From 5e8d3241e46f9e7e4d66827a6fd31f227377bd54 Mon Sep 17 00:00:00 2001 From: jay Date: Fri, 29 Jul 2005 21:19:02 +0000 Subject: [PATCH] Updated auxilliary files from the automake-1.9 distribution --- INSTALL | 61 +++--- depcomp | 100 ++++++--- doc/texinfo.tex | 156 ++++++++++---- install-sh | 617 +++++++++++++++++++++++++++++--------------------------- missing | 139 +++++++------ mkinstalldirs | 71 +++++-- 6 files changed, 681 insertions(+), 463 deletions(-) rewrite install-sh (63%) diff --git a/INSTALL b/INSTALL index 54caf7c..56b077d 100644 --- a/INSTALL +++ b/INSTALL @@ -1,13 +1,16 @@ -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software -Foundation, Inc. +Installation Instructions +************************* - This file is free documentation; the Free Software Foundation gives +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free +Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== - These are generic installation instructions. +These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -67,9 +70,9 @@ The simplest way to compile this package is: Compilers and Options ===================== - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here @@ -82,7 +85,7 @@ is an example: Compiling For Multiple Architectures ==================================== - You can compile the package for more than one kind of computer at the +You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the @@ -99,19 +102,19 @@ for another architecture. Installation Names ================== - By default, `make install' will install the package's files in +By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. +option `--prefix=PREFIX'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. +give `configure' the option `--exec-prefix=PREFIX', the package will +use PREFIX as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular +options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. @@ -122,7 +125,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= - Some packages pay attention to `--enable-FEATURE' options to +Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -137,11 +140,11 @@ you can use the `configure' options `--x-includes=DIR' and Specifying the System Type ========================== - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -167,9 +170,9 @@ eventually be run) with `--host=TYPE'. Sharing Defaults ================ - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -178,7 +181,7 @@ A warning: not all `configure' scripts look for a site script. Defining Variables ================== - Variables not defined in a site shell script can be set in the +Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -186,14 +189,18 @@ them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc -will cause the specified gcc to be used as the C compiler (unless it is -overridden in the site shell script). +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). Here is a another example: + + /bin/bash ./configure CONFIG_SHELL=/bin/bash + +Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent +configuration-related scripts to be executed by `/bin/bash'. `configure' Invocation ====================== - `configure' recognizes the following options to control how it -operates. +`configure' recognizes the following options to control how it operates. `--help' `-h' diff --git a/depcomp b/depcomp index 53a5f2c..ffcd540 100755 --- a/depcomp +++ b/depcomp @@ -1,7 +1,9 @@ #! /bin/sh - # depcomp - compile a program generating dependencies as side-effects -# Copyright 1999, 2000, 2003 Free Software Foundation, Inc. + +scriptversion=2005-02-09.22 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -15,8 +17,8 @@ # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -25,22 +27,45 @@ # Originally written by Alexandre Oliva . +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi -# `libtool' can also be set to `yes' or `no'. - -if test -z "$depfile"; then - base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` - dir=`echo "$object" | sed 's,/.*$,/,'` - if test "$dir" = "$object"; then - dir= - fi - # FIXME: should be _deps on DOS. - depfile="$dir.deps/$base" -fi +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" @@ -262,27 +287,43 @@ tru64) base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then - tmpdepfile1="$dir.libs/$base.lo.d" - tmpdepfile2="$dir.libs/$base.d" + # With Tru64 cc, shared objects can also be used to make a + # static library. This mecanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else - tmpdepfile1="$dir$base.o.d" - tmpdepfile2="$dir$base.d" + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else - rm -f "$tmpdepfile1" "$tmpdepfile2" + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi - if test -f "$tmpdepfile1"; then - tmpdepfile="$tmpdepfile1" - else - tmpdepfile="$tmpdepfile2" - fi + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. @@ -477,3 +518,12 @@ none) esac exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/doc/texinfo.tex b/doc/texinfo.tex index a573d06..58bea4d 100644 --- a/doc/texinfo.tex +++ b/doc/texinfo.tex @@ -3,10 +3,10 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2004-09-06.16} +\def\texinfoversion{2005-01-30.17} % % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, -% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software % Foundation, Inc. % % This texinfo.tex file is free software; you can redistribute it and/or @@ -21,8 +21,8 @@ % % You should have received a copy of the GNU General Public License % along with this texinfo.tex file; see the file COPYING. If not, write -% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -% Boston, MA 02110-1301, USA. +% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +% Boston, MA 02111-1307, USA. % % As a special exception, when this file is read by TeX when processing % a Texinfo source document, you may use the result without @@ -89,10 +89,11 @@ \let\ptexhat=^ \let\ptexi=\i \let\ptexindent=\indent -\let\ptexnoindent=\noindent \let\ptexinsert=\insert \let\ptexlbrace=\{ \let\ptexless=< +\let\ptexnewwrite\newwrite +\let\ptexnoindent=\noindent \let\ptexplus=+ \let\ptexrbrace=\} \let\ptexslash=\/ @@ -1242,13 +1243,13 @@ where each line of input produces a line of output.} % Read toc silently, to get counts of subentries for \pdfoutline. \def\numchapentry##1##2##3##4{% \def\thischapnum{##2}% - \let\thissecnum\empty - \let\thissubsecnum\empty + \def\thissecnum{0}% + \def\thissubsecnum{0}% }% \def\numsecentry##1##2##3##4{% \advancenumber{chap\thischapnum}% \def\thissecnum{##2}% - \let\thissubsecnum\empty + \def\thissubsecnum{0}% }% \def\numsubsecentry##1##2##3##4{% \advancenumber{sec\thissecnum}% @@ -1257,9 +1258,9 @@ where each line of input produces a line of output.} \def\numsubsubsecentry##1##2##3##4{% \advancenumber{subsec\thissubsecnum}% }% - \let\thischapnum\empty - \let\thissecnum\empty - \let\thissubsecnum\empty + \def\thischapnum{0}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% % % use \def rather than \let here because we redefine \chapentry et % al. a second time, below. @@ -1406,7 +1407,7 @@ where each line of input produces a line of output.} \def\rm{\fam=0 \setfontstyle{rm}} \def\it{\fam=\itfam \setfontstyle{it}} \def\sl{\fam=\slfam \setfontstyle{sl}} -\def\bf{\fam=\bffam \setfontstyle{bf}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} \def\tt{\fam=\ttfam \setfontstyle{tt}} % Texinfo sort of supports the sans serif font style, which plain TeX does not. @@ -1468,17 +1469,10 @@ where each line of input produces a line of output.} \def\scbshape{csc} % Text fonts (11.2pt, magstep1). -\newcount\mainmagstep -\ifx\bigger\relax - % not really supported. - \mainmagstep=\magstep1 - \setfont\textrm\rmshape{12}{1000} - \setfont\texttt\ttshape{12}{1000} -\else - \mainmagstep=\magstephalf - \setfont\textrm\rmshape{10}{\mainmagstep} - \setfont\texttt\ttshape{10}{\mainmagstep} -\fi +\def\textnominalsize{11pt} +\edef\mainmagstep{\magstephalf} +\setfont\textrm\rmshape{10}{\mainmagstep} +\setfont\texttt\ttshape{10}{\mainmagstep} \setfont\textbf\bfshape{10}{\mainmagstep} \setfont\textit\itshape{10}{\mainmagstep} \setfont\textsl\slshape{10}{\mainmagstep} @@ -1495,6 +1489,7 @@ where each line of input produces a line of output.} \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} % Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} \setfont\smallrm\rmshape{9}{1000} \setfont\smalltt\ttshape{9}{1000} \setfont\smallbf\bfshape{10}{900} @@ -1507,6 +1502,7 @@ where each line of input produces a line of output.} \font\smallsy=cmsy9 % Fonts for small examples (8pt). +\def\smallernominalsize{8pt} \setfont\smallerrm\rmshape{8}{1000} \setfont\smallertt\ttshape{8}{1000} \setfont\smallerbf\bfshape{10}{800} @@ -1519,6 +1515,7 @@ where each line of input produces a line of output.} \font\smallersy=cmsy8 % Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} \setfont\titlerm\rmbshape{12}{\magstep3} \setfont\titleit\itbshape{10}{\magstep4} \setfont\titlesl\slbshape{10}{\magstep4} @@ -1533,6 +1530,7 @@ where each line of input produces a line of output.} \def\authortt{\sectt} % Chapter (and unnumbered) fonts (17.28pt). +\def\chapnominalsize{17pt} \setfont\chaprm\rmbshape{12}{\magstep2} \setfont\chapit\itbshape{10}{\magstep3} \setfont\chapsl\slbshape{10}{\magstep3} @@ -1545,6 +1543,7 @@ where each line of input produces a line of output.} \font\chapsy=cmsy10 scaled \magstep3 % Section fonts (14.4pt). +\def\secnominalsize{14pt} \setfont\secrm\rmbshape{12}{\magstep1} \setfont\secit\itbshape{10}{\magstep2} \setfont\secsl\slbshape{10}{\magstep2} @@ -1557,6 +1556,7 @@ where each line of input produces a line of output.} \font\secsy=cmsy10 scaled \magstep2 % Subsection fonts (13.15pt). +\def\ssecnominalsize{13pt} \setfont\ssecrm\rmbshape{12}{\magstephalf} \setfont\ssecit\itbshape{10}{1315} \setfont\ssecsl\slbshape{10}{1315} @@ -1569,6 +1569,7 @@ where each line of input produces a line of output.} \font\ssecsy=cmsy10 scaled 1315 % Reduced fonts for @acro in text (10pt). +\def\reducednominalsize{10pt} \setfont\reducedrm\rmshape{10}{1000} \setfont\reducedtt\ttshape{10}{1000} \setfont\reducedbf\bfshape{10}{1000} @@ -1608,6 +1609,7 @@ where each line of input produces a line of output.} \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl + \def\curfontsize{text}% \def\lsize{reduced}\def\lllsize{smaller}% \resetmathfonts \setleading{\textleading}} \def\titlefonts{% @@ -1615,13 +1617,16 @@ where each line of input produces a line of output.} \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy \let\tenttsl=\titlettsl + \def\curfontsize{title}% \def\lsize{chap}\def\lllsize{subsec}% \resetmathfonts \setleading{25pt}} \def\titlefont#1{{\titlefonts\rm #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \let\tenttsl=\chapttsl + \def\curfontsize{chap}% \def\lsize{sec}\def\lllsize{text}% \resetmathfonts \setleading{19pt}} \def\secfonts{% @@ -1629,6 +1634,7 @@ where each line of input produces a line of output.} \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl + \def\curfontsize{sec}% \def\lsize{subsec}\def\lllsize{reduced}% \resetmathfonts \setleading{16pt}} \def\subsecfonts{% @@ -1636,6 +1642,7 @@ where each line of input produces a line of output.} \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl + \def\curfontsize{ssec}% \def\lsize{text}\def\lllsize{small}% \resetmathfonts \setleading{15pt}} \let\subsubsecfonts = \subsecfonts @@ -1644,6 +1651,7 @@ where each line of input produces a line of output.} \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy \let\tenttsl=\reducedttsl + \def\curfontsize{reduced}% \def\lsize{small}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallfonts{% @@ -1651,6 +1659,7 @@ where each line of input produces a line of output.} \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy \let\tenttsl=\smallttsl + \def\curfontsize{small}% \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallerfonts{% @@ -1658,6 +1667,7 @@ where each line of input produces a line of output.} \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy \let\tenttsl=\smallerttsl + \def\curfontsize{smaller}% \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{9.5pt}} @@ -1720,9 +1730,13 @@ where each line of input produces a line of output.} \let\dfn=\smartslanted \let\emph=\smartitalic +% @b, explicit bold. \def\b#1{{\bf #1}} \let\strong=\b +% @sansserif, explicit sans. +\def\sansserif#1{{\sf #1}} + % We can't just use \exhyphenpenalty, because that only has effect at % the end of a paragraph. Restore normal hyphenation at the end of the % group within which \nohyphenation is presumably called. @@ -1959,6 +1973,54 @@ where each line of input produces a line of output.} % \def\pounds{{\it\$}} +% @euro{} comes from a separate font, depending on the current style. +% We use the free feym* fonts from the eurosym package by Henrik +% Theiling, which support regular, slanted, bold and bold slanted (and +% "outlined" (blackboard board, sort of) versions, which we don't need). +% It is available from http://www.ctan.org/tex-archive/fonts/eurosym. +% +% Although only regular is the truly official Euro symbol, we ignore +% that. The Euro is designed to be slightly taller than the regular +% font height. +% +% feymr - regular +% feymo - slanted +% feybr - bold +% feybo - bold slanted +% +% There is no good (free) typewriter version, to my knowledge. +% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. +% Hmm. +% +% Also doesn't work in math. Do we need to do math with euro symbols? +% Hope not. +% +% +\def\euro{{\eurofont e}} +\def\eurofont{% + % We set the font at each command, rather than predefining it in + % \textfonts and the other font-switching commands, so that + % installations which never need the symbol don't have to have the + % font installed. + % + % There is only one designed size (nominal 10pt), so we always scale + % that to the current nominal size. + % + % By the way, simply using "at 1em" works for cmr10 and the like, but + % does not work for cmbx10 and other extended/shrunken fonts. + % + \def\eurosize{\csname\curfontsize nominalsize\endcsname}% + % + \ifx\curfontstyle\bfstylename + % bold: + \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize + \else + % regular: + \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize + \fi + \thiseurofont +} + % @registeredsymbol - R in a circle. The font for the R should really % be smaller yet, but lllsize is the best we can do for now. % Adapted from the plain.tex definition of \copyright. @@ -2314,15 +2376,26 @@ where each line of input produces a line of output.} % @table, @ftable, @vtable. \envdef\table{% \let\itemindex\gobble - \tablex + \tablecheck{table}% } \envdef\ftable{% \def\itemindex ##1{\doind {fn}{\code{##1}}}% - \tablex + \tablecheck{ftable}% } \envdef\vtable{% \def\itemindex ##1{\doind {vr}{\code{##1}}}% - \tablex + \tablecheck{vtable}% +} +\def\tablecheck#1{% + \ifnum \the\catcode`\^^M=\active + \endgroup + \errmessage{This command won't work in this context; perhaps the problem is + that we are \inenvironment\thisenv}% + \def\next{\doignore{#1}}% + \else + \let\next\tablex + \fi + \next } \def\tablex#1{% \def\itemindicate{#1}% @@ -2721,19 +2794,17 @@ where each line of input produces a line of output.} \global\setpercentfalse } -\def\setmultitablespacing{% test to see if user has set \multitablelinespace. -% If so, do nothing. If not, give it an appropriate dimension based on -% current baselineskip. +\def\setmultitablespacing{% + \def\multistrut{\strut}% just use the standard line spacing + % + % Compute \multitablelinespace (if not defined by user) for use in + % \multitableparskip calculation. We used define \multistrut based on + % this, but (ironically) that caused the spacing to be off. + % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. \ifdim\multitablelinespace=0pt \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 -%% strut to put in table in case some entry doesn't have descenders, -%% to keep lines equally spaced -\let\multistrut = \strut -\else -%% FIXME: what is \box0 supposed to be? -\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 -width0pt\relax} \fi +\fi %% Test to see if parskip is larger than space between lines of %% table. If not, do nothing. %% If so, set to same dimension as multitablelinespace. @@ -2963,9 +3034,8 @@ width0pt\relax} \fi % Index generation facilities % Define \newwrite to be identical to plain tex's \newwrite -% except not \outer, so it can be used within \newindex. -{\catcode`\@=11 -\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} +% except not \outer, so it can be used within macros and \if's. +\edef\newwrite{\makecsname{ptexnewwrite}} % \newindex {foo} defines an index named foo. % It automatically defines \fooindex such that @@ -3157,6 +3227,7 @@ width0pt\relax} \fi \definedummyword{enddots}% \definedummyword{equiv}% \definedummyword{error}% + \definedummyword{euro}% \definedummyword{expansion}% \definedummyword{minus}% \definedummyword{pounds}% @@ -3295,6 +3366,7 @@ width0pt\relax} \fi \def\enddots{...}% \def\equiv{==}% \def\error{error}% + \def\euro{euro}% \def\expansion{==>}% \def\minus{-}% \def\pounds{pounds}% @@ -4217,11 +4289,11 @@ width0pt\relax} \fi \ifx\temptype\Ynothingkeyword \setbox0 = \hbox{}% \def\toctype{unnchap}% - \def\thischapter{#1}% + \gdef\thischapter{#1}% \else\ifx\temptype\Yomitfromtockeyword \setbox0 = \hbox{}% contents like unnumbered, but no toc entry \def\toctype{omit}% - \xdef\thischapter{}% + \gdef\thischapter{}% \else\ifx\temptype\Yappendixkeyword \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% \def\toctype{app}% diff --git a/install-sh b/install-sh dissimilarity index 63% index 6ce63b9..1a83534 100755 --- a/install-sh +++ b/install-sh @@ -1,294 +1,323 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd=$cpprog - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "$0: no input file specified" >&2 - exit 1 -else - : -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d "$dst" ]; then - instcmd=: - chmodcmd="" - else - instcmd=$mkdirprog - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f "$src" ] || [ -d "$src" ] - then - : - else - echo "$0: $src does not exist" >&2 - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "$0: no destination specified" >&2 - exit 1 - else - : - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d "$dst" ] - then - dst=$dst/`basename "$src"` - else - : - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' - ' -IFS="${IFS-$defaultIFS}" - -oIFS=$IFS -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS=$oIFS - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp=$pathcomp$1 - shift - - if [ ! -d "$pathcomp" ] ; - then - $mkdirprog "$pathcomp" - else - : - fi - - pathcomp=$pathcomp/ -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd "$dst" && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename "$dst"` - else - dstfile=`basename "$dst" $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename "$dst"` - else - : - fi - -# Make a couple of temp file names in the proper directory. - - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - -# Trap to clean up temp files at exit. - - trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 - trap '(exit $?); exit' 1 2 13 15 - -# Move or copy the file name to the temp name - - $doit $instcmd "$src" "$dsttmp" && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && - -# Now remove or move aside any old file at destination location. We try this -# two ways since rm can't unlink itself on some systems and the destination -# file might be busy for other reasons. In this case, the final cleanup -# might fail but the new file should still install successfully. - -{ - if [ -f "$dstdir/$dstfile" ] - then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || - $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || - { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit - } - else - : - fi -} && - -# Now rename the file to the real destination. - - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - -fi && - -# The final little trick to "correctly" pass the exit status to the exit trap. - -{ - (exit 0); exit -} +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2005-02-02.21 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +chmodcmd="$chmodprog 0755" +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac +done + +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi + fi + + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + shift + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit 1; } +done + +# The final little trick to "correctly" pass the exit status to the exit trap. +{ + (exit 0); exit 0 +} + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/missing b/missing index c58bec0..09edd88 100755 --- a/missing +++ b/missing @@ -1,6 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc. + +scriptversion=2005-02-08.22 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify @@ -15,8 +19,8 @@ # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -38,18 +42,24 @@ else configure_ac=configure.in fi +msg="missing on your system" + case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in -h|--h|--he|--hel|--help) echo "\ @@ -74,11 +84,15 @@ Supported PROGRAM values: lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to ." + exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing 0.4 - GNU automake" + echo "missing $scriptversion (GNU Automake)" + exit $? ;; -*) @@ -87,14 +101,44 @@ Supported PROGRAM values: exit 1 ;; - aclocal*) +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 fi + ;; +esac +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + aclocal*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." @@ -102,13 +146,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; autoconf) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." @@ -116,13 +155,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; autoheader) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." @@ -140,13 +174,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; automake*) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." @@ -156,14 +185,9 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; autom4te) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." @@ -185,7 +209,7 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your bison|yacc) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." @@ -215,7 +239,7 @@ WARNING: \`$1' is missing on your system. You should only need it if lex|flex) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." @@ -237,13 +261,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; help2man) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." @@ -262,32 +281,27 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; makeinfo) - if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then - # We have makeinfo, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi touch $file ;; tar) shift - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error @@ -323,8 +337,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments. *) echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case @@ -334,3 +348,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your esac exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/mkinstalldirs b/mkinstalldirs index d2d5f21..5d26a48 100755 --- a/mkinstalldirs +++ b/mkinstalldirs @@ -1,21 +1,33 @@ #! /bin/sh # mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman + +scriptversion=2005-02-02.21 + +# Original author: Noah Friedman # Created: 1993-05-16 -# Public domain +# Public domain. +# +# This file is maintained in Automake, please report +# bugs to or send patches to +# . errstatus=0 dirmode="" usage="\ -Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." +Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... + +Create each directory DIR (with mode MODE, if specified), including all +leading file name components. + +Report bugs to ." # process command line arguments while test $# -gt 0 ; do case $1 in -h | --help | --h*) # -h for help - echo "$usage" 1>&2 - exit 0 + echo "$usage" + exit $? ;; -m) # -m PERM arg shift @@ -23,6 +35,10 @@ while test $# -gt 0 ; do dirmode=$1 shift ;; + --version) + echo "$0 $scriptversion" + exit $? + ;; --) # stop option processing shift break @@ -50,17 +66,37 @@ case $# in 0) exit 0 ;; esac +# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and +# mkdir -p a/c at the same time, both will detect that a is missing, +# one will create a, then the other will try to create a and die with +# a "File exists" error. This is a problem when calling mkinstalldirs +# from a parallel make. We use --version in the probe to restrict +# ourselves to GNU mkdir, which is thread-safe. case $dirmode in '') - if mkdir -p -- . 2>/dev/null; then + if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then echo "mkdir -p -- $*" exec mkdir -p -- "$@" + else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + test -d ./-p && rmdir ./-p + test -d ./--version && rmdir ./--version fi ;; *) - if mkdir -m "$dirmode" -p -- . 2>/dev/null; then + if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && + test ! -d ./--version; then echo "mkdir -m $dirmode -p -- $*" exec mkdir -m "$dirmode" -p -- "$@" + else + # Clean up after NextStep and OpenStep mkdir. + for d in ./-m ./-p ./--version "./$dirmode"; + do + test -d $d && rmdir $d + done fi ;; esac @@ -84,17 +120,17 @@ do mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then - errstatus=$lasterr + errstatus=$lasterr else - if test ! -z "$dirmode"; then + if test ! -z "$dirmode"; then echo "chmod $dirmode $pathcomp" - lasterr="" - chmod "$dirmode" "$pathcomp" || lasterr=$? + lasterr="" + chmod "$dirmode" "$pathcomp" || lasterr=$? - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi fi fi @@ -107,5 +143,8 @@ exit $errstatus # Local Variables: # mode: shell-script # sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" # End: -# mkinstalldirs ends here -- 2.11.4.GIT