From a76fe70551ace5d8865f191c1e71e6c7d55c695e Mon Sep 17 00:00:00 2001 From: "Shawn O. Pearce" Date: Fri, 17 Jul 2009 12:15:39 -0700 Subject: [PATCH] Change SUBMITTING_PATCHES to point to Eclipse Due Diligence Process It is required that all changes come through that process, which is quite lengthy and not suitable for inclusion here. Instead we point to the process and add only our project specific rules related to style formatting and change management. Signed-off-by: Shawn O. Pearce --- SUBMITTING_PATCHES | 469 ++++++++++++----------------------------------------- 1 file changed, 103 insertions(+), 366 deletions(-) rewrite SUBMITTING_PATCHES (80%) diff --git a/SUBMITTING_PATCHES b/SUBMITTING_PATCHES dissimilarity index 80% index 922166e6..5d08c182 100644 --- a/SUBMITTING_PATCHES +++ b/SUBMITTING_PATCHES @@ -1,366 +1,103 @@ -Short Version: - - - Make small logical changes. - - Provide a meaningful commit message. - - - Include your Signed-Off-By line to note you agree with the - Developer's Certificate of Origin (see below). - - Make sure all code is under the proper license: - - Eclipse Public License (EPL) - - - Use a subject prefix of "[PATCH EGIT ...]" when sending any - patches directly by email. - - - Send by email to the maintainers, cc'ing the git mailing list - which is currently used for both Git, EGit: - - maintainers : "Shawn O. Pearce" - Robin Rosenberg - - dev list : egit-dev@eclipse.org - - list info : http://dev.eclipse.org/mhonarc/lists/egit-dev/maillist.html - -Long Version: - -I wanted a file describing how to submit patches for EGit, -so I started with the one found in the core Git distribution -(Documentation/SubmittingPatches), which itself was based on the -patch submission guidelines for the Linux kernel. - -However there are some differences, so please review and familiarize -yourself with the following relevant bits: - - -(1) Make separate commits for logically separate changes. - -Unless your patch is really trivial, you should not be sending -out a patch that was generated between your working tree and your -commit head. Instead, always make a commit with complete commit -message and generate a series of patches from your repository. -It is a good discipline. - -Describe the technical detail of the change(s). - -If your description starts to get too long, that's a sign that you -probably need to split up your commit to finer grained pieces. - -I am very picky about formatting. Make sure your final version -of every file was formatted using the Eclipse code formatter -using the project specific settings (Properties->Java Code -Style->Formatter->"Java Conventions [built-in]"). - - -(2) Generate your patch using git tools out of your commits. - -git based diff tools (git, and StGIT included) generate unidiff, -which is the only acceptable format. - -You do not have to be afraid to use -M option to "git diff" or "git -format-patch", if your patch involves file renames. The receiving -end can handle them just fine. - -Please make sure your patch does not include any extra files which -do not belong in a patch submission. Make sure to review your -patch after generating it, to ensure accuracy. Before sending out, -please make sure it cleanly applies to the "master" branch head. - - -(3) Sending your patches. - -People on the git mailing list need to be able to read and comment -on the changes you are submitting. It is important for a developer -to be able to "quote" your changes, using standard e-mail tools, so -that they may comment on specific portions of your code. For this -reason, all patches should be submitted "inline". WARNING: Be wary -of your MUAs word-wrap corrupting your patch. Do not cut-n-paste -your patch; you can lose tabs that way if you are not careful. - -It is a common convention to prefix your subject line with [PATCH]. -This lets people easily distinguish patches from other e-mail -discussions. - -"git format-patch" command follows the best current practice to -format the body of an e-mail message. At the beginning of the patch -should come your commit message, ending with the Signed-off-by: -lines, and a line that consists of three dashes, followed by the -diffstat information and the patch itself. If you are forwarding a -patch from somebody else, optionally, at the beginning of the e-mail -message just before the commit message starts, you can put a "From: -" line to name that person. - -You often want to add additional explanation about the patch, -other than the commit message itself. Place such "cover letter" -material between the three dash lines and the diffstat. - -Do not attach the patch as a MIME attachment, compressed or not. -Do not let your e-mail client send quoted-printable. Do not let your -e-mail client send format=flowed which would destroy whitespaces -in your patches. Many popular e-mail applications will not always -transmit a MIME attachment as plain text, making it impossible to -comment on your code. A MIME attachment also takes a bit more -time to process. This does not decrease the likelihood of your -MIME-attached change being accepted, but it makes it more likely -that it will be postponed. - -Exception: If your mailer is mangling patches then someone may ask -you to re-send them using MIME, that is OK. - -Do not PGP sign your patch, at least for now. Most likely, your -maintainer or other people on the list would not have your PGP -key and would not bother obtaining it anyway. Your patch is not -judged by who you are; a good patch from an unknown origin has a -far better chance of being accepted than a patch from a known, -respected origin that is done poorly or does incorrect things. - -If you really really really really want to do a PGP signed -patch, format it as "multipart/signed", not a text/plain message -that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is -not a text/plain, it's something else. - -Note that your maintainer does not necessarily read everything -on the git mailing list. If your patch is for discussion first, -send it "To:" the mailing list, and optionally "cc:" him. If it -is trivially correct or after the list reached a consensus, send it -"To:" the maintainer and optionally "cc:" the list. - - -(4) Check the license - -EGit is licensed under the Eclipse Public License (EPL). - -Under this licensing model *every* file within the project -*must* list which license covers it in the header of the file. -Any new contributions to an existing file *must* be submitted under -the current license of that file. Any new files *must* clearly -indicate which license they are provided under in the file header. - -Please verify that you are legally allowed and willing to submit your -changes under the license covering each file *prior* to submitting -your patch. It is virtually impossible to remove a patch once it -has been applied and pushed out. - - -(5) Sign your work - -To improve tracking of who did what, we've borrowed the "sign-off" -procedure from the Linux kernel project on patches that are being -emailed around. Although EGit is a lot smaller project it is -a good discipline to follow it. - -The sign-off is a simple line at the end of the explanation for the -patch, which certifies that you wrote it or otherwise have the right -to pass it on as a open-source patch. The rules are pretty simple: -if you can certify the below: - - Developer's Certificate of Origin 1.1 - - By making a contribution to this project, I certify that: - - (a) The contribution was created in whole or in part by me - and I have the right to submit it under the open source - license indicated in the file; or - - (b) The contribution is based upon previous work that, to the - best of my knowledge, is covered under an appropriate - open source license and I have the right under that - license to submit that work with modifications, whether - created in whole or in part by me, under the same open - source license (unless I am permitted to submit under - a different license), as indicated in the file; or - - (c) The contribution was provided directly to me by some - other person who certified (a), (b) or (c) and I have - not modified it. - - (d) I understand and agree that this project and the - contribution are public and that a record of the - contribution (including all personal information I - submit with it, including my sign-off) is maintained - indefinitely and may be redistributed consistent with - this project or the open source license(s) involved. - -then you just add a line saying - - Signed-off-by: Random J Developer - -This line can be automatically added by git if you run the git-commit -command with the -s option. - -Some people also put extra tags at the end. They'll just be ignored -for now, but you can do this to mark internal company procedures -or just point out some special detail about the sign-off. - - ------------------------------------------------- -MUA specific hints - -Some of patches I receive or pick up from the list share common -patterns of breakage. Please make sure your MUA is set up -properly not to corrupt whitespaces. Here are two common ones -I have seen: - -* Empty context lines that do not have _any_ whitespace. - -* Non empty context lines that have one extra whitespace at the - beginning. - -One test you could do yourself if your MUA is set up correctly is: - -* Send the patch to yourself, exactly the way you would, except - To: and Cc: lines, which would not contain the list and - maintainer address. - -* Save that patch to a file in UNIX mailbox format. Call it say - a.patch. - -* Try to apply to the tip of the "master" branch from the - egit.git public repository: - - $ git fetch git://repo.or.cz/egit.git master:test-apply - $ git checkout test-apply - $ git reset --hard - $ git am a.patch - -If it does not apply correctly, there can be various reasons. - -* Your patch itself does not apply cleanly. That is _bad_ but - does not have much to do with your MUA. Please rebase the - patch appropriately. - -* Your MUA corrupted your patch; applymbox would complain that - the patch does not apply. Look at .dotest/ subdirectory and - see what 'patch' file contains and check for the common - corruption patterns mentioned above. - -* While you are at it, check what are in 'info' and - 'final-commit' files as well. If what is in 'final-commit' is - not exactly what you would want to see in the commit log - message, it is very likely that your maintainer would end up - hand editing the log message when he applies your patch. - Things like "Hi, this is my first patch.\n", if you really - want to put in the patch e-mail, should come after the - three-dash line that signals the end of the commit message. - - -Pine ----- - -(Johannes Schindelin) - -I don't know how many people still use pine, but for those poor -souls it may be good to mention that the quell-flowed-text is -needed for recent versions. - -... the "no-strip-whitespace-before-send" option, too. AFAIK it -was introduced in 4.60. - -(Linus Torvalds) - -And 4.58 needs at least this. - ---- -diff-tree 8326dd8350be64ac7fc805f6563a1d61ad10d32c (from e886a61f76edf5410573e92e38ce22974f9c40f1) -Author: Linus Torvalds -Date: Mon Aug 15 17:23:51 2005 -0700 - - Fix pine whitespace-corruption bug - - There's no excuse for unconditionally removing whitespace from - the pico buffers on close. - -diff --git a/pico/pico.c b/pico/pico.c ---- a/pico/pico.c -+++ b/pico/pico.c -@@ -219,7 +219,9 @@ PICO *pm; - switch(pico_all_done){ /* prepare for/handle final events */ - case COMP_EXIT : /* already confirmed */ - packheader(); -+#if 0 - stripwhitespace(); -+#endif - c |= COMP_EXIT; - break; - - -(Daniel Barkalow) - -> A patch to SubmittingPatches, MUA specific help section for -> users of Pine 4.63 would be very much appreciated. - -Ah, it looks like a recent version changed the default behavior to do the -right thing, and inverted the sense of the configuration option. (Either -that or Gentoo did it.) So you need to set the -"no-strip-whitespace-before-send" option, unless the option you have is -"strip-whitespace-before-send", in which case you should avoid checking -it. - - -Thunderbird ------------ - -(A Large Angry SCM) - -Here are some hints on how to successfully submit patches inline using -Thunderbird. - -This recipe appears to work with the current [*1*] Thunderbird from Suse. - -The following Thunderbird extensions are needed: - AboutConfig 0.5 - http://aboutconfig.mozdev.org/ - External Editor 0.7.2 - http://globs.org/articles.php?lng=en&pg=8 - -1) Prepare the patch as a text file using your method of choice. - -2) Before opening a compose window, use Edit->Account Settings to -uncheck the "Compose messages in HTML format" setting in the -"Composition & Addressing" panel of the account to be used to send the -patch. [*2*] - -3) In the main Thunderbird window, _before_ you open the compose window -for the patch, use Tools->about:config to set the following to the -indicated values: - mailnews.send_plaintext_flowed => false - mailnews.wraplength => 0 - -4) Open a compose window and click the external editor icon. - -5) In the external editor window, read in the patch file and exit the -editor normally. - -6) Back in the compose window: Add whatever other text you wish to the -message, complete the addressing and subject fields, and press send. - -7) Optionally, undo the about:config/account settings changes made in -steps 2 & 3. - - -[Footnotes] -*1* Version 1.0 (20041207) from the MozillaThunderbird-1.0-5 rpm of Suse -9.3 professional updates. - -*2* It may be possible to do this with about:config and the following -settings but I haven't tried, yet. - mail.html_compose => false - mail.identity.default.compose_html => false - mail.identity.id?.compose_html => false - - - -Gnus ----- - -'|' in the *Summary* buffer can be used to pipe the current -message to an external program, and this is a handy way to drive -"git am". However, if the message is MIME encoded, what is -piped into the program is the representation you see in your -*Article* buffer after unwrapping MIME. This is often not what -you would want for two reasons. It tends to screw up non ASCII -characters (most notably in people's names), and also -whitespaces (fatal in patches). Running 'C-u g' to display the -message in raw form before using '|' to run the pipe can work -this problem around. - +Short Version: + + - Make small logical changes. + - Provide a meaningful commit message. + + - Review and follow the Eclipse Due Diligence Process + + http://www.eclipse.org/legal/EclipseLegalProcessPoster.pdf + + - Submit patch as an attachment to eclipse.org via bugzilla: + + https://bugs.eclipse.org/bugs/enter_bug.cgi?product=EGit + + +Long Version: + +I wanted a file describing how to submit patches for EGit, +so I started with the one found in the core Git distribution +(Documentation/SubmittingPatches), which itself was based on the +patch submission guidelines for the Linux kernel. + +However there are quite a few differences, so please review and +familiarize yourself with the following relevant bits: + + +(1) Make separate commits for logically separate changes. + +Unless your patch is really trivial, you should not be sending +out a patch that was generated between your working tree and your +commit head. Instead, always make a commit with complete commit +message and generate a series of patches from your repository. +It is a good discipline. + +Describe the technical detail of the change(s). + +If your description starts to get too long, that's a sign that you +probably need to split up your commit to finer grained pieces. + +I am very picky about formatting. Make sure your final version +of every file was formatted using the Eclipse code formatter +using the project specific settings (Properties->Java Code +Style->Formatter->"Java Conventions [built-in]"). + + +(2) Generate your patch using git tools out of your commits. + +git based diff tools (git, and StGIT included) generate unidiff, +which is the only acceptable format. + +You do not have to be afraid to use -M option to "git diff" or "git +format-patch", if your patch involves file renames. The receiving +end can handle them just fine. + +Please make sure your patch does not include any extra files which +do not belong in a patch submission. Make sure to review your +patch after generating it, to ensure accuracy. Before sending out, +please make sure it cleanly applies to the "master" branch head. + + +(3) Check the license. + +EGit is licensed under the Eclipse Public License (EPL). + +Under this licensing model *every* file within the project +*must* list which license covers it in the header of the file. +Any new contributions to an existing file *must* be submitted under +the current license of that file. Any new files *must* clearly +indicate which license they are provided under in the file header. + +Please verify that you are legally allowed and willing to submit your +changes under the license covering each file *prior* to submitting +your patch. It is virtually impossible to remove a patch once it +has been applied and pushed out. + + +(4) Review the Eclipse Due Diligence Process. + + http://www.eclipse.org/legal/EclipseLegalProcessPoster.pdf + + +(5) Sending your patches. + +"git format-patch" command follows the best current practice to +format a commit as a reviewable text message. + +At the beginning of the patch should come your commit message, +a line that consists of three dashes, followed by the diffstat +information and the patch itself. If you are forwarding a patch +from somebody else, optionally, at the beginning of the e-mail +message just before the commit message starts, you can put a "From: +" line to name that person. + +You often want to add additional explanation about the patch, +other than the commit message itself. Place such "cover letter" +material between the three dash lines and the diffstat, or please +place it in the bug description itself. + +Open a new bug on the Eclipse bug tracker on the EGit project: + + https://bugs.eclipse.org/bugs/enter_bug.cgi?product=EGit + +Attach the mailbox file(s) created by "git format-patch" to the bug. + -- 2.11.4.GIT