branch: add test for -m renaming multiple config sections
[git.git] / Documentation / git-add.txt
blob7ed63dce0b1f55325497b4fd6879422fe119eaf5
1 git-add(1)
2 ==========
4 NAME
5 ----
6 git-add - Add file contents to the index
8 SYNOPSIS
9 --------
10 [verse]
11 'git add' [--verbose | -v] [--dry-run | -n] [--force | -f] [--interactive | -i] [--patch | -p]
12           [--edit | -e] [--[no-]all | --[no-]ignore-removal | [--update | -u]]
13           [--intent-to-add | -N] [--refresh] [--ignore-errors] [--ignore-missing]
14           [--chmod=(+|-)x] [--] [<pathspec>...]
16 DESCRIPTION
17 -----------
18 This command updates the index using the current content found in
19 the working tree, to prepare the content staged for the next commit.
20 It typically adds the current content of existing paths as a whole,
21 but with some options it can also be used to add content with
22 only part of the changes made to the working tree files applied, or
23 remove paths that do not exist in the working tree anymore.
25 The "index" holds a snapshot of the content of the working tree, and it
26 is this snapshot that is taken as the contents of the next commit.  Thus
27 after making any changes to the working tree, and before running
28 the commit command, you must use the `add` command to add any new or
29 modified files to the index.
31 This command can be performed multiple times before a commit.  It only
32 adds the content of the specified file(s) at the time the add command is
33 run; if you want subsequent changes included in the next commit, then
34 you must run `git add` again to add the new content to the index.
36 The `git status` command can be used to obtain a summary of which
37 files have changes that are staged for the next commit.
39 The `git add` command will not add ignored files by default.  If any
40 ignored files were explicitly specified on the command line, `git add`
41 will fail with a list of ignored files.  Ignored files reached by
42 directory recursion or filename globbing performed by Git (quote your
43 globs before the shell) will be silently ignored.  The 'git add' command can
44 be used to add ignored files with the `-f` (force) option.
46 Please see linkgit:git-commit[1] for alternative ways to add content to a
47 commit.
50 OPTIONS
51 -------
52 <pathspec>...::
53         Files to add content from.  Fileglobs (e.g. `*.c`) can
54         be given to add all matching files.  Also a
55         leading directory name (e.g. `dir` to add `dir/file1`
56         and `dir/file2`) can be given to update the index to
57         match the current state of the directory as a whole (e.g.
58         specifying `dir` will record not just a file `dir/file1`
59         modified in the working tree, a file `dir/file2` added to
60         the working tree, but also a file `dir/file3` removed from
61         the working tree.  Note that older versions of Git used
62         to ignore removed files; use `--no-all` option if you want
63         to add modified or new files but ignore removed ones.
65 -n::
66 --dry-run::
67         Don't actually add the file(s), just show if they exist and/or will
68         be ignored.
70 -v::
71 --verbose::
72         Be verbose.
74 -f::
75 --force::
76         Allow adding otherwise ignored files.
78 -i::
79 --interactive::
80         Add modified contents in the working tree interactively to
81         the index. Optional path arguments may be supplied to limit
82         operation to a subset of the working tree. See ``Interactive
83         mode'' for details.
85 -p::
86 --patch::
87         Interactively choose hunks of patch between the index and the
88         work tree and add them to the index. This gives the user a chance
89         to review the difference before adding modified contents to the
90         index.
92 This effectively runs `add --interactive`, but bypasses the
93 initial command menu and directly jumps to the `patch` subcommand.
94 See ``Interactive mode'' for details.
96 -e::
97 --edit::
98         Open the diff vs. the index in an editor and let the user
99         edit it.  After the editor was closed, adjust the hunk headers
100         and apply the patch to the index.
102 The intent of this option is to pick and choose lines of the patch to
103 apply, or even to modify the contents of lines to be staged. This can be
104 quicker and more flexible than using the interactive hunk selector.
105 However, it is easy to confuse oneself and create a patch that does not
106 apply to the index. See EDITING PATCHES below.
108 -u::
109 --update::
110         Update the index just where it already has an entry matching
111         <pathspec>.  This removes as well as modifies index entries to
112         match the working tree, but adds no new files.
114 If no <pathspec> is given when `-u` option is used, all
115 tracked files in the entire working tree are updated (old versions
116 of Git used to limit the update to the current directory and its
117 subdirectories).
119 -A::
120 --all::
121 --no-ignore-removal::
122         Update the index not only where the working tree has a file
123         matching <pathspec> but also where the index already has an
124         entry.  This adds, modifies, and removes index entries to
125         match the working tree.
127 If no <pathspec> is given when `-A` option is used, all
128 files in the entire working tree are updated (old versions
129 of Git used to limit the update to the current directory and its
130 subdirectories).
132 --no-all::
133 --ignore-removal::
134         Update the index by adding new files that are unknown to the
135         index and files modified in the working tree, but ignore
136         files that have been removed from the working tree.  This
137         option is a no-op when no <pathspec> is used.
139 This option is primarily to help users who are used to older
140 versions of Git, whose "git add <pathspec>..." was a synonym
141 for "git add --no-all <pathspec>...", i.e. ignored removed files.
143 -N::
144 --intent-to-add::
145         Record only the fact that the path will be added later. An entry
146         for the path is placed in the index with no content. This is
147         useful for, among other things, showing the unstaged content of
148         such files with `git diff` and committing them with `git commit
149         -a`.
151 --refresh::
152         Don't add the file(s), but only refresh their stat()
153         information in the index.
155 --ignore-errors::
156         If some files could not be added because of errors indexing
157         them, do not abort the operation, but continue adding the
158         others. The command shall still exit with non-zero status.
159         The configuration variable `add.ignoreErrors` can be set to
160         true to make this the default behaviour.
162 --ignore-missing::
163         This option can only be used together with --dry-run. By using
164         this option the user can check if any of the given files would
165         be ignored, no matter if they are already present in the work
166         tree or not.
168 --chmod=(+|-)x::
169         Override the executable bit of the added files.  The executable
170         bit is only changed in the index, the files on disk are left
171         unchanged.
173 \--::
174         This option can be used to separate command-line options from
175         the list of files, (useful when filenames might be mistaken
176         for command-line options).
179 Configuration
180 -------------
182 The optional configuration variable `core.excludesFile` indicates a path to a
183 file containing patterns of file names to exclude from git-add, similar to
184 $GIT_DIR/info/exclude.  Patterns in the exclude file are used in addition to
185 those in info/exclude.  See linkgit:gitignore[5].
188 EXAMPLES
189 --------
191 * Adds content from all `*.txt` files under `Documentation` directory
192 and its subdirectories:
194 ------------
195 $ git add Documentation/\*.txt
196 ------------
198 Note that the asterisk `*` is quoted from the shell in this
199 example; this lets the command include the files from
200 subdirectories of `Documentation/` directory.
202 * Considers adding content from all git-*.sh scripts:
204 ------------
205 $ git add git-*.sh
206 ------------
208 Because this example lets the shell expand the asterisk (i.e. you are
209 listing the files explicitly), it does not consider
210 `subdir/git-foo.sh`.
212 Interactive mode
213 ----------------
214 When the command enters the interactive mode, it shows the
215 output of the 'status' subcommand, and then goes into its
216 interactive command loop.
218 The command loop shows the list of subcommands available, and
219 gives a prompt "What now> ".  In general, when the prompt ends
220 with a single '>', you can pick only one of the choices given
221 and type return, like this:
223 ------------
224     *** Commands ***
225       1: status       2: update       3: revert       4: add untracked
226       5: patch        6: diff         7: quit         8: help
227     What now> 1
228 ------------
230 You also could say `s` or `sta` or `status` above as long as the
231 choice is unique.
233 The main command loop has 6 subcommands (plus help and quit).
235 status::
237    This shows the change between HEAD and index (i.e. what will be
238    committed if you say `git commit`), and between index and
239    working tree files (i.e. what you could stage further before
240    `git commit` using `git add`) for each path.  A sample output
241    looks like this:
243 ------------
244               staged     unstaged path
245      1:       binary      nothing foo.png
246      2:     +403/-35        +1/-1 git-add--interactive.perl
247 ------------
249 It shows that foo.png has differences from HEAD (but that is
250 binary so line count cannot be shown) and there is no
251 difference between indexed copy and the working tree
252 version (if the working tree version were also different,
253 'binary' would have been shown in place of 'nothing').  The
254 other file, git-add{litdd}interactive.perl, has 403 lines added
255 and 35 lines deleted if you commit what is in the index, but
256 working tree file has further modifications (one addition and
257 one deletion).
259 update::
261    This shows the status information and issues an "Update>>"
262    prompt.  When the prompt ends with double '>>', you can
263    make more than one selection, concatenated with whitespace or
264    comma.  Also you can say ranges.  E.g. "2-5 7,9" to choose
265    2,3,4,5,7,9 from the list.  If the second number in a range is
266    omitted, all remaining patches are taken.  E.g. "7-" to choose
267    7,8,9 from the list.  You can say '*' to choose everything.
269 What you chose are then highlighted with '*',
270 like this:
272 ------------
273            staged     unstaged path
274   1:       binary      nothing foo.png
275 * 2:     +403/-35        +1/-1 git-add--interactive.perl
276 ------------
278 To remove selection, prefix the input with `-`
279 like this:
281 ------------
282 Update>> -2
283 ------------
285 After making the selection, answer with an empty line to stage the
286 contents of working tree files for selected paths in the index.
288 revert::
290   This has a very similar UI to 'update', and the staged
291   information for selected paths are reverted to that of the
292   HEAD version.  Reverting new paths makes them untracked.
294 add untracked::
296   This has a very similar UI to 'update' and
297   'revert', and lets you add untracked paths to the index.
299 patch::
301   This lets you choose one path out of a 'status' like selection.
302   After choosing the path, it presents the diff between the index
303   and the working tree file and asks you if you want to stage
304   the change of each hunk.  You can select one of the following
305   options and type return:
307        y - stage this hunk
308        n - do not stage this hunk
309        q - quit; do not stage this hunk or any of the remaining ones
310        a - stage this hunk and all later hunks in the file
311        d - do not stage this hunk or any of the later hunks in the file
312        g - select a hunk to go to
313        / - search for a hunk matching the given regex
314        j - leave this hunk undecided, see next undecided hunk
315        J - leave this hunk undecided, see next hunk
316        k - leave this hunk undecided, see previous undecided hunk
317        K - leave this hunk undecided, see previous hunk
318        s - split the current hunk into smaller hunks
319        e - manually edit the current hunk
320        ? - print help
322 After deciding the fate for all hunks, if there is any hunk
323 that was chosen, the index is updated with the selected hunks.
325 You can omit having to type return here, by setting the configuration
326 variable `interactive.singleKey` to `true`.
328 diff::
330   This lets you review what will be committed (i.e. between
331   HEAD and index).
334 EDITING PATCHES
335 ---------------
337 Invoking `git add -e` or selecting `e` from the interactive hunk
338 selector will open a patch in your editor; after the editor exits, the
339 result is applied to the index. You are free to make arbitrary changes
340 to the patch, but note that some changes may have confusing results, or
341 even result in a patch that cannot be applied.  If you want to abort the
342 operation entirely (i.e., stage nothing new in the index), simply delete
343 all lines of the patch. The list below describes some common things you
344 may see in a patch, and which editing operations make sense on them.
347 added content::
349 Added content is represented by lines beginning with "{plus}". You can
350 prevent staging any addition lines by deleting them.
352 removed content::
354 Removed content is represented by lines beginning with "-". You can
355 prevent staging their removal by converting the "-" to a " " (space).
357 modified content::
359 Modified content is represented by "-" lines (removing the old content)
360 followed by "{plus}" lines (adding the replacement content). You can
361 prevent staging the modification by converting "-" lines to " ", and
362 removing "{plus}" lines. Beware that modifying only half of the pair is
363 likely to introduce confusing changes to the index.
366 There are also more complex operations that can be performed. But beware
367 that because the patch is applied only to the index and not the working
368 tree, the working tree will appear to "undo" the change in the index.
369 For example, introducing a new line into the index that is in neither
370 the HEAD nor the working tree will stage the new line for commit, but
371 the line will appear to be reverted in the working tree.
373 Avoid using these constructs, or do so with extreme caution.
376 removing untouched content::
378 Content which does not differ between the index and working tree may be
379 shown on context lines, beginning with a " " (space).  You can stage
380 context lines for removal by converting the space to a "-". The
381 resulting working tree file will appear to re-add the content.
383 modifying existing content::
385 One can also modify context lines by staging them for removal (by
386 converting " " to "-") and adding a "{plus}" line with the new content.
387 Similarly, one can modify "{plus}" lines for existing additions or
388 modifications. In all cases, the new modification will appear reverted
389 in the working tree.
391 new content::
393 You may also add new content that does not exist in the patch; simply
394 add new lines, each starting with "{plus}". The addition will appear
395 reverted in the working tree.
398 There are also several operations which should be avoided entirely, as
399 they will make the patch impossible to apply:
401 * adding context (" ") or removal ("-") lines
402 * deleting context or removal lines
403 * modifying the contents of context or removal lines
405 SEE ALSO
406 --------
407 linkgit:git-status[1]
408 linkgit:git-rm[1]
409 linkgit:git-reset[1]
410 linkgit:git-mv[1]
411 linkgit:git-commit[1]
412 linkgit:git-update-index[1]
416 Part of the linkgit:git[1] suite