From e960fc5c7d9144b1ce80dda9891ca7dfc656c078 Mon Sep 17 00:00:00 2001 From: "ravinandan.arakali@neterion.com" Date: Fri, 12 Aug 2005 10:15:59 -0700 Subject: [PATCH] [PATCH] S2io: Hardware fixes for Xframe II adapter Hi, Patch Description: This patch incorporates the following hardware fixes required for Xframe II adapter. 1. New values to program the dtx_control register. 2. Disable memory controller interrupts(MC_INTR) since these are now monitored thru' a poll routine. 3. Don't reset an XframeII card on an ECC double-bit error(It can recover). 4. Save/restore PCI config space before/after a reset irrespective of Xframe I or II card. 5. Bumped up the driver version no. to 2.0.3.1 Please review the patch and apply the same if it looks ok. Signed-off-by: Ravinandan Arakali Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e083351e3f4..7ca78228b10 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.2.1"; +static char s2io_driver_version[] = "Version 2.0.3.1"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -210,14 +210,18 @@ static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid) static u64 herc_act_dtx_cfg[] = { /* Set address */ - 0x80000515BA750000ULL, 0x80000515BA7500E0ULL, + 0x8000051536750000ULL, 0x80000515367500E0ULL, /* Write data */ - 0x80000515BA750004ULL, 0x80000515BA7500E4ULL, + 0x8000051536750004ULL, 0x80000515367500E4ULL, /* Set address */ 0x80010515003F0000ULL, 0x80010515003F00E0ULL, /* Write data */ 0x80010515003F0004ULL, 0x80010515003F00E4ULL, /* Set address */ + 0x801205150D440000ULL, 0x801205150D4400E0ULL, + /* Write data */ + 0x801205150D440004ULL, 0x801205150D4400E4ULL, + /* Set address */ 0x80020515F2100000ULL, 0x80020515F21000E0ULL, /* Write data */ 0x80020515F2100004ULL, 0x80020515F21000E4ULL, @@ -1903,7 +1907,7 @@ static int start_nic(struct s2io_nic *nic) } /* Enable select interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR; + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; interruptible |= TX_PIC_INTR | RX_PIC_INTR; interruptible |= TX_MAC_INTR | RX_MAC_INTR; @@ -2030,7 +2034,7 @@ static void stop_nic(struct s2io_nic *nic) config = &nic->config; /* Disable all interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR; + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; interruptible |= TX_PIC_INTR | RX_PIC_INTR; interruptible |= TX_MAC_INTR | RX_MAC_INTR; en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); @@ -2688,8 +2692,10 @@ static void alarm_intr_handler(struct s2io_nic *nic) DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name); DBG_PRINT(ERR_DBG, "double ECC error!!\n"); - netif_stop_queue(dev); - schedule_work(&nic->rst_timer_task); + if (nic->device_type != XFRAME_II_DEVICE) { + netif_stop_queue(dev); + schedule_work(&nic->rst_timer_task); + } } else { nic->mac_control.stats_info->sw_stat. single_ecc_errs++; @@ -2772,8 +2778,7 @@ void s2io_reset(nic_t * sp) u16 subid, pci_cmd; /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */ - if (sp->device_type == XFRAME_I_DEVICE) - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); + pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); val64 = SW_RESET_ALL; writeq(val64, &bar0->sw_reset); @@ -2792,14 +2797,10 @@ void s2io_reset(nic_t * sp) */ msleep(250); - if (!(sp->device_type & XFRAME_II_DEVICE)) { - /* Restore the PCI state saved during initializarion. */ - pci_restore_state(sp->pdev); - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, + /* Restore the PCI state saved during initialization. */ + pci_restore_state(sp->pdev); + pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd); - } else { - pci_set_master(sp->pdev); - } s2io_init_pci(sp); msleep(250); @@ -5426,9 +5427,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) INIT_WORK(&sp->set_link_task, (void (*)(void *)) s2io_set_link, sp); - if (!(sp->device_type & XFRAME_II_DEVICE)) { - pci_save_state(sp->pdev); - } + pci_save_state(sp->pdev); /* Setting swapper control on the NIC, for proper reset operation */ if (s2io_set_swapper(sp)) { -- 2.11.4.GIT