Including errno.h and still declaring errno is BROKEN.
[dragonfly/netmp.git] / sys / netinet6 / udp6_output.c
blobaa7b35855ffdebf5ef26acb88ff0a237cce13fe9
1 /* $FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $ */
2 /* $DragonFly: src/sys/netinet6/udp6_output.c,v 1.6 2004/06/02 14:43:01 eirikn Exp $ */
3 /* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $ */
5 /*
6 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
7 * All rights reserved.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the project nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
35 * Copyright (c) 1982, 1986, 1989, 1993
36 * The Regents of the University of California. All rights reserved.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
40 * are met:
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
46 * 3. All advertising materials mentioning features or use of this software
47 * must display the following acknowledgement:
48 * This product includes software developed by the University of
49 * California, Berkeley and its contributors.
50 * 4. Neither the name of the University nor the names of its contributors
51 * may be used to endorse or promote products derived from this software
52 * without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
64 * SUCH DAMAGE.
66 * @(#)udp_var.h 8.1 (Berkeley) 6/10/93
69 #include "opt_ipsec.h"
70 #include "opt_inet.h"
71 #include "opt_inet6.h"
73 #include <sys/param.h>
74 #include <sys/malloc.h>
75 #include <sys/mbuf.h>
76 #include <sys/protosw.h>
77 #include <sys/socket.h>
78 #include <sys/socketvar.h>
79 #include <sys/sysctl.h>
80 #include <sys/errno.h>
81 #include <sys/stat.h>
82 #include <sys/systm.h>
83 #include <sys/proc.h>
84 #include <sys/syslog.h>
86 #include <net/if.h>
87 #include <net/route.h>
88 #include <net/if_types.h>
90 #include <netinet/in.h>
91 #include <netinet/in_var.h>
92 #include <netinet/in_systm.h>
93 #include <netinet/ip.h>
94 #include <netinet/ip_var.h>
95 #include <netinet/in_pcb.h>
96 #include <netinet/udp.h>
97 #include <netinet/udp_var.h>
98 #include <netinet/ip6.h>
99 #include <netinet6/ip6_var.h>
100 #include <netinet6/in6_pcb.h>
101 #include <netinet6/udp6_var.h>
102 #include <netinet/icmp6.h>
103 #include <netinet6/ip6protosw.h>
105 #ifdef IPSEC
106 #include <netinet6/ipsec.h>
107 #ifdef INET6
108 #include <netinet6/ipsec6.h>
109 #endif
110 #endif /* IPSEC */
112 #include <net/net_osdep.h>
115 * UDP protocol inplementation.
116 * Per RFC 768, August, 1980.
119 #define in6pcb inpcb
120 #define udp6stat udpstat
121 #define udp6s_opackets udps_opackets
124 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
125 struct mbuf *control, struct thread *td)
127 u_int32_t ulen = m->m_pkthdr.len;
128 u_int32_t plen = sizeof(struct udphdr) + ulen;
129 struct ip6_hdr *ip6;
130 struct udphdr *udp6;
131 struct in6_addr *laddr, *faddr;
132 u_short fport;
133 int error = 0;
134 struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
135 int priv;
136 int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
137 int flags;
138 struct sockaddr_in6 tmp;
140 priv = !suser(td); /* 1 if privilaged, 0 if not */
141 if (control) {
142 if ((error = ip6_setpktoptions(control, &opt, priv, 0)) != 0)
143 goto release;
144 in6p->in6p_outputopts = &opt;
147 if (addr6) {
149 * IPv4 version of udp_output calls in_pcbconnect in this case,
150 * which needs splnet and affects performance.
151 * Since we saw no essential reason for calling in_pcbconnect,
152 * we get rid of such kind of logic, and call in6_selectsrc
153 * and in6_pcbsetport in order to fill in the local address
154 * and the local port.
156 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
157 if (sin6->sin6_port == 0) {
158 error = EADDRNOTAVAIL;
159 goto release;
162 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
163 /* how about ::ffff:0.0.0.0 case? */
164 error = EISCONN;
165 goto release;
168 /* protect *sin6 from overwrites */
169 tmp = *sin6;
170 sin6 = &tmp;
172 faddr = &sin6->sin6_addr;
173 fport = sin6->sin6_port; /* allow 0 port */
175 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
176 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
178 * I believe we should explicitly discard the
179 * packet when mapped addresses are disabled,
180 * rather than send the packet as an IPv6 one.
181 * If we chose the latter approach, the packet
182 * might be sent out on the wire based on the
183 * default route, the situation which we'd
184 * probably want to avoid.
185 * (20010421 jinmei@kame.net)
187 error = EINVAL;
188 goto release;
189 } else
190 af = AF_INET;
193 /* KAME hack: embed scopeid */
194 if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
195 error = EINVAL;
196 goto release;
199 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
200 laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
201 in6p->in6p_moptions,
202 &in6p->in6p_route,
203 &in6p->in6p_laddr, &error);
204 } else
205 laddr = &in6p->in6p_laddr; /* XXX */
206 if (laddr == NULL) {
207 if (error == 0)
208 error = EADDRNOTAVAIL;
209 goto release;
211 if (in6p->in6p_lport == 0 &&
212 (error = in6_pcbsetport(laddr, in6p, td)) != 0)
213 goto release;
214 } else {
215 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
216 error = ENOTCONN;
217 goto release;
219 if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
220 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
222 * XXX: this case would happen when the
223 * application sets the V6ONLY flag after
224 * connecting the foreign address.
225 * Such applications should be fixed,
226 * so we bark here.
228 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
229 "option was set for a connected socket\n");
230 error = EINVAL;
231 goto release;
232 } else
233 af = AF_INET;
235 laddr = &in6p->in6p_laddr;
236 faddr = &in6p->in6p_faddr;
237 fport = in6p->in6p_fport;
240 if (af == AF_INET)
241 hlen = sizeof(struct ip);
244 * Calculate data length and get a mbuf
245 * for UDP and IP6 headers.
247 M_PREPEND(m, hlen + sizeof(struct udphdr), MB_DONTWAIT);
248 if (m == 0) {
249 error = ENOBUFS;
250 goto release;
254 * Stuff checksum and output datagram.
256 udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
257 udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
258 udp6->uh_dport = fport;
259 if (plen <= 0xffff)
260 udp6->uh_ulen = htons((u_short)plen);
261 else
262 udp6->uh_ulen = 0;
263 udp6->uh_sum = 0;
265 switch (af) {
266 case AF_INET6:
267 ip6 = mtod(m, struct ip6_hdr *);
268 ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
269 ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
270 ip6->ip6_vfc |= IPV6_VERSION;
271 #if 0 /* ip6_plen will be filled in ip6_output. */
272 ip6->ip6_plen = htons((u_short)plen);
273 #endif
274 ip6->ip6_nxt = IPPROTO_UDP;
275 ip6->ip6_hlim = in6_selecthlim(in6p,
276 in6p->in6p_route.ro_rt ?
277 in6p->in6p_route.ro_rt->rt_ifp : NULL);
278 ip6->ip6_src = *laddr;
279 ip6->ip6_dst = *faddr;
281 if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
282 sizeof(struct ip6_hdr), plen)) == 0) {
283 udp6->uh_sum = 0xffff;
286 flags = 0;
288 udp6stat.udp6s_opackets++;
289 error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route,
290 flags, in6p->in6p_moptions, NULL, in6p);
291 break;
292 case AF_INET:
293 error = EAFNOSUPPORT;
294 goto release;
296 goto releaseopt;
298 release:
299 m_freem(m);
301 releaseopt:
302 if (control) {
303 ip6_clearpktopts(in6p->in6p_outputopts, 0, -1);
304 in6p->in6p_outputopts = stickyopt;
305 m_freem(control);
307 return(error);