2 # LINT -- config file for checking all the sources, tries to pull in
3 # as much of the source tree as it can.
5 # $FreeBSD: src/sys/i386/conf/LINT,v 1.749.2.144 2003/06/04 17:56:59 sam Exp $
6 # $DragonFly: src/sys/config/LINT,v 1.177 2008/11/17 11:55:20 swildner Exp $
8 # See the kernconf(5) manual page for more information on the format of
11 # NB: You probably don't want to try running a kernel built from this
12 # file. Instead, you should start from GENERIC, and add options from
13 # this file as required.
16 # These directives are mandatory. The machine directive specifies the
17 # platform and the machine_arch directive specifies the cpu architecture.
24 # This is the ``identification'' of the kernel. Usually this should
25 # be the same as the name of your kernel.
30 # The `maxusers' parameter controls the static sizing of a number of
31 # internal system tables by a formula defined in subr_param.c. Setting
32 # maxusers to 0 will cause the system to auto-size based on physical
38 # The `makeoptions' parameter allows variables to be passed to the
39 # generated Makefile in the build area.
41 # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
42 # after most other flags. Here we use it to inhibit use of non-optimal
43 # gcc builtin functions (e.g., memcmp).
45 # DEBUG happens to be magic.
46 # The following is equivalent to 'config -g KERNELNAME' and creates
47 # 'kernel.debug' compiled with -g debugging as well as a normal
48 # 'kernel'. Use 'make install.debug' to install the debug kernel
49 # but that isn't normally necessary as the debug symbols are not loaded
50 # by the kernel and are not useful there anyway.
52 # KERNEL can be overridden so that you can change the default name of your
55 # MODULES_OVERRIDE can be used to limit modules built to a specific list.
57 # INSTALLSTRIPPED can be set to cause installkernel to install stripped
58 # kernels and modules rather than a kernel and modules with debug symbols.
60 # INSTALLSTRIPPEDMODULES can be set to allow a full debug kernel to be
61 # installed, but to strip the installed modules.
63 makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
64 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
65 #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
66 # Only build Linux API modules and plus those parts of the sound system I need.
67 #makeoptions MODULES_OVERRIDE="linux sound/snd sound/pcm sound/driver/maestro3"
68 #makeoptions INSTALLSTRIPPED=1
69 #makeoptions INSTALLSTRIPPEDMODULES=1
72 # Certain applications can grow to be larger than the 128M limit
73 # that DragonFly initially imposes. Below are some options to
74 # allow that limit to grow to 256MB, and can be increased further
75 # with changing the parameters. MAXDSIZ is the maximum that the
76 # limit can be set to, and the DFLDSIZ is the default value for
77 # the limit. MAXSSIZ is the maximum that the stack limit can be
78 # set to. You might want to set the default lower than the max,
79 # and explicitly set the maximum with a shell command for processes
80 # that regularly exceed the limit like INND.
82 options MAXDSIZ="(256*1024*1024)"
83 options MAXSSIZ="(256*1024*1024)"
84 options DFLDSIZ="(256*1024*1024)"
87 # BLKDEV_IOSIZE sets the default block size used in user block
88 # device I/O. Note that this value will be overridden by the label
89 # when specifying a block device from a label with a non-0
90 # partition blocksize. The default is PAGE_SIZE.
92 options BLKDEV_IOSIZE=8192
94 # Options for the VM subsystem.
95 options PQ_CACHESIZE=512 # color for 512k/16k cache
97 # This allows you to actually store this configuration file into
98 # the kernel binary itself, where it may be later read by saying:
99 # strings -n 3 /kernel | sed -n 's/^___//p' > MYKERNEL
101 options INCLUDE_CONFIG_FILE # Include this file in kernel
104 # The root device and filesystem type can be compiled in;
105 # this provides a fallback option if the root device cannot
106 # be correctly guessed by the bootstrap code, or an override if
107 # the RB_DFLTROOT flag (-r) is specified when booting the kernel.
109 options ROOTDEVNAME=\"ufs:da0s2e\"
112 #####################################################################
115 # SMP enables building of a Symmetric MultiProcessor Kernel.
116 # APIC_IO enables the use of the IO APIC for Symmetric I/O.
120 # An SMP kernel will ONLY run on an Intel MP spec. qualified motherboard.
122 # Be sure to disable 'cpu I486_CPU' for SMP kernels.
124 # Check the 'Rogue SMP hardware' section to see if additional options
125 # are required by your hardware.
128 # To make an SMP kernel both SMP and APIC_IO are usually
129 # specified. SMP boxes with severely broken BIOSes which
130 # boot fine for non-SMP builds *might* work in SMP mode
131 # if you define SMP and leave APIC_IO turned off.
133 options SMP # Symmetric MultiProcessor Kernel
134 options APIC_IO # Symmetric (APIC) I/O
137 # Rogue SMP hardware:
142 # The MP tables of most of the current generation MP motherboards
143 # do NOT properly support bridged PCI cards. To use one of these
144 # cards you should refer to ???
147 #####################################################################
151 # You must specify at least one CPU (the one you intend to run on);
152 # deleting the specification for CPUs you don't need to use may make
153 # parts of the system run faster.
156 cpu I586_CPU # aka Pentium(tm)
157 cpu I686_CPU # aka Pentium Pro(tm)
160 # Options for CPU features.
162 # CPU_AMD64X2_INTR_SPAM tries to route HyperTransport EXTINT and NMI
163 # messages to LINT0 on the local APIC when the BIOS has forgotten to
164 # do that. If this is not done on a multi-core cpu, EXTINT and NMI
165 # get routed to the INTR/NMI pins on *BOTH* cores simultaneously, causing
166 # two INTA ack cycles one of which will almost certainly result in a
167 # spurious interrupt vector being presented. This is often visible as
168 # an unmaskable IRQ 7 which occurs for every normal interrupt that occurs
171 # CPU_ATHLON_SSE_HACK tries to enable SSE instructions when the BIOS has
172 # forgotten to enable them.
174 # CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM
175 # BlueLightning CPU. It works only with Cyrix FPU, and this option
176 # should not be used with Intel FPU.
178 # CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning
179 # CPU if CPU supports it. The default is double-clock mode on
180 # BlueLightning CPU box.
182 # CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1).
184 # CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct
185 # mapped mode. Default is 2-way set associative mode.
187 # CPU_CYRIX_NO_LOCK enables weak locking for the entire address space
188 # of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1.
189 # Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3)
191 # CPU_DISABLE_5X86_LSSER disables load store serialize (i.e. enables
192 # reorder). This option should not be used if you use memory mapped
195 # CPU_DISABLE_SSE disables SSE/MMX2 instructions support.
197 # CPU_ENABLE_TCC enables Thermal Control Circuitry (TCC) found in some
198 # Pentium(tm) 4 and (possibly) later CPUs. When enabled and detected,
199 # TCC supports restricting power consumption using the hw.p4tcc.*
200 # sysctls. This operates independently of SpeedStep and is useful on
201 # systems where other mechanisms such as apm(4) or acpi(4) don't work.
203 # CPU_ENABLE_EST enables support for Enhanced SpeedStep technology
204 # found in Pentium(tm) M processors.
206 # CPU_FASTER_5X86_FPU enables faster FPU exception handler.
208 # CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products
211 # CPU_IORT defines I/O clock delay time (NOTE 1). Default values of
212 # I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively
215 # CPU_L2_LATENCY specified the L2 cache latency value. This option is used
216 # only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected.
217 # The default value is 5.
219 # CPU_ELAN enables support for AMDs ElanSC520 CPU.
221 # CPU_LOOP_EN prevents flushing the prefetch buffer if the destination
222 # of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE
225 # CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option
226 # is useful when you use Socket 8 to Socket 370 converter, because most Pentium
227 # Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs.
229 # CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1).
231 # CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU
232 # enters suspend mode following execution of HALT instruction.
234 # CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD
237 # CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache
238 # flush at hold state.
240 # CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs
241 # without cache flush at hold state, and (2) write-back CPU cache on
242 # Cyrix 6x86 whose revision < 2.7 (NOTE 2).
244 # NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY
245 # Pentiums) from locking up when a LOCK CMPXCHG8B instruction is
246 # executed. This option is only needed if I586_CPU is also defined,
247 # and should be included for any non-Pentium CPU that defines it.
249 # NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors
250 # which indicates that the 15-16MB range is *definitely* not being
251 # occupied by an ISA memory hole.
253 # NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT,
254 # CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs.
255 # These options may crash your system.
257 # NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled
258 # in write-through mode when revision < 2.7. If revision of Cyrix
259 # 6x86 >= 2.7, CPU cache is always enabled in write-back mode.
261 # NOTE 3: This option may cause failures for software that requires
262 # locked cycles in order to operate correctly.
264 options CPU_AMD64X2_INTR_SPAM
265 options CPU_ATHLON_SSE_HACK
266 options CPU_BLUELIGHTNING_FPU_OP_CACHE
267 options CPU_BLUELIGHTNING_3X
269 options CPU_CYRIX_NO_LOCK
270 options CPU_DIRECT_MAPPED_CACHE
271 options CPU_DISABLE_5X86_LSSER
272 options CPU_DISABLE_SSE
274 options CPU_ENABLE_EST
275 options CPU_ENABLE_TCC
276 options CPU_FASTER_5X86_FPU
277 options CPU_I486_ON_386
279 options CPU_L2_LATENCY=5
281 options CPU_PPRO2CELERON
285 options CYRIX_CACHE_WORKS
286 options CYRIX_CACHE_REALLY_WORKS
287 #options NO_F00F_HACK
288 options NO_MEMORY_HOLE
291 # A math emulator is mandatory if you wish to run on hardware which
292 # does not have a floating-point processor.
293 options MATH_EMULATE #Support for x87 emulation
295 #####################################################################
296 # COMPATIBILITY OPTIONS
299 # Implement system calls compatible with 4.3BSD and older versions of
300 # FreeBSD. You probably do NOT want to remove this as much current code
301 # still relies on the 4.3 emulation.
306 # Implement system calls compatible with DragonFly 1.2 and older.
308 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
311 # These three options provide support for System V Interface
312 # Definition-style interprocess communication, in the form of shared
313 # memory, semaphores, and message queues, respectively.
315 # System V shared memory and tunable parameters
316 options SYSVSHM # include support for shared memory
317 options SHMMAXPGS=1025 # max amount of shared memory pages (4k on i386)
318 options SHMALL=1025 # max amount of shared memory (bytes)
319 options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
320 # max shared memory segment size (bytes)
321 options SHMMIN=2 # min shared memory segment size (bytes)
322 options SHMMNI=33 # max number of shared memory identifiers
323 options SHMSEG=9 # max shared memory segments per process
325 # System V semaphores and tunable parameters
326 options SYSVSEM # include support for semaphores
327 options SEMMAP=31 # amount of entries in semaphore map
328 options SEMMNI=11 # number of semaphore identifiers in the system
329 options SEMMNS=61 # number of semaphores in the system
330 options SEMMNU=31 # number of undo structures in the system
331 options SEMMSL=61 # max number of semaphores per id
332 options SEMOPM=101 # max number of operations per semop call
333 options SEMUME=11 # max number of undo entries per process
335 # System V message queues and tunable parameters
336 options SYSVMSG # include support for message queues
337 options MSGMNB=2049 # max characters per message queue
338 options MSGMNI=41 # max number of message queue identifiers
339 options MSGSEG=2049 # max number of message segments in the system
340 options MSGSSZ=16 # size of a message segment MUST be power of 2
341 options MSGTQL=41 # max amount of messages in the system
344 #####################################################################
348 # Enable the kernel debugger.
353 # Print a stack trace on kernel panic.
358 # Don't drop into DDB for a panic. Intended for unattended operation
359 # where you may want to drop to DDB from the console, but still want
360 # the machine to recover from a panic
362 options DDB_UNATTENDED
365 # If using GDB remote mode to debug the kernel, there's a non-standard
366 # extension to the remote protocol that can be used to use the serial
367 # port as both the debugging port and the system console. It's non-
368 # standard and you're on your own if you enable it. See also the
369 # "remotechat" variables in the DragonFly specific version of gdb.
371 options GDB_REMOTE_CHAT
374 # KTRACE enables the system-call tracing facility ktrace(2).
376 options KTRACE #kernel tracing
379 # The INVARIANTS option is used in a number of source files to enable
380 # extra sanity checking of internal structures. This support is not
381 # enabled by default because of the extra time it would take to check
382 # for these conditions, which can only occur as a result of
383 # programming errors.
388 # The DIAGNOSTIC option is used to enable extra debugging information
389 # from some parts of the kernel. As this makes everything more noisy,
390 # it is disabled by default.
395 # PERFMON causes the driver for Pentium/Pentium Pro performance counters
396 # to be compiled. See perfmon(4) for more information.
402 # This option let some drivers co-exist that can't co-exist in a running
403 # system. This is used to be able to compile all kernel code in one go for
404 # quality assurance purposes (like this file, which the option takes it name
407 options COMPILING_LINT
410 # XXX - this doesn't belong here.
411 # Allow ordinary users to take the console - this is useful for X.
414 # XXX - this doesn't belong here either
415 options USERCONFIG #boot -c editor
416 options INTRO_USERCONFIG #imply -c and show intro screen
417 options VISUAL_USERCONFIG #visual boot -c editor
420 #####################################################################
425 # Only the INET (Internet) family is officially supported in DragonFly.
426 # Source code for the NS (Xerox Network Service) is provided for amusement
429 options INET #Internet communications protocols
430 options INET6 #IPv6 communications protocols
431 options IPSEC #IP security
432 options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
433 options IPSEC_DEBUG #debug for IP security
435 # Set IPSEC_FILTERGIF to force packets coming through a gif tunnel
436 # to be processed by any configured packet filtering (ipfw, ipf).
437 # The default is that packets coming from a tunnel are _not_ processed;
438 # they are assumed trusted.
440 # Note that enabling this can be problematic as there are no mechanisms
441 # in place for distinguishing packets coming out of a tunnel (e.g. no
442 # encX devices as found on openbsd).
444 #options IPSEC_FILTERGIF #filter ipsec packets from a tunnel
447 # Experimental IPsec implementation that uses the kernel crypto
448 # framework. This cannot be configured together with IPSEC and
449 # (currently) supports only IPv4. To use this you must also
450 # configure the crypto device (see below). Note that with this
451 # you get all the IPsec protocols (e.g. there is no FAST_IPSEC_ESP).
452 # IPSEC_DEBUG is used, as above, to configure debugging support
453 # within the IPsec protocols.
455 #options FAST_IPSEC #new IPsec
457 options IPX #IPX/SPX communications protocols
458 options IPXIP #IPX in IP encapsulation (not available)
459 options IPTUNNEL #IP in IPX encapsulation (not available)
461 options NCP #NetWare Core protocol
463 options MPLS #Multi-Protocol Label Switching
465 options NETATALK #Appletalk communications protocols
467 # These are currently broken but are shipped due to interest.
468 #options NS #Xerox NS protocols
469 #options NSIP #XNS over IP
473 # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
475 # NETSMBCRYPTO enables support for encrypted passwords.
476 options NETSMB #SMB/CIFS requester
477 options NETSMBCRYPTO #encrypted password support for SMB
479 # mchain library. It can be either loaded as KLD or compiled into kernel
480 options LIBMCHAIN #mbuf management library
482 # netgraph(4). Enable the base netgraph code with the NETGRAPH option.
483 # Individual node types can be enabled with the corresponding option
484 # listed below; however, this is not strictly necessary as netgraph
485 # will automatically load the corresponding KLD module if the node type
486 # is not already compiled into the kernel. Each type below has a
487 # corresponding man page, e.g., ng_async(4).
488 options NETGRAPH #netgraph(4) system
489 options NETGRAPH_ASYNC
491 options NETGRAPH_BRIDGE
492 options NETGRAPH_CISCO
493 options NETGRAPH_ECHO
494 options NETGRAPH_EIFACE
495 options NETGRAPH_ETHER
496 options NETGRAPH_FRAME_RELAY
497 options NETGRAPH_HOLE
498 options NETGRAPH_IFACE
499 options NETGRAPH_KSOCKET
500 options NETGRAPH_L2TP
502 # MPPC compression requires proprietary files (not included)
503 #options NETGRAPH_MPPC_COMPRESSION
504 options NETGRAPH_MPPC_ENCRYPTION
505 options NETGRAPH_ONE2MANY
507 options NETGRAPH_PPPOE
508 options NETGRAPH_PPTPGRE
509 options NETGRAPH_RFC1490
510 options NETGRAPH_SOCKET
516 device mn # Munich32x/Falc54 Nx64kbit/sec cards.
519 # Network interfaces:
520 # The `loop' pseudo-device is MANDATORY when networking is enabled.
521 # The `ether' pseudo-device provides generic code to handle
522 # Ethernets; it is MANDATORY when a Ethernet device driver is
524 # The `sppp' pseudo-device serves a similar role for certain types
525 # of synchronous PPP links (like `ar').
526 # The `sl' pseudo-device implements the Serial Line IP (SLIP) service.
527 # The `ppp' pseudo-device implements the Point-to-Point Protocol.
528 # The `bpf' pseudo-device enables the Berkeley Packet Filter. Be
529 # aware of the legal and administrative consequences of enabling this
530 # option. The number of devices determines the maximum number of
531 # simultaneous BPF clients programs runnable.
532 # The `disc' pseudo-device implements a minimal network interface,
533 # which throws away all packets sent and never receives any. It is
534 # included for testing purposes. This shows up as the 'ds' interface.
535 # The `tun' pseudo-device implements (user-)ppp and nos-tun
536 # The `gif' pseudo-device implements IPv6 over IP4 tunneling,
537 # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
538 # IPv6 over IPv6 tunneling.
539 # The `gre' device implements two types of IP4 over IP4 tunneling:
540 # GRE and MOBILE, as specified in the RFC1701 and RFC2004.
541 # The `faith' pseudo-device captures packets sent to it and diverts them
542 # to the IPv4/IPv6 translation daemon.
543 # The `stf' device implements 6to4 encapsulation.
544 # The `ef' pseudo-device provides support for multiple ethernet frame types
545 # specified via ETHER_* options. See ef(4) for details.
547 # The PPP_BSDCOMP option enables support for compress(1) style entire
548 # packet compression, the PPP_DEFLATE is for zlib/gzip style compression.
549 # PPP_FILTER enables code for filtering the ppp data stream and selecting
550 # events for resetting the demand dial activity timer - requires bpf.
551 # See pppd(8) for more details.
553 pseudo-device ether #Generic Ethernet
554 pseudo-device vlan 1 #VLAN support
555 pseudo-device bridge #Bridging support
556 pseudo-device sppp #Generic Synchronous PPP
557 pseudo-device loop #Network loopback device
558 pseudo-device bpf #Berkeley packet filter
559 pseudo-device disc #Discard device (ds0, ds1, etc)
560 pseudo-device tun #Tunnel driver (ppp(8), nos-tun(8))
561 pseudo-device sl 2 #Serial Line IP
562 pseudo-device gre #IP over IP tunneling
563 pseudo-device ppp 2 #Point-to-point protocol
564 options PPP_BSDCOMP #PPP BSD-compress support
565 options PPP_DEFLATE #PPP zlib/deflate/gzip support
566 options PPP_FILTER #enable bpf filtering (needs bpf)
568 pseudo-device ef # Multiple ethernet frames support
569 options ETHER_II # enable Ethernet_II frame
570 options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
571 options ETHER_8022 # enable Ethernet_802.2 frame
572 options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
575 pseudo-device gif #IPv6 and IPv4 tunneling
576 pseudo-device faith 1 #for IPv6 and IPv4 translation
577 pseudo-device stf #6to4 IPv6 over IPv4 encapsulation
580 # Internet family options:
582 # MROUTING enables the kernel multicast packet forwarder, which works
585 # PIM enables Protocol Independent Multicast in the kernel.
586 # Requires MROUTING enabled.
588 # IPFIREWALL enables support for IP firewall construction, in
589 # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
590 # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
591 # limits the number of times a matching entry can be logged.
593 # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
594 # and if you do not add other rules during startup to allow access,
595 # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
596 # in /etc/rc.conf when first enabling this feature, then refining the
597 # firewall rules in /etc/rc.firewall after you've tested that the new kernel
598 # feature works properly.
600 # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
601 # allow everything. Use with care, if a cracker can crash your
602 # firewall machine, they can get to your protected machines. However,
603 # if you are using it as an as-needed filter for specific problems as
604 # they arise, then this may be for you. Changing the default to 'allow'
605 # means that you won't get stuck if the kernel and /sbin/ipfw binary get
608 # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''
610 # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
611 # packets without touching the ttl). This can be useful to hide firewalls
612 # from traceroute and similar tools.
614 # TCPDEBUG is undocumented.
616 options MROUTING # Multicast routing
617 options PIM # Protocol Independent Multicast
618 options IPFIREWALL #firewall
619 options IPFIREWALL_DEBUG #debug prints
620 options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
621 options IPFIREWALL_FORWARD #enable transparent proxy support
622 options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
623 options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
624 options IPV6FIREWALL #firewall for IPv6
625 options IPV6FIREWALL_VERBOSE
626 options IPV6FIREWALL_VERBOSE_LIMIT=100
627 options IPV6FIREWALL_DEFAULT_TO_ACCEPT
628 options IPDIVERT #divert sockets
629 options IPFILTER #ipfilter support
630 options IPFILTER_LOG #ipfilter logging
631 options IPFILTER_DEFAULT_BLOCK #block all packets by default
632 options IPSTEALTH #support for stealth forwarding
634 options NS # NETNS support
644 # The MBUF_STRESS_TEST option enables options which create
645 # various random failures / extreme cases related to mbuf
646 # functions. See the mbuf(9) manpage for a list of available
648 options MBUF_STRESS_TEST
650 # Statically link in accept filters
651 options ACCEPT_FILTER_DATA
652 options ACCEPT_FILTER_HTTP
655 # TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This
656 # prevents nmap et al. from identifying the TCP/IP stack, but breaks support
657 # for RFC1644 extensions and is not recommended for web servers.
659 options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
661 # ICMP_BANDLIM enables icmp error response bandwidth limiting. You
662 # typically want this option as it will help protect the machine from
663 # D.O.S. packet attacks.
667 # DUMMYNET enables the "dummynet" bandwidth limiter. You need
668 # IPFIREWALL as well. See the dummynet(4) and ipfw(8) manpages for more info.
671 options DUMMYNET_DEBUG
674 # ATM (HARP version) options
676 # ATM_CORE includes the base ATM functionality code. This must be included
679 # ATM_IP includes support for running IP over ATM.
681 # At least one (and usually only one) of the following signalling managers
682 # must be included (note that all signalling managers include PVC support):
683 # ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
684 # ATM_SPANS includes support for the `spans' signalling manager, which runs
685 # the FORE Systems's proprietary SPANS signalling protocol.
686 # ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
687 # which run the ATM Forum UNI 3.x signalling protocols.
689 # The `hea' driver provides support for the Efficient Networks, Inc.
690 # ENI-155p ATM PCI Adapter.
692 # The `hfa' driver provides support for the FORE Systems, Inc.
693 # PCA-200E ATM PCI Adapter.
695 options ATM_CORE #core ATM protocol family
696 options ATM_IP #IP over ATM support
697 options ATM_SIGPVC #SIGPVC signalling manager
698 options ATM_SPANS #SPANS signalling manager
699 options ATM_UNI #UNI signalling manager
700 device hea #Efficient ENI-155p ATM PCI
701 device hfa #FORE PCA-200E ATM PCI
703 # DEVICE_POLLING adds support for mixed interrupt-polling handling
704 # of network device drivers, which has significant benefits in terms
705 # of robustness to overloads and responsivity, as well as permitting
706 # accurate scheduling of the CPU time between kernel network processing
707 # and other activities. The drawback is a moderate (up to 1/pollhz seconds)
708 # potential increase in response times. See polling(4) for further details.
710 options DEVICE_POLLING
713 #####################################################################
717 # Only the root, /usr, and /tmp filesystems need be statically
718 # compiled; everything else will be automatically loaded at mount
719 # time. (Exception: the UFS family --- FFS, and MFS ---
720 # cannot currently be demand-loaded.) Some people still prefer
721 # to statically compile other filesystems as well.
723 # NB: The PORTAL and UNION filesystems are known to be
724 # buggy, and WILL panic your system if you attempt to do anything with
725 # them. They are included here as an incentive for some enterprising
726 # soul to sit down and fix them.
729 # One of these is mandatory:
730 options FFS #Fast filesystem
731 options MFS #Memory filesystem
732 options NFS #Network filesystem
734 # The rest are optional:
735 #options NFS_NOSERVER #Disable the NFS-server code.
736 options CD9660 #ISO 9660 filesystem
737 options FDESC #File descriptor filesystem
738 options MSDOSFS #MS DOS filesystem
739 options NTFS #NT filesystem
740 options NULLFS #NULL filesystem
741 options NWFS #NetWare filesystem
742 options PORTAL #Portal filesystem
743 options PROCFS #Process filesystem
744 options SMBFS #SMB/CIFS filesystem
745 options UDF #UDF filesystem
746 options HAMMER #HAMMER filesystem
748 # YYY-DR Till we rework the VOP methods for this filesystem
749 #options UNION #Union filesystem
750 # The xFS_ROOT options REQUIRE the associated ``options xFS''
751 options FFS_ROOT #FFS usable as root device
752 options NFS_ROOT #NFS usable as root device
754 # Soft updates is technique for improving UFS filesystem speed and
755 # making abrupt shutdown less risky.
758 # Directory hashing improves the speed of operations on very large
759 # directories at the expense of some memory.
762 # Make space in the kernel for a root filesystem on a md device.
763 # Define to the number of kilobytes to reserve for the filesystem.
764 options MD_ROOT_SIZE=10
766 # Make the md device a potential root device, either with preloaded
767 # images of type mfs_root or md_root.
770 # Specify double the default maximum size for malloc(9)-backed md devices.
771 options MD_NSECT=40000
773 # Allow this many swap-devices.
775 # In order to manage swap, the system must reserve bitmap space that
776 # scales with the largest mounted swap device multiplied by NSWAPDEV,
777 # regardless of whether other swap devices exist or not. So it
778 # is not a good idea to make this value too large.
781 # Disk quotas are supported when this option is enabled.
782 options QUOTA #enable disk quotas
784 # If you are running a machine just as a fileserver for PC and MAC
785 # users, using SAMBA or Netatalk, you may consider setting this option
786 # and keeping all those users' directories on a filesystem that is
787 # mounted with the suiddir option. This gives new files the same
788 # ownership as the directory (similar to group). It's a security hole
789 # if you let these users run programs, so confine it to file-servers
790 # (but it'll save you lots of headaches in those cases). Root owned
791 # directories are exempt and X bits are cleared. The suid bit must be
792 # set on the directory as well; see chmod(1) PC owners can't see/set
793 # ownerships so they keep getting their toes trodden on. This saves
794 # you all the support calls as the filesystem it's used on will act as
795 # they expect: "It's my dir so it must be my file".
800 options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
801 options NFS_MAXATTRTIMO=60
802 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
803 options NFS_MAXDIRATTRTIMO=60
804 options NFS_GATHERDELAY=10 # Default write gather delay (msec)
805 options NFS_UIDHASHSIZ=29 # Tune the size of nfssvc_sock with this
806 options NFS_WDELAYHASHSIZ=16 # and with this
807 options NFS_MUIDHASHSIZ=63 # Tune the size of nfsmount with this
808 options NFS_DEBUG # Enable NFS Debugging
811 options MSDOSFS_DEBUG # Enable MSDOSFS Debugging
814 # Add support for the EXT2FS filesystem of Linux fame. Be a bit
815 # careful with this - the ext2fs code has a tendency to lag behind
816 # changes and not be exercised very much, so mounting read/write could
817 # be dangerous (and even mounting read only could result in panics.)
821 # Use real implementations of the aio_* system calls. There are numerous
822 # stability and security issues in the current aio code that make it
823 # unsuitable for inclusion on machines with untrusted local users.
827 #####################################################################
830 # Real time extensions added in the 1993 Posix
831 # P1003_1B: Infrastructure
832 # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
833 # _KPOSIX_VERSION: Version kernel is built for
836 options _KPOSIX_PRIORITY_SCHEDULING
837 options _KPOSIX_VERSION=199309L
840 #####################################################################
843 # The granularity of operation is controlled by the kernel option HZ whose
844 # default value (100) means a granularity of 10ms (1s/HZ).
845 # Consider, however, that reducing the granularity too much might
846 # cause excessive overhead in clock interrupt processing,
847 # potentially causing ticks to be missed and thus actually reducing
848 # the accuracy of operation.
852 # The following options are used for debugging clock behavior only, and
853 # should not be used for production systems.
855 # CLK_CALIBRATION_LOOP will run the clock calibration loop at startup
856 # until the user presses a key.
858 options CLK_CALIBRATION_LOOP
860 # The following two options measure the frequency of the corresponding
861 # clock relative to the RTC (onboard mc146818a).
863 options CLK_USE_I8254_CALIBRATION
864 options CLK_USE_TSC_CALIBRATION
867 #####################################################################
870 # SCSI DEVICE CONFIGURATION
872 # The SCSI subsystem consists of the `base' SCSI code, a number of
873 # high-level SCSI device `type' drivers, and the low-level host-adapter
874 # device drivers. The host adapters are listed in the ISA and PCI
875 # device configuration sections below.
877 # Beginning with FreeBSD 2.0.5 you can wire down your SCSI devices so
878 # that a given bus, target, and LUN always come on line as the same
879 # device unit. In earlier versions the unit numbers were assigned
880 # in the order that the devices were probed on the SCSI bus. This
881 # means that if you removed a disk drive, you may have had to rewrite
882 # your /etc/fstab file, and also that you had to be careful when adding
883 # a new disk as it may have been probed earlier and moved your device
884 # configuration around.
886 # This old behavior is maintained as the default behavior. The unit
887 # assignment begins with the first non-wired down unit for a device
888 # type. For example, if you wire a disk as "da3" then the first
889 # non-wired disk will be assigned da4.
891 # The syntax for wiring down devices is:
893 # device scbus0 at ahc0 # Single bus device
894 # device scbus1 at ahc1 bus 0 # Single bus device
895 # device scbus3 at ahc2 bus 0 # Twin bus device
896 # device scbus2 at ahc2 bus 1 # Twin bus device
897 # device da0 at scbus0 target 0 unit 0
898 # device da1 at scbus3 target 1
899 # device da2 at scbus2 target 3
900 # device sa1 at scbus1 target 6
903 # "units" (SCSI logical unit number) that are not specified are
904 # treated as if specified as LUN 0.
906 # All SCSI devices allocate as many units as are required.
908 # The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
909 # configuration and doesn't have to be explicitly configured.
911 device scbus #base SCSI code
912 device ch #SCSI media changers
913 device da #SCSI direct access devices (aka disks)
914 device sa #SCSI tapes
915 device cd #SCSI CD-ROMs
916 device pass #CAM passthrough driver
917 device pt #SCSI processor type
918 device ses #SCSI SES/SAF-TE driver
922 # -- NOTE -- If you specify one of the bus/target/lun options, you must
924 # CAMDEBUG: When defined enables debugging macros
925 # CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses.
926 # CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets.
927 # CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns.
928 # CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
929 # CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
931 # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
932 # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
933 # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
934 # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
935 # queue after a bus reset, and the number of milliseconds to
936 # freeze the device queue after a bus device reset. This
937 # can be changed at boot and runtime with the
938 # kern.cam.scsi_delay tunable/sysctl.
940 options CAM_DEBUG_BUS=-1
941 options CAM_DEBUG_TARGET=-1
942 options CAM_DEBUG_LUN=-1
943 options CAM_DEBUG_FLAGS="CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB"
944 options CAM_MAX_HIGHPOWER=4
945 options SCSI_NO_SENSE_STRINGS
946 options SCSI_NO_OP_STRINGS
947 options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device
949 # Options for the CAM CDROM driver:
950 # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
951 # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
952 # enforced if there is I/O waiting for another LUN
953 # The compiled in defaults for these variables are 2 and 10 seconds,
956 # These can also be changed on the fly with the following sysctl variables:
957 # kern.cam.cd.changer.min_busy_seconds
958 # kern.cam.cd.changer.max_busy_seconds
960 options CHANGER_MIN_BUSY_SECONDS=2
961 options CHANGER_MAX_BUSY_SECONDS=10
963 # Options for the CAM sequential access driver:
964 # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
965 # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
966 # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
967 # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
968 # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
969 options SA_IO_TIMEOUT="(4)"
970 options SA_SPACE_TIMEOUT="(60)"
971 options SA_REWIND_TIMEOUT="(2*60)"
972 options SA_ERASE_TIMEOUT="(4*60)"
973 options SA_1FM_AT_EOD
975 # Optional timeout for the CAM processor target (pt) device
976 # This is specified in seconds. The default is 60 seconds.
977 options SCSI_PT_DEFAULT_TIMEOUT="60"
979 # Optional enable of doing SES passthrough on other devices (e.g., disks)
981 # Normally disabled because a lot of newer SCSI disks report themselves
982 # as having SES capabilities, but this can then clot up attempts to build
983 # build a topology with the SES device that's on the box these drives
985 options SES_ENABLE_PASSTHROUGH
988 #####################################################################
989 # MISCELLANEOUS DEVICES AND OPTIONS
991 # The `pty' device usually turns out to be ``effectively mandatory'',
992 # as it is required for `telnetd', `rlogind', `screen', `emacs', and
993 # `xterm', among others.
995 pseudo-device pty #Pseudo ttys
996 pseudo-device gzip #Exec gzipped a.out's
997 pseudo-device vn #Vnode driver (turns a file into a device)
998 pseudo-device md #Memory/malloc disk
999 pseudo-device snp #Snoop device - to look at pty/vty/etc..
1000 pseudo-device ccd 4 #Concatenated disk driver
1002 # Configuring Vinum into the kernel is not necessary, since the kld
1003 # module gets started automatically when vinum(8) starts. This
1004 # device is also untested. Use at your own risk.
1006 # The option VINUMDEBUG must match the value set in CFLAGS
1007 # in src/sbin/vinum/Makefile. Failure to do so will result in
1008 # the following message from vinum(8):
1010 # Can't get vinum config: Invalid argument
1012 # see vinum(4) for more reasons not to use these options.
1013 pseudo-device vinum #Vinum concat/mirror/raid driver
1014 options VINUMDEBUG #enable Vinum debugging hooks
1016 # Kernel side iconv library
1019 # Size of the kernel message buffer. Should be N * pagesize.
1020 options MSGBUF_SIZE=40960
1023 #####################################################################
1024 # HARDWARE DEVICE CONFIGURATION
1026 # ISA and EISA devices:
1027 # EISA support is available for some device, so they can be auto-probed.
1030 # Mandatory ISA devices: isa, npx
1034 # ISA-PnP BIOS support
1038 # Options for `isa':
1040 # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A
1041 # interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
1042 # This option breaks suspend/resume on some portables.
1044 # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A
1045 # interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
1046 # Automatic EOI is documented not to work for for the slave with the
1047 # original i8259A, but it works for some clones and some integrated
1050 # MAXMEM specifies the amount of RAM on the machine; if this is not
1051 # specified, DragonFly will first read the amount of memory from the CMOS
1052 # RAM, so the amount of memory will initially be limited to 64MB or 16MB
1053 # depending on the BIOS. If the BIOS reports 64MB, a memory probe will
1054 # then attempt to detect the installed amount of RAM. If this probe
1055 # fails to detect >64MB RAM you will have to use the MAXMEM option.
1056 # The amount is in kilobytes, so for a machine with 128MB of RAM, it would
1057 # be 131072 (128 * 1024).
1059 # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to
1060 # reset the CPU for reboot. This is needed on some systems with broken
1061 # keyboard controllers.
1063 # PAS_JOYSTICK_ENABLE enables the gameport on the ProAudio Spectrum
1065 options COMPAT_OLDISA #FreeBSD 2.2 and 3.x compatibility shims
1068 options MAXMEM="(128*1024)"
1069 #options BROKEN_KEYBOARD_RESET
1070 #options PAS_JOYSTICK_ENABLE
1072 # Enable support for the kernel PLL to use an external PPS signal,
1073 # under supervision of [x]ntpd(8)
1074 # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
1078 # The keyboard controller; it controls the keyboard and the PS/2 mouse.
1079 device atkbdc0 at isa? port IO_KBD
1082 device atkbd0 at atkbdc? irq 1
1084 # Options for atkbd:
1085 options ATKBD_DFLT_KEYMAP # specify the built-in keymap
1086 makeoptions ATKBD_DFLT_KEYMAP="jp.106"
1088 # These options are valid for other keyboard drivers as well.
1089 options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
1090 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
1092 # `flags' for atkbd:
1093 # 0x01 Force detection of keyboard, else we always assume a keyboard
1094 # 0x02 Don't reset keyboard, useful for some newer ThinkPads
1095 # 0x03 Force detection and avoid reset, might help with certain
1097 # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
1100 device psm0 at atkbdc? irq 12
1103 options PSM_HOOKRESUME #hook the system resume event, useful
1105 options PSM_RESETAFTERSUSPEND #reset the device at the resume event
1107 # The video card driver.
1111 # Try the following option if the mouse pointer is not drawn correctly
1112 # or font does not seem to be loaded properly. May cause flicker on
1114 options VGA_ALT_SEQACCESS
1116 options VGA_DEBUG=2 # enable VGA debug output
1118 # If you can dispense with some vga driver features, you may want to
1119 # use the following options to save some memory.
1120 #options VGA_NO_FONT_LOADING # don't save/load font
1121 #options VGA_NO_MODE_CHANGE # don't change video modes
1123 # Older video cards may require this option for proper operation.
1124 options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs
1126 # The following option probably won't work with the LCD displays.
1127 options VGA_WIDTH90 # support 90 column modes
1129 # To include support for VESA video modes
1131 options VESA_DEBUG=2 # enable VESA debug output
1133 # Splash screen at start up! Screen savers require this too.
1134 pseudo-device splash
1136 # The syscons console driver (sco color console compatible).
1138 options MAXCONS=16 # number of virtual consoles
1139 options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
1140 options SC_DEBUG_LEVEL=5 # enable debug output
1141 options SC_DFLT_FONT # compile font in
1142 makeoptions SC_DFLT_FONT=cp850
1143 options SC_DISABLE_DDBKEY # disable `debug' key
1144 options SC_DISABLE_REBOOT # disable reboot key sequence
1145 options SC_HISTORY_SIZE=200 # number of history buffer lines
1146 options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
1147 options SC_PIXEL_MODE # add support for the raster text mode
1149 # The following options will let you change the default colors of syscons.
1150 options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)"
1151 options SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)"
1152 options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)"
1153 options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)"
1155 # If you have a two button mouse, you may want to add the following option
1156 # to use the right button of the mouse to paste text.
1157 options SC_TWOBUTTON_MOUSE
1159 # You can selectively disable features in syscons.
1160 #options SC_NO_CUTPASTE
1161 #options SC_NO_FONT_LOADING
1162 #options SC_NO_HISTORY
1163 #options SC_NO_SYSMOUSE
1166 # The Numeric Processing eXtension driver. In addition to this, you
1167 # may configure a math emulator (see above). If your machine has a
1168 # hardware FPU and the kernel configuration includes the npx device
1169 # *and* a math emulator compiled into the kernel, the hardware FPU
1170 # will be used, unless it is found to be broken or unless "flags" to
1171 # npx0 includes "0x08", which requests preference for the emulator.
1172 device npx0 at nexus? port IO_NPX flags 0x0 irq 13
1176 # 0x01 don't use the npx registers to optimize bcopy.
1177 # 0x02 don't use the npx registers to optimize bzero.
1178 # 0x04 don't use the npx registers to optimize copyin or copyout.
1179 # 0x08 use emulator even if hardware FPU is available.
1180 # The npx registers are normally used to optimize copying and zeroing when
1181 # all of the following conditions are satisfied:
1182 # I586_CPU is an option
1183 # the cpu is an i586 (perhaps not a Pentium)
1184 # the probe for npx0 succeeds
1185 # INT 16 exception handling works.
1186 # Then copying and zeroing using the npx registers is normally 30-100% faster.
1187 # The flags can be used to control cases where it doesn't work or is slower.
1188 # Setting them at boot time using userconfig works right (the optimizations
1189 # are not used until later in the bootstrap when npx0 is attached).
1190 # Flag 0x08 automatically disables the i586 optimized routines.
1194 # Optional ISA and EISA devices:
1198 # SCSI host adapters: `aha', `aic', `bt'
1200 # adv: All Narrow SCSI bus AdvanSys controllers.
1201 # adw: Second Generation AdvanSys controllers including the ADV940UW.
1203 # ahc: Adaptec 274x/284x/294x
1205 # bt: Most Buslogic controllers
1206 # ncv: NCR 53C500 based SCSI host adapters.
1207 # nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
1208 # stg: TMC 18C30, 18C50 based ISA/PC Card SCSI host adapters.
1210 # Note that the order is important in order for Buslogic cards to be
1214 device bt0 at isa? port IO_BT0
1221 device stg0 at isa? port 0x140 irq 11
1224 # Adaptec FSA RAID controllers, including integrated DELL controller,
1225 # the Dell PERC 2/QC and the HP NetRAID-4M
1229 device aacp # SCSI Passthrough interface (optional, CAM required)
1232 # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
1233 # one entry is needed; the code will find and configure all supported
1236 device ida # Compaq Smart RAID
1237 device mlx # Mylex DAC960
1238 device amr # AMI MegaRAID
1243 device twe # 3ware ATA RAID
1244 device twa # 3ware SATA RAID
1245 options TWA_DEBUG=10 # enable debug messages
1246 options TWA_FLASH_FIRMWARE
1249 # Promise Supertrack SX6000
1259 # The 'ATA' driver supports all ATA and ATAPI devices.
1260 # You only need one "device ata" for it to find all
1261 # PCI ATA/ATAPI devices on modern machines.
1263 #device atadisk # ATA disk drives
1264 #device atapicd # ATAPI CDROM drives
1265 #device atapifd # ATAPI floppy drives
1266 #device atapist # ATAPI tape drives
1267 #device atapicam # emulate ATAPI devices as SCSI ditto via CAM
1268 # needs CAM to be present (scbus & pass)
1269 # The 'NATA' set of drivers are set to replace the previous ATA drivers,
1270 # and this set of drivers is mutually exclusive with the old ones. This means,
1271 # you can't have both at the same time!
1273 device natadisk # ATA disk drives
1274 device natapicd # ATAPI CD/DVD drives
1275 device natapifd # ATAPI floppy drives
1276 device natapist # ATAPI tape drives
1277 device natapicam # ATAPI CAM layer emulation
1278 device nataraid # support for ATA software RAID controllers
1279 device natausb # ATA-over-USB support
1281 #The following options are valid on the ATA & NATA drivers:
1283 # ATA_STATIC_ID: controller numbering is static (like the old driver)
1284 # else the device numbers are dynamically allocated.
1285 options ATA_STATIC_ID
1288 # For older non-PCI systems, these are the lines to use:
1289 #device ata0 at isa? port IO_WD1 irq 14
1290 #device ata1 at isa? port IO_WD2 irq 15
1293 # Standard floppy disk controllers: `fdc' and `fd'
1295 device fdc0 at isa? port IO_FD1 irq 6 drq 2
1297 # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
1298 # gotta turn it actually on by setting the variable fd_debug with DDB,
1302 device fd0 at fdc0 drive 0
1303 device fd1 at fdc0 drive 1
1306 # Other standard PC hardware: `mse', `sio', etc.
1308 # mse: Logitech and ATI InPort bus mouse ports
1309 # sio: serial ports (see sio(4))
1311 device mse0 at isa? port 0x23c irq 5
1313 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
1316 # `flags' for serial drivers that support consoles (only for sio now):
1317 # 0x10 enable console support for this unit. The other console flags
1318 # are ignored unless this is set. Enabling console support does
1319 # not make the unit the preferred console - boot with -h or set
1320 # the 0x20 flag for that. Currently, at most one unit can have
1321 # console support; the first one (in config file order) with
1322 # this flag set is preferred. Setting this flag for sio0 gives
1323 # the old behaviour.
1324 # 0x20 force this unit to be the console (unless there is another
1325 # higher priority console). This replaces the COMCONSOLE option.
1326 # 0x40 reserve this unit for low level console operations. Do not
1327 # access the device in any normal way.
1328 # 0x80 use this port for serial line gdb support in ddb.
1330 # PnP `flags' (set via userconfig using pnp x flags y)
1331 # 0x1 disable probing of this device. Used to prevent your modem
1332 # from being attached as a PnP modem.
1335 # Options for serial drivers that support consoles (only for sio now):
1336 options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
1338 options CONSPEED=115200 # speed for serial console
1341 # Solaris implements a new BREAK which is initiated by a character
1342 # sequence CR ~ ^b which is similar to a familiar pattern used on
1343 # Sun servers by the Remote Console.
1344 options ALT_BREAK_TO_DEBUGGER
1347 options COM_ESP #code for Hayes ESP
1348 options COM_MULTIPORT #code for some cards with shared IRQs
1350 # Other flags for sio that aren't documented in the man page.
1351 # 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for
1352 # ST16650A-compatible UARTs.
1354 # PCI Universal Communications driver
1355 # Supports various single and multi port PCI serial cards. Maybe later
1356 # also the parallel ports on combination serial/parallel cards. New cards
1357 # can be added in src/sys/dev/misc/puc/pucdata.c.
1359 # If the PUC_FASTINTR option is used the driver will try to use fast
1360 # interrupts. The card must then be the only user of that interrupt.
1361 # Interrupts cannot be shared when using PUC_FASTINTR.
1363 options PUC_FASTINTR
1366 # Network interfaces: `ed', `el', `ep', `ie', `is', `le', `lnc'
1368 # ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver (requires sppp)
1369 # cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters
1370 # ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
1371 # el: 3Com 3C501 (slow!)
1373 # ex: Intel EtherExpress Pro/10 and other i82595-based adapters
1374 # fe: Fujitsu MB86960A/MB86965A Ethernet
1375 # ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210; Intel EtherExpress
1376 # le: Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100,
1377 # DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422)
1378 # lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 & Am79C960)
1379 # rdp: RealTek RTL 8002-based pocket ethernet adapters
1380 # sbni: Granch SBNI12-xx adapters
1381 # sbsh: Granch SBNI16 SHDSL modem PCI adapters
1382 # sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp)
1383 # wl: Lucent Wavelan (ISA card only).
1384 # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
1385 # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
1386 # bridge with a PCMCIA adapter plugged into it.
1387 # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1388 # PCI and ISA varieties.
1389 # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller.
1391 device ar0 at isa? port 0x300 irq 10 iomem 0xd0000
1392 device cs0 at isa? port 0x300
1393 device ed0 at isa? port 0x280 irq 5 iomem 0xd8000
1394 device el0 at isa? port 0x300 irq 9
1397 device fe0 at isa? port 0x300
1398 device ie0 at isa? port 0x300 irq 5 iomem 0xd0000
1399 device ie1 at isa? port 0x360 irq 7 iomem 0xd0000
1400 device le0 at isa? port 0x300 irq 5 iomem 0xd0000
1401 device lnc0 at isa? port 0x280 irq 10 drq 0
1402 device rdp0 at isa? port 0x378 irq 7 flags 2
1403 device sbni0 at isa? port 0x210 irq 5 flags 0xefdead
1406 device sn0 at isa? port 0x300 irq 10
1408 # Wlan support is mandatory for some wireless LAN devices.
1409 device wlan # 802.11 support
1410 device wlan_acl # 802.11 MAC-based access control for AP
1411 device wlan_ccmp # 802.11 CCMP support
1412 device wlan_tkip # 802.11 TKIP support
1413 device wlan_wep # 802.11 WEP support
1414 device wlan_xauth # 802.11 WPA or 802.1x authentication for AP
1415 device wlan_ratectl_onoe # 802.11 Onoe TX rate control algorithm
1416 device wlan_ratectl_amrr # 802.11 AMRR TX rate control algorithm
1417 device wlan_ratectl_sample # 802.11 Sample TX rate control algorithm
1418 options WLCACHE # enables the signal-strength cache
1419 options WLDEBUG # enables verbose debugging output
1420 device an # Aironet Communications 4500/4800
1421 device ath # Atheros AR521x
1422 device ath_hal # Atheros Hardware Access Layer
1423 #device ath_rate_amrr # Atheros AMRR TX rate control algorithm
1424 #device ath_rate_onoe # Atheros Onoe TX rate control algorithm
1425 device ath_rate_sample # Atheros Sample TX rate control algorithm
1426 options ATH_DEBUG # turn on debugging output (see hw.ath.debug)
1427 options ATH_DIAGAPI # diagnostic interface to the HAL
1428 options ATH_RXBUF=80 # number of RX buffers to allocate
1429 options ATH_TXBUF=400 # number of TX buffers to allocate
1430 device iwl # Intel PRO/Wireless 2100
1431 device iwi # Intel PRO/Wireless 2200BG/2915ABG
1432 device wi # WaveLAN/IEEE, PRISM-II, Spectrum24 802.11DS
1433 device rtw # RealTek 8180
1434 # Requires wlan_ratectl_onoe and wlan_wep
1435 device acx # TI ACX100/ACX111.
1436 # Requires wlan_ratectl_amrr and
1438 device wl0 at isa? port 0x300 # T1 speed ISA/radio lan
1439 device xe # Xircom PCMCIA
1440 device ral # Ralink Technology 802.11 wireless NIC
1441 # Requires wlan_ratectl_onoe and
1442 # wlan_ratectl_sample
1445 # ATM related options
1447 # The `en' device provides support for Efficient Networks (ENI)
1448 # ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
1450 # atm pseudo-device provides generic atm functions and is required for
1452 # NATM enables the netnatm protocol family that can be used to
1455 # the current driver supports only PVC operations (no atm-arp, no multicast).
1456 # for more details, please read the original documents at
1457 # http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
1461 options NATM #native ATM
1465 # The flags of the device tells the device a bit more info about the
1466 # device that normally is obtained through the PnP interface.
1467 # bit 2..0 secondary DMA channel;
1468 # bit 4 set if the board uses two dma channels;
1469 # bit 15..8 board type, overrides autodetection; leave it
1470 # zero if don't know what to put in (and you don't,
1471 # since this is unsupported at the moment...).
1473 # This driver will use the new PnP code if it's available. You might
1474 # need PNPBIOS for ISA devices.
1476 # If you have a GUS-MAX card and want to use the CS4231 codec on the
1477 # card the drqs for the gus max must be 8 bit (1, 2, or 3).
1479 # If you would like to use the full duplex option on the gus, then define
1480 # flags to be the ``read dma channel''.
1483 # Basic sound card support:
1485 # For PnP/PCI sound cards:
1487 device "snd_als4000"
1493 device "snd_emu10k1"
1499 device "snd_maestro"
1500 device "snd_maestro3"
1502 device "snd_neomagic"
1507 device "snd_t4dwave"
1508 device "snd_via8233"
1509 device "snd_via82c686"
1511 # For non-pnp sound cards:
1512 device pcm0 at isa? irq 10 drq 1 flags 0x0
1517 # Miscellaneous hardware:
1519 # wt: Wangtek and Archive QIC-02/QIC-36 tape drives
1520 # ctx: Cortex-I frame grabber
1521 # apm: Laptop Advanced Power Management (experimental)
1522 # spigot: The Creative Labs Video Spigot video-acquisition board
1523 # meteor: Matrox Meteor video capture board
1524 # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
1525 # cy: Cyclades serial driver
1526 # dgb: Digiboard PC/Xi and PC/Xe series driver (ALPHA QUALITY!)
1527 # dgm: Digiboard PC/Xem driver
1528 # gp: National Instruments AT-GPIB and AT-GPIB/TNT board
1529 # asc: GI1904-based hand scanners, e.g. the Trust Amiscan Grey
1530 # gsc: Genius GS-4500 hand scanner.
1532 # labpc: National Instrument's Lab-PC and Lab-PC+
1533 # rc: RISCom/8 multiport card
1534 # rp: Comtrol Rocketport(ISA) - single card
1535 # tw: TW-523 power line interface for use with X-10 home control products
1536 # si: Specialix SI/XIO 4-32 port terminal multiplexor
1537 # spic: Sony Programmable I/O controller (VAIO notebooks)
1538 # stl: Stallion EasyIO and EasyConnection 8/32 (ISA and PCI), EasyConnection 8/64 PCI
1539 # stli: Stallion EasyConnection 8/64 ISA/EISA, ONboard, Brumby (intelligent)
1540 # nmdm: nullmodem terminal driver (see nmdm(4))
1543 # The flags takes the following meaning for apm0:
1544 # 0x0020 Statclock is broken.
1545 # If apm is omitted, some systems require sysctl -w kern.timecounter.method=1
1546 # for correct timekeeping.
1548 # Notes on the spigot:
1549 # The video spigot is at 0xad6. This port address can not be changed.
1550 # The irq values may only be 10, 11, or 15
1551 # I/O memory is an 8kb region. Possible values are:
1552 # 0a0000, 0a2000, ..., 0fffff, f00000, f02000, ..., ffffff
1553 # The start address must be on an even boundary.
1554 # Add the following option if you want to allow non-root users to be able
1555 # to access the spigot. This option is not secure because it allows users
1556 # direct access to the I/O page.
1557 # options SPIGOT_UNSECURE
1559 # Notes on the Comtrol Rocketport driver:
1561 # The exact values used for rp0 depend on how many boards you have
1562 # in the system. The manufacturer's sample configs are listed as:
1564 # Comtrol Rocketport ISA single card
1565 # device rp0 at isa? port 0x280
1567 # If instead you have two ISA cards, one installed at 0x100 and the
1568 # second installed at 0x180, then you should add the following to
1569 # your kernel configuration file:
1571 # device rp0 at isa? port 0x100
1572 # device rp1 at isa? port 0x180
1574 # For 4 ISA cards, it might be something like this:
1576 # device rp0 at isa? port 0x180
1577 # device rp1 at isa? port 0x100
1578 # device rp2 at isa? port 0x340
1579 # device rp3 at isa? port 0x240
1581 # And for PCI cards, you only need say:
1585 # Notes on the Digiboard driver:
1587 # The following flag values have special meanings:
1588 # 0x01 - alternate layout of pins (dgb & dgm)
1589 # 0x02 - use the windowed PC/Xe in 64K mode (dgb only)
1591 # Notes on the Specialix SI/XIO driver:
1592 # **This is NOT a Specialix supported Driver!**
1593 # The host card is memory, not IO mapped.
1594 # The Rev 1 host cards use a 64K chunk, on a 32K boundary.
1595 # The Rev 2 host cards use a 32K chunk, on a 32K boundary.
1596 # The cards can use an IRQ of 11, 12 or 15.
1598 # Notes on the Stallion stl and stli drivers:
1599 # See src/sys/platform/pc32/isa/README.stl for complete instructions.
1600 # This is version 2.0.0, unsupported by Stallion.
1601 # The stl driver has a secondary IO port hard coded at 0x280. You need
1602 # to change src/sys/dev/serial/stl/stallion.c if you reconfigure this on the boards.
1603 # The "flags" and "iosiz" settings on the stli driver depend on the board:
1604 # EasyConnection 8/64 ISA: flags 23 iosiz 0x1000
1605 # EasyConnection 8/64 EISA: flags 24 iosiz 0x10000
1606 # ONboard ISA: flags 4 iosiz 0x10000
1607 # ONboard EISA: flags 7 iosiz 0x10000
1608 # Brumby: flags 2 iosiz 0x4000
1609 # Stallion: flags 1 iosiz 0x10000
1610 # For the PCI cards, "device stl" will suffice.
1612 # for the SoundBlaster 16 multicd - up to 4 devices
1613 device wt0 at isa? port 0x300 irq 5 drq 1
1614 device ctx0 at isa? port 0x230 iomem 0xd0000
1615 device spigot0 at isa? port 0xad6 irq 15 iomem 0xee000
1617 device gp0 at isa? port 0x2c0
1618 device gsc0 at isa? port IO_GSC1 drq 3
1619 device joy0 at isa? port IO_GAME
1620 device cy0 at isa? irq 10 iomem 0xd4000 iosiz 0x2000
1621 options CY_PCI_FASTINTR # Use with cy_pci unless irq is shared
1622 #device dgb0 at isa? port 0x220 iomem 0xfc000
1623 #options NDGBPORTS=16 # Defaults to 16*NDGB
1624 device dgm0 at isa? port 0x104 iomem 0xd0000
1625 device labpc0 at isa? port 0x260 irq 5
1626 device rc0 at isa? port 0x220 irq 12
1628 #device rp0 at isa? port 0x280
1629 # the port and irq for tw0 are fictitious
1630 device tw0 at isa? port 0x380 irq 11
1631 device si0 at isa? iomem 0xd0000 irq 12
1632 device asc0 at isa? port IO_ASC1 drq 3 irq 10
1633 device spic0 at isa? irq 0 port 0x10a0
1634 device stl0 at isa? port 0x2a0 irq 10
1635 device stli0 at isa? port 0x2a0 iomem 0xcc000 flags 23 iosiz 0x1000
1636 # nullmodem terminal driver
1642 # The EISA bus device is `eisa'. It provides auto-detection and
1643 # configuration support for all devices on the EISA bus.
1645 # The `ahb' device provides support for the Adaptec 174X adapter.
1647 # The `ahc' device provides support for the Adaptec 274X and 284X
1648 # adapters. The 284X, although a VLB card, responds to EISA probes.
1653 # The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1654 # controllers that have it configured only if this option is set. Unfortunately,
1655 # this doesn't work on some motherboards, which prevents it from being the
1657 options AHC_ALLOW_MEMIO
1659 # The adw driver will attempt to use memory mapped I/O for all PCI
1660 # controllers that have it configured only if this option is set.
1661 options ADW_ALLOW_MEMIO
1663 # By default, only 10 EISA slots are probed, since the slot numbers
1664 # above clash with the configuration address space of the PCI subsystem,
1665 # and the EISA probe is not very smart about this. This is sufficient
1666 # for most machines, but in particular the HP NetServer LC series comes
1667 # with an onboard AIC7770 dual-channel SCSI controller on EISA slot #11,
1668 # thus you need to bump this figure to 12 for them.
1669 options EISA_SLOTS=12
1672 # PCI devices & PCI options:
1674 # The main PCI bus device is `pci'. It provides auto-detection and
1675 # configuration support for all devices on the PCI bus, using either
1676 # configuration mode defined in the PCI specification.
1682 #Enable pci resources left off by a "lazy" BIOS.
1684 #WARNING! PCI_ENABLE_IO_MODES IS A VERY DANGEROUS OPTION AND MANY
1685 #SYSTEMS WILL EXPERIENCE INSTABILITY WITH IT ON. USE ONLY AS A LAST
1688 options PCI_ENABLE_IO_MODES
1689 #options PCI_QUIET #quiets PCI code on chipset settings
1690 options COMPAT_OLDPCI #FreeBSD 2.2 and 3.x compatibility shims
1691 options PCI_MAP_FIXUP #fixup lazy PCI mappings for certain devices,
1692 #e.g. ATA controllers in legacy mode. NATA
1693 #requires this, don't use it with old ATA!
1700 # The `ahc' device provides support for the Adaptec 29/3940(U)(W)
1701 # and motherboard based AIC7870/AIC7880 adapters.
1703 options AHC_DEBUG_OPTS=0xffffffff
1704 options AHC_REG_PRETTY_PRINT
1705 options AHC_TMODE_ENABLE
1707 # The 'ahd' device provides support for the Adaptec 79xx Ultra320
1708 # SCSI adapters. Options are documented in the ahd(4) manpage:
1710 options AHD_DEBUG_OPTS=0xffffffff
1711 options AHD_REG_PRETTY_PRINT
1712 #options AHD_TMODE_ENABLE=0xff
1714 # The `amd' device provides support for the AMD 53C974 SCSI host
1715 # adapter chip as found on devices such as the Tekram DC-390(T).
1717 # The `bge' device provides support for gigabit ethernet adapters
1718 # based on the Broadcom BCM570x family of controllers, including the
1719 # 3Com 3c996-T, the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41,
1720 # and the embedded gigE NICs on Dell PowerEdge 2550 servers.
1722 # The `ncr' device provides support for the NCR 53C810 and 53C825
1723 # self-contained SCSI host adapters.
1725 # The `isp' device provides support for the Qlogic ISP 1020, 1040
1726 # nd 1040B PCI SCSI host adapters, ISP 1240 Dual Ultra SCSI,
1727 # ISP 1080 and 1280 (Dual) Ultra2, ISP 12160 Ultra3 SCSI, as well as
1728 # the Qlogic ISP 2100 and ISP 2200 Fibre Channel Host Adapters.
1730 # The `dc' device provides support for PCI fast ethernet adapters
1731 # based on the DEC/Intel 21143 and various workalikes including:
1732 # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1733 # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1734 # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1735 # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1736 # replaces the old al, ax, dm, pn and mx drivers. List of brands:
1737 # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1738 # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1739 # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1742 # The `de' device provides support for the Digital Equipment DC21040
1743 # self-contained Ethernet adapter.
1745 # The `em' device provides support for the Intel Pro/1000 Family of Gigabit
1746 # adapters (82542, 82543, 82544, 82540).
1748 # The `et' device provides support for the Agere ET1310 10/100/1000 PCIe
1751 # The `fxp' device provides support for the Intel EtherExpress Pro/100B
1752 # PCI Fast Ethernet adapters.
1754 # The 'lge' device provides support for PCI gigabit ethernet adapters
1755 # based on the Level 1 LXT1001 NetCellerator chipset. This includes the
1756 # D-Link DGE-500SX, SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1758 # The 'my' device provides support for the Myson MTD80X and MTD89X PCI
1759 # Fast Ethernet adapters.
1761 # The 'nge' device provides support for PCI gigabit ethernet adapters
1762 # based on the National Semiconductor DP83820 and DP83821 chipset. This
1763 # includes the SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante
1764 # FriendlyNet GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the
1765 # LinkSys EG1032 and EG1064, the Surecom EP-320G-TX and the Netgear GA622T.
1767 # The 'pcn' device provides support for PCI fast ethernet adapters based
1768 # on the AMD Am79c97x chipsets, including the PCnet/FAST, PCnet/FAST+,
1769 # PCnet/PRO and PCnet/Home. These were previously handled by the lnc
1770 # driver (and still will be if you leave this driver out of the kernel).
1772 # Te 're' device provides support for PCI GigaBit ethernet adapters based
1773 # on the RealTek 8169 chipset. It also supports the 8139C+ and is the
1774 # preferred driver for that chip.
1776 # The 'rl' device provides support for PCI fast ethernet adapters based
1777 # on the RealTek 8129/8139 chipset. Note that the RealTek driver defaults
1778 # to using programmed I/O to do register accesses because memory mapped
1779 # mode seems to cause severe lockups on SMP hardware. This driver also
1780 # supports the Accton EN1207D `Cheetah' adapter, which uses a chip called
1781 # the MPX 5030/5038, which is either a RealTek in disguise or a RealTek
1782 # workalike. Note that the D-Link DFE-530TX+ uses the RealTek chipset
1783 # and is supported by this driver, not the 'vr' driver.
1785 # The 'sf' device provides support for Adaptec Duralink PCI fast
1786 # ethernet adapters based on the Adaptec AIC-6915 "starfire" controller.
1787 # This includes dual and quad port cards, as well as one 100baseFX card.
1788 # Most of these are 64-bit PCI devices, except for one single port
1789 # card which is 32-bit.
1791 # The 'ste' device provides support for adapters based on the Sundance
1792 # Technologies ST201 PCI fast ethernet controller. This includes the
1795 # The 'sis' device provides support for adapters based on the Silicon
1796 # Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet controller
1799 # The 'sk' device provides support for the SysKonnect SK-984x series
1800 # PCI gigabit ethernet NICs. This includes the SK-9841 and SK-9842
1801 # single port cards (single mode and multimode fiber) and the
1802 # SK-9843 and SK-9844 dual port cards (also single mode and multimode).
1803 # The driver will autodetect the number of ports on the card and
1804 # attach each one as a separate network interface.
1806 # The 'ti' device provides support for PCI gigabit ethernet NICs based
1807 # on the Alteon Networks Tigon 1 and Tigon 2 chipsets. This includes the
1808 # Alteon AceNIC, the 3Com 3c985, the Netgear GA620 and various others.
1809 # Note that you will probably want to bump up NMBCLUSTERS a lot to use
1812 # The 'tl' device provides support for the Texas Instruments TNETE100
1813 # series 'ThunderLAN' cards and integrated ethernet controllers. This
1814 # includes several Compaq Netelligent 10/100 cards and the built-in
1815 # ethernet controllers in several Compaq Prosignia, Proliant and
1816 # Deskpro systems. It also supports several Olicom 10Mbps and 10/100
1819 # The `tx' device provides support for the SMC 9432 TX, BTX and FTX cards.
1821 # The `txp' device provides support for the 3Com 3cR990 "Typhoon"
1824 # The `vr' device provides support for various fast ethernet adapters
1825 # based on the VIA Technologies VT3043 `Rhine I' and VT86C100A `Rhine II'
1826 # chips, including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking
1827 # Technologies PN102TX, and the AOpen/Acer ALN-320.
1829 # The `vx' device provides support for the 3Com 3C590 and 3C595
1832 # The `wb' device provides support for various fast ethernet adapters
1833 # based on the Winbond W89C840F chip. Note: this is not the same as
1834 # the Winbond W89C940F, which is an NE2000 clone.
1836 # The `xl' device provides support for the 3Com 3c900, 3c905 and
1837 # 3c905B (Fast) Etherlink XL cards and integrated controllers. This
1838 # includes the integrated 3c905B-TX chips in certain Dell Optiplex and
1839 # Dell Precision desktop machines and the integrated 3c905-TX chips
1840 # in Dell Latitude laptop docking stations.
1842 # The `meteor' device is a PCI video capture board. It can also have the
1843 # following options:
1844 # options METEOR_ALLOC_PAGES=xxx preallocate kernel pages for data entry
1845 # figure (ROWS*COLUMN*BYTES_PER_PIXEL*FRAME+PAGE_SIZE-1)/PAGE_SIZE
1846 # options METEOR_DEALLOC_PAGES remove all allocated pages on close(2)
1847 # options METEOR_DEALLOC_ABOVE=xxx remove all allocated pages above the
1848 # specified amount. If this value is below the allocated amount no action
1850 # options METEOR_SYSTEM_DEFAULT={METEOR_PAL|METEOR_NTSC|METEOR_SECAM}, used
1851 # for initialization of fps routine when a signal is not present.
1853 # The 'bktr' device is a PCI video capture device using the Brooktree
1854 # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
1855 # TV card, eg Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
1856 # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
1858 # options OVERRIDE_CARD=xxx
1859 # options OVERRIDE_TUNER=xxx
1860 # options OVERRIDE_MSP=1
1861 # options OVERRIDE_DBX=1
1862 # These options can be used to override the auto detection
1863 # The current values for xxx are found in src/sys/dev/video/bktr/bktr_card.h
1864 # Using sysctl(8) run-time overrides on a per-card basis can be made
1866 # options BKTR_SYSTEM_DEFAULT=BROOKTREE_PAL
1868 # options BKTR_SYSTEM_DEFAULT=BROOKTREE_NTSC
1869 # Specifes the default video capture mode.
1870 # This is required for Dual Crystal (28&35Mhz) boards where PAL is used
1871 # to prevent hangs during initialisation. eg VideoLogic Captivator PCI.
1873 # options BKTR_USE_PLL
1874 # PAL or SECAM users who have a 28Mhz crystal (and no 35Mhz crystal)
1875 # must enable PLL mode with this option. eg some new Bt878 cards.
1877 # options BKTR_GPIO_ACCESS
1878 # This enable IOCTLs which give user level access to the GPIO port.
1880 # options BKTR_NO_MSP_RESET
1881 # Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
1883 # options BKTR_430_FX_MODE
1884 # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
1886 # options BKTR_SIS_VIA_MODE
1887 # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
1888 # needed for some old SiS and VIA chipset motherboards.
1889 # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
1890 # motherboards and motherboards with bad or incomplete PCI 2.1 support.
1891 # As a rough guess, old = before 1998
1893 # options BKTR_NEW_MSP34XX_DRIVER
1894 # Use new, more complete initialization scheme for the msp34* soundchip.
1895 # Should fix stereo autodetection if the old driver does only output
1898 # options BKTR_OVERRIDE_CARD=xxx
1899 # options BKTR_OVERRIDE_DBX=xxx
1900 # options BKTR_OVERRIDE_MSP=xxx
1901 # options BKTR_OVERRIDE_TUNER=xxx
1902 # These options can be used to select a specific device, regardless of
1903 # the autodetection and i2c device checks (see comments in bktr_card.c).
1905 device ahc # AHA2940 and onboard AIC7xxx devices
1906 device ahd # AIC79xx devices
1907 device amd # AMD 53C974 (Tekram DC-390(T))
1908 device isp # Qlogic family
1909 device ispfw # Firmware for QLogic HBAs
1910 device mpt # LSI '909 FC adapters
1911 device ncr # NCR/Symbios Logic
1912 device sym # NCR/Symbios Logic (newer chipsets)
1913 device trm # Tekram DC395U/UW/F and DC315U
1917 # ISP_TARGET_MODE - enable target mode operation
1918 #options ISP_TARGET_MODE=1
1920 # Options used in dev/sym/ (Symbios SCSI driver).
1921 #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
1922 # Allows the ncr to take precedence
1923 # 1 (1<<0) -> 810a, 860
1924 # 2 (1<<1) -> 825a, 875, 885, 895
1925 # 4 (1<<2) -> 895a, 896, 1510d
1926 #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
1927 # disabled:0 (default), enabled:1
1928 #options SYM_SETUP_PCI_PARITY #-PCI parity checking
1929 # disabled:0, enabled:1 (default)
1930 #options SYM_SETUP_MAX_LUN #-Number of LUNs supported
1931 # default:8, range:[1..64]
1934 # MII bus support is required for some PCI 10/100 ethernet NICs,
1935 # namely those which use MII-compliant transceivers or implement
1936 # transceiver control interfaces that operate like an MII. Adding
1937 # "device miibus0" to the kernel config pulls in support for
1938 # the generic miibus API and all of the PHY drivers, including a
1939 # generic one for PHYs that aren't specifically handled by an
1940 # individual driver.
1943 # PCI Ethernet NICs that use the common MII bus controller code.
1944 device ale # Atheros AR8121/AR8113/AR8114
1945 device bce # Broadcom NetXtreme II Gigabit Ethernet
1946 device bfe # Broadcom BCM440x 10/100 Ethernet
1947 device dc # DEC/Intel 21143 and various workalikes
1948 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
1949 device my # Myson Fast Ethernet (MTD80X, MTD89X)
1950 device pcn # AMD Am79C97x PCI 10/100 NICs
1951 device re # RealTek 8139C+/8169
1952 device rl # RealTek 8129/8139
1953 device sbsh # Granch SBNI16 SHDSL modem
1954 device sf # Adaptec AIC-6915 (``Starfire'')
1955 device sis # Silicon Integrated Systems SiS 900/SiS 7016
1956 device ste # Sundance ST201 (D-Link DFE-550TX)
1957 device tl # Texas Instruments ThunderLAN
1958 device tx # SMC EtherPower II (83c17x ``EPIC'')
1959 device vge # VIA 612x GigE
1960 device vr # VIA Rhine, Rhine II
1961 device wb # Winbond W89C840F
1962 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
1964 # PCI Ethernet NICs.
1965 device de # DEC/Intel DC21x4x (``Tulip'')
1966 device txp # 3Com 3cR990 (``Typhoon'')
1967 device vx # 3Com 3c590, 3c595 (``Vortex'')
1969 # Gigabit Ethernet NICs.
1970 device bge # Broadcom BCM570x (``Tigon III'')
1971 device em # Intel Pro/1000 (8254x,8257x)
1973 device emx # Intel Pro/1000 (8257{1,2,3,4})
1975 device ig_hal # Intel Pro/1000 hardware abstraction layer
1976 device et # Agere ET1310 10/100/1000 Ethernet
1977 device lge # Level 1 LXT1001 (``Mercury'')
1978 device nfe # nVidia nForce2/3 MCP04/51/55 CK804
1979 device nge # NatSemi DP83820 and DP83821
1980 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
1981 device ti # Alteon (``Tigon I'', ``Tigon II'')
1982 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
1983 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
1984 device jme # JMicron Gigabit/Fast Ethernet
1989 # Brooktree driver has been ported to the new I2C framework. Thus,
1990 # you'll need to have the following 3 lines in the kernel config.
1994 # The iic and smb devices are only needed if you want to control other
1995 # I2C slaves connected to the external connector of some cards.
1998 options BKTR_NEW_MSP34XX_DRIVER
2003 # pccard: pccard slots
2004 # cardbus/cbb: cardbus bridge
2010 # Laptop/Notebook options:
2013 # apm under `Miscellaneous hardware'
2016 # For older notebooks that signal a powerfail condition (external
2017 # power supply dropped, or battery state low) by issuing an NMI:
2019 options POWERFAIL_NMI # make it beep instead of panicing
2024 # System Management Bus support is provided by the 'smbus' device.
2025 # Access to the SMBus device is via the 'smb' device (/dev/smb*),
2026 # which is a child of the 'smbus' device.
2028 # Supported devices:
2029 # smb standard io through /dev/smb*
2031 # Supported SMB interfaces:
2032 # iicsmb I2C to SMB bridge with any iicbus interface
2033 # bktr brooktree848 I2C hardware interface
2034 # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
2035 # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
2036 # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
2037 # viapm VIA VT82C586B,596,686A and VT8233 SMBus controllers
2038 # amdpm AMD 756 Power Management Unit
2040 device smbus # Bus support, required for smb below.
2053 # Philips i2c bus support is provided by the `iicbus' device.
2055 # Supported devices:
2056 # ic i2c network interface
2057 # iic i2c standard io
2058 # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
2060 # Supported interfaces:
2061 # pcf Philips PCF8584 ISA-bus controller
2062 # bktr brooktree848 I2C software interface
2065 # iicbb generic I2C bit-banging code (needed by lpbb, bktr)
2067 device iicbus # Bus support, required for ic/iic/iicsmb below.
2072 device iicsmb # smb over i2c bridge
2074 device pcf0 at isa? port 0x320 irq 5
2076 # Intel Core and newer CPUs on-die digital thermal sensor support
2079 # HW monitoring devices lm(4) and it(4).
2080 device lm0 at isa? port 0x290
2081 device it0 at isa? port 0x290
2082 device it1 at isa? port 0xc00
2083 device it2 at isa? port 0xd00
2085 #---------------------------------------------------------------------------
2088 # See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
2090 # i4b passive ISDN cards support contains the following hardware drivers:
2092 # isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver
2093 # iwic - Winbond W6692 PCI bus ISDN S/T interface controller
2094 # ifpi - AVM Fritz!Card PCI driver
2095 # ifpi2 - AVM Fritz!Card PCI driver Version 2
2096 # ihfc - Cologne Chip HFC ISA/ISA-PnP chipset driver
2097 # ifpnp - AVM Fritz!Card PnP driver
2098 # itjc - Siemens ISAC / TJNet Tiger300/320 chipset
2100 # i4b active ISDN cards support contains the following hardware drivers:
2102 # iavc - AVM B1 PCI, AVM B1 ISA, AVM T1
2104 # Note that the ``options'' (if given) and ``device'' lines must BOTH
2105 # be uncommented to enable support for a given card !
2107 # In addition to a hardware driver (and probably an option) the mandatory
2108 # ISDN protocol stack devices and the mandatory support device must be
2109 # enabled as well as one or more devices from the optional devices section.
2111 #---------------------------------------------------------------------------
2112 # isic driver (Siemens/Infineon chipsets)
2113 #---------------------------------------------------------------------------
2115 # ISA bus non-PnP Cards:
2116 # ----------------------
2118 # Teles S0/8 or Niccy 1008
2120 device isic0 at isa? iomem 0xd0000 irq 5 flags 1
2122 # Teles S0/16 or Creatix ISDN-S0 or Niccy 1016
2124 #device isic0 at isa? port 0xd80 iomem 0xd0000 irq 5 flags 2
2128 #device isic0 at isa? port 0xd80 irq 5 flags 3
2130 # AVM A1 or AVM Fritz!Card
2132 #device isic0 at isa? port 0x340 irq 5 flags 4
2134 # USRobotics Sportster ISDN TA intern
2136 #device isic0 at isa? port 0x268 irq 5 flags 7
2138 # ITK ix1 Micro ( < V.3, non-PnP version )
2140 #device isic0 at isa? port 0x398 irq 10 flags 18
2144 #device isic0 at isa? port 0x360 irq 10 flags 20
2146 # ISA bus PnP Cards:
2147 # ------------------
2150 options TEL_S0_16_3_P
2153 # Creatix ISDN-S0 P&P
2157 # Dr. Neuhaus Niccy Go@
2161 # Sedlbauer Win Speed
2169 # ELSA QuickStep 1000pro ISA
2173 # ITK ix1 Micro ( V.3, PnP version )
2177 # Siemens I-Surf 2.0
2178 options SIEMENS_ISURF2
2181 # Asuscom ISDNlink 128K ISAC
2182 options ASUSCOM_IPAC
2185 # Eicon Diehl DIVA 2.0 and 2.02
2189 # Compaq Microcom 610
2196 # ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
2200 #---------------------------------------------------------------------------
2201 # ifpnp driver for AVM Fritz!Card ISA PnP
2202 #---------------------------------------------------------------------------
2204 # AVM Fritz!Card ISA PnP
2207 #---------------------------------------------------------------------------
2208 # ihfc driver for Cologne Chip ISA chipsets (experimental!)
2209 #---------------------------------------------------------------------------
2211 # Teles 16.3c ISA PnP
2212 # AcerISDN P10 ISA PnP
2213 # TELEINT ISDN SPEED No.1
2216 #---------------------------------------------------------------------------
2217 # ifpi driver for AVM Fritz!Card PCI 1.0 (2.0 unsupported!)
2218 #---------------------------------------------------------------------------
2220 # AVM Fritz!Card PCI 1.0
2223 #---------------------------------------------------------------------------
2224 # ifpi2 driver for AVM Fritz!Card PCI 2.0
2225 #---------------------------------------------------------------------------
2227 # AVM Fritz!Card PCI 2.0
2230 #---------------------------------------------------------------------------
2231 # iwic driver for Winbond W6692 chipset
2232 #---------------------------------------------------------------------------
2234 # ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards)
2237 #---------------------------------------------------------------------------
2238 # itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset
2239 #---------------------------------------------------------------------------
2241 # Traverse Technologies NETjet-S
2245 #---------------------------------------------------------------------------
2246 # iavc driver (AVM active cards, needs i4bcapi driver!)
2247 #---------------------------------------------------------------------------
2249 pseudo-device "i4bcapi" 2
2254 # AVM B1 ISA bus (PnP mode not supported!)
2255 #device iavc0 at isa? port 0x150 irq 5
2258 # ISDN Protocol Stack (mandatory)
2259 # -------------------------------
2261 # Q.921 / layer 2 - i4b passive cards D channel handling
2262 pseudo-device "i4bq921"
2264 # Q.931 / layer 3 - i4b passive cards D channel handling
2265 pseudo-device "i4bq931"
2267 # layer 4 - i4b common passive and active card handling
2273 # userland driver to do ISDN tracing (for passive cards only)
2274 pseudo-device "i4btrc" 4
2276 # userland driver to control the whole thing (mandatory)
2277 pseudo-device "i4bctl"
2279 # userland driver for access to raw B channel
2280 pseudo-device "i4brbch" 4
2282 # userland driver for telephony
2283 pseudo-device "i4btel" 2
2285 # network driver for IP over raw HDLC ISDN
2286 pseudo-device "i4bipr" 4
2287 # enable VJ header compression detection for ipr i/f
2289 # enable logging of the first n IP packets to isdnd (n=32 here)
2292 # network driver for sync PPP over ISDN - requires sppp
2293 pseudo-device "i4bisppp" 4
2298 # Parallel port bus support is provided by the `ppbus' device.
2299 # Multiple devices may be attached to the parallel port, devices
2300 # are automatically probed and attached when found.
2302 # Supported devices:
2303 # vpo Iomega Zip Drive
2304 # Requires SCSI disk support ('scbus' and 'da'); the best
2305 # performance is achieved with ports in EPP 1.9 mode.
2306 # lpt Parallel Printer
2307 # plip Parallel network interface
2308 # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
2309 # pps Pulse per second Timing Interface
2310 # lpbb Philips official parallel port I2C bit-banging interface
2312 # Supported interfaces:
2313 # ppc ISA-bus parallel port interfaces.
2316 options PPC_PROBE_CHIPSET # Enable chipset specific detection
2317 # (see flags in ppc(4))
2318 options DEBUG_1284 # IEEE1284 signaling protocol debug
2319 options PERIPH_1284 # Makes your computer act as a IEEE1284
2320 # compliant peripheral
2321 options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
2322 options VP0_DEBUG # ZIP/ZIP+ debug
2323 options LPT_DEBUG # Printer driver debug
2324 options PPC_DEBUG=2 # Parallel chipset level debug
2325 options PLIP_DEBUG # Parallel network IP interface debug
2326 options PCFCLOCK_VERBOSE # Verbose pcfclock driver
2327 options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
2329 device ppc0 at isa? irq 7
2339 # Kernel BOOTP support
2341 options BOOTP # Use BOOTP to obtain IP address/hostname
2342 options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
2343 options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
2344 options BOOTP_COMPAT # Workaround for broken bootp daemons.
2345 options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2348 # Add tie-ins for a hardware watchdog. This only enable the hooks;
2349 # the user must still supply the actual driver.
2354 # Set the number of PV entries per process. Increasing this can
2355 # stop panics related to heavy use of shared memory. However, that can
2356 # (combined with large amounts of physical memory) cause panics at
2357 # boot time due the kernel running out of VM space.
2359 # If you're tweaking this, you might also want to increase the sysctls
2360 # "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target".
2362 # The value below is the one more than the default.
2364 options PMAP_SHPGPERPROC=201
2367 # Change the size of the kernel virtual address space. Due to
2368 # constraints in loader(8) on i386, this must be a multiple of 4.
2369 # 256 = 1 GB of kernel address space. Increasing this also causes
2370 # a reduction of the address space in user processes. 512 splits
2371 # the 4GB cpu address space in half (2GB user, 2GB kernel).
2373 options KVA_PAGES=260
2376 # Disable swapping. This option removes all code which actually performs
2377 # swapping, so it's not possible to turn it back on at run-time.
2379 # This is sometimes usable for systems which don't have any swap space
2380 # (see also sysctls "vm.defer_swapspace_pageouts" and
2381 # "vm.disable_swapspace_pageouts")
2383 #options NO_SWAPPING
2385 # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
2386 # for sendfile(2) that are used to map file VM pages, and normally
2387 # default to a quantity that is roughly 16*MAXUSERS+512. You would
2388 # typically want about 4 of these for each simultaneous file send.
2390 options NSFBUFS=1024
2392 # Set the size of the buffer cache KVM reservation, in buffers. This is
2393 # scaled by approximately 16384 bytes. The system will auto-size the buffer
2394 # cache if this option is not specified.
2398 # Set the size of the mbuf KVM reservation, in clusters. This is scaled
2399 # by approximately 2048 bytes. The system will auto-size the mbuf area
2400 # to (512 + maxusers*16) if this option is not specified.
2401 # maxusers is in turn computed at boot time depending on available memory
2402 # or set to the value specified by "options MAXUSERS=x" (x=0 means
2404 # So, to take advantage of autoscaling, you have to remove both
2405 # NMBCLUSTERS and MAXUSERS (and NMBUFS) from your kernel config.
2407 options NMBCLUSTERS=1024
2409 # Set the number of mbufs available in the system. Each mbuf
2410 # consumes 256 bytes. The system will autosize this (to 4 times
2411 # the number of NMBCLUSTERS, depending on other constraints)
2412 # if this option is not specified.
2416 # Tune the buffer cache maximum KVA reservation, in bytes. The maximum is
2417 # usually capped at 200 MB, effecting machines with > 1GB of ram. Note
2418 # that the buffer cache only really governs write buffering and disk block
2419 # translations. The VM page cache is our primary disk cache and is not
2420 # effected by the size of the buffer cache.
2422 options VM_BCACHE_SIZE_MAX="(100*1024*1024)"
2424 # Tune the swap zone KVA reservation, in bytes. The default is typically
2425 # 70 MB, giving the system the ability to manage a maximum of 28GB worth
2426 # of swapped out data.
2428 options VM_SWZONE_SIZE_MAX="(50*1024*1024)"
2431 # Enable extra debugging code for locks. This stores the filename and
2432 # line of whatever acquired the lock in the lock itself, and change a
2433 # number of function calls to pass around the relevant data. This is
2434 # not at all useful unless you are debugging lock code. Also note
2435 # that it is likely to break e.g. fstat(1) unless you recompile your
2436 # userland with -DDEBUG_LOCKS as well.
2440 # Set the amount of time (in seconds) the system will wait before
2441 # rebooting automatically when a kernel panic occurs. If set to (-1),
2442 # the system will wait indefinitely until a key is pressed on the
2444 options PANIC_REBOOT_WAIT_TIME=16
2446 # Attempt to bypass the buffer cache and put data directly into the
2447 # userland buffer for read operation when O_DIRECT flag is set on the
2448 # file. Both offset and length of the read operation must be
2449 # multiples of the physical media sector size.
2453 # Specify a lower limit for the number of swap I/O buffers. They are
2454 # (among other things) used when bypassing the buffer cache due to
2455 # DIRECTIO kernel option enabled and O_DIRECT flag set on file.
2457 #options NSWBUF_MIN=120
2459 # The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
2460 # controllers (SmartRAID V and VI and later).
2461 # These controllers require the CAM infrastructure.
2465 # The 'dpt' driver provides support for DPT controllers (http://www.dpt.com/).
2466 # These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
2467 # The DPT controllers are commonly re-licensed under other brand-names -
2468 # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
2469 # Compaq are actually DPT controllers.
2471 # See src/sys/dev/raid/dpt for debugging and other subtle options.
2472 # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
2473 # instruments are enabled. The tools in
2474 # /usr/sbin/dpt_* assume these to be enabled.
2475 # DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
2476 # If you ant the driver to handle timeouts, enable
2477 # this option. If your system is very busy, this
2478 # option will create more trouble than solve.
2479 # DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
2480 # wait when timing out with the above option.
2481 # DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/raid/dpt.h
2482 # DPT_LOST_IRQ When enabled, will try, once per second, to catch
2483 # any interrupt that got lost. Seems to help in some
2484 # DPT-firmware/Motherboard combinations. Minimal
2485 # cost, great benefit.
2486 # DPT_RESET_HBA Make "reset" actually reset the controller
2487 # instead of fudging it. Only enable this if you
2488 # are 100% certain you need it.
2493 #!CAM# options DPT_MEASURE_PERFORMANCE
2494 #!CAM# options DPT_HANDLE_TIMEOUTS
2495 options DPT_TIMEOUT_FACTOR=4
2496 options DPT_LOST_IRQ
2497 options DPT_RESET_HBA
2500 # Compaq "CISS" RAID controllers (SmartRAID 5* series)
2501 # These controllers have a SCSI-like interface, and require the
2502 # CAM infrastructure.
2507 # Intel Integrated RAID controllers.
2508 # This driver is supported and maintained by
2509 # "Leubner, Achim" <Achim_Leubner@adaptec.com>.
2514 # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
2515 # firmware. These controllers have a SCSI-like interface, and require
2516 # the CAM infrastructure.
2527 # General USB code (mandatory for USB)
2532 # Generic USB device driver
2534 # Human Interface Device (anything with buttons and dials)
2540 # USB Iomega Zip 100 Drive (Requires scbus and da)
2546 # USB Rio (MP3 Player)
2566 # ADMtek USB ethernet. Supports the LinkSys USB100TX,
2567 # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2568 # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2572 # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
2573 # LinkSys USB200M and various other adapters.
2576 # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
2577 # and Netmate II, and the Belkin F5U111.
2580 # Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2581 # Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2582 # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
2583 # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
2584 # and 2104USB, and the Corega USB-T.
2587 # RealTek 8150 based USB ethernet device:
2589 # GREEN HOUSE GH-USB100B
2590 # Billionton ThumbLAN USBKR2-100B
2593 # USB wireless NICs, requires wlan_ratectl_onoe
2595 # Ralink Technology RT2501USB/RT2601USB
2598 # Ralink Technology RT2500USB
2601 # debugging options for the USB subsystem
2606 options UKBD_DFLT_KEYMAP # specify the built-in keymap
2607 makeoptions UKBD_DFLT_KEYMAP=it.iso
2610 device firewire # Firewire bus code
2611 device sbp # SCSI over Firewire (Requires scbus and da)
2612 device fwe # Ethernet over Firewire (non-standard!)
2614 # dcons support (Dumb Console Device)
2615 device dcons # dumb console driver
2616 device dcons_crom # FireWire attachment
2617 options DCONS_BUF_SIZE=16384 # buffer size
2618 options DCONS_POLL_HZ=100 # polling rate
2619 options DCONS_FORCE_CONSOLE=1 # force to be the primary console
2620 options DCONS_FORCE_GDB=1 # force to be the gdb device
2622 #####################################################################
2625 # This is a port of the openbsd crypto framework. Include this when
2626 # configuring IPsec and when you have a h/w crypto device to accelerate
2627 # user applications that link to openssl.
2629 # Drivers are ports from openbsd with some simple enhancements that have
2630 # been fed back to openbsd (and hopefully will be included).
2632 pseudo-device crypto # core crypto support
2633 pseudo-device cryptodev # /dev/crypto for access to h/w
2635 device rndtest # FIPS 140-2 entropy tester
2637 device hifn # Hifn 7951, 7781, etc.
2638 options HIFN_DEBUG # enable debugging support: hw.hifn.debug
2639 #options HIFN_NO_RNG # for devices without RNG
2640 options HIFN_RNDTEST # enable rndtest support
2642 device ubsec # Broadcom 5501, 5601, 58xx
2643 options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
2644 #options UBSEC_NO_RNG # for devices without RNG
2645 options UBSEC_RNDTEST # enable rndtest support
2647 device acpi # basic ACPI support
2648 device acpi_asus # Asus laptop support
2649 device acpi_thinkpad # ThinkPad support
2650 device acpi_toshiba # Toshiba laptop support
2651 device acpi_video # ACPI video extensions
2652 device pmtimer # adjust the system clock after resume
2655 # drm: General DRM code
2656 # i915drm: Intel i830, i845, i915, i945, i965, G33/35
2657 # mach64drm: ATI Mach64 cards - Rage and 3D Rage series
2658 # mgadrm: AGP Matrox G200, G400, G450, G550
2659 # r128drm: ATI Rage 128 cards
2660 # radeondrm: ATI Radeon cards
2661 # savagedrm: Savage cards
2663 # tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee
2665 # DRM_DEBUG: include debug printfs, very slow
2667 # DRM requires AGP in the kernel.
2685 device cmx # Omnikey CardMan 4040 smartcard reader
2688 # Embedded system options:
2690 # An embedded system might want to run something other than init.
2691 options INIT_PATH="/sbin/init:/sbin/oinit"
2694 options BUS_DEBUG # enable newbus debugging
2695 options NPX_DEBUG # enable npx debugging (FPU/math emu)
2697 # Record the program counter of the code interrupted by the statistics
2698 # clock interrupt. Use pctrack(8) to dump this information.
2699 options DEBUG_PCTRACK
2701 # More undocumented options for linting.
2702 # Note that documenting these are not considered an affront.
2705 #options ACPI_NO_SEMAPHORES
2706 options ACPI_QUIRK_VMWARE
2707 options AHC_DUMP_EEPROM
2708 #options BKTR_ALLOC_PAGES=xxx
2709 options CAM_DEBUG_DELAY
2710 options CLUSTERDEBUG
2711 options COMPAT_LINUX
2712 options COMPAT_SUNOS
2714 options DEBUG_CRIT_SECTIONS
2715 options DEBUG_INTERRUPTS
2716 #options DISABLE_PSE
2718 options BCE_NVRAM_WRITE_SUPPORT
2719 #options ED_NO_MIIBUS
2720 options ENABLE_ALART
2722 options FB_INSTALL_CDEV
2723 options FE_8BIT_SUPPORT
2724 options I4B_SMP_WORKAROUND
2725 options I586_PMC_GUPROF=0x70000
2726 options KBDIO_DEBUG=10
2727 options KBD_MAXRETRY=4
2728 options KBD_MAXWAIT=6
2729 options KBD_RESETDELAY=201
2730 options KERN_TIMESTAMP
2735 #options MAXFILES=xxx
2737 options METEOR_TEST_VIDEO
2738 options NETATALKDEBUG
2741 options SCSI_NCR_DEBUG
2742 options SCSI_NCR_MAX_SYNC=10000
2743 options SCSI_NCR_MAX_WIDE=1
2744 options SCSI_NCR_MYADDR=7
2745 options SHOW_BUSYBUFS # List buffers that prevent root unmount
2746 options SIMPLELOCK_DEBUG
2748 options SLIP_IFF_OPTS
2749 options SOCKBUF_DEBUG
2750 options TIMER_FREQ="((14318182+6)/12)"
2751 options VFS_BIO_DEBUG
2752 options WI_SYMBOL_FIRMWARE
2756 #options KTR_ETHERNET
2757 #options KTR_GIANT_CONTENTION
2762 #options KTR_IF_START
2765 #options KTR_KERNENTRY
2767 #options KTR_POLLING
2768 #options KTR_SERIALIZER
2769 #options KTR_SPIN_CONTENTION
2770 #options KTR_TESTLOG
2772 #options KTR_USB_MEMORY
2774 options KTR_ENTRIES=1024
2775 options KTR_VERBOSE=1
2778 options ALTQ #alternate queueing
2779 options ALTQ_CBQ #class based queueing
2780 options ALTQ_RED #random early detection
2781 options ALTQ_RIO #triple red for diffserv (needs RED)
2782 options ALTQ_HFSC #hierarchical fair service curve
2783 options ALTQ_PRIQ #priority queue
2784 options ALTQ_FAIRQ #fair queue
2785 #options ALTQ_NOPCC #don't use processor cycle counter
2786 options ALTQ_DEBUG #for debugging
2787 # you might want to set kernel timer to 1kHz if you use CBQ,
2788 # especially with 100baseT
2794 options SCTP_USE_ADLER32
2795 options SCTP_HIGH_SPEED
2796 options SCTP_STAT_LOGGING
2797 options SCTP_CWND_LOGGING
2798 options SCTP_BLK_LOGGING
2799 options SCTP_STR_LOGGING
2800 options SCTP_FR_LOGGING
2801 options SCTP_MAP_LOGGING
2803 # Serializer profiling
2804 options PROFILE_SERIALIZER