Merge git://github.com/git-l10n/git-po
[git.git] / Documentation / diff-config.txt
blobac770502553d9b4d3d1176f63ad01791736602a8
1 diff.autorefreshindex::
2         When using 'git diff' to compare with work tree
3         files, do not consider stat-only change as changed.
4         Instead, silently run `git update-index --refresh` to
5         update the cached stat information for paths whose
6         contents in the work tree match the contents in the
7         index.  This option defaults to true.  Note that this
8         affects only 'git diff' Porcelain, and not lower level
9         'diff' commands such as 'git diff-files'.
11 diff.dirstat::
12         A comma separated list of `--dirstat` parameters specifying the
13         default behavior of the `--dirstat` option to linkgit:git-diff[1]`
14         and friends. The defaults can be overridden on the command line
15         (using `--dirstat=<param1,param2,...>`). The fallback defaults
16         (when not changed by `diff.dirstat`) are `changes,noncumulative,3`.
17         The following parameters are available:
20 `changes`;;
21         Compute the dirstat numbers by counting the lines that have been
22         removed from the source, or added to the destination. This ignores
23         the amount of pure code movements within a file.  In other words,
24         rearranging lines in a file is not counted as much as other changes.
25         This is the default behavior when no parameter is given.
26 `lines`;;
27         Compute the dirstat numbers by doing the regular line-based diff
28         analysis, and summing the removed/added line counts. (For binary
29         files, count 64-byte chunks instead, since binary files have no
30         natural concept of lines). This is a more expensive `--dirstat`
31         behavior than the `changes` behavior, but it does count rearranged
32         lines within a file as much as other changes. The resulting output
33         is consistent with what you get from the other `--*stat` options.
34 `files`;;
35         Compute the dirstat numbers by counting the number of files changed.
36         Each changed file counts equally in the dirstat analysis. This is
37         the computationally cheapest `--dirstat` behavior, since it does
38         not have to look at the file contents at all.
39 `cumulative`;;
40         Count changes in a child directory for the parent directory as well.
41         Note that when using `cumulative`, the sum of the percentages
42         reported may exceed 100%. The default (non-cumulative) behavior can
43         be specified with the `noncumulative` parameter.
44 <limit>;;
45         An integer parameter specifies a cut-off percent (3% by default).
46         Directories contributing less than this percentage of the changes
47         are not shown in the output.
50 Example: The following will count changed files, while ignoring
51 directories with less than 10% of the total amount of changed files,
52 and accumulating child directory counts in the parent directories:
53 `files,10,cumulative`.
55 diff.statGraphWidth::
56         Limit the width of the graph part in --stat output. If set, applies
57         to all commands generating --stat output except format-patch.
59 diff.context::
60         Generate diffs with <n> lines of context instead of the default
61         of 3. This value is overridden by the -U option.
63 diff.external::
64         If this config variable is set, diff generation is not
65         performed using the internal diff machinery, but using the
66         given command.  Can be overridden with the `GIT_EXTERNAL_DIFF'
67         environment variable.  The command is called with parameters
68         as described under "git Diffs" in linkgit:git[1].  Note: if
69         you want to use an external diff program only on a subset of
70         your files, you might want to use linkgit:gitattributes[5] instead.
72 diff.ignoreSubmodules::
73         Sets the default value of --ignore-submodules. Note that this
74         affects only 'git diff' Porcelain, and not lower level 'diff'
75         commands such as 'git diff-files'. 'git checkout' also honors
76         this setting when reporting uncommitted changes.
78 diff.mnemonicprefix::
79         If set, 'git diff' uses a prefix pair that is different from the
80         standard "a/" and "b/" depending on what is being compared.  When
81         this configuration is in effect, reverse diff output also swaps
82         the order of the prefixes:
83 `git diff`;;
84         compares the (i)ndex and the (w)ork tree;
85 `git diff HEAD`;;
86          compares a (c)ommit and the (w)ork tree;
87 `git diff --cached`;;
88         compares a (c)ommit and the (i)ndex;
89 `git diff HEAD:file1 file2`;;
90         compares an (o)bject and a (w)ork tree entity;
91 `git diff --no-index a b`;;
92         compares two non-git things (1) and (2).
94 diff.noprefix::
95         If set, 'git diff' does not show any source or destination prefix.
97 diff.renameLimit::
98         The number of files to consider when performing the copy/rename
99         detection; equivalent to the 'git diff' option '-l'.
101 diff.renames::
102         Tells Git to detect renames.  If set to any boolean value, it
103         will enable basic rename detection.  If set to "copies" or
104         "copy", it will detect copies, as well.
106 diff.suppressBlankEmpty::
107         A boolean to inhibit the standard behavior of printing a space
108         before each empty output line. Defaults to false.
110 diff.submodule::
111         Specify the format in which differences in submodules are
112         shown.  The "log" format lists the commits in the range like
113         linkgit:git-submodule[1] `summary` does.  The "short" format
114         format just shows the names of the commits at the beginning
115         and end of the range.  Defaults to short.
117 diff.wordRegex::
118         A POSIX Extended Regular Expression used to determine what is a "word"
119         when performing word-by-word difference calculations.  Character
120         sequences that match the regular expression are "words", all other
121         characters are *ignorable* whitespace.
123 diff.<driver>.command::
124         The custom diff driver command.  See linkgit:gitattributes[5]
125         for details.
127 diff.<driver>.xfuncname::
128         The regular expression that the diff driver should use to
129         recognize the hunk header.  A built-in pattern may also be used.
130         See linkgit:gitattributes[5] for details.
132 diff.<driver>.binary::
133         Set this option to true to make the diff driver treat files as
134         binary.  See linkgit:gitattributes[5] for details.
136 diff.<driver>.textconv::
137         The command that the diff driver should call to generate the
138         text-converted version of a file.  The result of the
139         conversion is used to generate a human-readable diff.  See
140         linkgit:gitattributes[5] for details.
142 diff.<driver>.wordregex::
143         The regular expression that the diff driver should use to
144         split words in a line.  See linkgit:gitattributes[5] for
145         details.
147 diff.<driver>.cachetextconv::
148         Set this option to true to make the diff driver cache the text
149         conversion outputs.  See linkgit:gitattributes[5] for details.
151 diff.tool::
152         Controls which diff tool is used by linkgit:git-difftool[1].
153         This variable overrides the value configured in `merge.tool`.
154         The list below shows the valid built-in values.
155         Any other value is treated as a custom diff tool and requires
156         that a corresponding difftool.<tool>.cmd variable is defined.
158 include::mergetools-diff.txt[]
160 diff.algorithm::
161         Choose a diff algorithm.  The variants are as follows:
164 `default`, `myers`;;
165         The basic greedy diff algorithm. Currently, this is the default.
166 `minimal`;;
167         Spend extra time to make sure the smallest possible diff is
168         produced.
169 `patience`;;
170         Use "patience diff" algorithm when generating patches.
171 `histogram`;;
172         This algorithm extends the patience algorithm to "support
173         low-occurrence common elements".