From fc29bf556ced78b0c0120eb81f99558e2b2093e6 Mon Sep 17 00:00:00 2001 From: Thomas Nikolajsen Date: Wed, 9 Jul 2008 16:23:56 +0000 Subject: [PATCH] In manual pages and LINT, - Fix paths; paths changed in past when source tree restructured. - Change .Fx/FreeBSD to .Dx/DragonFly where appropriate. --- share/man/man4/fdc.4 | 4 ++-- share/man/man4/man4.i386/ar.4 | 8 ++++---- share/man/man4/man4.i386/asr.4 | 4 ++-- share/man/man4/man4.i386/sr.4 | 8 ++++---- share/man/man4/targ.4 | 6 +++--- share/man/man9/cd.9 | 6 +++--- sys/config/LINT | 22 +++++++++++----------- usr.sbin/ndiscvt/ndiscvt.8 | 6 +++--- 8 files changed, 32 insertions(+), 32 deletions(-) diff --git a/share/man/man4/fdc.4 b/share/man/man4/fdc.4 index 02651b38bb..6c2ded47ef 100644 --- a/share/man/man4/fdc.4 +++ b/share/man/man4/fdc.4 @@ -25,7 +25,7 @@ .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD: src/share/man/man4/fdc.4,v 1.20.2.5 2001/10/01 13:07:23 dd Exp $ -.\" $DragonFly: src/share/man/man4/fdc.4,v 1.4 2007/11/22 20:13:38 swildner Exp $ +.\" $DragonFly: src/share/man/man4/fdc.4,v 1.5 2008/07/09 16:23:55 thomas Exp $ .\" .Dd August 31, 1994 .Dt FDC 4 @@ -71,7 +71,7 @@ floppy disk device nodes where the trailing number indicates the floppy capacity .It Pa /sys/config/GENERIC sample generic kernel config file -.It Pa /sys/isa/fd.c +.It Pa /sys/dev/disk/fd/fd.c floppy driver source .El .Sh SEE ALSO diff --git a/share/man/man4/man4.i386/ar.4 b/share/man/man4/man4.i386/ar.4 index c8fff491fb..31bd90a1fb 100644 --- a/share/man/man4/man4.i386/ar.4 +++ b/share/man/man4/man4.i386/ar.4 @@ -26,7 +26,7 @@ .\" SUCH DAMAGE. .\" .\" $FreeBSD: src/share/man/man4/man4.i386/ar.4,v 1.17.2.4 2001/08/17 13:08:45 ru Exp $ -.\" $DragonFly: src/share/man/man4/man4.i386/ar.4,v 1.7 2006/11/14 22:27:49 swildner Exp $ +.\" $DragonFly: src/share/man/man4/man4.i386/ar.4,v 1.8 2008/07/09 16:23:55 thomas Exp $ .\" .Dd November 19, 1995 .Dt AR 4 i386 @@ -47,7 +47,7 @@ HD64570 chip. Both the 2 and 4 port cards are supported and auto detected. .Pp The standard -.Fx +.Dx sppp code is used for the link level layer. The default protocol used is PPP. @@ -83,12 +83,12 @@ The node will have the same name as the device with ``sync_'' prepended, e.g., .Dv sync_ar0 . .Sh FILES -.Bl -tag -width /sys/machine/pc32/isa/ic/hd64570.h -compact +.Bl -tag -width /sys/platform/pc32/isa/ic/hd64570.h -compact .It Pa /sys/dev/netif/ar/if_ar.c .It Pa /sys/dev/netif/ar/if_ar.h .It Pa /sys/dev/netif/ar/if_ar_pci.c .It Pa /sys/dev/netif/ar/if_arregs.h -.It Pa /sys/machine/pc32/isa/ic/hd64570.h +.It Pa /sys/platform/pc32/isa/ic/hd64570.h .El .Sh DIAGNOSTICS .Bl -diag diff --git a/share/man/man4/man4.i386/asr.4 b/share/man/man4/man4.i386/asr.4 index 02d6ee2656..1918ad6c45 100644 --- a/share/man/man4/man4.i386/asr.4 +++ b/share/man/man4/man4.i386/asr.4 @@ -4,7 +4,7 @@ .\" Manpage cleanup by: Jeroen Ruigrok van der Werven .\" .\" $FreeBSD: src/share/man/man4/man4.i386/asr.4,v 1.2.2.8 2001/08/17 13:08:45 ru Exp $ -.\" $DragonFly: src/share/man/man4/man4.i386/asr.4,v 1.2 2003/06/17 04:36:59 dillon Exp $ +.\" $DragonFly: src/share/man/man4/man4.i386/asr.4,v 1.3 2008/07/09 16:23:55 thomas Exp $ .\" .Dd October 27, 2000 .Dt ASR 4 i386 @@ -61,7 +61,7 @@ on configuration utilities for the adapters. Currently there are both a GUI Motif based configuration utility and a CLI based configuration utility available from the Adaptec Web site. Note that in the absence of a native -.Fx +.Dx version of the configuration utilities does not mean one cannot configure the devices via the BIOS diff --git a/share/man/man4/man4.i386/sr.4 b/share/man/man4/man4.i386/sr.4 index 431ddff9df..e14e747972 100644 --- a/share/man/man4/man4.i386/sr.4 +++ b/share/man/man4/man4.i386/sr.4 @@ -29,7 +29,7 @@ .\" SUCH DAMAGE. .\" .\" $FreeBSD: src/share/man/man4/man4.i386/sr.4,v 1.15.2.4 2001/08/17 13:08:46 ru Exp $ -.\" $DragonFly: src/share/man/man4/man4.i386/sr.4,v 1.8 2008/05/02 02:05:06 swildner Exp $ +.\" $DragonFly: src/share/man/man4/man4.i386/sr.4,v 1.9 2008/07/09 16:23:55 thomas Exp $ .\" .Dd July 4, 1996 .Dt SR 4 i386 @@ -49,7 +49,7 @@ driver supports the RISCom/N2 ISA cards and the WANic 400/405 PCI cards that is based on the HD64570 chip. .Pp The standard -.Fx +.Dx sppp code is used for the link level layer. The default protocol used is PPP. @@ -109,12 +109,12 @@ The node will have the same name as the device with ``sync_'' prepended, e.g., .Dv sync_sr0 . .Sh FILES -.Bl -tag -width /sys/machine/pc32/isa/ic/hd64570.h -compact +.Bl -tag -width /sys/platform/pc32/isa/ic/hd64570.h -compact .It Pa /sys/dev/netif/sr/if_sr.c .It Pa /sys/dev/netif/sr/if_sr.h .It Pa /sys/dev/netif/sr/if_sr_pci.c .It Pa /sys/dev/netif/sr/if_srregs.h -.It Pa /sys/machine/pc32/isa/ic/hd64570.h +.It Pa /sys/platform/pc32/isa/ic/hd64570.h .El .Sh DIAGNOSTICS .Bl -diag diff --git a/share/man/man4/targ.4 b/share/man/man4/targ.4 index 9c8e0a9710..e7661a3805 100644 --- a/share/man/man4/targ.4 +++ b/share/man/man4/targ.4 @@ -23,7 +23,7 @@ .\" SUCH DAMAGE. .\" .\" $FreeBSD: src/share/man/man4/targ.4,v 1.3.2.1 2003/02/18 22:07:11 njl Exp $ -.\" $DragonFly: src/share/man/man4/targ.4,v 1.5 2007/04/26 17:35:03 swildner Exp $ +.\" $DragonFly: src/share/man/man4/targ.4,v 1.6 2008/07/09 16:23:55 thomas Exp $ .\" .Dd November 15, 2002 .Dt TARG 4 @@ -114,10 +114,10 @@ debugging if the argument is non-zero, otherwise disables it. .El .Sh FILES -.Bl -tag -width ".Pa /sys/cam/scsi/scsi_target.c" -compact +.Bl -tag -width ".Pa /sys/bus/cam/scsi/scsi_target.c" -compact .It In bus/cam/scsi/scsi_targetio.h describes the usermode interface. -.It Pa /sys/cam/scsi/scsi_target.c +.It Pa /sys/bus/cam/scsi/scsi_target.c is the driver source file. .It Pa /dev/targ* are the control devices. diff --git a/share/man/man9/cd.9 b/share/man/man9/cd.9 index 70d73e9c4a..e0d2fbf052 100644 --- a/share/man/man9/cd.9 +++ b/share/man/man9/cd.9 @@ -26,7 +26,7 @@ .\" SUCH DAMAGE. .\" .\" $FreeBSD: src/share/man/man9/cd.9,v 1.11.2.3 2002/04/15 06:06:40 trhodes Exp $ -.\" $DragonFly: src/share/man/man9/cd.9,v 1.2 2003/06/17 04:37:01 dillon Exp $ +.\" $DragonFly: src/share/man/man9/cd.9,v 1.3 2008/07/09 16:23:56 thomas Exp $ .\" .Dd October 10, 1998 .Dt CD 9 @@ -77,8 +77,8 @@ driver to run the initial read capacity command for LUN 0 of the changer through the changer scheduling code. .El .Sh FILES -.Bl -tag -width /sys/cam/scsi/scsi_cd.c -compact -.It Pa /sys/cam/scsi/scsi_cd.c +.Bl -tag -width /sys/bus/cam/scsi/scsi_cd.c -compact +.It Pa /sys/bus/cam/scsi/scsi_cd.c is the driver source file. .El .Sh SEE ALSO diff --git a/sys/config/LINT b/sys/config/LINT index cc3cbf3f54..d62c9c97b2 100644 --- a/sys/config/LINT +++ b/sys/config/LINT @@ -3,7 +3,7 @@ # as much of the source tree as it can. # # $FreeBSD: src/sys/i386/conf/LINT,v 1.749.2.144 2003/06/04 17:56:59 sam Exp $ -# $DragonFly: src/sys/config/LINT,v 1.165 2008/07/07 23:11:54 nant Exp $ +# $DragonFly: src/sys/config/LINT,v 1.166 2008/07/09 16:23:56 thomas Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -67,7 +67,7 @@ makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. # # Certain applications can grow to be larger than the 128M limit -# that FreeBSD initially imposes. Below are some options to +# that DragonFly initially imposes. Below are some options to # allow that limit to grow to 256MB, and can be increased further # with changing the parameters. MAXDSIZ is the maximum that the # limit can be set to, and the DFLDSIZ is the default value for @@ -359,7 +359,7 @@ options DDB_UNATTENDED # extension to the remote protocol that can be used to use the serial # port as both the debugging port and the system console. It's non- # standard and you're on your own if you enable it. See also the -# "remotechat" variables in the FreeBSD specific version of gdb. +# "remotechat" variables in the DragonFly specific version of gdb. # options GDB_REMOTE_CHAT @@ -415,7 +415,7 @@ options VISUAL_USERCONFIG #visual boot -c editor # # Protocol families: -# Only the INET (Internet) family is officially supported in FreeBSD. +# Only the INET (Internet) family is officially supported in DragonFly. # Source code for the NS (Xerox Network Service) is provided for amusement # value. # @@ -1057,7 +1057,7 @@ device pnpbios # versions. # # MAXMEM specifies the amount of RAM on the machine; if this is not -# specified, FreeBSD will first read the amount of memory from the CMOS +# specified, DragonFly will first read the amount of memory from the CMOS # RAM, so the amount of memory will initially be limited to 64MB or 16MB # depending on the BIOS. If the BIOS reports 64MB, a memory probe will # then attempt to detect the installed amount of RAM. If this probe @@ -1363,7 +1363,7 @@ options COM_MULTIPORT #code for some cards with shared IRQs # PCI Universal Communications driver # Supports various single and multi port PCI serial cards. Maybe later # also the parallel ports on combination serial/parallel cards. New cards -# can be added in src/sys/dev/puc/pucdata.c. +# can be added in src/sys/dev/misc/puc/pucdata.c. # # If the PUC_FASTINTR option is used the driver will try to use fast # interrupts. The card must then be the only user of that interrupt. @@ -1598,10 +1598,10 @@ device "snd_uaudio" # The cards can use an IRQ of 11, 12 or 15. # Notes on the Stallion stl and stli drivers: -# See src/i386/isa/README.stl for complete instructions. +# See src/sys/platform/pc32/isa/README.stl for complete instructions. # This is version 2.0.0, unsupported by Stallion. # The stl driver has a secondary IO port hard coded at 0x280. You need -# to change src/i386/isa/stallion.c if you reconfigure this on the boards. +# to change src/sys/dev/serial/stl/stallion.c if you reconfigure this on the boards. # The "flags" and "iosiz" settings on the stli driver depend on the board: # EasyConnection 8/64 ISA: flags 23 iosiz 0x1000 # EasyConnection 8/64 EISA: flags 24 iosiz 0x10000 @@ -1862,7 +1862,7 @@ options AHD_REG_PRETTY_PRINT # options OVERRIDE_MSP=1 # options OVERRIDE_DBX=1 # These options can be used to override the auto detection -# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h +# The current values for xxx are found in src/sys/dev/video/bktr/bktr_card.h # Using sysctl(8) run-time overrides on a per-card basis can be made # # options BKTR_SYSTEM_DEFAULT=BROOKTREE_PAL @@ -2464,7 +2464,7 @@ device asr # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and # Compaq are actually DPT controllers. # -# See src/sys/dev/dpt for debugging and other subtle options. +# See src/sys/dev/raid/dpt for debugging and other subtle options. # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various # instruments are enabled. The tools in # /usr/sbin/dpt_* assume these to be enabled. @@ -2474,7 +2474,7 @@ device asr # option will create more trouble than solve. # DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to # wait when timing out with the above option. -# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h +# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/raid/dpt.h # DPT_LOST_IRQ When enabled, will try, once per second, to catch # any interrupt that got lost. Seems to help in some # DPT-firmware/Motherboard combinations. Minimal diff --git a/usr.sbin/ndiscvt/ndiscvt.8 b/usr.sbin/ndiscvt/ndiscvt.8 index ff5854121b..5c10fb1419 100644 --- a/usr.sbin/ndiscvt/ndiscvt.8 +++ b/usr.sbin/ndiscvt/ndiscvt.8 @@ -29,7 +29,7 @@ .\" THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD: src/usr.sbin/ndiscvt/ndiscvt.8,v 1.4 2004/06/13 18:03:42 ru Exp $ -.\" $DragonFly: src/usr.sbin/ndiscvt/ndiscvt.8,v 1.1 2004/07/30 00:24:24 dillon Exp $ +.\" $DragonFly: src/usr.sbin/ndiscvt/ndiscvt.8,v 1.2 2008/07/09 16:23:56 thomas Exp $ .\" .Dd December 10, 2003 .Dt NDISCVT 8 @@ -39,7 +39,7 @@ .Nd convert .Tn Windows\[rg] NDIS drivers for use with -.Fx +.Dx .Sh SYNOPSIS .Nm .Op Fl i Ar inffile @@ -72,7 +72,7 @@ into .Pa if_ndis.c to create an object code module that can be linked into the -.Fx +.Dx kernel. .Pp The -- 2.11.4.GIT