2 * Copyright (c) 2006 The DragonFly Project. All rights reserved.
4 * This code is derived from software contributed to The DragonFly Project
5 * by Matthew Dillon <dillon@backplane.com>. AMD register addresses and
6 * values were pulled from MemTest-86 and Linux.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in
16 * the documentation and/or other materials provided with the
18 * 3. Neither the name of The DragonFly Project nor the names of its
19 * contributors may be used to endorse or promote products derived
20 * from this software without specific, prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
25 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
26 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
28 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
30 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
31 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
32 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 #include <sys/param.h>
37 #include <sys/systm.h>
39 #include <sys/kernel.h>
40 #include <sys/malloc.h>
42 #include <bus/pci/pcivar.h>
43 #include <bus/pci/pcireg.h>
44 #include <bus/pci/pci_cfgreg.h>
45 #include <bus/pci/pcib_private.h>
49 struct ecc_amd8000_memctrl
{
55 struct ecc_amd8000_softc
{
57 struct callout ecc_callout
;
60 #define ecc_printf(sc, fmt, arg...) \
61 device_printf((sc)->ecc_dev, fmt , ##arg)
63 static void ecc_amd8000_callout(void *);
64 static void ecc_amd8000_stop(device_t
);
66 static int ecc_amd8000_probe(device_t
);
67 static int ecc_amd8000_attach(device_t
);
68 static int ecc_amd8000_detach(device_t
);
69 static void ecc_amd8000_shutdown(device_t
);
71 static const struct ecc_amd8000_memctrl ecc_memctrls
[] = {
72 { 0x1022, 0x1100, "AMD 8000 memory controller" },
73 { 0x1022, 0x7454, "AMD 8151 memory controller" },
74 { 0, 0, NULL
} /* required last entry */
77 static device_method_t ecc_amd8000_methods
[] = {
78 /* Device interface */
79 DEVMETHOD(device_probe
, ecc_amd8000_probe
),
80 DEVMETHOD(device_attach
, ecc_amd8000_attach
),
81 DEVMETHOD(device_detach
, ecc_amd8000_detach
),
82 DEVMETHOD(device_shutdown
, ecc_amd8000_shutdown
),
83 DEVMETHOD(device_suspend
, bus_generic_suspend
),
84 DEVMETHOD(device_resume
, bus_generic_resume
),
88 static driver_t ecc_amd8000_driver
= {
91 sizeof(struct ecc_amd8000_softc
)
93 static devclass_t ecc_devclass
;
94 DRIVER_MODULE(ecc_amd8000
, pci
, ecc_amd8000_driver
, ecc_devclass
, NULL
, NULL
);
95 MODULE_DEPEND(ecc_amd8000
, pci
, 1, 1, 1);
96 MODULE_VERSION(ecc_amd8000
, 1);
99 ecc_amd8000_probe(device_t dev
)
101 const struct ecc_amd8000_memctrl
*mc
;
104 vid
= pci_get_vendor(dev
);
105 did
= pci_get_device(dev
);
107 for (mc
= ecc_memctrls
; mc
->desc
!= NULL
; ++mc
) {
108 if (mc
->vid
== vid
&& mc
->did
== did
) {
109 device_set_desc(dev
, mc
->desc
);
117 ecc_amd8000_attach(device_t dev
)
119 struct ecc_amd8000_softc
*sc
= device_get_softc(dev
);
120 uint32_t draminfo
, eccinfo
;
121 int bus
, slot
, poll
= 0;
123 callout_init_mp(&sc
->ecc_callout
);
126 bus
= pci_get_bus(dev
);
127 slot
= pci_get_slot(dev
);
130 * The memory bridge is recognized as four PCI devices
131 * using function codes 0, 1, 2, and 3. We probe for the
132 * device at function code 0 and assume that all four exist.
134 draminfo
= pcib_read_config(dev
, bus
, slot
, 2, 0x90, 4);
135 eccinfo
= pcib_read_config(dev
, bus
, slot
, 3, 0x44, 4);
137 if ((draminfo
>> 17) & 1)
138 ecc_printf(sc
, "memory type: ECC\n");
140 ecc_printf(sc
, "memory type: NON-ECC\n");
141 switch((eccinfo
>> 22) & 3) {
143 ecc_printf(sc
, "ecc mode: DISABLED\n");
146 ecc_printf(sc
, "ecc mode: ENABLED/CORRECT-MODE\n");
150 ecc_printf(sc
, "ecc mode: ENABLED/RESERVED (disabled)\n");
153 ecc_printf(sc
, "ecc mode: ENABLED/CHIPKILL-MODE\n");
159 * Enable ECC logging and clear any previous error.
166 wrmsr(0x17B, (v64
& ~0xFFFFFFFFLL
) | 0x00000010LL
);
167 v32
= pcib_read_config(dev
, bus
, slot
, 3, 0x4C, 4);
169 pcib_write_config(dev
, bus
, slot
, 3, 0x4C, v32
, 4);
171 callout_reset(&sc
->ecc_callout
, hz
, ecc_amd8000_callout
, sc
);
177 ecc_amd8000_callout(void *xsc
)
179 struct ecc_amd8000_softc
*sc
= xsc
;
180 device_t dev
= sc
->ecc_dev
;
184 bus
= pci_get_bus(dev
);
185 slot
= pci_get_slot(dev
);
188 * The address calculation is not entirely correct. We need to
189 * look at the AMD chipset documentation.
191 v32
= pcib_read_config(dev
, bus
, slot
, 3, 0x4C, 4);
192 if ((v32
& 0x80004000) == 0x80004000) {
193 addr
= pcib_read_config(dev
, bus
, slot
, 3, 0x50, 4);
194 ecc_printf(sc
, "Correctable ECC error at %08x\n", addr
);
195 pcib_write_config(dev
, bus
, slot
, 3, 0x4C, v32
& 0x7F801EFC, 4);
196 } else if ((v32
& 0x80002000) == 0x80002000) {
197 addr
= pcib_read_config(dev
, bus
,slot
, 3, 0x50, 4);
198 ecc_printf(sc
, "Uncorrectable ECC error at %08x\n", addr
);
199 pcib_write_config(dev
, bus
, slot
, 3, 0x4C, v32
& 0x7F801EFC, 4);
201 callout_reset(&sc
->ecc_callout
, hz
, ecc_amd8000_callout
, sc
);
205 ecc_amd8000_stop(device_t dev
)
207 struct ecc_amd8000_softc
*sc
= device_get_softc(dev
);
209 callout_stop_sync(&sc
->ecc_callout
);
213 ecc_amd8000_detach(device_t dev
)
215 ecc_amd8000_stop(dev
);
220 ecc_amd8000_shutdown(device_t dev
)
222 ecc_amd8000_stop(dev
);