4 * Copyright (c) 1998-2010 The DragonFly Project. All rights reserved.
6 * This code is derived from software contributed to The DragonFly Project
7 * by Matthew Dillon <dillon@backplane.com>
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in
17 * the documentation and/or other materials provided with the
19 * 3. Neither the name of The DragonFly Project nor the names of its
20 * contributors may be used to endorse or promote products derived
21 * from this software without specific, prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
24 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
25 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
26 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
27 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
29 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
31 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
33 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 * Copyright (c) 1994 John S. Dyson
37 * Copyright (c) 1990 University of Utah.
38 * Copyright (c) 1991, 1993
39 * The Regents of the University of California. All rights reserved.
41 * This code is derived from software contributed to Berkeley by
42 * the Systems Programming Group of the University of Utah Computer
45 * Redistribution and use in source and binary forms, with or without
46 * modification, are permitted provided that the following conditions
48 * 1. Redistributions of source code must retain the above copyright
49 * notice, this list of conditions and the following disclaimer.
50 * 2. Redistributions in binary form must reproduce the above copyright
51 * notice, this list of conditions and the following disclaimer in the
52 * documentation and/or other materials provided with the distribution.
53 * 3. Neither the name of the University nor the names of its contributors
54 * may be used to endorse or promote products derived from this software
55 * without specific prior written permission.
57 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
58 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
59 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
60 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
61 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
62 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
63 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
64 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
65 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
66 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
72 * Radix Bitmap 'blists'.
74 * - The new swapper uses the new radix bitmap code. This should scale
75 * to arbitrarily small or arbitrarily large swap spaces and an almost
76 * arbitrary degree of fragmentation.
80 * - on the fly reallocation of swap during putpages. The new system
81 * does not try to keep previously allocated swap blocks for dirty
84 * - on the fly deallocation of swap
86 * - No more garbage collection required. Unnecessarily allocated swap
87 * blocks only exist for dirty vm_page_t's now and these are already
88 * cycled (in a high-load system) by the pager. We also do on-the-fly
89 * removal of invalidated swap blocks when a page is destroyed
92 * from: Utah $Hdr: swap_pager.c 1.4 91/04/30$
93 * @(#)swap_pager.c 8.9 (Berkeley) 3/21/94
94 * $FreeBSD: src/sys/vm/swap_pager.c,v 1.130.2.12 2002/08/31 21:15:55 dillon Exp $
97 #include <sys/param.h>
98 #include <sys/systm.h>
100 #include <sys/kernel.h>
101 #include <sys/proc.h>
103 #include <sys/vnode.h>
104 #include <sys/malloc.h>
105 #include <sys/vmmeter.h>
106 #include <sys/sysctl.h>
107 #include <sys/blist.h>
108 #include <sys/lock.h>
109 #include <sys/kcollect.h>
112 #include "opt_swap.h"
114 #include <vm/vm_object.h>
115 #include <vm/vm_page.h>
116 #include <vm/vm_pager.h>
117 #include <vm/vm_pageout.h>
118 #include <vm/swap_pager.h>
119 #include <vm/vm_extern.h>
120 #include <vm/vm_zone.h>
121 #include <vm/vnode_pager.h>
123 #include <sys/thread2.h>
124 #include <sys/buf2.h>
125 #include <vm/vm_page2.h>
127 #ifndef MAX_PAGEOUT_CLUSTER
128 #define MAX_PAGEOUT_CLUSTER SWB_NPAGES
131 #define SWM_FREE 0x02 /* free, period */
132 #define SWM_POP 0x04 /* pop out */
134 #define SWBIO_READ 0x01
135 #define SWBIO_WRITE 0x02
136 #define SWBIO_SYNC 0x04
137 #define SWBIO_TTC 0x08 /* for VM_PAGER_TRY_TO_CACHE */
143 vm_pindex_t endi
; /* inclusive */
146 struct swswapoffinfo
{
153 * vm_swap_size is in page-sized chunks now. It was DEV_BSIZE'd chunks
157 int swap_pager_full
; /* swap space exhaustion (task killing) */
158 int swap_fail_ticks
; /* when we became exhausted */
159 int swap_pager_almost_full
; /* swap space exhaustion (w/ hysteresis)*/
160 swblk_t vm_swap_cache_use
;
161 swblk_t vm_swap_anon_use
;
162 static int vm_report_swap_allocs
;
164 static int nsw_rcount
; /* free read buffers */
165 static int nsw_wcount_sync
; /* limit write buffers / synchronous */
166 static int nsw_wcount_async
; /* limit write buffers / asynchronous */
167 static int nsw_wcount_async_max
;/* assigned maximum */
168 static int nsw_cluster_max
; /* maximum VOP I/O allowed */
170 struct blist
*swapblist
;
171 static int swap_async_max
= 4; /* maximum in-progress async I/O's */
172 static int swap_burst_read
= 0; /* allow burst reading */
173 static swblk_t swapiterator
; /* linearize allocations */
174 int swap_user_async
= 0; /* user swap pager operation can be async */
176 static struct spinlock swapbp_spin
= SPINLOCK_INITIALIZER(&swapbp_spin
, "swapbp_spin");
179 extern struct vnode
*swapdev_vp
;
180 extern struct swdevt
*swdevt
;
183 #define BLK2DEVIDX(blk) (nswdev > 1 ? blk / SWB_DMMAX % nswdev : 0)
185 SYSCTL_INT(_vm
, OID_AUTO
, swap_async_max
,
186 CTLFLAG_RW
, &swap_async_max
, 0, "Maximum running async swap ops");
187 SYSCTL_INT(_vm
, OID_AUTO
, swap_burst_read
,
188 CTLFLAG_RW
, &swap_burst_read
, 0, "Allow burst reads for pageins");
189 SYSCTL_INT(_vm
, OID_AUTO
, swap_user_async
,
190 CTLFLAG_RW
, &swap_user_async
, 0, "Allow async uuser swap write I/O");
193 SYSCTL_LONG(_vm
, OID_AUTO
, swap_cache_use
,
194 CTLFLAG_RD
, &vm_swap_cache_use
, 0, "");
195 SYSCTL_LONG(_vm
, OID_AUTO
, swap_anon_use
,
196 CTLFLAG_RD
, &vm_swap_anon_use
, 0, "");
197 SYSCTL_LONG(_vm
, OID_AUTO
, swap_size
,
198 CTLFLAG_RD
, &vm_swap_size
, 0, "");
200 SYSCTL_INT(_vm
, OID_AUTO
, swap_cache_use
,
201 CTLFLAG_RD
, &vm_swap_cache_use
, 0, "");
202 SYSCTL_INT(_vm
, OID_AUTO
, swap_anon_use
,
203 CTLFLAG_RD
, &vm_swap_anon_use
, 0, "");
204 SYSCTL_INT(_vm
, OID_AUTO
, swap_size
,
205 CTLFLAG_RD
, &vm_swap_size
, 0, "");
207 SYSCTL_INT(_vm
, OID_AUTO
, report_swap_allocs
,
208 CTLFLAG_RW
, &vm_report_swap_allocs
, 0, "");
213 * Red-Black tree for swblock entries
215 * The caller must hold vm_token
217 RB_GENERATE2(swblock_rb_tree
, swblock
, swb_entry
, rb_swblock_compare
,
218 vm_pindex_t
, swb_index
);
221 rb_swblock_compare(struct swblock
*swb1
, struct swblock
*swb2
)
223 if (swb1
->swb_index
< swb2
->swb_index
)
225 if (swb1
->swb_index
> swb2
->swb_index
)
232 rb_swblock_scancmp(struct swblock
*swb
, void *data
)
234 struct swfreeinfo
*info
= data
;
236 if (swb
->swb_index
< info
->basei
)
238 if (swb
->swb_index
> info
->endi
)
245 rb_swblock_condcmp(struct swblock
*swb
, void *data
)
247 struct swfreeinfo
*info
= data
;
249 if (swb
->swb_index
< info
->basei
)
255 * pagerops for OBJT_SWAP - "swap pager". Some ops are also global procedure
256 * calls hooked from other parts of the VM system and do not appear here.
257 * (see vm/swap_pager.h).
260 static void swap_pager_dealloc (vm_object_t object
);
261 static int swap_pager_getpage (vm_object_t
, vm_page_t
*, int);
262 static void swap_chain_iodone(struct bio
*biox
);
264 struct pagerops swappagerops
= {
265 swap_pager_dealloc
, /* deallocate an OBJT_SWAP object */
266 swap_pager_getpage
, /* pagein */
267 swap_pager_putpages
, /* pageout */
268 swap_pager_haspage
/* get backing store status for page */
272 * SWB_DMMAX is in page-sized chunks with the new swap system. It was
273 * dev-bsized chunks in the old. SWB_DMMAX is always a power of 2.
275 * swap_*() routines are externally accessible. swp_*() routines are
279 int nswap_lowat
= 128; /* in pages, swap_pager_almost_full warn */
280 int nswap_hiwat
= 512; /* in pages, swap_pager_almost_full warn */
282 static __inline
void swp_sizecheck (void);
283 static void swp_pager_async_iodone (struct bio
*bio
);
286 * Swap bitmap functions
289 static __inline
void swp_pager_freeswapspace(vm_object_t object
,
290 swblk_t blk
, int npages
);
291 static __inline swblk_t
swp_pager_getswapspace(vm_object_t object
, int npages
);
297 static void swp_pager_meta_convert(vm_object_t
);
298 static void swp_pager_meta_build(vm_object_t
, vm_pindex_t
, swblk_t
);
299 static void swp_pager_meta_free(vm_object_t
, vm_pindex_t
, vm_pindex_t
);
300 static void swp_pager_meta_free_all(vm_object_t
);
301 static swblk_t
swp_pager_meta_ctl(vm_object_t
, vm_pindex_t
, int);
304 * SWP_SIZECHECK() - update swap_pager_full indication
306 * update the swap_pager_almost_full indication and warn when we are
307 * about to run out of swap space, using lowat/hiwat hysteresis.
309 * Clear swap_pager_full ( task killing ) indication when lowat is met.
311 * No restrictions on call
312 * This routine may not block.
318 if (vm_swap_size
< nswap_lowat
) {
319 if (swap_pager_almost_full
== 0) {
320 kprintf("swap_pager: out of swap space\n");
321 swap_pager_almost_full
= 1;
322 swap_fail_ticks
= ticks
;
326 if (vm_swap_size
> nswap_hiwat
)
327 swap_pager_almost_full
= 0;
332 * Long-term data collection on 10-second interval. Return the value
333 * for KCOLLECT_SWAPPCT and set the values for SWAPANO and SWAPCCAC.
335 * Return total swap in the scale field. This can change if swap is
336 * regularly added or removed and may cause some historical confusion
337 * in that case, but SWAPPCT will always be historically accurate.
340 #define PTOB(value) ((uint64_t)(value) << PAGE_SHIFT)
343 collect_swap_callback(int n
)
345 uint64_t total
= vm_swap_max
;
346 uint64_t anon
= vm_swap_anon_use
;
347 uint64_t cache
= vm_swap_cache_use
;
349 if (total
== 0) /* avoid divide by zero */
351 kcollect_setvalue(KCOLLECT_SWAPANO
, PTOB(anon
));
352 kcollect_setvalue(KCOLLECT_SWAPCAC
, PTOB(cache
));
353 kcollect_setscale(KCOLLECT_SWAPANO
,
354 KCOLLECT_SCALE(KCOLLECT_SWAPANO_FORMAT
, PTOB(total
)));
355 kcollect_setscale(KCOLLECT_SWAPCAC
,
356 KCOLLECT_SCALE(KCOLLECT_SWAPCAC_FORMAT
, PTOB(total
)));
357 return (((anon
+ cache
) * 10000 + (total
>> 1)) / total
);
361 * SWAP_PAGER_INIT() - initialize the swap pager!
363 * Expected to be started from system init. NOTE: This code is run
364 * before much else so be careful what you depend on. Most of the VM
365 * system has yet to be initialized at this point.
367 * Called from the low level boot code only.
370 swap_pager_init(void *arg __unused
)
372 kcollect_register(KCOLLECT_SWAPPCT
, "swapuse", collect_swap_callback
,
373 KCOLLECT_SCALE(KCOLLECT_SWAPPCT_FORMAT
, 0));
374 kcollect_register(KCOLLECT_SWAPANO
, "swapano", NULL
,
375 KCOLLECT_SCALE(KCOLLECT_SWAPANO_FORMAT
, 0));
376 kcollect_register(KCOLLECT_SWAPCAC
, "swapcac", NULL
,
377 KCOLLECT_SCALE(KCOLLECT_SWAPCAC_FORMAT
, 0));
379 SYSINIT(vm_mem
, SI_BOOT1_VM
, SI_ORDER_THIRD
, swap_pager_init
, NULL
);
382 * SWAP_PAGER_SWAP_INIT() - swap pager initialization from pageout process
384 * Expected to be started from pageout process once, prior to entering
387 * Called from the low level boot code only.
390 swap_pager_swap_init(void)
395 * Number of in-transit swap bp operations. Don't
396 * exhaust the pbufs completely. Make sure we
397 * initialize workable values (0 will work for hysteresis
398 * but it isn't very efficient).
400 * The nsw_cluster_max is constrained by the number of pages an XIO
401 * holds, i.e., (MAXPHYS/PAGE_SIZE) and our locally defined
402 * MAX_PAGEOUT_CLUSTER. Also be aware that swap ops are
403 * constrained by the swap device interleave stripe size.
405 * Currently we hardwire nsw_wcount_async to 4. This limit is
406 * designed to prevent other I/O from having high latencies due to
407 * our pageout I/O. The value 4 works well for one or two active swap
408 * devices but is probably a little low if you have more. Even so,
409 * a higher value would probably generate only a limited improvement
410 * with three or four active swap devices since the system does not
411 * typically have to pageout at extreme bandwidths. We will want
412 * at least 2 per swap devices, and 4 is a pretty good value if you
413 * have one NFS swap device due to the command/ack latency over NFS.
414 * So it all works out pretty well.
417 nsw_cluster_max
= min((MAXPHYS
/PAGE_SIZE
), MAX_PAGEOUT_CLUSTER
);
419 nsw_rcount
= (nswbuf_kva
+ 1) / 2;
420 nsw_wcount_sync
= (nswbuf_kva
+ 3) / 4;
421 nsw_wcount_async
= 4;
422 nsw_wcount_async_max
= nsw_wcount_async
;
425 * The zone is dynamically allocated so generally size it to
426 * maxswzone (32MB to 256GB of KVM). Set a minimum size based
427 * on physical memory of around 8x (each swblock can hold 16 pages).
429 * With the advent of SSDs (vs HDs) the practical (swap:memory) ratio
430 * has increased dramatically.
432 n
= vmstats
.v_page_count
/ 2;
433 if (maxswzone
&& n
< maxswzone
/ sizeof(struct swblock
))
434 n
= maxswzone
/ sizeof(struct swblock
);
440 sizeof(struct swblock
),
443 if (swap_zone
!= NULL
)
446 * if the allocation failed, try a zone two thirds the
447 * size of the previous attempt.
452 if (swap_zone
== NULL
)
453 panic("swap_pager_swap_init: swap_zone == NULL");
455 kprintf("Swap zone entries reduced from %d to %d.\n", n2
, n
);
459 * SWAP_PAGER_ALLOC() - allocate a new OBJT_SWAP VM object and instantiate
460 * its metadata structures.
462 * This routine is called from the mmap and fork code to create a new
463 * OBJT_SWAP object. We do this by creating an OBJT_DEFAULT object
464 * and then converting it with swp_pager_meta_convert().
466 * We only support unnamed objects.
471 swap_pager_alloc(void *handle
, off_t size
, vm_prot_t prot
, off_t offset
)
475 KKASSERT(handle
== NULL
);
476 object
= vm_object_allocate_hold(OBJT_DEFAULT
,
477 OFF_TO_IDX(offset
+ PAGE_MASK
+ size
));
478 swp_pager_meta_convert(object
);
479 vm_object_drop(object
);
485 * SWAP_PAGER_DEALLOC() - remove swap metadata from object
487 * The swap backing for the object is destroyed. The code is
488 * designed such that we can reinstantiate it later, but this
489 * routine is typically called only when the entire object is
490 * about to be destroyed.
492 * The object must be locked or unreferenceable.
493 * No other requirements.
496 swap_pager_dealloc(vm_object_t object
)
498 vm_object_hold(object
);
499 vm_object_pip_wait(object
, "swpdea");
502 * Free all remaining metadata. We only bother to free it from
503 * the swap meta data. We do not attempt to free swapblk's still
504 * associated with vm_page_t's for this object. We do not care
505 * if paging is still in progress on some objects.
507 swp_pager_meta_free_all(object
);
508 vm_object_drop(object
);
511 /************************************************************************
512 * SWAP PAGER BITMAP ROUTINES *
513 ************************************************************************/
516 * SWP_PAGER_GETSWAPSPACE() - allocate raw swap space
518 * Allocate swap for the requested number of pages. The starting
519 * swap block number (a page index) is returned or SWAPBLK_NONE
520 * if the allocation failed.
522 * Also has the side effect of advising that somebody made a mistake
523 * when they configured swap and didn't configure enough.
525 * The caller must hold the object.
526 * This routine may not block.
528 static __inline swblk_t
529 swp_pager_getswapspace(vm_object_t object
, int npages
)
533 lwkt_gettoken(&vm_token
);
534 blk
= blist_allocat(swapblist
, npages
, swapiterator
);
535 if (blk
== SWAPBLK_NONE
)
536 blk
= blist_allocat(swapblist
, npages
, 0);
537 if (blk
== SWAPBLK_NONE
) {
538 if (swap_pager_full
!= 2) {
539 if (vm_swap_max
== 0)
540 kprintf("Warning: The system would like to "
541 "page to swap but no swap space "
544 kprintf("swap_pager_getswapspace: "
545 "swap full allocating %d pages\n",
548 if (swap_pager_almost_full
== 0)
549 swap_fail_ticks
= ticks
;
550 swap_pager_almost_full
= 1;
553 /* swapiterator = blk; disable for now, doesn't work well */
554 swapacctspace(blk
, -npages
);
555 if (object
->type
== OBJT_SWAP
)
556 vm_swap_anon_use
+= npages
;
558 vm_swap_cache_use
+= npages
;
561 lwkt_reltoken(&vm_token
);
566 * SWP_PAGER_FREESWAPSPACE() - free raw swap space
568 * This routine returns the specified swap blocks back to the bitmap.
570 * Note: This routine may not block (it could in the old swap code),
571 * and through the use of the new blist routines it does not block.
573 * This routine may not block.
577 swp_pager_freeswapspace(vm_object_t object
, swblk_t blk
, int npages
)
579 struct swdevt
*sp
= &swdevt
[BLK2DEVIDX(blk
)];
581 lwkt_gettoken(&vm_token
);
582 sp
->sw_nused
-= npages
;
583 if (object
->type
== OBJT_SWAP
)
584 vm_swap_anon_use
-= npages
;
586 vm_swap_cache_use
-= npages
;
588 if (sp
->sw_flags
& SW_CLOSING
) {
589 lwkt_reltoken(&vm_token
);
593 blist_free(swapblist
, blk
, npages
);
594 vm_swap_size
+= npages
;
596 lwkt_reltoken(&vm_token
);
600 * SWAP_PAGER_FREESPACE() - frees swap blocks associated with a page
601 * range within an object.
603 * This is a globally accessible routine.
605 * This routine removes swapblk assignments from swap metadata.
607 * The external callers of this routine typically have already destroyed
608 * or renamed vm_page_t's associated with this range in the object so
614 swap_pager_freespace(vm_object_t object
, vm_pindex_t start
, vm_pindex_t size
)
616 vm_object_hold(object
);
617 swp_pager_meta_free(object
, start
, size
);
618 vm_object_drop(object
);
625 swap_pager_freespace_all(vm_object_t object
)
627 vm_object_hold(object
);
628 swp_pager_meta_free_all(object
);
629 vm_object_drop(object
);
633 * This function conditionally frees swap cache swap starting at
634 * (*basei) in the object. (count) swap blocks will be nominally freed.
635 * The actual number of blocks freed can be more or less than the
638 * This function nominally returns the number of blocks freed. However,
639 * the actual number of blocks freed may be less then the returned value.
640 * If the function is unable to exhaust the object or if it is able to
641 * free (approximately) the requested number of blocks it returns
644 * If we exhaust the object we will return a value n <= count.
646 * The caller must hold the object.
648 * WARNING! If count == 0 then -1 can be returned as a degenerate case,
649 * callers should always pass a count value > 0.
651 static int swap_pager_condfree_callback(struct swblock
*swap
, void *data
);
654 swap_pager_condfree(vm_object_t object
, vm_pindex_t
*basei
, int count
)
656 struct swfreeinfo info
;
660 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
662 info
.object
= object
;
663 info
.basei
= *basei
; /* skip up to this page index */
664 info
.begi
= count
; /* max swap pages to destroy */
665 info
.endi
= count
* 8; /* max swblocks to scan */
667 swblock_rb_tree_RB_SCAN(&object
->swblock_root
, rb_swblock_condcmp
,
668 swap_pager_condfree_callback
, &info
);
672 * Take the higher difference swblocks vs pages
674 n
= count
- (int)info
.begi
;
675 t
= count
* 8 - (int)info
.endi
;
684 * The idea is to free whole meta-block to avoid fragmenting
685 * the swap space or disk I/O. We only do this if NO VM pages
688 * We do not have to deal with clearing PG_SWAPPED in related VM
689 * pages because there are no related VM pages.
691 * The caller must hold the object.
694 swap_pager_condfree_callback(struct swblock
*swap
, void *data
)
696 struct swfreeinfo
*info
= data
;
697 vm_object_t object
= info
->object
;
700 for (i
= 0; i
< SWAP_META_PAGES
; ++i
) {
701 if (vm_page_lookup(object
, swap
->swb_index
+ i
))
704 info
->basei
= swap
->swb_index
+ SWAP_META_PAGES
;
705 if (i
== SWAP_META_PAGES
) {
706 info
->begi
-= swap
->swb_count
;
707 swap_pager_freespace(object
, swap
->swb_index
, SWAP_META_PAGES
);
710 if ((int)info
->begi
< 0 || (int)info
->endi
< 0)
717 * Called by vm_page_alloc() when a new VM page is inserted
718 * into a VM object. Checks whether swap has been assigned to
719 * the page and sets PG_SWAPPED as necessary.
721 * (m) must be busied by caller and remains busied on return.
724 swap_pager_page_inserted(vm_page_t m
)
726 if (m
->object
->swblock_count
) {
727 vm_object_hold(m
->object
);
728 if (swp_pager_meta_ctl(m
->object
, m
->pindex
, 0) != SWAPBLK_NONE
)
729 vm_page_flag_set(m
, PG_SWAPPED
);
730 vm_object_drop(m
->object
);
735 * SWAP_PAGER_RESERVE() - reserve swap blocks in object
737 * Assigns swap blocks to the specified range within the object. The
738 * swap blocks are not zerod. Any previous swap assignment is destroyed.
740 * Returns 0 on success, -1 on failure.
742 * The caller is responsible for avoiding races in the specified range.
743 * No other requirements.
746 swap_pager_reserve(vm_object_t object
, vm_pindex_t start
, vm_size_t size
)
749 swblk_t blk
= SWAPBLK_NONE
;
750 vm_pindex_t beg
= start
; /* save start index */
752 vm_object_hold(object
);
757 while ((blk
= swp_pager_getswapspace(object
, n
)) ==
762 swp_pager_meta_free(object
, beg
,
764 vm_object_drop(object
);
769 swp_pager_meta_build(object
, start
, blk
);
775 swp_pager_meta_free(object
, start
, n
);
776 vm_object_drop(object
);
781 * SWAP_PAGER_COPY() - copy blocks from source pager to destination pager
782 * and destroy the source.
784 * Copy any valid swapblks from the source to the destination. In
785 * cases where both the source and destination have a valid swapblk,
786 * we keep the destination's.
788 * This routine is allowed to block. It may block allocating metadata
789 * indirectly through swp_pager_meta_build() or if paging is still in
790 * progress on the source.
792 * XXX vm_page_collapse() kinda expects us not to block because we
793 * supposedly do not need to allocate memory, but for the moment we
794 * *may* have to get a little memory from the zone allocator, but
795 * it is taken from the interrupt memory. We should be ok.
797 * The source object contains no vm_page_t's (which is just as well)
798 * The source object is of type OBJT_SWAP.
800 * The source and destination objects must be held by the caller.
803 swap_pager_copy(vm_object_t srcobject
, vm_object_t dstobject
,
804 vm_pindex_t base_index
, int destroysource
)
808 ASSERT_LWKT_TOKEN_HELD(vm_object_token(srcobject
));
809 ASSERT_LWKT_TOKEN_HELD(vm_object_token(dstobject
));
812 * transfer source to destination.
814 for (i
= 0; i
< dstobject
->size
; ++i
) {
818 * Locate (without changing) the swapblk on the destination,
819 * unless it is invalid in which case free it silently, or
820 * if the destination is a resident page, in which case the
821 * source is thrown away.
823 dstaddr
= swp_pager_meta_ctl(dstobject
, i
, 0);
825 if (dstaddr
== SWAPBLK_NONE
) {
827 * Destination has no swapblk and is not resident,
832 srcaddr
= swp_pager_meta_ctl(srcobject
,
833 base_index
+ i
, SWM_POP
);
835 if (srcaddr
!= SWAPBLK_NONE
)
836 swp_pager_meta_build(dstobject
, i
, srcaddr
);
839 * Destination has valid swapblk or it is represented
840 * by a resident page. We destroy the sourceblock.
842 swp_pager_meta_ctl(srcobject
, base_index
+ i
, SWM_FREE
);
847 * Free left over swap blocks in source.
849 * We have to revert the type to OBJT_DEFAULT so we do not accidently
850 * double-remove the object from the swap queues.
854 * Reverting the type is not necessary, the caller is going
855 * to destroy srcobject directly, but I'm doing it here
856 * for consistency since we've removed the object from its
859 swp_pager_meta_free_all(srcobject
);
860 if (srcobject
->type
== OBJT_SWAP
)
861 srcobject
->type
= OBJT_DEFAULT
;
866 * SWAP_PAGER_HASPAGE() - determine if we have good backing store for
867 * the requested page.
869 * We determine whether good backing store exists for the requested
870 * page and return TRUE if it does, FALSE if it doesn't.
872 * If TRUE, we also try to determine how much valid, contiguous backing
873 * store exists before and after the requested page within a reasonable
874 * distance. We do not try to restrict it to the swap device stripe
875 * (that is handled in getpages/putpages). It probably isn't worth
881 swap_pager_haspage(vm_object_t object
, vm_pindex_t pindex
)
886 * do we have good backing store at the requested index ?
888 vm_object_hold(object
);
889 blk0
= swp_pager_meta_ctl(object
, pindex
, 0);
891 if (blk0
== SWAPBLK_NONE
) {
892 vm_object_drop(object
);
895 vm_object_drop(object
);
900 * SWAP_PAGER_PAGE_UNSWAPPED() - remove swap backing store related to page
902 * This removes any associated swap backing store, whether valid or
903 * not, from the page. This operates on any VM object, not just OBJT_SWAP
906 * This routine is typically called when a page is made dirty, at
907 * which point any associated swap can be freed. MADV_FREE also
908 * calls us in a special-case situation
910 * NOTE!!! If the page is clean and the swap was valid, the caller
911 * should make the page dirty before calling this routine.
912 * This routine does NOT change the m->dirty status of the page.
913 * Also: MADV_FREE depends on it.
915 * The page must be busied.
916 * The caller can hold the object to avoid blocking, else we might block.
917 * No other requirements.
920 swap_pager_unswapped(vm_page_t m
)
922 if (m
->flags
& PG_SWAPPED
) {
923 vm_object_hold(m
->object
);
924 KKASSERT(m
->flags
& PG_SWAPPED
);
925 swp_pager_meta_ctl(m
->object
, m
->pindex
, SWM_FREE
);
926 vm_page_flag_clear(m
, PG_SWAPPED
);
927 vm_object_drop(m
->object
);
932 * SWAP_PAGER_STRATEGY() - read, write, free blocks
934 * This implements a VM OBJECT strategy function using swap backing store.
935 * This can operate on any VM OBJECT type, not necessarily just OBJT_SWAP
936 * types. Only BUF_CMD_{READ,WRITE,FREEBLKS} is supported, any other
937 * requests will return EINVAL.
939 * This is intended to be a cacheless interface (i.e. caching occurs at
940 * higher levels), and is also used as a swap-based SSD cache for vnode
941 * and device objects.
943 * All I/O goes directly to and from the swap device.
945 * We currently attempt to run I/O synchronously or asynchronously as
946 * the caller requests. This isn't perfect because we loose error
947 * sequencing when we run multiple ops in parallel to satisfy a request.
948 * But this is swap, so we let it all hang out.
950 * NOTE: This function supports the KVABIO API wherein bp->b_data might
951 * not be synchronized to the current cpu.
956 swap_pager_strategy(vm_object_t object
, struct bio
*bio
)
958 struct buf
*bp
= bio
->bio_buf
;
961 vm_pindex_t biox_blkno
= 0;
967 struct bio_track
*track
;
972 * tracking for swapdev vnode I/Os
974 if (bp
->b_cmd
== BUF_CMD_READ
)
975 track
= &swapdev_vp
->v_track_read
;
977 track
= &swapdev_vp
->v_track_write
;
981 * Only supported commands
983 if (bp
->b_cmd
!= BUF_CMD_FREEBLKS
&&
984 bp
->b_cmd
!= BUF_CMD_READ
&&
985 bp
->b_cmd
!= BUF_CMD_WRITE
) {
986 bp
->b_error
= EINVAL
;
987 bp
->b_flags
|= B_ERROR
| B_INVAL
;
993 * bcount must be an integral number of pages.
995 if (bp
->b_bcount
& PAGE_MASK
) {
996 bp
->b_error
= EINVAL
;
997 bp
->b_flags
|= B_ERROR
| B_INVAL
;
999 kprintf("swap_pager_strategy: bp %p offset %lld size %d, "
1000 "not page bounded\n",
1001 bp
, (long long)bio
->bio_offset
, (int)bp
->b_bcount
);
1006 * Clear error indication, initialize page index, count, data pointer.
1009 bp
->b_flags
&= ~B_ERROR
;
1010 bp
->b_resid
= bp
->b_bcount
;
1012 start
= (vm_pindex_t
)(bio
->bio_offset
>> PAGE_SHIFT
);
1013 count
= howmany(bp
->b_bcount
, PAGE_SIZE
);
1016 * WARNING! Do not dereference *data without issuing a bkvasync()
1021 * Deal with BUF_CMD_FREEBLKS
1023 if (bp
->b_cmd
== BUF_CMD_FREEBLKS
) {
1025 * FREE PAGE(s) - destroy underlying swap that is no longer
1028 vm_object_hold(object
);
1029 swp_pager_meta_free(object
, start
, count
);
1030 vm_object_drop(object
);
1037 * We need to be able to create a new cluster of I/O's. We cannot
1038 * use the caller fields of the passed bio so push a new one.
1040 * Because nbio is just a placeholder for the cluster links,
1041 * we can biodone() the original bio instead of nbio to make
1042 * things a bit more efficient.
1044 nbio
= push_bio(bio
);
1045 nbio
->bio_offset
= bio
->bio_offset
;
1046 nbio
->bio_caller_info1
.cluster_head
= NULL
;
1047 nbio
->bio_caller_info2
.cluster_tail
= NULL
;
1053 * Execute read or write
1055 vm_object_hold(object
);
1061 * Obtain block. If block not found and writing, allocate a
1062 * new block and build it into the object.
1064 blk
= swp_pager_meta_ctl(object
, start
, 0);
1065 if ((blk
== SWAPBLK_NONE
) && bp
->b_cmd
== BUF_CMD_WRITE
) {
1066 blk
= swp_pager_getswapspace(object
, 1);
1067 if (blk
== SWAPBLK_NONE
) {
1068 bp
->b_error
= ENOMEM
;
1069 bp
->b_flags
|= B_ERROR
;
1072 swp_pager_meta_build(object
, start
, blk
);
1076 * Do we have to flush our current collection? Yes if:
1078 * - no swap block at this index
1079 * - swap block is not contiguous
1080 * - we cross a physical disk boundry in the
1084 (biox_blkno
+ btoc(bufx
->b_bcount
) != blk
||
1085 ((biox_blkno
^ blk
) & ~SWB_DMMASK
))) {
1088 ++mycpu
->gd_cnt
.v_swapin
;
1089 mycpu
->gd_cnt
.v_swappgsin
+=
1090 btoc(bufx
->b_bcount
);
1093 ++mycpu
->gd_cnt
.v_swapout
;
1094 mycpu
->gd_cnt
.v_swappgsout
+=
1095 btoc(bufx
->b_bcount
);
1096 bufx
->b_dirtyend
= bufx
->b_bcount
;
1104 * Finished with this buf.
1106 KKASSERT(bufx
->b_bcount
!= 0);
1107 if (bufx
->b_cmd
!= BUF_CMD_READ
)
1108 bufx
->b_dirtyend
= bufx
->b_bcount
;
1114 * Add new swapblk to biox, instantiating biox if necessary.
1115 * Zero-fill reads are able to take a shortcut.
1117 if (blk
== SWAPBLK_NONE
) {
1119 * We can only get here if we are reading.
1122 bzero(data
, PAGE_SIZE
);
1123 bp
->b_resid
-= PAGE_SIZE
;
1126 /* XXX chain count > 4, wait to <= 4 */
1128 bufx
= getpbuf(NULL
);
1129 bufx
->b_flags
|= B_KVABIO
;
1130 biox
= &bufx
->b_bio1
;
1131 cluster_append(nbio
, bufx
);
1132 bufx
->b_cmd
= bp
->b_cmd
;
1133 biox
->bio_done
= swap_chain_iodone
;
1134 biox
->bio_offset
= (off_t
)blk
<< PAGE_SHIFT
;
1135 biox
->bio_caller_info1
.cluster_parent
= nbio
;
1138 bufx
->b_data
= data
;
1140 bufx
->b_bcount
+= PAGE_SIZE
;
1147 vm_object_drop(object
);
1150 * Flush out last buffer
1153 if (bufx
->b_cmd
== BUF_CMD_READ
) {
1154 ++mycpu
->gd_cnt
.v_swapin
;
1155 mycpu
->gd_cnt
.v_swappgsin
+= btoc(bufx
->b_bcount
);
1157 ++mycpu
->gd_cnt
.v_swapout
;
1158 mycpu
->gd_cnt
.v_swappgsout
+= btoc(bufx
->b_bcount
);
1159 bufx
->b_dirtyend
= bufx
->b_bcount
;
1161 KKASSERT(bufx
->b_bcount
);
1162 if (bufx
->b_cmd
!= BUF_CMD_READ
)
1163 bufx
->b_dirtyend
= bufx
->b_bcount
;
1164 /* biox, bufx = NULL */
1168 * Now initiate all the I/O. Be careful looping on our chain as
1169 * I/O's may complete while we are still initiating them.
1171 * If the request is a 100% sparse read no bios will be present
1172 * and we just biodone() the buffer.
1174 nbio
->bio_caller_info2
.cluster_tail
= NULL
;
1175 bufx
= nbio
->bio_caller_info1
.cluster_head
;
1179 biox
= &bufx
->b_bio1
;
1181 bufx
= bufx
->b_cluster_next
;
1182 vn_strategy(swapdev_vp
, biox
);
1189 * Completion of the cluster will also call biodone_chain(nbio).
1190 * We never call biodone(nbio) so we don't have to worry about
1191 * setting up a bio_done callback. It's handled in the sub-IO.
1202 swap_chain_iodone(struct bio
*biox
)
1205 struct buf
*bufx
; /* chained sub-buffer */
1206 struct bio
*nbio
; /* parent nbio with chain glue */
1207 struct buf
*bp
; /* original bp associated with nbio */
1210 bufx
= biox
->bio_buf
;
1211 nbio
= biox
->bio_caller_info1
.cluster_parent
;
1215 * Update the original buffer
1217 KKASSERT(bp
!= NULL
);
1218 if (bufx
->b_flags
& B_ERROR
) {
1219 atomic_set_int(&bufx
->b_flags
, B_ERROR
);
1220 bp
->b_error
= bufx
->b_error
; /* race ok */
1221 } else if (bufx
->b_resid
!= 0) {
1222 atomic_set_int(&bufx
->b_flags
, B_ERROR
);
1223 bp
->b_error
= EINVAL
; /* race ok */
1225 atomic_subtract_int(&bp
->b_resid
, bufx
->b_bcount
);
1229 * Remove us from the chain.
1231 spin_lock(&swapbp_spin
);
1232 nextp
= &nbio
->bio_caller_info1
.cluster_head
;
1233 while (*nextp
!= bufx
) {
1234 KKASSERT(*nextp
!= NULL
);
1235 nextp
= &(*nextp
)->b_cluster_next
;
1237 *nextp
= bufx
->b_cluster_next
;
1238 chain_empty
= (nbio
->bio_caller_info1
.cluster_head
== NULL
);
1239 spin_unlock(&swapbp_spin
);
1242 * Clean up bufx. If the chain is now empty we finish out
1243 * the parent. Note that we may be racing other completions
1244 * so we must use the chain_empty status from above.
1247 if (bp
->b_resid
!= 0 && !(bp
->b_flags
& B_ERROR
)) {
1248 atomic_set_int(&bp
->b_flags
, B_ERROR
);
1249 bp
->b_error
= EINVAL
;
1251 biodone_chain(nbio
);
1253 relpbuf(bufx
, NULL
);
1257 * SWAP_PAGER_GETPAGES() - bring page in from swap
1259 * The requested page may have to be brought in from swap. Calculate the
1260 * swap block and bring in additional pages if possible. All pages must
1261 * have contiguous swap block assignments and reside in the same object.
1263 * The caller has a single vm_object_pip_add() reference prior to
1264 * calling us and we should return with the same.
1266 * The caller has BUSY'd the page. We should return with (*mpp) left busy,
1267 * and any additinal pages unbusied.
1269 * If the caller encounters a PG_RAM page it will pass it to us even though
1270 * it may be valid and dirty. We cannot overwrite the page in this case!
1271 * The case is used to allow us to issue pure read-aheads.
1273 * NOTE! XXX This code does not entirely pipeline yet due to the fact that
1274 * the PG_RAM page is validated at the same time as mreq. What we
1275 * really need to do is issue a separate read-ahead pbuf.
1280 swap_pager_getpage(vm_object_t object
, vm_page_t
*mpp
, int seqaccess
)
1292 u_int32_t busy_count
;
1293 vm_page_t marray
[XIO_INTERNAL_PAGES
];
1297 vm_object_hold(object
);
1298 if (mreq
->object
!= object
) {
1299 panic("swap_pager_getpages: object mismatch %p/%p",
1306 * We don't want to overwrite a fully valid page as it might be
1307 * dirty. This case can occur when e.g. vm_fault hits a perfectly
1308 * valid page with PG_RAM set.
1310 * In this case we see if the next page is a suitable page-in
1311 * candidate and if it is we issue read-ahead. PG_RAM will be
1312 * set on the last page of the read-ahead to continue the pipeline.
1314 if (mreq
->valid
== VM_PAGE_BITS_ALL
) {
1315 if (swap_burst_read
== 0 || mreq
->pindex
+ 1 >= object
->size
) {
1316 vm_object_drop(object
);
1317 return(VM_PAGER_OK
);
1319 blk
= swp_pager_meta_ctl(object
, mreq
->pindex
+ 1, 0);
1320 if (blk
== SWAPBLK_NONE
) {
1321 vm_object_drop(object
);
1322 return(VM_PAGER_OK
);
1324 m
= vm_page_lookup_busy_try(object
, mreq
->pindex
+ 1,
1327 vm_object_drop(object
);
1328 return(VM_PAGER_OK
);
1329 } else if (m
== NULL
) {
1331 * Use VM_ALLOC_QUICK to avoid blocking on cache
1334 m
= vm_page_alloc(object
, mreq
->pindex
+ 1,
1337 vm_object_drop(object
);
1338 return(VM_PAGER_OK
);
1343 vm_object_drop(object
);
1344 return(VM_PAGER_OK
);
1346 vm_page_unqueue_nowakeup(m
);
1356 * Try to block-read contiguous pages from swap if sequential,
1357 * otherwise just read one page. Contiguous pages from swap must
1358 * reside within a single device stripe because the I/O cannot be
1359 * broken up across multiple stripes.
1361 * Note that blk and iblk can be SWAPBLK_NONE but the loop is
1362 * set up such that the case(s) are handled implicitly.
1364 blk
= swp_pager_meta_ctl(mreq
->object
, mreq
->pindex
, 0);
1367 for (i
= 1; i
<= swap_burst_read
&&
1368 i
< XIO_INTERNAL_PAGES
&&
1369 mreq
->pindex
+ i
< object
->size
; ++i
) {
1372 iblk
= swp_pager_meta_ctl(object
, mreq
->pindex
+ i
, 0);
1373 if (iblk
!= blk
+ i
)
1375 if ((blk
^ iblk
) & ~SWB_DMMASK
)
1377 m
= vm_page_lookup_busy_try(object
, mreq
->pindex
+ i
,
1381 } else if (m
== NULL
) {
1383 * Use VM_ALLOC_QUICK to avoid blocking on cache
1386 m
= vm_page_alloc(object
, mreq
->pindex
+ i
,
1395 vm_page_unqueue_nowakeup(m
);
1401 vm_page_flag_set(marray
[i
- 1], PG_RAM
);
1404 * If mreq is the requested page and we have nothing to do return
1405 * VM_PAGER_FAIL. If raonly is set mreq is just another read-ahead
1406 * page and must be cleaned up.
1408 if (blk
== SWAPBLK_NONE
) {
1411 vnode_pager_freepage(mreq
);
1412 vm_object_drop(object
);
1413 return(VM_PAGER_OK
);
1415 vm_object_drop(object
);
1416 return(VM_PAGER_FAIL
);
1421 * Map our page(s) into kva for input
1423 * Use the KVABIO API to avoid synchronizing the pmap.
1425 bp
= getpbuf_kva(&nsw_rcount
);
1427 kva
= (vm_offset_t
) bp
->b_kvabase
;
1428 bcopy(marray
, bp
->b_xio
.xio_pages
, i
* sizeof(vm_page_t
));
1429 pmap_qenter_noinval(kva
, bp
->b_xio
.xio_pages
, i
);
1431 bp
->b_data
= (caddr_t
)kva
;
1432 bp
->b_bcount
= PAGE_SIZE
* i
;
1433 bp
->b_xio
.xio_npages
= i
;
1434 bp
->b_flags
|= B_KVABIO
;
1435 bio
->bio_done
= swp_pager_async_iodone
;
1436 bio
->bio_offset
= (off_t
)blk
<< PAGE_SHIFT
;
1437 bio
->bio_caller_info1
.index
= SWBIO_READ
;
1440 * Set index. If raonly set the index beyond the array so all
1441 * the pages are treated the same, otherwise the original mreq is
1445 bio
->bio_driver_info
= (void *)(intptr_t)i
;
1447 bio
->bio_driver_info
= (void *)(intptr_t)0;
1449 for (j
= 0; j
< i
; ++j
) {
1450 atomic_set_int(&bp
->b_xio
.xio_pages
[j
]->busy_count
,
1454 mycpu
->gd_cnt
.v_swapin
++;
1455 mycpu
->gd_cnt
.v_swappgsin
+= bp
->b_xio
.xio_npages
;
1458 * We still hold the lock on mreq, and our automatic completion routine
1459 * does not remove it.
1461 vm_object_pip_add(object
, bp
->b_xio
.xio_npages
);
1464 * perform the I/O. NOTE!!! bp cannot be considered valid after
1465 * this point because we automatically release it on completion.
1466 * Instead, we look at the one page we are interested in which we
1467 * still hold a lock on even through the I/O completion.
1469 * The other pages in our m[] array are also released on completion,
1470 * so we cannot assume they are valid anymore either.
1472 bp
->b_cmd
= BUF_CMD_READ
;
1474 vn_strategy(swapdev_vp
, bio
);
1477 * Wait for the page we want to complete. PBUSY_SWAPINPROG is always
1478 * cleared on completion. If an I/O error occurs, SWAPBLK_NONE
1479 * is set in the meta-data.
1481 * If this is a read-ahead only we return immediately without
1485 vm_object_drop(object
);
1486 return(VM_PAGER_OK
);
1490 * Read-ahead includes originally requested page case.
1493 busy_count
= mreq
->busy_count
;
1495 if ((busy_count
& PBUSY_SWAPINPROG
) == 0)
1497 tsleep_interlock(mreq
, 0);
1498 if (!atomic_cmpset_int(&mreq
->busy_count
, busy_count
,
1500 PBUSY_SWAPINPROG
| PBUSY_WANTED
)) {
1503 atomic_set_int(&mreq
->flags
, PG_REFERENCED
);
1504 mycpu
->gd_cnt
.v_intrans
++;
1505 if (tsleep(mreq
, PINTERLOCKED
, "swread", hz
*20)) {
1507 "swap_pager: indefinite wait buffer: "
1508 " bp %p offset: %lld, size: %ld\n",
1510 (long long)bio
->bio_offset
,
1517 * Disallow speculative reads prior to the SWAPINPROG test.
1522 * mreq is left busied after completion, but all the other pages
1523 * are freed. If we had an unrecoverable read error the page will
1526 vm_object_drop(object
);
1527 if (mreq
->valid
!= VM_PAGE_BITS_ALL
)
1528 return(VM_PAGER_ERROR
);
1530 return(VM_PAGER_OK
);
1533 * A final note: in a low swap situation, we cannot deallocate swap
1534 * and mark a page dirty here because the caller is likely to mark
1535 * the page clean when we return, causing the page to possibly revert
1536 * to all-zero's later.
1541 * swap_pager_putpages:
1543 * Assign swap (if necessary) and initiate I/O on the specified pages.
1545 * We support both OBJT_DEFAULT and OBJT_SWAP objects. DEFAULT objects
1546 * are automatically converted to SWAP objects.
1548 * In a low memory situation we may block in vn_strategy(), but the new
1549 * vm_page reservation system coupled with properly written VFS devices
1550 * should ensure that no low-memory deadlock occurs. This is an area
1553 * The parent has N vm_object_pip_add() references prior to
1554 * calling us and will remove references for rtvals[] that are
1555 * not set to VM_PAGER_PEND. We need to remove the rest on I/O
1558 * The parent has soft-busy'd the pages it passes us and will unbusy
1559 * those whos rtvals[] entry is not set to VM_PAGER_PEND on return.
1560 * We need to unbusy the rest on I/O completion.
1565 swap_pager_putpages(vm_object_t object
, vm_page_t
*m
, int count
,
1566 int flags
, int *rtvals
)
1571 vm_object_hold(object
);
1573 if (count
&& m
[0]->object
!= object
) {
1574 panic("swap_pager_getpages: object mismatch %p/%p",
1583 * Turn object into OBJT_SWAP
1584 * Check for bogus sysops
1586 * Force sync if not pageout process, we don't want any single
1587 * non-pageout process to be able to hog the I/O subsystem! This
1588 * can be overridden by setting.
1590 if (object
->type
== OBJT_DEFAULT
) {
1591 if (object
->type
== OBJT_DEFAULT
)
1592 swp_pager_meta_convert(object
);
1596 * Normally we force synchronous swap I/O if this is not the
1597 * pageout daemon to prevent any single user process limited
1598 * via RLIMIT_RSS from hogging swap write bandwidth.
1600 if (curthread
!= pagethread
&&
1601 curthread
!= emergpager
&&
1602 swap_user_async
== 0) {
1603 flags
|= VM_PAGER_PUT_SYNC
;
1609 * Update nsw parameters from swap_async_max sysctl values.
1610 * Do not let the sysop crash the machine with bogus numbers.
1612 if (swap_async_max
!= nsw_wcount_async_max
) {
1618 if ((n
= swap_async_max
) > nswbuf_kva
/ 2)
1625 * Adjust difference ( if possible ). If the current async
1626 * count is too low, we may not be able to make the adjustment
1629 * vm_token needed for nsw_wcount sleep interlock
1631 lwkt_gettoken(&vm_token
);
1632 n
-= nsw_wcount_async_max
;
1633 if (nsw_wcount_async
+ n
>= 0) {
1634 nsw_wcount_async_max
+= n
;
1635 pbuf_adjcount(&nsw_wcount_async
, n
);
1637 lwkt_reltoken(&vm_token
);
1643 * Assign swap blocks and issue I/O. We reallocate swap on the fly.
1644 * The page is left dirty until the pageout operation completes
1648 for (i
= 0; i
< count
; i
+= n
) {
1655 * Maximum I/O size is limited by a number of factors.
1658 n
= min(BLIST_MAX_ALLOC
, count
- i
);
1659 n
= min(n
, nsw_cluster_max
);
1661 lwkt_gettoken(&vm_token
);
1664 * Get biggest block of swap we can. If we fail, fall
1665 * back and try to allocate a smaller block. Don't go
1666 * overboard trying to allocate space if it would overly
1670 (blk
= swp_pager_getswapspace(object
, n
)) == SWAPBLK_NONE
&&
1675 if (blk
== SWAPBLK_NONE
) {
1676 for (j
= 0; j
< n
; ++j
)
1677 rtvals
[i
+j
] = VM_PAGER_FAIL
;
1678 lwkt_reltoken(&vm_token
);
1681 if (vm_report_swap_allocs
> 0) {
1682 kprintf("swap_alloc %08jx,%d\n", (intmax_t)blk
, n
);
1683 --vm_report_swap_allocs
;
1687 * The I/O we are constructing cannot cross a physical
1688 * disk boundry in the swap stripe.
1690 if ((blk
^ (blk
+ n
)) & ~SWB_DMMASK
) {
1691 j
= ((blk
+ SWB_DMMAX
) & ~SWB_DMMASK
) - blk
;
1692 swp_pager_freeswapspace(object
, blk
+ j
, n
- j
);
1697 * All I/O parameters have been satisfied, build the I/O
1698 * request and assign the swap space.
1700 * Use the KVABIO API to avoid synchronizing the pmap.
1702 if ((flags
& VM_PAGER_PUT_SYNC
))
1703 bp
= getpbuf_kva(&nsw_wcount_sync
);
1705 bp
= getpbuf_kva(&nsw_wcount_async
);
1708 lwkt_reltoken(&vm_token
);
1710 pmap_qenter_noinval((vm_offset_t
)bp
->b_data
, &m
[i
], n
);
1712 bp
->b_flags
|= B_KVABIO
;
1713 bp
->b_bcount
= PAGE_SIZE
* n
;
1714 bio
->bio_offset
= (off_t
)blk
<< PAGE_SHIFT
;
1716 for (j
= 0; j
< n
; ++j
) {
1717 vm_page_t mreq
= m
[i
+j
];
1719 swp_pager_meta_build(mreq
->object
, mreq
->pindex
,
1721 if (object
->type
== OBJT_SWAP
)
1722 vm_page_dirty(mreq
);
1723 rtvals
[i
+j
] = VM_PAGER_OK
;
1725 atomic_set_int(&mreq
->busy_count
, PBUSY_SWAPINPROG
);
1726 bp
->b_xio
.xio_pages
[j
] = mreq
;
1728 bp
->b_xio
.xio_npages
= n
;
1730 mycpu
->gd_cnt
.v_swapout
++;
1731 mycpu
->gd_cnt
.v_swappgsout
+= bp
->b_xio
.xio_npages
;
1733 bp
->b_dirtyoff
= 0; /* req'd for NFS */
1734 bp
->b_dirtyend
= bp
->b_bcount
; /* req'd for NFS */
1735 bp
->b_cmd
= BUF_CMD_WRITE
;
1736 bio
->bio_caller_info1
.index
= SWBIO_WRITE
;
1741 if ((flags
& VM_PAGER_PUT_SYNC
) == 0) {
1742 bio
->bio_done
= swp_pager_async_iodone
;
1744 vn_strategy(swapdev_vp
, bio
);
1746 for (j
= 0; j
< n
; ++j
)
1747 rtvals
[i
+j
] = VM_PAGER_PEND
;
1752 * Issue synchrnously.
1754 * Wait for the sync I/O to complete, then update rtvals.
1755 * We just set the rtvals[] to VM_PAGER_PEND so we can call
1756 * our async completion routine at the end, thus avoiding a
1759 bio
->bio_caller_info1
.index
|= SWBIO_SYNC
;
1760 if (flags
& VM_PAGER_TRY_TO_CACHE
)
1761 bio
->bio_caller_info1
.index
|= SWBIO_TTC
;
1762 bio
->bio_done
= biodone_sync
;
1763 bio
->bio_flags
|= BIO_SYNC
;
1764 vn_strategy(swapdev_vp
, bio
);
1765 biowait(bio
, "swwrt");
1767 for (j
= 0; j
< n
; ++j
)
1768 rtvals
[i
+j
] = VM_PAGER_PEND
;
1771 * Now that we are through with the bp, we can call the
1772 * normal async completion, which frees everything up.
1774 swp_pager_async_iodone(bio
);
1776 vm_object_drop(object
);
1782 * Recalculate the low and high-water marks.
1785 swap_pager_newswap(void)
1788 * NOTE: vm_swap_max cannot exceed 1 billion blocks, which is the
1789 * limitation imposed by the blist code. Remember that this
1790 * will be divided by NSWAP_MAX (4), so each swap device is
1791 * limited to around a terrabyte.
1794 nswap_lowat
= (int64_t)vm_swap_max
* 4 / 100; /* 4% left */
1795 nswap_hiwat
= (int64_t)vm_swap_max
* 6 / 100; /* 6% left */
1796 kprintf("swap low/high-water marks set to %d/%d\n",
1797 nswap_lowat
, nswap_hiwat
);
1806 * swp_pager_async_iodone:
1808 * Completion routine for asynchronous reads and writes from/to swap.
1809 * Also called manually by synchronous code to finish up a bp.
1811 * For READ operations, the pages are BUSY'd. For WRITE operations,
1812 * the pages are vm_page_t->busy'd. For READ operations, we BUSY
1813 * unbusy all pages except the 'main' request page. For WRITE
1814 * operations, we vm_page_t->busy'd unbusy all pages ( we can do this
1815 * because we marked them all VM_PAGER_PEND on return from putpages ).
1817 * This routine may not block.
1822 swp_pager_async_iodone(struct bio
*bio
)
1824 struct buf
*bp
= bio
->bio_buf
;
1825 vm_object_t object
= NULL
;
1832 if (bp
->b_flags
& B_ERROR
) {
1834 "swap_pager: I/O error - %s failed; offset %lld,"
1835 "size %ld, error %d\n",
1836 ((bio
->bio_caller_info1
.index
& SWBIO_READ
) ?
1837 "pagein" : "pageout"),
1838 (long long)bio
->bio_offset
,
1847 if (bp
->b_xio
.xio_npages
)
1848 object
= bp
->b_xio
.xio_pages
[0]->object
;
1851 /* PMAP TESTING CODE (useful, keep it in but #if 0'd) */
1852 if (bio
->bio_caller_info1
.index
& SWBIO_WRITE
) {
1853 if (bio
->bio_crc
!= iscsi_crc32(bp
->b_data
, bp
->b_bcount
)) {
1854 kprintf("SWAPOUT: BADCRC %08x %08x\n",
1856 iscsi_crc32(bp
->b_data
, bp
->b_bcount
));
1857 for (i
= 0; i
< bp
->b_xio
.xio_npages
; ++i
) {
1858 vm_page_t m
= bp
->b_xio
.xio_pages
[i
];
1859 if (m
->flags
& PG_WRITEABLE
)
1861 "%d/%d %p writable\n",
1862 i
, bp
->b_xio
.xio_npages
, m
);
1869 * remove the mapping for kernel virtual
1871 pmap_qremove((vm_offset_t
)bp
->b_data
, bp
->b_xio
.xio_npages
);
1874 * cleanup pages. If an error occurs writing to swap, we are in
1875 * very serious trouble. If it happens to be a disk error, though,
1876 * we may be able to recover by reassigning the swap later on. So
1877 * in this case we remove the m->swapblk assignment for the page
1878 * but do not free it in the rlist. The errornous block(s) are thus
1879 * never reallocated as swap. Redirty the page and continue.
1881 for (i
= 0; i
< bp
->b_xio
.xio_npages
; ++i
) {
1882 vm_page_t m
= bp
->b_xio
.xio_pages
[i
];
1884 if (bp
->b_flags
& B_ERROR
) {
1886 * If an error occurs I'd love to throw the swapblk
1887 * away without freeing it back to swapspace, so it
1888 * can never be used again. But I can't from an
1892 if (bio
->bio_caller_info1
.index
& SWBIO_READ
) {
1894 * When reading, reqpage needs to stay
1895 * locked for the parent, but all other
1896 * pages can be freed. We still want to
1897 * wakeup the parent waiting on the page,
1898 * though. ( also: pg_reqpage can be -1 and
1899 * not match anything ).
1901 * We have to wake specifically requested pages
1902 * up too because we cleared SWAPINPROG and
1903 * someone may be waiting for that.
1905 * NOTE: For reads, m->dirty will probably
1906 * be overridden by the original caller
1907 * of getpages so don't play cute tricks
1910 * NOTE: We can't actually free the page from
1911 * here, because this is an interrupt.
1912 * It is not legal to mess with
1913 * object->memq from an interrupt.
1914 * Deactivate the page instead.
1916 * WARNING! The instant SWAPINPROG is
1917 * cleared another cpu may start
1918 * using the mreq page (it will
1919 * check m->valid immediately).
1923 atomic_clear_int(&m
->busy_count
,
1927 * bio_driver_info holds the requested page
1930 if (i
!= (int)(intptr_t)bio
->bio_driver_info
) {
1931 vm_page_deactivate(m
);
1937 * If i == bp->b_pager.pg_reqpage, do not wake
1938 * the page up. The caller needs to.
1942 * If a write error occurs remove the swap
1943 * assignment (note that PG_SWAPPED may or
1944 * may not be set depending on prior activity).
1946 * Re-dirty OBJT_SWAP pages as there is no
1947 * other backing store, we can't throw the
1950 * Non-OBJT_SWAP pages (aka swapcache) must
1951 * not be dirtied since they may not have
1952 * been dirty in the first place, and they
1953 * do have backing store (the vnode).
1955 vm_page_busy_wait(m
, FALSE
, "swadpg");
1956 vm_object_hold(m
->object
);
1957 swp_pager_meta_ctl(m
->object
, m
->pindex
,
1959 vm_page_flag_clear(m
, PG_SWAPPED
);
1960 vm_object_drop(m
->object
);
1961 if (m
->object
->type
== OBJT_SWAP
) {
1963 vm_page_activate(m
);
1965 vm_page_io_finish(m
);
1966 atomic_clear_int(&m
->busy_count
,
1970 } else if (bio
->bio_caller_info1
.index
& SWBIO_READ
) {
1972 * NOTE: for reads, m->dirty will probably be
1973 * overridden by the original caller of getpages so
1974 * we cannot set them in order to free the underlying
1975 * swap in a low-swap situation. I don't think we'd
1976 * want to do that anyway, but it was an optimization
1977 * that existed in the old swapper for a time before
1978 * it got ripped out due to precisely this problem.
1980 * If not the requested page then deactivate it.
1982 * Note that the requested page, reqpage, is left
1983 * busied, but we still have to wake it up. The
1984 * other pages are released (unbusied) by
1985 * vm_page_wakeup(). We do not set reqpage's
1986 * valid bits here, it is up to the caller.
1990 * NOTE: Can't call pmap_clear_modify(m) from an
1991 * interrupt thread, the pmap code may have to
1992 * map non-kernel pmaps and currently asserts
1995 * WARNING! The instant SWAPINPROG is
1996 * cleared another cpu may start
1997 * using the mreq page (it will
1998 * check m->valid immediately).
2000 /*pmap_clear_modify(m);*/
2001 m
->valid
= VM_PAGE_BITS_ALL
;
2003 vm_page_flag_set(m
, PG_SWAPPED
);
2004 atomic_clear_int(&m
->busy_count
, PBUSY_SWAPINPROG
);
2007 * We have to wake specifically requested pages
2008 * up too because we cleared SWAPINPROG and
2009 * could be waiting for it in getpages. However,
2010 * be sure to not unbusy getpages specifically
2011 * requested page - getpages expects it to be
2014 * bio_driver_info holds the requested page
2016 if (i
!= (int)(intptr_t)bio
->bio_driver_info
) {
2017 vm_page_deactivate(m
);
2024 * Mark the page clean but do not mess with the
2025 * pmap-layer's modified state. That state should
2026 * also be clear since the caller protected the
2027 * page VM_PROT_READ, but allow the case.
2029 * We are in an interrupt, avoid pmap operations.
2031 * If we have a severe page deficit, deactivate the
2032 * page. Do not try to cache it (which would also
2033 * involve a pmap op), because the page might still
2036 * When using the swap to cache clean vnode pages
2037 * we do not mess with the page dirty bits.
2039 * NOTE! Nobody is waiting for the key mreq page
2040 * on write completion.
2042 vm_page_busy_wait(m
, FALSE
, "swadpg");
2043 if (m
->object
->type
== OBJT_SWAP
)
2045 vm_page_flag_set(m
, PG_SWAPPED
);
2046 atomic_clear_int(&m
->busy_count
, PBUSY_SWAPINPROG
);
2047 if (vm_page_count_severe())
2048 vm_page_deactivate(m
);
2049 vm_page_io_finish(m
);
2050 if (bio
->bio_caller_info1
.index
& SWBIO_TTC
)
2051 vm_page_try_to_cache(m
);
2058 * adjust pip. NOTE: the original parent may still have its own
2059 * pip refs on the object.
2063 vm_object_pip_wakeup_n(object
, bp
->b_xio
.xio_npages
);
2066 * Release the physical I/O buffer.
2068 * NOTE: Due to synchronous operations in the write case b_cmd may
2069 * already be set to BUF_CMD_DONE and BIO_SYNC may have already
2072 * Use vm_token to interlock nsw_rcount/wcount wakeup?
2074 lwkt_gettoken(&vm_token
);
2075 if (bio
->bio_caller_info1
.index
& SWBIO_READ
)
2076 nswptr
= &nsw_rcount
;
2077 else if (bio
->bio_caller_info1
.index
& SWBIO_SYNC
)
2078 nswptr
= &nsw_wcount_sync
;
2080 nswptr
= &nsw_wcount_async
;
2081 bp
->b_cmd
= BUF_CMD_DONE
;
2082 relpbuf(bp
, nswptr
);
2083 lwkt_reltoken(&vm_token
);
2087 * Fault-in a potentially swapped page and remove the swap reference.
2088 * (used by swapoff code)
2090 * object must be held.
2092 static __inline
void
2093 swp_pager_fault_page(vm_object_t object
, int *sharedp
, vm_pindex_t pindex
)
2099 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2101 if (object
->type
== OBJT_VNODE
) {
2103 * Any swap related to a vnode is due to swapcache. We must
2104 * vget() the vnode in case it is not active (otherwise
2105 * vref() will panic). Calling vm_object_page_remove() will
2106 * ensure that any swap ref is removed interlocked with the
2107 * page. clean_only is set to TRUE so we don't throw away
2110 vp
= object
->handle
;
2111 error
= vget(vp
, LK_SHARED
| LK_RETRY
| LK_CANRECURSE
);
2113 vm_object_page_remove(object
, pindex
, pindex
+ 1, TRUE
);
2118 * Otherwise it is a normal OBJT_SWAP object and we can
2119 * fault the page in and remove the swap.
2121 m
= vm_fault_object_page(object
, IDX_TO_OFF(pindex
),
2123 VM_FAULT_DIRTY
| VM_FAULT_UNSWAP
,
2131 * This removes all swap blocks related to a particular device. We have
2132 * to be careful of ripups during the scan.
2134 static int swp_pager_swapoff_callback(struct swblock
*swap
, void *data
);
2137 swap_pager_swapoff(int devidx
)
2139 struct vm_object_hash
*hash
;
2140 struct swswapoffinfo info
;
2141 struct vm_object marker
;
2145 bzero(&marker
, sizeof(marker
));
2146 marker
.type
= OBJT_MARKER
;
2148 for (n
= 0; n
< VMOBJ_HSIZE
; ++n
) {
2149 hash
= &vm_object_hash
[n
];
2151 lwkt_gettoken(&hash
->token
);
2152 TAILQ_INSERT_HEAD(&hash
->list
, &marker
, object_list
);
2154 while ((object
= TAILQ_NEXT(&marker
, object_list
)) != NULL
) {
2155 if (object
->type
== OBJT_MARKER
)
2157 if (object
->type
!= OBJT_SWAP
&&
2158 object
->type
!= OBJT_VNODE
)
2160 vm_object_hold(object
);
2161 if (object
->type
!= OBJT_SWAP
&&
2162 object
->type
!= OBJT_VNODE
) {
2163 vm_object_drop(object
);
2168 * Object is special in that we can't just pagein
2169 * into vm_page's in it (tmpfs, vn).
2171 if ((object
->flags
& OBJ_NOPAGEIN
) &&
2172 RB_ROOT(&object
->swblock_root
)) {
2173 vm_object_drop(object
);
2177 info
.object
= object
;
2179 info
.devidx
= devidx
;
2180 swblock_rb_tree_RB_SCAN(&object
->swblock_root
,
2181 NULL
, swp_pager_swapoff_callback
,
2183 vm_object_drop(object
);
2185 if (object
== TAILQ_NEXT(&marker
, object_list
)) {
2186 TAILQ_REMOVE(&hash
->list
, &marker
, object_list
);
2187 TAILQ_INSERT_AFTER(&hash
->list
, object
,
2188 &marker
, object_list
);
2191 TAILQ_REMOVE(&hash
->list
, &marker
, object_list
);
2192 lwkt_reltoken(&hash
->token
);
2196 * If we fail to locate all swblocks we just fail gracefully and
2197 * do not bother to restore paging on the swap device. If the
2198 * user wants to retry the user can retry.
2200 if (swdevt
[devidx
].sw_nused
)
2208 swp_pager_swapoff_callback(struct swblock
*swap
, void *data
)
2210 struct swswapoffinfo
*info
= data
;
2211 vm_object_t object
= info
->object
;
2216 index
= swap
->swb_index
;
2217 for (i
= 0; i
< SWAP_META_PAGES
; ++i
) {
2219 * Make sure we don't race a dying object. This will
2220 * kill the scan of the object's swap blocks entirely.
2222 if (object
->flags
& OBJ_DEAD
)
2226 * Fault the page, which can obviously block. If the swap
2227 * structure disappears break out.
2229 v
= swap
->swb_pages
[i
];
2230 if (v
!= SWAPBLK_NONE
&& BLK2DEVIDX(v
) == info
->devidx
) {
2231 swp_pager_fault_page(object
, &info
->shared
,
2232 swap
->swb_index
+ i
);
2233 /* swap ptr might go away */
2234 if (RB_LOOKUP(swblock_rb_tree
,
2235 &object
->swblock_root
, index
) != swap
) {
2243 /************************************************************************
2245 ************************************************************************
2247 * These routines manipulate the swap metadata stored in the
2250 * Swap metadata is implemented with a global hash and not directly
2251 * linked into the object. Instead the object simply contains
2252 * appropriate tracking counters.
2256 * Lookup the swblock containing the specified swap block index.
2258 * The caller must hold the object.
2262 swp_pager_lookup(vm_object_t object
, vm_pindex_t index
)
2264 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2265 index
&= ~(vm_pindex_t
)SWAP_META_MASK
;
2266 return (RB_LOOKUP(swblock_rb_tree
, &object
->swblock_root
, index
));
2270 * Remove a swblock from the RB tree.
2272 * The caller must hold the object.
2276 swp_pager_remove(vm_object_t object
, struct swblock
*swap
)
2278 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2279 RB_REMOVE(swblock_rb_tree
, &object
->swblock_root
, swap
);
2283 * Convert default object to swap object if necessary
2285 * The caller must hold the object.
2288 swp_pager_meta_convert(vm_object_t object
)
2290 if (object
->type
== OBJT_DEFAULT
) {
2291 object
->type
= OBJT_SWAP
;
2292 KKASSERT(object
->swblock_count
== 0);
2297 * SWP_PAGER_META_BUILD() - add swap block to swap meta data for object
2299 * We first convert the object to a swap object if it is a default
2300 * object. Vnode objects do not need to be converted.
2302 * The specified swapblk is added to the object's swap metadata. If
2303 * the swapblk is not valid, it is freed instead. Any previously
2304 * assigned swapblk is freed.
2306 * The caller must hold the object.
2309 swp_pager_meta_build(vm_object_t object
, vm_pindex_t index
, swblk_t swapblk
)
2311 struct swblock
*swap
;
2312 struct swblock
*oswap
;
2315 KKASSERT(swapblk
!= SWAPBLK_NONE
);
2316 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2319 * Convert object if necessary
2321 if (object
->type
== OBJT_DEFAULT
)
2322 swp_pager_meta_convert(object
);
2325 * Locate swblock. If not found create, but if we aren't adding
2326 * anything just return. If we run out of space in the map we wait
2327 * and, since the hash table may have changed, retry.
2330 swap
= swp_pager_lookup(object
, index
);
2335 swap
= zalloc(swap_zone
);
2340 swap
->swb_index
= index
& ~(vm_pindex_t
)SWAP_META_MASK
;
2341 swap
->swb_count
= 0;
2343 ++object
->swblock_count
;
2345 for (i
= 0; i
< SWAP_META_PAGES
; ++i
)
2346 swap
->swb_pages
[i
] = SWAPBLK_NONE
;
2347 oswap
= RB_INSERT(swblock_rb_tree
, &object
->swblock_root
, swap
);
2348 KKASSERT(oswap
== NULL
);
2352 * Delete prior contents of metadata.
2354 * NOTE: Decrement swb_count after the freeing operation (which
2355 * might block) to prevent racing destruction of the swblock.
2357 index
&= SWAP_META_MASK
;
2359 while ((v
= swap
->swb_pages
[index
]) != SWAPBLK_NONE
) {
2360 swap
->swb_pages
[index
] = SWAPBLK_NONE
;
2362 swp_pager_freeswapspace(object
, v
, 1);
2364 --mycpu
->gd_vmtotal
.t_vm
;
2368 * Enter block into metadata
2370 swap
->swb_pages
[index
] = swapblk
;
2371 if (swapblk
!= SWAPBLK_NONE
) {
2373 ++mycpu
->gd_vmtotal
.t_vm
;
2378 * SWP_PAGER_META_FREE() - free a range of blocks in the object's swap metadata
2380 * The requested range of blocks is freed, with any associated swap
2381 * returned to the swap bitmap.
2383 * This routine will free swap metadata structures as they are cleaned
2384 * out. This routine does *NOT* operate on swap metadata associated
2385 * with resident pages.
2387 * The caller must hold the object.
2389 static int swp_pager_meta_free_callback(struct swblock
*swb
, void *data
);
2392 swp_pager_meta_free(vm_object_t object
, vm_pindex_t index
, vm_pindex_t count
)
2394 struct swfreeinfo info
;
2396 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2401 if (object
->swblock_count
== 0) {
2402 KKASSERT(RB_EMPTY(&object
->swblock_root
));
2409 * Setup for RB tree scan. Note that the pindex range can be huge
2410 * due to the 64 bit page index space so we cannot safely iterate.
2412 info
.object
= object
;
2413 info
.basei
= index
& ~(vm_pindex_t
)SWAP_META_MASK
;
2415 info
.endi
= index
+ count
- 1;
2416 swblock_rb_tree_RB_SCAN(&object
->swblock_root
, rb_swblock_scancmp
,
2417 swp_pager_meta_free_callback
, &info
);
2421 * The caller must hold the object.
2425 swp_pager_meta_free_callback(struct swblock
*swap
, void *data
)
2427 struct swfreeinfo
*info
= data
;
2428 vm_object_t object
= info
->object
;
2433 * Figure out the range within the swblock. The wider scan may
2434 * return edge-case swap blocks when the start and/or end points
2435 * are in the middle of a block.
2437 if (swap
->swb_index
< info
->begi
)
2438 index
= (int)info
->begi
& SWAP_META_MASK
;
2442 if (swap
->swb_index
+ SWAP_META_PAGES
> info
->endi
)
2443 eindex
= (int)info
->endi
& SWAP_META_MASK
;
2445 eindex
= SWAP_META_MASK
;
2448 * Scan and free the blocks. The loop terminates early
2449 * if (swap) runs out of blocks and could be freed.
2451 * NOTE: Decrement swb_count after swp_pager_freeswapspace()
2452 * to deal with a zfree race.
2454 while (index
<= eindex
) {
2455 swblk_t v
= swap
->swb_pages
[index
];
2457 if (v
!= SWAPBLK_NONE
) {
2458 swap
->swb_pages
[index
] = SWAPBLK_NONE
;
2460 swp_pager_freeswapspace(object
, v
, 1);
2461 --mycpu
->gd_vmtotal
.t_vm
;
2462 if (--swap
->swb_count
== 0) {
2463 swp_pager_remove(object
, swap
);
2464 zfree(swap_zone
, swap
);
2465 --object
->swblock_count
;
2472 /* swap may be invalid here due to zfree above */
2479 * SWP_PAGER_META_FREE_ALL() - destroy all swap metadata associated with object
2481 * This routine locates and destroys all swap metadata associated with
2484 * NOTE: Decrement swb_count after the freeing operation (which
2485 * might block) to prevent racing destruction of the swblock.
2487 * The caller must hold the object.
2490 swp_pager_meta_free_all(vm_object_t object
)
2492 struct swblock
*swap
;
2495 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2497 while ((swap
= RB_ROOT(&object
->swblock_root
)) != NULL
) {
2498 swp_pager_remove(object
, swap
);
2499 for (i
= 0; i
< SWAP_META_PAGES
; ++i
) {
2500 swblk_t v
= swap
->swb_pages
[i
];
2501 if (v
!= SWAPBLK_NONE
) {
2503 swp_pager_freeswapspace(object
, v
, 1);
2505 --mycpu
->gd_vmtotal
.t_vm
;
2508 if (swap
->swb_count
!= 0)
2509 panic("swap_pager_meta_free_all: swb_count != 0");
2510 zfree(swap_zone
, swap
);
2511 --object
->swblock_count
;
2514 KKASSERT(object
->swblock_count
== 0);
2518 * SWP_PAGER_METACTL() - misc control of swap and vm_page_t meta data.
2520 * This routine is capable of looking up, popping, or freeing
2521 * swapblk assignments in the swap meta data or in the vm_page_t.
2522 * The routine typically returns the swapblk being looked-up, or popped,
2523 * or SWAPBLK_NONE if the block was freed, or SWAPBLK_NONE if the block
2524 * was invalid. This routine will automatically free any invalid
2525 * meta-data swapblks.
2527 * It is not possible to store invalid swapblks in the swap meta data
2528 * (other then a literal 'SWAPBLK_NONE'), so we don't bother checking.
2530 * When acting on a busy resident page and paging is in progress, we
2531 * have to wait until paging is complete but otherwise can act on the
2534 * SWM_FREE remove and free swap block from metadata
2535 * SWM_POP remove from meta data but do not free.. pop it out
2537 * The caller must hold the object.
2540 swp_pager_meta_ctl(vm_object_t object
, vm_pindex_t index
, int flags
)
2542 struct swblock
*swap
;
2545 if (object
->swblock_count
== 0)
2546 return(SWAPBLK_NONE
);
2549 swap
= swp_pager_lookup(object
, index
);
2552 index
&= SWAP_META_MASK
;
2553 r1
= swap
->swb_pages
[index
];
2555 if (r1
!= SWAPBLK_NONE
) {
2556 if (flags
& (SWM_FREE
|SWM_POP
)) {
2557 swap
->swb_pages
[index
] = SWAPBLK_NONE
;
2558 --mycpu
->gd_vmtotal
.t_vm
;
2559 if (--swap
->swb_count
== 0) {
2560 swp_pager_remove(object
, swap
);
2561 zfree(swap_zone
, swap
);
2562 --object
->swblock_count
;
2565 /* swap ptr may be invalid */
2566 if (flags
& SWM_FREE
) {
2567 swp_pager_freeswapspace(object
, r1
, 1);
2571 /* swap ptr may be invalid */