.
23 The content to be added can be specified in several ways:
25 1. by using 'git add' to incrementally "add" changes to the
26    index before using the 'commit' command (Note: even modified
27    files must be "added");
29 2. by using 'git rm' to remove files from the working tree
30    and the index, again before using the 'commit' command;
32 3. by listing files as arguments to the 'commit' command, in which
33    case the commit will ignore changes staged in the index, and instead
34    record the current content of the listed files (which must already
35    be known to Git);
37 4. by using the -a switch with the 'commit' command to automatically
38    "add" changes from all known files (i.e. all files that are already
39    listed in the index) and to automatically "rm" files in the index
40    that have been removed from the working tree, and then perform the
41    actual commit;
43 5. by using the --interactive or --patch switches with the 'commit' command
44    to decide one by one which files or hunks should be part of the commit,
45    before finalizing the operation. See the ``Interactive Mode'' section of
46    linkgit:git-add[1] to learn how to operate these modes.
48 The `--dry-run` option can be used to obtain a
49 summary of what is included by any of the above for the next
50 commit by giving the same set of parameters (options and paths).
52 If you make a commit and then find a mistake immediately after
53 that, you can recover from it with 'git reset'.
56 OPTIONS
57 -------
58 -a::
59 --all::
60         Tell the command to automatically stage files that have
61         been modified and deleted, but new files you have not
62         told Git about are not affected.
64 -p::
65 --patch::
66         Use the interactive patch selection interface to chose
67         which changes to commit. See linkgit:git-add[1] for
68         details.
70 -C <commit>::
71 --reuse-message=<commit>::
72         Take an existing commit object, and reuse the log message
73         and the authorship information (including the timestamp)
74         when creating the commit.
76 -c <commit>::
77 --reedit-message=<commit>::
78         Like '-C', but with '-c' the editor is invoked, so that
79         the user can further edit the commit message.
81 --fixup=<commit>::
82         Construct a commit message for use with `rebase --autosquash`.
83         The commit message will be the subject line from the specified
84         commit with a prefix of "fixup! ".  See linkgit:git-rebase[1]
85         for details.
87 --squash=<commit>::
88         Construct a commit message for use with `rebase --autosquash`.
89         The commit message subject line is taken from the specified
90         commit with a prefix of "squash! ".  Can be used with additional
91         commit message options (`-m`/`-c`/`-C`/`-F`). See
92         linkgit:git-rebase[1] for details.
94 --reset-author::
95         When used with -C/-c/--amend options, or when committing after a
96         a conflicting cherry-pick, declare that the authorship of the
97         resulting commit now belongs of the committer. This also renews
98         the author timestamp.
100 --short::
101         When doing a dry-run, give the output in the short-format. See
102         linkgit:git-status[1] for details. Implies `--dry-run`.
104 --branch::
105         Show the branch and tracking info even in short-format.
107 --porcelain::
108         When doing a dry-run, give the output in a porcelain-ready
109         format. See linkgit:git-status[1] for details. Implies
110         `--dry-run`.
112 --long::
113         When doing a dry-run, give the output in a the long-format.
114         Implies `--dry-run`.
116 -z::
117 --null::
118         When showing `short` or `porcelain` status output, terminate
119         entries in the status output with NUL, instead of LF. If no
120         format is given, implies the `--porcelain` output format.
122 -F <file>::
123 --file=<file>::
124         Take the commit message from the given file.  Use '-' to
125         read the message from the standard input.
127 --author=<author>::
128         Override the commit author. Specify an explicit author using the
129         standard `A U Thor <author@example.com>` format. Otherwise <author>
130         is assumed to be a pattern and is used to search for an existing
131         commit by that author (i.e. rev-list --all -i --author=<author>);
132         the commit author is then copied from the first such commit found.
134 --date=<date>::
135         Override the author date used in the commit.
137 -m <msg>::
138 --message=<msg>::
139         Use the given <msg> as the commit message.
140         If multiple `-m` options are given, their values are
141         concatenated as separate paragraphs.
143 -t <file>::
144 --template=<file>::
145         When editing the commit message, start the editor with the
146         contents in the given file.  The `commit.template` configuration
147         variable is often used to give this option implicitly to the
148         command.  This mechanism can be used by projects that want to
149         guide participants with some hints on what to write in the message
150         in what order.  If the user exits the editor without editing the
151         message, the commit is aborted.  This has no effect when a message
152         is given by other means, e.g. with the `-m` or `-F` options.
154 -s::
155 --signoff::
156         Add Signed-off-by line by the committer at the end of the commit
157         log message.
159 -n::
160 --no-verify::
161         This option bypasses the pre-commit and commit-msg hooks.
162         See also linkgit:githooks[5].
164 --allow-empty::
165         Usually recording a commit that has the exact same tree as its
166         sole parent commit is a mistake, and the command prevents you
167         from making such a commit.  This option bypasses the safety, and
168         is primarily for use by foreign SCM interface scripts.
170 --allow-empty-message::
171        Like --allow-empty this command is primarily for use by foreign
172        SCM interface scripts. It allows you to create a commit with an
173        empty commit message without using plumbing commands like
174        linkgit:git-commit-tree[1].
176 --cleanup=<mode>::
177         This option determines how the supplied commit message should be
178         cleaned up before committing.  The '<mode>' can be `strip`,
179         `whitespace`, `verbatim`, or `default`.
182 strip::
183         Strip leading and trailing empty lines, trailing whitespace, and
184         #commentary and collapse consecutive empty lines.
185 whitespace::
186         Same as `strip` except #commentary is not removed.
187 verbatim::
188         Do not change the message at all.
189 default::
190         Same as `strip` if the message is to be edited.
191         Otherwise `whitespace`.
194 The default can be changed by the 'commit.cleanup' configuration
195 variable (see linkgit:git-config[1]).
197 -e::
198 --edit::
199         The message taken from file with `-F`, command line with
200         `-m`, and from commit object with `-C` are usually used as
201         the commit log message unmodified. This option lets you
202         further edit the message taken from these sources.
204 --no-edit::
205         Use the selected commit message without launching an editor.
206         For example, `git commit --amend --no-edit` amends a commit
207         without changing its commit message.
209 --amend::
210         Replace the tip of the current branch by creating a new
211         commit. The recorded tree is prepared as usual (including
212         the effect of the `-i` and `-o` options and explicit
213         pathspec), and the message from the original commit is used
214         as the starting point, instead of an empty message, when no
215         other message is specified from the command line via options
216         such as `-m`, `-F`, `-c`, etc.  The new commit has the same
217         parents and author as the current one (the `--reset-author`
218         option can countermand this).
221 It is a rough equivalent for:
222 ------
223         $ git reset --soft HEAD^
224         $ ... do something else to come up with the right tree ...
225         $ git commit -c ORIG_HEAD
227 ------
228 but can be used to amend a merge commit.
231 You should understand the implications of rewriting history if you
232 amend a commit that has already been published.  (See the "RECOVERING
233 FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].)
235 --no-post-rewrite::
236         Bypass the post-rewrite hook.
238 -i::
239 --include::
240         Before making a commit out of staged contents so far,
241         stage the contents of paths given on the command line
242         as well.  This is usually not what you want unless you
243         are concluding a conflicted merge.
245 -o::
246 --only::
247         Make a commit only from the paths specified on the
248         command line, disregarding any contents that have been
249         staged so far. This is the default mode of operation of
250         'git commit' if any paths are given on the command line,
251         in which case this option can be omitted.
252         If this option is specified together with '--amend', then
253         no paths need to be specified, which can be used to amend
254         the last commit without committing changes that have
255         already been staged.
257 -u[<mode>]::
258 --untracked-files[=<mode>]::
259         Show untracked files.
261 The mode parameter is optional (defaults to 'all'), and is used to
262 specify the handling of untracked files; when -u is not used, the
263 default is 'normal', i.e. show untracked files and directories.
265 The possible options are:
267         - 'no'     - Show no untracked files
268         - 'normal' - Shows untracked files and directories
269         - 'all'    - Also shows individual files in untracked directories.
271 The default can be changed using the status.showUntrackedFiles
272 configuration variable documented in linkgit:git-config[1].
274 -v::
275 --verbose::
276         Show unified diff between the HEAD commit and what
277         would be committed at the bottom of the commit message
278         template.  Note that this diff output doesn't have its
279         lines prefixed with '#'.
281 -q::
282 --quiet::
283         Suppress commit summary message.
285 --dry-run::
286         Do not create a commit, but show a list of paths that are
287         to be committed, paths with local changes that will be left
288         uncommitted and paths that are untracked.
290 --status::
291         Include the output of linkgit:git-status[1] in the commit
292         message template when using an editor to prepare the commit
293         message.  Defaults to on, but can be used to override
294         configuration variable commit.status.
296 --no-status::
297         Do not include the output of linkgit:git-status[1] in the
298         commit message template when using an editor to prepare the
299         default commit message.
301 -S[<keyid>]::
302 --gpg-sign[=<keyid>]::
303         GPG-sign commit.
305 \--::
306         Do not interpret any more arguments as options.
308 <file>...::
309         When files are given on the command line, the command
310         commits the contents of the named files, without
311         recording the changes already staged.  The contents of
312         these files are also staged for the next commit on top
313         of what have been staged before.
315 :git-commit: 1
316 include::date-formats.txt[]
318 EXAMPLES
319 --------
320 When recording your own work, the contents of modified files in
321 your working tree are temporarily stored to a staging area
322 called the "index" with 'git add'.  A file can be
323 reverted back, only in the index but not in the working tree,
324 to that of the last commit with `git reset HEAD -- <file>`,
325 which effectively reverts 'git add' and prevents the changes to
326 this file from participating in the next commit.  After building
327 the state to be committed incrementally with these commands,
328 `git commit` (without any pathname parameter) is used to record what
329 has been staged so far.  This is the most basic form of the
330 command.  An example:
332 ------------
333 $ edit hello.c
334 $ git rm goodbye.c
335 $ git add hello.c
336 $ git commit
337 ------------
339 Instead of staging files after each individual change, you can
340 tell `git commit` to notice the changes to the files whose
341 contents are tracked in
342 your working tree and do corresponding `git add` and `git rm`
343 for you.  That is, this example does the same as the earlier
344 example if there is no other change in your working tree:
346 ------------
347 $ edit hello.c
348 $ rm goodbye.c
349 $ git commit -a
350 ------------
352 The command `git commit -a` first looks at your working tree,
353 notices that you have modified hello.c and removed goodbye.c,
354 and performs necessary `git add` and `git rm` for you.
356 After staging changes to many files, you can alter the order the
357 changes are recorded in, by giving pathnames to `git commit`.
358 When pathnames are given, the command makes a commit that
359 only records the changes made to the named paths:
361 ------------
362 $ edit hello.c hello.h
363 $ git add hello.c hello.h
364 $ edit Makefile
365 $ git commit Makefile
366 ------------
368 This makes a commit that records the modification to `Makefile`.
369 The changes staged for `hello.c` and `hello.h` are not included
370 in the resulting commit.  However, their changes are not lost --
371 they are still staged and merely held back.  After the above
372 sequence, if you do:
374 ------------
375 $ git commit
376 ------------
378 this second commit would record the changes to `hello.c` and
379 `hello.h` as expected.
381 After a merge (initiated by 'git merge' or 'git pull') stops
382 because of conflicts, cleanly merged
383 paths are already staged to be committed for you, and paths that
384 conflicted are left in unmerged state.  You would have to first
385 check which paths are conflicting with 'git status'
386 and after fixing them manually in your working tree, you would
387 stage the result as usual with 'git add':
389 ------------
390 $ git status | grep unmerged
391 unmerged: hello.c
392 $ edit hello.c
393 $ git add hello.c
394 ------------
396 After resolving conflicts and staging the result, `git ls-files -u`
397 would stop mentioning the conflicted path.  When you are done,
398 run `git commit` to finally record the merge:
400 ------------
401 $ git commit
402 ------------
404 As with the case to record your own changes, you can use `-a`
405 option to save typing.  One difference is that during a merge
406 resolution, you cannot use `git commit` with pathnames to
407 alter the order the changes are committed, because the merge
408 should be recorded as a single commit.  In fact, the command
409 refuses to run when given pathnames (but see `-i` option).
412 DISCUSSION
413 ----------
415 Though not required, it's a good idea to begin the commit message
416 with a single short (less than 50 character) line summarizing the
417 change, followed by a blank line and then a more thorough description.
418 The text up to the first blank line in a commit message is treated
419 as the commit title, and that title is used throughout Git.
420 For example, linkgit:git-format-patch[1] turns a commit into email, and it uses
421 the title on the Subject line and the rest of the commit in the body.
423 include::i18n.txt[]
425 ENVIRONMENT AND CONFIGURATION VARIABLES
426 ---------------------------------------
427 The editor used to edit the commit log message will be chosen from the
428 GIT_EDITOR environment variable, the core.editor configuration variable, the
429 VISUAL environment variable, or the EDITOR environment variable (in that
430 order).  See linkgit:git-var[1] for details.
432 HOOKS
433 -----
434 This command can run `commit-msg`, `prepare-commit-msg`, `pre-commit`,
435 and `post-commit` hooks.  See linkgit:githooks[5] for more
436 information.
438 FILES
439 -----
441 `$GIT_DIR/COMMIT_EDITMSG`::
442         This file contains the commit message of a commit in progress.
443         If `git commit` exits due to an error before creating a commit,
444         any commit message that has been provided by the user (e.g., in
445         an editor session) will be available in this file, but will be
446         overwritten by the next invocation of `git commit`.
448 SEE ALSO
449 --------
450 linkgit:git-add[1],
451 linkgit:git-rm[1],
452 linkgit:git-mv[1],
453 linkgit:git-merge[1],
454 linkgit:git-commit-tree[1]
458 Part of the linkgit:git[1] suite