unpack_entry: avoid freeing objects in base cache
[git.git] / Documentation / gitattributes.txt
blobb322a2666ce38debd993e330f5ded9bf2e32b578
1 gitattributes(5)
2 ================
4 NAME
5 ----
6 gitattributes - defining attributes per path
8 SYNOPSIS
9 --------
10 $GIT_DIR/info/attributes, .gitattributes
13 DESCRIPTION
14 -----------
16 A `gitattributes` file is a simple text file that gives
17 `attributes` to pathnames.
19 Each line in `gitattributes` file is of form:
21         pattern attr1 attr2 ...
23 That is, a pattern followed by an attributes list,
24 separated by whitespaces.  When the pattern matches the
25 path in question, the attributes listed on the line are given to
26 the path.
28 Each attribute can be in one of these states for a given path:
30 Set::
32         The path has the attribute with special value "true";
33         this is specified by listing only the name of the
34         attribute in the attribute list.
36 Unset::
38         The path has the attribute with special value "false";
39         this is specified by listing the name of the attribute
40         prefixed with a dash `-` in the attribute list.
42 Set to a value::
44         The path has the attribute with specified string value;
45         this is specified by listing the name of the attribute
46         followed by an equal sign `=` and its value in the
47         attribute list.
49 Unspecified::
51         No pattern matches the path, and nothing says if
52         the path has or does not have the attribute, the
53         attribute for the path is said to be Unspecified.
55 When more than one pattern matches the path, a later line
56 overrides an earlier line.  This overriding is done per
57 attribute.  The rules how the pattern matches paths are the
58 same as in `.gitignore` files; see linkgit:gitignore[5].
59 Unlike `.gitignore`, negative patterns are forbidden.
61 When deciding what attributes are assigned to a path, Git
62 consults `$GIT_DIR/info/attributes` file (which has the highest
63 precedence), `.gitattributes` file in the same directory as the
64 path in question, and its parent directories up to the toplevel of the
65 work tree (the further the directory that contains `.gitattributes`
66 is from the path in question, the lower its precedence). Finally
67 global and system-wide files are considered (they have the lowest
68 precedence).
70 When the `.gitattributes` file is missing from the work tree, the
71 path in the index is used as a fall-back.  During checkout process,
72 `.gitattributes` in the index is used and then the file in the
73 working tree is used as a fall-back.
75 If you wish to affect only a single repository (i.e., to assign
76 attributes to files that are particular to
77 one user's workflow for that repository), then
78 attributes should be placed in the `$GIT_DIR/info/attributes` file.
79 Attributes which should be version-controlled and distributed to other
80 repositories (i.e., attributes of interest to all users) should go into
81 `.gitattributes` files. Attributes that should affect all repositories
82 for a single user should be placed in a file specified by the
83 `core.attributesfile` configuration option (see linkgit:git-config[1]).
84 Its default value is $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME
85 is either not set or empty, $HOME/.config/git/attributes is used instead.
86 Attributes for all users on a system should be placed in the
87 `$(prefix)/etc/gitattributes` file.
89 Sometimes you would need to override an setting of an attribute
90 for a path to `Unspecified` state.  This can be done by listing
91 the name of the attribute prefixed with an exclamation point `!`.
94 EFFECTS
95 -------
97 Certain operations by Git can be influenced by assigning
98 particular attributes to a path.  Currently, the following
99 operations are attributes-aware.
101 Checking-out and checking-in
102 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
104 These attributes affect how the contents stored in the
105 repository are copied to the working tree files when commands
106 such as 'git checkout' and 'git merge' run.  They also affect how
107 Git stores the contents you prepare in the working tree in the
108 repository upon 'git add' and 'git commit'.
110 `text`
111 ^^^^^^
113 This attribute enables and controls end-of-line normalization.  When a
114 text file is normalized, its line endings are converted to LF in the
115 repository.  To control what line ending style is used in the working
116 directory, use the `eol` attribute for a single file and the
117 `core.eol` configuration variable for all text files.
119 Set::
121         Setting the `text` attribute on a path enables end-of-line
122         normalization and marks the path as a text file.  End-of-line
123         conversion takes place without guessing the content type.
125 Unset::
127         Unsetting the `text` attribute on a path tells Git not to
128         attempt any end-of-line conversion upon checkin or checkout.
130 Set to string value "auto"::
132         When `text` is set to "auto", the path is marked for automatic
133         end-of-line normalization.  If Git decides that the content is
134         text, its line endings are normalized to LF on checkin.
136 Unspecified::
138         If the `text` attribute is unspecified, Git uses the
139         `core.autocrlf` configuration variable to determine if the
140         file should be converted.
142 Any other value causes Git to act as if `text` has been left
143 unspecified.
145 `eol`
146 ^^^^^
148 This attribute sets a specific line-ending style to be used in the
149 working directory.  It enables end-of-line normalization without any
150 content checks, effectively setting the `text` attribute.
152 Set to string value "crlf"::
154         This setting forces Git to normalize line endings for this
155         file on checkin and convert them to CRLF when the file is
156         checked out.
158 Set to string value "lf"::
160         This setting forces Git to normalize line endings to LF on
161         checkin and prevents conversion to CRLF when the file is
162         checked out.
164 Backwards compatibility with `crlf` attribute
165 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
167 For backwards compatibility, the `crlf` attribute is interpreted as
168 follows:
170 ------------------------
171 crlf            text
172 -crlf           -text
173 crlf=input      eol=lf
174 ------------------------
176 End-of-line conversion
177 ^^^^^^^^^^^^^^^^^^^^^^
179 While Git normally leaves file contents alone, it can be configured to
180 normalize line endings to LF in the repository and, optionally, to
181 convert them to CRLF when files are checked out.
183 Here is an example that will make Git normalize .txt, .vcproj and .sh
184 files, ensure that .vcproj files have CRLF and .sh files have LF in
185 the working directory, and prevent .jpg files from being normalized
186 regardless of their content.
188 ------------------------
189 *.txt           text
190 *.vcproj        eol=crlf
191 *.sh            eol=lf
192 *.jpg           -text
193 ------------------------
195 Other source code management systems normalize all text files in their
196 repositories, and there are two ways to enable similar automatic
197 normalization in Git.
199 If you simply want to have CRLF line endings in your working directory
200 regardless of the repository you are working with, you can set the
201 config variable "core.autocrlf" without changing any attributes.
203 ------------------------
204 [core]
205         autocrlf = true
206 ------------------------
208 This does not force normalization of all text files, but does ensure
209 that text files that you introduce to the repository have their line
210 endings normalized to LF when they are added, and that files that are
211 already normalized in the repository stay normalized.
213 If you want to interoperate with a source code management system that
214 enforces end-of-line normalization, or you simply want all text files
215 in your repository to be normalized, you should instead set the `text`
216 attribute to "auto" for _all_ files.
218 ------------------------
219 *       text=auto
220 ------------------------
222 This ensures that all files that Git considers to be text will have
223 normalized (LF) line endings in the repository.  The `core.eol`
224 configuration variable controls which line endings Git will use for
225 normalized files in your working directory; the default is to use the
226 native line ending for your platform, or CRLF if `core.autocrlf` is
227 set.
229 NOTE: When `text=auto` normalization is enabled in an existing
230 repository, any text files containing CRLFs should be normalized.  If
231 they are not they will be normalized the next time someone tries to
232 change them, causing unfortunate misattribution.  From a clean working
233 directory:
235 -------------------------------------------------
236 $ echo "* text=auto" >>.gitattributes
237 $ rm .git/index     # Remove the index to force Git to
238 $ git reset         # re-scan the working directory
239 $ git status        # Show files that will be normalized
240 $ git add -u
241 $ git add .gitattributes
242 $ git commit -m "Introduce end-of-line normalization"
243 -------------------------------------------------
245 If any files that should not be normalized show up in 'git status',
246 unset their `text` attribute before running 'git add -u'.
248 ------------------------
249 manual.pdf      -text
250 ------------------------
252 Conversely, text files that Git does not detect can have normalization
253 enabled manually.
255 ------------------------
256 weirdchars.txt  text
257 ------------------------
259 If `core.safecrlf` is set to "true" or "warn", Git verifies if
260 the conversion is reversible for the current setting of
261 `core.autocrlf`.  For "true", Git rejects irreversible
262 conversions; for "warn", Git only prints a warning but accepts
263 an irreversible conversion.  The safety triggers to prevent such
264 a conversion done to the files in the work tree, but there are a
265 few exceptions.  Even though...
267 - 'git add' itself does not touch the files in the work tree, the
268   next checkout would, so the safety triggers;
270 - 'git apply' to update a text file with a patch does touch the files
271   in the work tree, but the operation is about text files and CRLF
272   conversion is about fixing the line ending inconsistencies, so the
273   safety does not trigger;
275 - 'git diff' itself does not touch the files in the work tree, it is
276   often run to inspect the changes you intend to next 'git add'.  To
277   catch potential problems early, safety triggers.
280 `ident`
281 ^^^^^^^
283 When the attribute `ident` is set for a path, Git replaces
284 `$Id$` in the blob object with `$Id:`, followed by the
285 40-character hexadecimal blob object name, followed by a dollar
286 sign `$` upon checkout.  Any byte sequence that begins with
287 `$Id:` and ends with `$` in the worktree file is replaced
288 with `$Id$` upon check-in.
291 `filter`
292 ^^^^^^^^
294 A `filter` attribute can be set to a string value that names a
295 filter driver specified in the configuration.
297 A filter driver consists of a `clean` command and a `smudge`
298 command, either of which can be left unspecified.  Upon
299 checkout, when the `smudge` command is specified, the command is
300 fed the blob object from its standard input, and its standard
301 output is used to update the worktree file.  Similarly, the
302 `clean` command is used to convert the contents of worktree file
303 upon checkin.
305 One use of the content filtering is to massage the content into a shape
306 that is more convenient for the platform, filesystem, and the user to use.
307 For this mode of operation, the key phrase here is "more convenient" and
308 not "turning something unusable into usable".  In other words, the intent
309 is that if someone unsets the filter driver definition, or does not have
310 the appropriate filter program, the project should still be usable.
312 Another use of the content filtering is to store the content that cannot
313 be directly used in the repository (e.g. a UUID that refers to the true
314 content stored outside Git, or an encrypted content) and turn it into a
315 usable form upon checkout (e.g. download the external content, or decrypt
316 the encrypted content).
318 These two filters behave differently, and by default, a filter is taken as
319 the former, massaging the contents into more convenient shape.  A missing
320 filter driver definition in the config, or a filter driver that exits with
321 a non-zero status, is not an error but makes the filter a no-op passthru.
323 You can declare that a filter turns a content that by itself is unusable
324 into a usable content by setting the filter.<driver>.required configuration
325 variable to `true`.
327 For example, in .gitattributes, you would assign the `filter`
328 attribute for paths.
330 ------------------------
331 *.c     filter=indent
332 ------------------------
334 Then you would define a "filter.indent.clean" and "filter.indent.smudge"
335 configuration in your .git/config to specify a pair of commands to
336 modify the contents of C programs when the source files are checked
337 in ("clean" is run) and checked out (no change is made because the
338 command is "cat").
340 ------------------------
341 [filter "indent"]
342         clean = indent
343         smudge = cat
344 ------------------------
346 For best results, `clean` should not alter its output further if it is
347 run twice ("clean->clean" should be equivalent to "clean"), and
348 multiple `smudge` commands should not alter `clean`'s output
349 ("smudge->smudge->clean" should be equivalent to "clean").  See the
350 section on merging below.
352 The "indent" filter is well-behaved in this regard: it will not modify
353 input that is already correctly indented.  In this case, the lack of a
354 smudge filter means that the clean filter _must_ accept its own output
355 without modifying it.
357 If a filter _must_ succeed in order to make the stored contents usable,
358 you can declare that the filter is `required`, in the configuration:
360 ------------------------
361 [filter "crypt"]
362         clean = openssl enc ...
363         smudge = openssl enc -d ...
364         required
365 ------------------------
367 Sequence "%f" on the filter command line is replaced with the name of
368 the file the filter is working on.  A filter might use this in keyword
369 substitution.  For example:
371 ------------------------
372 [filter "p4"]
373         clean = git-p4-filter --clean %f
374         smudge = git-p4-filter --smudge %f
375 ------------------------
378 Interaction between checkin/checkout attributes
379 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
381 In the check-in codepath, the worktree file is first converted
382 with `filter` driver (if specified and corresponding driver
383 defined), then the result is processed with `ident` (if
384 specified), and then finally with `text` (again, if specified
385 and applicable).
387 In the check-out codepath, the blob content is first converted
388 with `text`, and then `ident` and fed to `filter`.
391 Merging branches with differing checkin/checkout attributes
392 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
394 If you have added attributes to a file that cause the canonical
395 repository format for that file to change, such as adding a
396 clean/smudge filter or text/eol/ident attributes, merging anything
397 where the attribute is not in place would normally cause merge
398 conflicts.
400 To prevent these unnecessary merge conflicts, Git can be told to run a
401 virtual check-out and check-in of all three stages of a file when
402 resolving a three-way merge by setting the `merge.renormalize`
403 configuration variable.  This prevents changes caused by check-in
404 conversion from causing spurious merge conflicts when a converted file
405 is merged with an unconverted file.
407 As long as a "smudge->clean" results in the same output as a "clean"
408 even on files that are already smudged, this strategy will
409 automatically resolve all filter-related conflicts.  Filters that do
410 not act in this way may cause additional merge conflicts that must be
411 resolved manually.
414 Generating diff text
415 ~~~~~~~~~~~~~~~~~~~~
417 `diff`
418 ^^^^^^
420 The attribute `diff` affects how Git generates diffs for particular
421 files. It can tell Git whether to generate a textual patch for the path
422 or to treat the path as a binary file.  It can also affect what line is
423 shown on the hunk header `@@ -k,l +n,m @@` line, tell Git to use an
424 external command to generate the diff, or ask Git to convert binary
425 files to a text format before generating the diff.
427 Set::
429         A path to which the `diff` attribute is set is treated
430         as text, even when they contain byte values that
431         normally never appear in text files, such as NUL.
433 Unset::
435         A path to which the `diff` attribute is unset will
436         generate `Binary files differ` (or a binary patch, if
437         binary patches are enabled).
439 Unspecified::
441         A path to which the `diff` attribute is unspecified
442         first gets its contents inspected, and if it looks like
443         text, it is treated as text.  Otherwise it would
444         generate `Binary files differ`.
446 String::
448         Diff is shown using the specified diff driver.  Each driver may
449         specify one or more options, as described in the following
450         section. The options for the diff driver "foo" are defined
451         by the configuration variables in the "diff.foo" section of the
452         Git config file.
455 Defining an external diff driver
456 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
458 The definition of a diff driver is done in `gitconfig`, not
459 `gitattributes` file, so strictly speaking this manual page is a
460 wrong place to talk about it.  However...
462 To define an external diff driver `jcdiff`, add a section to your
463 `$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this:
465 ----------------------------------------------------------------
466 [diff "jcdiff"]
467         command = j-c-diff
468 ----------------------------------------------------------------
470 When Git needs to show you a diff for the path with `diff`
471 attribute set to `jcdiff`, it calls the command you specified
472 with the above configuration, i.e. `j-c-diff`, with 7
473 parameters, just like `GIT_EXTERNAL_DIFF` program is called.
474 See linkgit:git[1] for details.
477 Defining a custom hunk-header
478 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
480 Each group of changes (called a "hunk") in the textual diff output
481 is prefixed with a line of the form:
483         @@ -k,l +n,m @@ TEXT
485 This is called a 'hunk header'.  The "TEXT" portion is by default a line
486 that begins with an alphabet, an underscore or a dollar sign; this
487 matches what GNU 'diff -p' output uses.  This default selection however
488 is not suited for some contents, and you can use a customized pattern
489 to make a selection.
491 First, in .gitattributes, you would assign the `diff` attribute
492 for paths.
494 ------------------------
495 *.tex   diff=tex
496 ------------------------
498 Then, you would define a "diff.tex.xfuncname" configuration to
499 specify a regular expression that matches a line that you would
500 want to appear as the hunk header "TEXT". Add a section to your
501 `$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this:
503 ------------------------
504 [diff "tex"]
505         xfuncname = "^(\\\\(sub)*section\\{.*)$"
506 ------------------------
508 Note.  A single level of backslashes are eaten by the
509 configuration file parser, so you would need to double the
510 backslashes; the pattern above picks a line that begins with a
511 backslash, and zero or more occurrences of `sub` followed by
512 `section` followed by open brace, to the end of line.
514 There are a few built-in patterns to make this easier, and `tex`
515 is one of them, so you do not have to write the above in your
516 configuration file (you still need to enable this with the
517 attribute mechanism, via `.gitattributes`).  The following built in
518 patterns are available:
520 - `ada` suitable for source code in the Ada language.
522 - `bibtex` suitable for files with BibTeX coded references.
524 - `cpp` suitable for source code in the C and C++ languages.
526 - `csharp` suitable for source code in the C# language.
528 - `fortran` suitable for source code in the Fortran language.
530 - `html` suitable for HTML/XHTML documents.
532 - `java` suitable for source code in the Java language.
534 - `matlab` suitable for source code in the MATLAB language.
536 - `objc` suitable for source code in the Objective-C language.
538 - `pascal` suitable for source code in the Pascal/Delphi language.
540 - `perl` suitable for source code in the Perl language.
542 - `php` suitable for source code in the PHP language.
544 - `python` suitable for source code in the Python language.
546 - `ruby` suitable for source code in the Ruby language.
548 - `tex` suitable for source code for LaTeX documents.
551 Customizing word diff
552 ^^^^^^^^^^^^^^^^^^^^^
554 You can customize the rules that `git diff --word-diff` uses to
555 split words in a line, by specifying an appropriate regular expression
556 in the "diff.*.wordRegex" configuration variable.  For example, in TeX
557 a backslash followed by a sequence of letters forms a command, but
558 several such commands can be run together without intervening
559 whitespace.  To separate them, use a regular expression in your
560 `$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this:
562 ------------------------
563 [diff "tex"]
564         wordRegex = "\\\\[a-zA-Z]+|[{}]|\\\\.|[^\\{}[:space:]]+"
565 ------------------------
567 A built-in pattern is provided for all languages listed in the
568 previous section.
571 Performing text diffs of binary files
572 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
574 Sometimes it is desirable to see the diff of a text-converted
575 version of some binary files. For example, a word processor
576 document can be converted to an ASCII text representation, and
577 the diff of the text shown. Even though this conversion loses
578 some information, the resulting diff is useful for human
579 viewing (but cannot be applied directly).
581 The `textconv` config option is used to define a program for
582 performing such a conversion. The program should take a single
583 argument, the name of a file to convert, and produce the
584 resulting text on stdout.
586 For example, to show the diff of the exif information of a
587 file instead of the binary information (assuming you have the
588 exif tool installed), add the following section to your
589 `$GIT_DIR/config` file (or `$HOME/.gitconfig` file):
591 ------------------------
592 [diff "jpg"]
593         textconv = exif
594 ------------------------
596 NOTE: The text conversion is generally a one-way conversion;
597 in this example, we lose the actual image contents and focus
598 just on the text data. This means that diffs generated by
599 textconv are _not_ suitable for applying. For this reason,
600 only `git diff` and the `git log` family of commands (i.e.,
601 log, whatchanged, show) will perform text conversion. `git
602 format-patch` will never generate this output. If you want to
603 send somebody a text-converted diff of a binary file (e.g.,
604 because it quickly conveys the changes you have made), you
605 should generate it separately and send it as a comment _in
606 addition to_ the usual binary diff that you might send.
608 Because text conversion can be slow, especially when doing a
609 large number of them with `git log -p`, Git provides a mechanism
610 to cache the output and use it in future diffs.  To enable
611 caching, set the "cachetextconv" variable in your diff driver's
612 config. For example:
614 ------------------------
615 [diff "jpg"]
616         textconv = exif
617         cachetextconv = true
618 ------------------------
620 This will cache the result of running "exif" on each blob
621 indefinitely. If you change the textconv config variable for a
622 diff driver, Git will automatically invalidate the cache entries
623 and re-run the textconv filter. If you want to invalidate the
624 cache manually (e.g., because your version of "exif" was updated
625 and now produces better output), you can remove the cache
626 manually with `git update-ref -d refs/notes/textconv/jpg` (where
627 "jpg" is the name of the diff driver, as in the example above).
629 Choosing textconv versus external diff
630 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
632 If you want to show differences between binary or specially-formatted
633 blobs in your repository, you can choose to use either an external diff
634 command, or to use textconv to convert them to a diff-able text format.
635 Which method you choose depends on your exact situation.
637 The advantage of using an external diff command is flexibility. You are
638 not bound to find line-oriented changes, nor is it necessary for the
639 output to resemble unified diff. You are free to locate and report
640 changes in the most appropriate way for your data format.
642 A textconv, by comparison, is much more limiting. You provide a
643 transformation of the data into a line-oriented text format, and Git
644 uses its regular diff tools to generate the output. There are several
645 advantages to choosing this method:
647 1. Ease of use. It is often much simpler to write a binary to text
648    transformation than it is to perform your own diff. In many cases,
649    existing programs can be used as textconv filters (e.g., exif,
650    odt2txt).
652 2. Git diff features. By performing only the transformation step
653    yourself, you can still utilize many of Git's diff features,
654    including colorization, word-diff, and combined diffs for merges.
656 3. Caching. Textconv caching can speed up repeated diffs, such as those
657    you might trigger by running `git log -p`.
660 Marking files as binary
661 ^^^^^^^^^^^^^^^^^^^^^^^
663 Git usually guesses correctly whether a blob contains text or binary
664 data by examining the beginning of the contents. However, sometimes you
665 may want to override its decision, either because a blob contains binary
666 data later in the file, or because the content, while technically
667 composed of text characters, is opaque to a human reader. For example,
668 many postscript files contain only ascii characters, but produce noisy
669 and meaningless diffs.
671 The simplest way to mark a file as binary is to unset the diff
672 attribute in the `.gitattributes` file:
674 ------------------------
675 *.ps -diff
676 ------------------------
678 This will cause Git to generate `Binary files differ` (or a binary
679 patch, if binary patches are enabled) instead of a regular diff.
681 However, one may also want to specify other diff driver attributes. For
682 example, you might want to use `textconv` to convert postscript files to
683 an ascii representation for human viewing, but otherwise treat them as
684 binary files. You cannot specify both `-diff` and `diff=ps` attributes.
685 The solution is to use the `diff.*.binary` config option:
687 ------------------------
688 [diff "ps"]
689   textconv = ps2ascii
690   binary = true
691 ------------------------
693 Performing a three-way merge
694 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
696 `merge`
697 ^^^^^^^
699 The attribute `merge` affects how three versions of a file are
700 merged when a file-level merge is necessary during `git merge`,
701 and other commands such as `git revert` and `git cherry-pick`.
703 Set::
705         Built-in 3-way merge driver is used to merge the
706         contents in a way similar to 'merge' command of `RCS`
707         suite.  This is suitable for ordinary text files.
709 Unset::
711         Take the version from the current branch as the
712         tentative merge result, and declare that the merge has
713         conflicts.  This is suitable for binary files that do
714         not have a well-defined merge semantics.
716 Unspecified::
718         By default, this uses the same built-in 3-way merge
719         driver as is the case when the `merge` attribute is set.
720         However, the `merge.default` configuration variable can name
721         different merge driver to be used with paths for which the
722         `merge` attribute is unspecified.
724 String::
726         3-way merge is performed using the specified custom
727         merge driver.  The built-in 3-way merge driver can be
728         explicitly specified by asking for "text" driver; the
729         built-in "take the current branch" driver can be
730         requested with "binary".
733 Built-in merge drivers
734 ^^^^^^^^^^^^^^^^^^^^^^
736 There are a few built-in low-level merge drivers defined that
737 can be asked for via the `merge` attribute.
739 text::
741         Usual 3-way file level merge for text files.  Conflicted
742         regions are marked with conflict markers `<<<<<<<`,
743         `=======` and `>>>>>>>`.  The version from your branch
744         appears before the `=======` marker, and the version
745         from the merged branch appears after the `=======`
746         marker.
748 binary::
750         Keep the version from your branch in the work tree, but
751         leave the path in the conflicted state for the user to
752         sort out.
754 union::
756         Run 3-way file level merge for text files, but take
757         lines from both versions, instead of leaving conflict
758         markers.  This tends to leave the added lines in the
759         resulting file in random order and the user should
760         verify the result. Do not use this if you do not
761         understand the implications.
764 Defining a custom merge driver
765 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
767 The definition of a merge driver is done in the `.git/config`
768 file, not in the `gitattributes` file, so strictly speaking this
769 manual page is a wrong place to talk about it.  However...
771 To define a custom merge driver `filfre`, add a section to your
772 `$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this:
774 ----------------------------------------------------------------
775 [merge "filfre"]
776         name = feel-free merge driver
777         driver = filfre %O %A %B
778         recursive = binary
779 ----------------------------------------------------------------
781 The `merge.*.name` variable gives the driver a human-readable
782 name.
784 The `merge.*.driver` variable's value is used to construct a
785 command to run to merge ancestor's version (`%O`), current
786 version (`%A`) and the other branches' version (`%B`).  These
787 three tokens are replaced with the names of temporary files that
788 hold the contents of these versions when the command line is
789 built. Additionally, %L will be replaced with the conflict marker
790 size (see below).
792 The merge driver is expected to leave the result of the merge in
793 the file named with `%A` by overwriting it, and exit with zero
794 status if it managed to merge them cleanly, or non-zero if there
795 were conflicts.
797 The `merge.*.recursive` variable specifies what other merge
798 driver to use when the merge driver is called for an internal
799 merge between common ancestors, when there are more than one.
800 When left unspecified, the driver itself is used for both
801 internal merge and the final merge.
804 `conflict-marker-size`
805 ^^^^^^^^^^^^^^^^^^^^^^
807 This attribute controls the length of conflict markers left in
808 the work tree file during a conflicted merge.  Only setting to
809 the value to a positive integer has any meaningful effect.
811 For example, this line in `.gitattributes` can be used to tell the merge
812 machinery to leave much longer (instead of the usual 7-character-long)
813 conflict markers when merging the file `Documentation/git-merge.txt`
814 results in a conflict.
816 ------------------------
817 Documentation/git-merge.txt     conflict-marker-size=32
818 ------------------------
821 Checking whitespace errors
822 ~~~~~~~~~~~~~~~~~~~~~~~~~~
824 `whitespace`
825 ^^^^^^^^^^^^
827 The `core.whitespace` configuration variable allows you to define what
828 'diff' and 'apply' should consider whitespace errors for all paths in
829 the project (See linkgit:git-config[1]).  This attribute gives you finer
830 control per path.
832 Set::
834         Notice all types of potential whitespace errors known to Git.
835         The tab width is taken from the value of the `core.whitespace`
836         configuration variable.
838 Unset::
840         Do not notice anything as error.
842 Unspecified::
844         Use the value of the `core.whitespace` configuration variable to
845         decide what to notice as error.
847 String::
849         Specify a comma separate list of common whitespace problems to
850         notice in the same format as the `core.whitespace` configuration
851         variable.
854 Creating an archive
855 ~~~~~~~~~~~~~~~~~~~
857 `export-ignore`
858 ^^^^^^^^^^^^^^^
860 Files and directories with the attribute `export-ignore` won't be added to
861 archive files.
863 `export-subst`
864 ^^^^^^^^^^^^^^
866 If the attribute `export-subst` is set for a file then Git will expand
867 several placeholders when adding this file to an archive.  The
868 expansion depends on the availability of a commit ID, i.e., if
869 linkgit:git-archive[1] has been given a tree instead of a commit or a
870 tag then no replacement will be done.  The placeholders are the same
871 as those for the option `--pretty=format:` of linkgit:git-log[1],
872 except that they need to be wrapped like this: `$Format:PLACEHOLDERS$`
873 in the file.  E.g. the string `$Format:%H$` will be replaced by the
874 commit hash.
877 Packing objects
878 ~~~~~~~~~~~~~~~
880 `delta`
881 ^^^^^^^
883 Delta compression will not be attempted for blobs for paths with the
884 attribute `delta` set to false.
887 Viewing files in GUI tools
888 ~~~~~~~~~~~~~~~~~~~~~~~~~~
890 `encoding`
891 ^^^^^^^^^^
893 The value of this attribute specifies the character encoding that should
894 be used by GUI tools (e.g. linkgit:gitk[1] and linkgit:git-gui[1]) to
895 display the contents of the relevant file. Note that due to performance
896 considerations linkgit:gitk[1] does not use this attribute unless you
897 manually enable per-file encodings in its options.
899 If this attribute is not set or has an invalid value, the value of the
900 `gui.encoding` configuration variable is used instead
901 (See linkgit:git-config[1]).
904 USING MACRO ATTRIBUTES
905 ----------------------
907 You do not want any end-of-line conversions applied to, nor textual diffs
908 produced for, any binary file you track.  You would need to specify e.g.
910 ------------
911 *.jpg -text -diff
912 ------------
914 but that may become cumbersome, when you have many attributes.  Using
915 macro attributes, you can define an attribute that, when set, also
916 sets or unsets a number of other attributes at the same time.  The
917 system knows a built-in macro attribute, `binary`:
919 ------------
920 *.jpg binary
921 ------------
923 Setting the "binary" attribute also unsets the "text" and "diff"
924 attributes as above.  Note that macro attributes can only be "Set",
925 though setting one might have the effect of setting or unsetting other
926 attributes or even returning other attributes to the "Unspecified"
927 state.
930 DEFINING MACRO ATTRIBUTES
931 -------------------------
933 Custom macro attributes can be defined only in the `.gitattributes`
934 file at the toplevel (i.e. not in any subdirectory).  The built-in
935 macro attribute "binary" is equivalent to:
937 ------------
938 [attr]binary -diff -merge -text
939 ------------
942 EXAMPLE
943 -------
945 If you have these three `gitattributes` file:
947 ----------------------------------------------------------------
948 (in $GIT_DIR/info/attributes)
950 a*      foo !bar -baz
952 (in .gitattributes)
953 abc     foo bar baz
955 (in t/.gitattributes)
956 ab*     merge=filfre
957 abc     -foo -bar
958 *.c     frotz
959 ----------------------------------------------------------------
961 the attributes given to path `t/abc` are computed as follows:
963 1. By examining `t/.gitattributes` (which is in the same
964    directory as the path in question), Git finds that the first
965    line matches.  `merge` attribute is set.  It also finds that
966    the second line matches, and attributes `foo` and `bar`
967    are unset.
969 2. Then it examines `.gitattributes` (which is in the parent
970    directory), and finds that the first line matches, but
971    `t/.gitattributes` file already decided how `merge`, `foo`
972    and `bar` attributes should be given to this path, so it
973    leaves `foo` and `bar` unset.  Attribute `baz` is set.
975 3. Finally it examines `$GIT_DIR/info/attributes`.  This file
976    is used to override the in-tree settings.  The first line is
977    a match, and `foo` is set, `bar` is reverted to unspecified
978    state, and `baz` is unset.
980 As the result, the attributes assignment to `t/abc` becomes:
982 ----------------------------------------------------------------
983 foo     set to true
984 bar     unspecified
985 baz     set to false
986 merge   set to string value "filfre"
987 frotz   unspecified
988 ----------------------------------------------------------------
991 SEE ALSO
992 --------
993 linkgit:git-check-attr[1].
997 Part of the linkgit:git[1] suite