2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 3 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program. If not, see <http://www.gnu.org/licenses/>.
29 /* logged when starting the various Samba daemons */
30 #define COPYRIGHT_STARTUP_MESSAGE "Copyright Andrew Tridgell and the Samba Team 1992-2009"
33 #if defined(LARGE_SMB_OFF_T)
34 #define BUFFER_SIZE (128*1024)
35 #else /* no large readwrite possible */
36 #define BUFFER_SIZE (0xFFFF)
39 #define SAFETY_MARGIN 1024
40 #define LARGE_WRITEX_HDR_SIZE 65
43 #define DGRAM_PORT 138
46 #define SMB_PORTS "445 139"
48 #define Undefined (-1)
56 #ifndef DEF_CREATE_MASK
57 #define DEF_CREATE_MASK (0755)
60 /* string manipulation flags - see clistr.c and srvstr.c */
61 #define STR_TERMINATE 1
65 #define STR_NOALIGN 16
66 #define STR_TERMINATE_ASCII 128
68 /* how long to wait for secondary SMB packets (milli-seconds) */
69 #define SMB_SECONDARY_WAIT (60*1000)
74 /* this defines the error codes that receive_smb can put in smb_read_error */
75 enum smb_read_errors
{
80 SMB_WRITE_ERROR
, /* This error code can go into the client smb_rw_error. */
83 SMB_DO_NOT_DO_TDIS
, /* cli_close_connection() check for this when smbfs wants to keep tree connected */
87 #define DIR_STRUCT_SIZE 43
89 /* these define the attribute byte as seen by DOS */
90 #define aRONLY (1L<<0) /* 0x01 */
91 #define aHIDDEN (1L<<1) /* 0x02 */
92 #define aSYSTEM (1L<<2) /* 0x04 */
93 #define aVOLID (1L<<3) /* 0x08 */
94 #define aDIR (1L<<4) /* 0x10 */
95 #define aARCH (1L<<5) /* 0x20 */
106 #define DOS_OPEN_RDONLY 0
107 #define DOS_OPEN_WRONLY 1
108 #define DOS_OPEN_RDWR 2
109 #define DOS_OPEN_EXEC 3
110 #define DOS_OPEN_FCB 0xF
112 /* define shifts and masks for share and open modes. */
113 #define OPENX_MODE_MASK 0xF
114 #define DENY_MODE_SHIFT 4
115 #define DENY_MODE_MASK 0x7
116 #define GET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
117 #define SET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
118 #define GET_DENY_MODE(x) (((x)>>DENY_MODE_SHIFT) & DENY_MODE_MASK)
119 #define SET_DENY_MODE(x) (((x) & DENY_MODE_MASK) <<DENY_MODE_SHIFT)
121 /* Sync on open file (not sure if used anymore... ?) */
122 #define FILE_SYNC_OPENMODE (1<<14)
123 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
125 /* open disposition values */
126 #define OPENX_FILE_EXISTS_FAIL 0
127 #define OPENX_FILE_EXISTS_OPEN 1
128 #define OPENX_FILE_EXISTS_TRUNCATE 2
130 /* mask for open disposition. */
131 #define OPENX_FILE_OPEN_MASK 0x3
133 #define GET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
134 #define SET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
136 /* The above can be OR'ed with... */
137 #define OPENX_FILE_CREATE_IF_NOT_EXIST 0x10
138 #define OPENX_FILE_FAIL_IF_NOT_EXIST 0
140 #include "../libcli/util/doserr.h"
142 typedef union unid_t
{
148 * SMB UCS2 (16-bit unicode) internal type.
149 * smb_ucs2_t is *always* in little endian format.
152 #ifdef WORDS_BIGENDIAN
158 /* turn a 7 bit character into a ucs2 character */
159 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
161 /* return an ascii version of a ucs2 character */
162 #define UCS2_TO_CHAR(c) (((c) >> UCS2_SHIFT) & 0xff)
164 /* Copy into a smb_ucs2_t from a possibly unaligned buffer. Return the copied smb_ucs2_t */
165 #define COPY_UCS2_CHAR(dest,src) (((unsigned char *)(dest))[0] = ((unsigned char *)(src))[0],\
166 ((unsigned char *)(dest))[1] = ((unsigned char *)(src))[1], (dest))
168 /* pipe string names */
169 #define PIPE_LANMAN "\\PIPE\\LANMAN"
171 #define MAX_HOURS_LEN 32
174 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
177 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
179 #define LOOKUP_NAME_NONE 0x00000000
180 #define LOOKUP_NAME_ISOLATED 0x00000001 /* Look up unqualified names */
181 #define LOOKUP_NAME_REMOTE 0x00000002 /* Ask others */
182 #define LOOKUP_NAME_GROUP 0x00000004 /* (unused) This is a NASTY hack for
183 valid users = @foo where foo also
184 exists in as user. */
185 #define LOOKUP_NAME_EXPLICIT 0x00000008 /* Only include
186 explicitly mapped names and not
187 the Unix {User,Group} domain */
188 #define LOOKUP_NAME_BUILTIN 0x00000010 /* builtin names */
189 #define LOOKUP_NAME_WKN 0x00000020 /* well known names */
190 #define LOOKUP_NAME_DOMAIN 0x00000040 /* only lookup own domain */
191 #define LOOKUP_NAME_LOCAL (LOOKUP_NAME_ISOLATED\
192 |LOOKUP_NAME_BUILTIN\
195 #define LOOKUP_NAME_ALL (LOOKUP_NAME_ISOLATED\
197 |LOOKUP_NAME_BUILTIN\
202 * @brief Security Identifier
204 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
206 typedef struct dom_sid DOM_SID
;
216 ID_TYPE_NOT_SPECIFIED
= 0,
229 enum id_mapping status
;
232 #include "librpc/gen_ndr/misc.h"
233 #include "librpc/gen_ndr/security.h"
234 #include "librpc/ndr/libndr.h"
235 #include "librpc/gen_ndr/lsa.h"
236 #include "librpc/gen_ndr/dfs.h"
237 #include "librpc/gen_ndr/winreg.h"
238 #include "librpc/gen_ndr/initshutdown.h"
239 #include "librpc/gen_ndr/eventlog.h"
240 #include "librpc/gen_ndr/srvsvc.h"
241 #include "librpc/gen_ndr/wkssvc.h"
242 #include "librpc/gen_ndr/echo.h"
243 #include "librpc/gen_ndr/svcctl.h"
244 #include "librpc/gen_ndr/netlogon.h"
245 #include "librpc/gen_ndr/samr.h"
246 #include "librpc/gen_ndr/dssetup.h"
247 #include "librpc/gen_ndr/epmapper.h"
248 #include "librpc/gen_ndr/libnet_join.h"
249 #include "librpc/gen_ndr/krb5pac.h"
250 #include "librpc/gen_ndr/ntsvcs.h"
251 #include "librpc/gen_ndr/nbt.h"
252 #include "librpc/gen_ndr/drsuapi.h"
253 #include "librpc/gen_ndr/drsblobs.h"
254 #include "librpc/gen_ndr/spoolss.h"
255 #include "librpc/gen_ndr/dcerpc.h"
256 #include "librpc/gen_ndr/ndr_dcerpc.h"
258 struct lsa_dom_info
{
266 struct lsa_name_info
{
268 enum lsa_SidType type
;
273 /* Some well-known SIDs */
274 extern const DOM_SID global_sid_World_Domain
;
275 extern const DOM_SID global_sid_World
;
276 extern const DOM_SID global_sid_Creator_Owner_Domain
;
277 extern const DOM_SID global_sid_NT_Authority
;
278 extern const DOM_SID global_sid_System
;
279 extern const DOM_SID global_sid_NULL
;
280 extern const DOM_SID global_sid_Authenticated_Users
;
281 extern const DOM_SID global_sid_Network
;
282 extern const DOM_SID global_sid_Creator_Owner
;
283 extern const DOM_SID global_sid_Creator_Group
;
284 extern const DOM_SID global_sid_Anonymous
;
285 extern const DOM_SID global_sid_Builtin
;
286 extern const DOM_SID global_sid_Builtin_Administrators
;
287 extern const DOM_SID global_sid_Builtin_Users
;
288 extern const DOM_SID global_sid_Builtin_Guests
;
289 extern const DOM_SID global_sid_Builtin_Power_Users
;
290 extern const DOM_SID global_sid_Builtin_Account_Operators
;
291 extern const DOM_SID global_sid_Builtin_Server_Operators
;
292 extern const DOM_SID global_sid_Builtin_Print_Operators
;
293 extern const DOM_SID global_sid_Builtin_Backup_Operators
;
294 extern const DOM_SID global_sid_Builtin_Replicator
;
295 extern const DOM_SID global_sid_Builtin_PreWin2kAccess
;
296 extern const DOM_SID global_sid_Unix_Users
;
297 extern const DOM_SID global_sid_Unix_Groups
;
300 * The complete list of SIDS belonging to this user.
301 * Created when a vuid is registered.
302 * The definition of the user_sids array is as follows :
304 * token->user_sids[0] = primary user SID.
305 * token->user_sids[1] = primary group SID.
306 * token->user_sids[2..num_sids] = supplementary group SIDS.
309 #define PRIMARY_USER_SID_INDEX 0
310 #define PRIMARY_GROUP_SID_INDEX 1
312 typedef struct nt_user_token
{
318 typedef struct unix_user_token
{
325 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
326 typedef struct time_info
{
330 typedef struct write_cache
{
338 #include "fake_file.h"
343 uint64_t position_information
;
345 uint32 private_options
; /* NT Create options, but we only look at
346 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
347 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB (Except
348 * for print files *only*, where
349 * DELETE_ON_CLOSE is not stored in the share
352 unsigned long gen_id
;
356 struct share_mode_entry
;
361 struct rpc_cli_smbd_conn
;
362 struct fncall_context
;
364 struct vfs_fsp_data
{
365 struct vfs_fsp_data
*next
;
366 struct vfs_handle_struct
*owner
;
367 void (*destroy
)(void *p_data
);
369 /* NOTE: This structure contains four pointers so that we can guarantee
370 * that the end of the structure is always both 4-byte and 8-byte aligned.
374 /* the basic packet size, assuming no words or bytes */
377 struct notify_change
{
382 struct notify_mid_map
;
385 struct notify_change_request
;
386 struct sys_notify_backend
;
387 struct sys_notify_context
{
388 struct event_context
*ev
;
389 struct connection_struct
*conn
;
390 void *private_data
; /* For use by the system backend */
393 struct notify_change_buf
{
395 * If no requests are pending, changes are queued here. Simple array,
400 * num_changes == -1 means that we have got a catch-all change, when
401 * asked we just return NT_STATUS_OK without specific changes.
404 struct notify_change
*changes
;
407 * If no changes are around requests are queued here. Using a linked
408 * list, because we have to append at the end and delete from the top.
410 struct notify_change_request
*requests
;
413 typedef struct files_struct
{
414 struct files_struct
*next
, *prev
;
416 struct connection_struct
*conn
;
417 struct fd_handle
*fh
;
418 unsigned int num_smb_operations
;
419 uint16 rap_print_jobid
;
420 struct file_id file_id
;
421 uint64_t initial_allocation_size
; /* Faked up initial allocation on disk. */
426 struct timeval open_time
;
427 uint32 access_mask
; /* NTCreateX access bits (FILE_READ_DATA etc.) */
428 uint32 share_access
; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
430 bool update_write_time_triggered
;
431 struct timed_event
*update_write_time_event
;
432 bool update_write_time_on_close
;
433 struct timespec close_write_time
;
434 bool write_time_forced
;
437 int sent_oplock_break
;
438 struct timed_event
*oplock_timeout
;
439 struct lock_struct last_lock_failure
;
440 int current_lock_count
; /* Count the number of outstanding locks and pending locks. */
442 struct share_mode_entry
*pending_break_messages
;
443 int num_pending_break_messages
;
451 bool aio_write_behind
;
453 bool initial_delete_on_close
; /* Only set at NTCreateX if file was created. */
457 struct vfs_fsp_data
*vfs_extension
;
458 struct fake_file_handle
*fake_file_handle
;
460 struct notify_change_buf
*notify
;
462 struct files_struct
*base_fsp
; /* placeholder for delete on close */
465 #include "ntquotas.h"
466 #include "sysquotas.h"
468 struct vuid_cache_entry
{
469 struct auth_serversupplied_info
*server_info
;
476 unsigned int next_entry
;
477 struct vuid_cache_entry array
[VUID_CACHE_SIZE
];
483 } name_compare_entry
;
486 struct trans_state
*next
, *prev
;
490 uint32 max_param_return
;
491 uint32 max_data_return
;
492 uint32 max_setup_return
;
494 uint8 cmd
; /* SMBtrans or SMBtrans2 */
496 char *name
; /* for trans requests */
497 uint16 call
; /* for trans2 and nttrans requests */
499 bool close_on_completion
;
502 unsigned int setup_count
;
505 size_t received_data
;
506 size_t received_param
;
516 * Info about an alternate data stream
519 struct stream_struct
{
521 SMB_OFF_T alloc_size
;
525 /* Include VFS stuff */
527 #include "smb_acls.h"
530 struct dfree_cached_info
{
531 time_t last_dfree_time
;
540 struct share_params
{
544 struct share_iterator
{
548 typedef struct connection_struct
{
549 struct connection_struct
*next
, *prev
;
550 unsigned cnum
; /* an index passed over the wire */
551 struct share_params
*params
;
553 bool force_recheck_perm
;
554 struct vuid_cache vuid_cache
;
555 struct dptr_struct
*dirptr
;
558 bool read_only
; /* Attributes for the current user of the share. */
559 bool admin_user
; /* Attributes for the current user of the share. */
564 struct vfs_ops vfs
; /* Filesystem operations */
565 struct vfs_ops vfs_opaque
; /* OPAQUE Filesystem operations */
566 struct vfs_handle_struct
*vfs_handles
; /* for the new plugins */
569 * This represents the user information on this connection. Depending
570 * on the vuid using this tid, this might change per SMB request.
572 struct auth_serversupplied_info
*server_info
;
575 * If the "force group" parameter is set, this is the primary gid that
576 * may be used in the users token, depending on the vuid using this tid.
578 gid_t force_group_gid
;
580 char client_address
[INET6_ADDRSTRLEN
]; /* String version of client IP address. */
582 uint16 vuid
; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
585 time_t lastused_count
;
588 unsigned int num_smb_operations
; /* Count of smb operations on this tree. */
592 /* Semantics requested by the client or forced by the server config. */
595 bool short_case_preserve
;
597 /* Semantics provided by the underlying filesystem. */
600 name_compare_entry
*hide_list
; /* Per-share list of files to return as hidden. */
601 name_compare_entry
*veto_list
; /* Per-share list of files to veto (never show). */
602 name_compare_entry
*veto_oplock_list
; /* Per-share list of files to refuse oplocks on. */
603 name_compare_entry
*aio_write_behind_list
; /* Per-share list of files to use aio write behind on. */
604 struct dfree_cached_info
*dfree_info
;
605 struct trans_state
*pending_trans
;
606 struct notify_context
*notify_ctx
;
609 struct current_user
{
610 connection_struct
*conn
;
613 NT_USER_TOKEN
*nt_user_token
;
632 * Async handling in the main smb processing loop is directed by
633 * outbuf: reply_xxx routines indicate sync behaviour by putting their
634 * reply into "outbuf". If they leave it as NULL, they take of it
635 * themselves, possibly later.
637 * If async handling is wanted, the reply_xxx routine must make sure
638 * that it talloc_move()s the smb_req somewhere else.
644 connection_struct
*conn
;
645 struct smb_perfcount_data pcd
;
648 * Chained request handling
650 struct files_struct
*chain_fsp
;
653 * Here we collect the outbufs from the chain handlers
655 uint8_t *chain_outbuf
;
658 * state information for async smb handling
663 /* Defines for the sent_oplock_break field above. */
664 #define NO_BREAK_SENT 0
665 #define BREAK_TO_NONE_SENT 1
666 #define LEVEL_II_BREAK_SENT 2
669 fstring smb_name
; /* user name from the client */
670 fstring unix_name
; /* unix user name of a validated user */
671 fstring domain
; /* domain that the client specified */
674 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
676 enum {LPQ_QUEUED
=0,LPQ_PAUSED
,LPQ_SPOOLING
,LPQ_PRINTING
,LPQ_ERROR
,LPQ_DELETING
,
677 LPQ_OFFLINE
,LPQ_PAPEROUT
,LPQ_PRINTED
,LPQ_DELETED
,LPQ_BLOCKED
,LPQ_USER_INTERVENTION
};
679 typedef struct _print_queue_struct
{
680 int job
; /* normally the UNIX jobid -- see note in
681 printing.c:traverse_fn_delete() */
689 } print_queue_struct
;
691 enum {LPSTAT_OK
, LPSTAT_STOPPED
, LPSTAT_ERROR
};
697 } print_status_struct
;
699 /* used for server information: client, nameserv and ipc */
700 struct server_info_struct
{
704 fstring domain
; /* used ONLY in ipc.c NOT namework.c */
705 bool server_added
; /* used ONLY in ipc.c NOT namework.c */
708 /* used for network interfaces */
710 struct interface
*next
, *prev
;
713 struct sockaddr_storage ip
;
714 struct sockaddr_storage netmask
;
715 struct sockaddr_storage bcast
;
718 /* Internal message queue for deferred opens. */
719 struct pending_message_list
{
720 struct pending_message_list
*next
, *prev
;
721 struct timeval request_time
; /* When was this first issued? */
722 struct timed_event
*te
;
723 struct smb_perfcount_data pcd
;
727 DATA_BLOB private_data
;
730 #define SHARE_MODE_FLAG_POSIX_OPEN 0x1
732 /* struct returned by get_share_modes */
733 struct share_mode_entry
{
734 struct server_id pid
;
737 uint32 access_mask
; /* NTCreateX access bits (FILE_READ_DATA etc.) */
738 uint32 share_access
; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
739 uint32 private_options
; /* NT Create options, but we only look at
740 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
741 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB for
742 * smbstatus and swat */
745 unsigned long share_file_id
;
746 uint32 uid
; /* uid of file opener. */
747 uint16 flags
; /* See SHARE_MODE_XX above. */
750 /* oplock break message definition - linearization of share_mode_entry.
753 0 struct server_id pid 4
756 8 uint32 access_mask 4
757 12 uint32 share_access 4
758 16 uint32 private_options 4
760 24 uint32 time usec 4
761 28 uint64 dev 8 bytes
762 36 uint64 inode 8 bytes
763 44 uint64 extid 8 bytes
764 52 unsigned long file_id 4 bytes
765 56 uint32 uid 4 bytes
766 60 uint16 flags 2 bytes
770 #ifdef CLUSTER_SUPPORT
771 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 66
773 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 62
776 struct share_mode_lock
{
777 const char *servicepath
; /* canonicalized. */
778 const char *base_name
;
779 const char *stream_name
;
782 struct share_mode_entry
*share_modes
;
783 UNIX_USER_TOKEN
*delete_token
;
784 bool delete_on_close
;
785 struct timespec old_write_time
;
786 struct timespec changed_write_time
;
789 struct db_record
*record
;
793 * Internal structure of locking.tdb share mode db.
794 * Used by locking.c and libsmbsharemodes.c
797 struct locking_data
{
800 int num_share_mode_entries
;
801 bool delete_on_close
;
802 struct timespec old_write_time
;
803 struct timespec changed_write_time
;
804 uint32 delete_token_size
; /* Only valid if either of
805 the two previous fields
808 struct share_mode_entry dummy
; /* Needed for alignment. */
810 /* The following four entries are implicit
811 struct share_mode_entry modes[num_share_mode_entries];
812 char unix_token[delete_token_size] (divisible by 4).
818 /* Used to store pipe open records for NetFileEnum() */
820 struct pipe_open_rec
{
821 struct server_id pid
;
828 #define NT_HASH_LEN 16
829 #define LM_HASH_LEN 16
831 /* Password history contants. */
832 #define PW_HISTORY_SALT_LEN 16
833 #define SALTED_MD5_HASH_LEN 16
834 #define PW_HISTORY_ENTRY_LEN (PW_HISTORY_SALT_LEN+SALTED_MD5_HASH_LEN)
835 #define MAX_PW_HISTORY_LEN 24
838 * Flags for local user manipulation.
841 #define LOCAL_ADD_USER 0x1
842 #define LOCAL_DELETE_USER 0x2
843 #define LOCAL_DISABLE_USER 0x4
844 #define LOCAL_ENABLE_USER 0x8
845 #define LOCAL_TRUST_ACCOUNT 0x10
846 #define LOCAL_SET_NO_PASSWORD 0x20
847 #define LOCAL_SET_PASSWORD 0x40
848 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
849 #define LOCAL_INTERDOM_ACCOUNT 0x100
850 #define LOCAL_AM_ROOT 0x200 /* Act as root */
852 /* key and data in the connections database - used in smbstatus and smbd */
853 struct connections_key
{
854 struct server_id pid
;
859 struct connections_data
{
861 struct server_id pid
;
865 char servicename
[FSTRING_LEN
];
867 char machine
[FSTRING_LEN
];
869 uint32 bcast_msg_flags
;
873 /* the following are used by loadparm for option lists */
875 P_BOOL
,P_BOOLREV
,P_CHAR
,P_INTEGER
,P_OCTAL
,P_LIST
,
876 P_STRING
,P_USTRING
,P_ENUM
,P_SEP
880 P_LOCAL
,P_GLOBAL
,P_SEPARATOR
,P_NONE
893 bool (*special
)(int snum
, const char *, char **);
894 const struct enum_list
*enum_list
;
905 /* The following flags are used in SWAT */
906 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
907 #define FLAG_SHARE 0x0002 /* file sharing options */
908 #define FLAG_PRINT 0x0004 /* printing options */
909 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
910 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
911 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
912 #define FLAG_DEVELOPER 0x0040 /* No longer used */
913 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
914 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
915 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
916 #define FLAG_META 0x8000 /* A meta directive - not a real parameter */
923 /* offsets into message for common items */
930 #define smb_pidhigh 16
931 #define smb_ss_field 18
957 /* flag defines. CIFS spec 3.1.1 */
958 #define FLAG_SUPPORT_LOCKREAD 0x01
959 #define FLAG_CLIENT_BUF_AVAIL 0x02
960 #define FLAG_RESERVED 0x04
961 #define FLAG_CASELESS_PATHNAMES 0x08
962 #define FLAG_CANONICAL_PATHNAMES 0x10
963 #define FLAG_REQUEST_OPLOCK 0x20
964 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
965 #define FLAG_REPLY 0x80
968 #define SMBmkdir 0x00 /* create directory */
969 #define SMBrmdir 0x01 /* delete directory */
970 #define SMBopen 0x02 /* open file */
971 #define SMBcreate 0x03 /* create file */
972 #define SMBclose 0x04 /* close file */
973 #define SMBflush 0x05 /* flush file */
974 #define SMBunlink 0x06 /* delete file */
975 #define SMBmv 0x07 /* rename file */
976 #define SMBgetatr 0x08 /* get file attributes */
977 #define SMBsetatr 0x09 /* set file attributes */
978 #define SMBread 0x0A /* read from file */
979 #define SMBwrite 0x0B /* write to file */
980 #define SMBlock 0x0C /* lock byte range */
981 #define SMBunlock 0x0D /* unlock byte range */
982 #define SMBctemp 0x0E /* create temporary file */
983 #define SMBmknew 0x0F /* make new file */
984 #define SMBcheckpath 0x10 /* check directory path */
985 #define SMBexit 0x11 /* process exit */
986 #define SMBlseek 0x12 /* seek */
987 #define SMBtcon 0x70 /* tree connect */
988 #define SMBtconX 0x75 /* tree connect and X*/
989 #define SMBtdis 0x71 /* tree disconnect */
990 #define SMBnegprot 0x72 /* negotiate protocol */
991 #define SMBdskattr 0x80 /* get disk attributes */
992 #define SMBsearch 0x81 /* search directory */
993 #define SMBsplopen 0xC0 /* open print spool file */
994 #define SMBsplwr 0xC1 /* write to print spool file */
995 #define SMBsplclose 0xC2 /* close print spool file */
996 #define SMBsplretq 0xC3 /* return print queue */
997 #define SMBsends 0xD0 /* send single block message */
998 #define SMBsendb 0xD1 /* send broadcast message */
999 #define SMBfwdname 0xD2 /* forward user name */
1000 #define SMBcancelf 0xD3 /* cancel forward */
1001 #define SMBgetmac 0xD4 /* get machine name */
1002 #define SMBsendstrt 0xD5 /* send start of multi-block message */
1003 #define SMBsendend 0xD6 /* send end of multi-block message */
1004 #define SMBsendtxt 0xD7 /* send text of multi-block message */
1006 /* Core+ protocol */
1007 #define SMBlockread 0x13 /* Lock a range and read */
1008 #define SMBwriteunlock 0x14 /* Unlock a range then write */
1009 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
1010 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
1011 #define SMBwritec 0x20 /* secondary write request */
1012 #define SMBwriteclose 0x2c /* write a file then close it */
1014 /* dos extended protocol */
1015 #define SMBreadBraw 0x1A /* read block raw */
1016 #define SMBreadBmpx 0x1B /* read block multiplexed */
1017 #define SMBreadBs 0x1C /* read block (secondary response) */
1018 #define SMBwriteBraw 0x1D /* write block raw */
1019 #define SMBwriteBmpx 0x1E /* write block multiplexed */
1020 #define SMBwriteBs 0x1F /* write block (secondary request) */
1021 #define SMBwriteC 0x20 /* write complete response */
1022 #define SMBsetattrE 0x22 /* set file attributes expanded */
1023 #define SMBgetattrE 0x23 /* get file attributes expanded */
1024 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
1025 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
1026 #define SMBtranss 0x26 /* transaction (secondary request/response) */
1027 #define SMBioctl 0x27 /* IOCTL */
1028 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
1029 #define SMBcopy 0x29 /* copy */
1030 #define SMBmove 0x2A /* move */
1031 #define SMBecho 0x2B /* echo */
1032 #define SMBopenX 0x2D /* open and X */
1033 #define SMBreadX 0x2E /* read and X */
1034 #define SMBwriteX 0x2F /* write and X */
1035 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
1036 #define SMBffirst 0x82 /* find first */
1037 #define SMBfunique 0x83 /* find unique */
1038 #define SMBfclose 0x84 /* find close */
1039 #define SMBkeepalive 0x85 /* keepalive */
1040 #define SMBinvalid 0xFE /* invalid command */
1042 /* Extended 2.0 protocol */
1043 #define SMBtrans2 0x32 /* TRANS2 protocol set */
1044 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
1045 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
1046 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
1047 #define SMBulogoffX 0x74 /* user logoff */
1049 /* NT SMB extensions. */
1050 #define SMBnttrans 0xA0 /* NT transact */
1051 #define SMBnttranss 0xA1 /* NT transact secondary */
1052 #define SMBntcreateX 0xA2 /* NT create and X */
1053 #define SMBntcancel 0xA4 /* NT cancel */
1054 #define SMBntrename 0xA5 /* NT rename */
1056 /* These are the trans subcommands */
1057 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
1058 #define TRANSACT_DCERPCCMD 0x26
1059 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
1061 /* These are the TRANS2 sub commands */
1062 #define TRANSACT2_OPEN 0x00
1063 #define TRANSACT2_FINDFIRST 0x01
1064 #define TRANSACT2_FINDNEXT 0x02
1065 #define TRANSACT2_QFSINFO 0x03
1066 #define TRANSACT2_SETFSINFO 0x04
1067 #define TRANSACT2_QPATHINFO 0x05
1068 #define TRANSACT2_SETPATHINFO 0x06
1069 #define TRANSACT2_QFILEINFO 0x07
1070 #define TRANSACT2_SETFILEINFO 0x08
1071 #define TRANSACT2_FSCTL 0x09
1072 #define TRANSACT2_IOCTL 0x0A
1073 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
1074 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
1075 #define TRANSACT2_MKDIR 0x0D
1076 #define TRANSACT2_SESSION_SETUP 0x0E
1077 #define TRANSACT2_GET_DFS_REFERRAL 0x10
1078 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
1080 /* These are the NT transact sub commands. */
1081 #define NT_TRANSACT_CREATE 1
1082 #define NT_TRANSACT_IOCTL 2
1083 #define NT_TRANSACT_SET_SECURITY_DESC 3
1084 #define NT_TRANSACT_NOTIFY_CHANGE 4
1085 #define NT_TRANSACT_RENAME 5
1086 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
1087 #define NT_TRANSACT_GET_USER_QUOTA 7
1088 #define NT_TRANSACT_SET_USER_QUOTA 8
1090 /* These are the NT transact_get_user_quota sub commands */
1091 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
1092 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
1093 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
1095 /* Relevant IOCTL codes */
1096 #define IOCTL_QUERY_JOB_INFO 0x530060
1098 /* these are the trans2 sub fields for primary requests */
1099 #define smb_tpscnt smb_vwv0
1100 #define smb_tdscnt smb_vwv1
1101 #define smb_mprcnt smb_vwv2
1102 #define smb_mdrcnt smb_vwv3
1103 #define smb_msrcnt smb_vwv4
1104 #define smb_flags smb_vwv5
1105 #define smb_timeout smb_vwv6
1106 #define smb_pscnt smb_vwv9
1107 #define smb_psoff smb_vwv10
1108 #define smb_dscnt smb_vwv11
1109 #define smb_dsoff smb_vwv12
1110 #define smb_suwcnt smb_vwv13
1111 #define smb_setup smb_vwv14
1112 #define smb_setup0 smb_setup
1113 #define smb_setup1 (smb_setup+2)
1114 #define smb_setup2 (smb_setup+4)
1116 /* these are for the secondary requests */
1117 #define smb_spscnt smb_vwv2
1118 #define smb_spsoff smb_vwv3
1119 #define smb_spsdisp smb_vwv4
1120 #define smb_sdscnt smb_vwv5
1121 #define smb_sdsoff smb_vwv6
1122 #define smb_sdsdisp smb_vwv7
1123 #define smb_sfid smb_vwv8
1125 /* and these for responses */
1126 #define smb_tprcnt smb_vwv0
1127 #define smb_tdrcnt smb_vwv1
1128 #define smb_prcnt smb_vwv3
1129 #define smb_proff smb_vwv4
1130 #define smb_prdisp smb_vwv5
1131 #define smb_drcnt smb_vwv6
1132 #define smb_droff smb_vwv7
1133 #define smb_drdisp smb_vwv8
1135 /* these are for the NT trans primary request. */
1136 #define smb_nt_MaxSetupCount smb_vwv0
1137 #define smb_nt_Flags (smb_vwv0 + 1)
1138 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
1139 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
1140 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
1141 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
1142 #define smb_nt_ParameterCount (smb_vwv0 + 19)
1143 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
1144 #define smb_nt_DataCount (smb_vwv0 + 27)
1145 #define smb_nt_DataOffset (smb_vwv0 + 31)
1146 #define smb_nt_SetupCount (smb_vwv0 + 35)
1147 #define smb_nt_Function (smb_vwv0 + 36)
1148 #define smb_nt_SetupStart (smb_vwv0 + 38)
1150 /* these are for the NT trans secondary request. */
1151 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1152 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1153 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1154 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1155 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1156 #define smb_nts_DataCount (smb_vwv0 + 23)
1157 #define smb_nts_DataOffset (smb_vwv0 + 27)
1158 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1160 /* these are for the NT trans reply. */
1161 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1162 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1163 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1164 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1165 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1166 #define smb_ntr_DataCount (smb_vwv0 + 23)
1167 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1168 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1170 /* these are for the NT create_and_X */
1171 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1172 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1173 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1174 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1175 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1176 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1177 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1178 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1179 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1180 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1181 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1183 /* this is used on a TConX. I'm not sure the name is very helpful though */
1184 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1185 #define SMB_SHARE_IN_DFS 0x0002
1187 /* Named pipe write mode flags. Used in writeX calls. */
1188 #define PIPE_RAW_MODE 0x4
1189 #define PIPE_START_MESSAGE 0x8
1191 /* File Specific access rights */
1192 #define FILE_READ_DATA 0x00000001
1193 #define FILE_WRITE_DATA 0x00000002
1194 #define FILE_APPEND_DATA 0x00000004
1195 #define FILE_READ_EA 0x00000008 /* File and directory */
1196 #define FILE_WRITE_EA 0x00000010 /* File and directory */
1197 #define FILE_EXECUTE 0x00000020
1198 #define FILE_DELETE_CHILD 0x00000040
1199 #define FILE_READ_ATTRIBUTES 0x00000080
1200 #define FILE_WRITE_ATTRIBUTES 0x00000100
1202 #define FILE_ALL_ACCESS 0x000001FF
1204 /* Directory specific access rights */
1205 #define FILE_LIST_DIRECTORY 0x00000001
1206 #define FILE_ADD_FILE 0x00000002
1207 #define FILE_ADD_SUBDIRECTORY 0x00000004
1208 #define FILE_TRAVERSE 0x00000020
1209 #define FILE_DELETE_CHILD 0x00000040
1211 /* the desired access to use when opening a pipe */
1212 #define DESIRED_ACCESS_PIPE 0x2019f
1214 /* Generic access masks & rights. */
1215 #define DELETE_ACCESS 0x00010000 /* (1L<<16) */
1216 #define READ_CONTROL_ACCESS 0x00020000 /* (1L<<17) */
1217 #define WRITE_DAC_ACCESS 0x00040000 /* (1L<<18) */
1218 #define WRITE_OWNER_ACCESS 0x00080000 /* (1L<<19) */
1219 #define SYNCHRONIZE_ACCESS 0x00100000 /* (1L<<20) */
1221 #define SYSTEM_SECURITY_ACCESS 0x01000000 /* (1L<<24) */
1222 #define MAXIMUM_ALLOWED_ACCESS 0x02000000 /* (1L<<25) */
1223 #define GENERIC_ALL_ACCESS 0x10000000 /* (1<<28) */
1224 #define GENERIC_EXECUTE_ACCESS 0x20000000 /* (1<<29) */
1225 #define GENERIC_WRITE_ACCESS 0x40000000 /* (1<<30) */
1226 #define GENERIC_READ_ACCESS ((unsigned)0x80000000) /* (((unsigned)1)<<31) */
1228 /* Mapping of generic access rights for files to specific rights. */
1230 /* This maps to 0x1F01FF */
1231 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1233 /* This maps to 0x120089 */
1234 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1235 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1237 /* This maps to 0x120116 */
1238 #define FILE_GENERIC_WRITE (STD_RIGHT_READ_CONTROL_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1239 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1241 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|FILE_READ_ATTRIBUTES|\
1242 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1244 /* Share specific rights. */
1245 #define SHARE_ALL_ACCESS FILE_GENERIC_ALL
1246 #define SHARE_READ_ONLY (FILE_GENERIC_READ|FILE_EXECUTE)
1248 /* Mapping of access rights to UNIX perms. */
1249 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1250 #define UNIX_ACCESS_R FILE_GENERIC_READ
1251 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1252 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1254 /* Mapping of access rights to UNIX perms. for a UNIX directory. */
1255 #define UNIX_DIRECTORY_ACCESS_RWX FILE_GENERIC_ALL
1256 #define UNIX_DIRECTORY_ACCESS_R FILE_GENERIC_READ
1257 #define UNIX_DIRECTORY_ACCESS_W (FILE_GENERIC_WRITE|FILE_DELETE_CHILD)
1258 #define UNIX_DIRECTORY_ACCESS_X FILE_GENERIC_EXECUTE
1262 * This is the old mapping we used to use. To get W2KSP2 profiles
1263 * working we need to map to the canonical file perms.
1265 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1266 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1267 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1268 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1269 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1270 FILE_APPEND_DATA|FILE_WRITE_DATA)
1271 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1272 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1275 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1278 #define REQUEST_OPLOCK 2
1279 #define REQUEST_BATCH_OPLOCK 4
1280 #define OPEN_DIRECTORY 8
1281 #define EXTENDED_RESPONSE_REQUIRED 0x10
1283 /* ShareAccess field. */
1284 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1285 #define FILE_SHARE_READ 1
1286 #define FILE_SHARE_WRITE 2
1287 #define FILE_SHARE_DELETE 4
1289 /* FileAttributesField */
1290 #define FILE_ATTRIBUTE_READONLY 0x001L
1291 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1292 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1293 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1294 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1295 #define FILE_ATTRIBUTE_NORMAL 0x080L
1296 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1297 #define FILE_ATTRIBUTE_SPARSE 0x200L
1298 #define FILE_ATTRIBUTE_REPARSE_POINT 0x400L
1299 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1300 #define FILE_ATTRIBUTE_OFFLINE 0x1000L
1301 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1302 #define FILE_ATTRIBUTE_ENCRYPTED 0x4000L
1303 #define SAMBA_ATTRIBUTES_MASK 0x7F
1305 /* Flags - combined with attributes. */
1306 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1307 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1308 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1309 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1310 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1311 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1312 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1314 /* CreateDisposition field. */
1315 #define FILE_SUPERSEDE 0 /* File exists overwrite/supersede. File not exist create. */
1316 #define FILE_OPEN 1 /* File exists open. File not exist fail. */
1317 #define FILE_CREATE 2 /* File exists fail. File not exist create. */
1318 #define FILE_OPEN_IF 3 /* File exists open. File not exist create. */
1319 #define FILE_OVERWRITE 4 /* File exists overwrite. File not exist fail. */
1320 #define FILE_OVERWRITE_IF 5 /* File exists overwrite. File not exist create. */
1322 /* CreateOptions field. */
1323 #define FILE_DIRECTORY_FILE 0x0001
1324 #define FILE_WRITE_THROUGH 0x0002
1325 #define FILE_SEQUENTIAL_ONLY 0x0004
1326 #define FILE_NON_DIRECTORY_FILE 0x0040
1327 #define FILE_NO_EA_KNOWLEDGE 0x0200
1328 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1329 #define FILE_RANDOM_ACCESS 0x0800
1330 #define FILE_DELETE_ON_CLOSE 0x1000
1331 #define FILE_OPEN_BY_FILE_ID 0x2000
1333 #define NTCREATEX_OPTIONS_MUST_IGNORE_MASK (0x008F0480)
1335 #define NTCREATEX_OPTIONS_INVALID_PARAM_MASK (0xFF100030)
1338 * Private create options used by the ntcreatex processing code. From Samba4.
1339 * We reuse some ignored flags for private use.
1341 #define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x00010000
1342 #define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x00020000
1344 /* Private options for streams support */
1345 #define NTCREATEX_OPTIONS_PRIVATE_STREAM_DELETE 0x00040000
1347 /* Responses when opening a file. */
1348 #define FILE_WAS_SUPERSEDED 0
1349 #define FILE_WAS_OPENED 1
1350 #define FILE_WAS_CREATED 2
1351 #define FILE_WAS_OVERWRITTEN 3
1353 /* File type flags */
1354 #define FILE_TYPE_DISK 0
1355 #define FILE_TYPE_BYTE_MODE_PIPE 1
1356 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1357 #define FILE_TYPE_PRINTER 3
1358 #define FILE_TYPE_COMM_DEVICE 4
1359 #define FILE_TYPE_UNKNOWN 0xFFFF
1361 /* Flag for NT transact rename call. */
1362 #define RENAME_REPLACE_IF_EXISTS 1
1364 /* flags for SMBntrename call (from Samba4) */
1365 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1366 #define RENAME_FLAG_HARD_LINK 0x103
1367 #define RENAME_FLAG_RENAME 0x104
1368 #define RENAME_FLAG_COPY 0x105
1370 /* Filesystem Attributes. */
1371 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1372 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1373 #define FILE_UNICODE_ON_DISK 0x00000004
1374 /* According to cifs9f, this is 4, not 8 */
1375 /* Acconding to testing, this actually sets the security attribute! */
1376 #define FILE_PERSISTENT_ACLS 0x00000008
1377 #define FILE_FILE_COMPRESSION 0x00000010
1378 #define FILE_VOLUME_QUOTAS 0x00000020
1379 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1380 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1381 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1382 #define FS_LFN_APIS 0x00004000
1383 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1384 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1385 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1386 #define FILE_NAMED_STREAMS 0x00040000
1387 #define FILE_READ_ONLY_VOLUME 0x00080000
1389 /* ChangeNotify flags. */
1390 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x001
1391 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1392 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1393 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1394 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1395 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1396 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1397 #define FILE_NOTIFY_CHANGE_EA 0x080
1398 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1399 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
1400 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
1401 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
1402 #define FILE_NOTIFY_CHANGE_FILE_CONTENT \
1403 (FILE_NOTIFY_CHANGE_FILE_NAME | FILE_NOTIFY_CHANGE_DIR_NAME \
1404 | FILE_NOTIFY_CHANGE_ATTRIBUTES | FILE_NOTIFY_CHANGE_SIZE \
1405 | FILE_NOTIFY_CHANGE_CREATION | FILE_NOTIFY_CHANGE_EA \
1406 | FILE_NOTIFY_CHANGE_SECURITY)
1408 #define FILE_NOTIFY_CHANGE_NAME \
1409 (FILE_NOTIFY_CHANGE_FILE_NAME|FILE_NOTIFY_CHANGE_DIR_NAME)
1411 /* change notify action results */
1412 #define NOTIFY_ACTION_ADDED 1
1413 #define NOTIFY_ACTION_REMOVED 2
1414 #define NOTIFY_ACTION_MODIFIED 3
1415 #define NOTIFY_ACTION_OLD_NAME 4
1416 #define NOTIFY_ACTION_NEW_NAME 5
1417 #define NOTIFY_ACTION_ADDED_STREAM 6
1418 #define NOTIFY_ACTION_REMOVED_STREAM 7
1419 #define NOTIFY_ACTION_MODIFIED_STREAM 8
1422 /* where to find the base of the SMB packet proper */
1423 #define smb_base(buf) (((char *)(buf))+4)
1425 /* we don't allow server strings to be longer than 48 characters as
1426 otherwise NT will not honour the announce packets */
1427 #define MAX_SERVER_STRING_LENGTH 48
1430 #define SMB_SUCCESS 0 /* The request was successful. */
1433 void dfs_unlogin(void);
1434 extern int dcelogin_atmost_once
;
1438 char *strdup(char *s
);
1442 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1449 /* This was set by JHT in liaison with Jeremy Allison early 1997
1451 * Version 4.0 - never made public
1452 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1453 * - Reappeared in 1.9.16p11 with fixed smbd services
1454 * Version 4.20 - To indicate that nmbd and browsing now works better
1455 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1457 * Note: In the presence of NT4.X do not set above 4.9
1458 * Setting this above 4.9 can have undesired side-effects.
1459 * This may change again in Samba-3.0 after further testing. JHT
1462 #define DEFAULT_MAJOR_VERSION 0x04
1463 #define DEFAULT_MINOR_VERSION 0x09
1465 /* Browser Election Values */
1466 #define BROWSER_ELECTION_VERSION 0x010f
1467 #define BROWSER_CONSTANT 0xaa55
1469 /* Sercurity mode bits. */
1470 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1471 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1472 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1473 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1475 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1477 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1478 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1479 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1480 #define FLAGS2_UNKNOWN_BIT4 0x0010
1481 #define FLAGS2_IS_LONG_NAME 0x0040
1482 #define FLAGS2_EXTENDED_SECURITY 0x0800
1483 #define FLAGS2_DFS_PATHNAMES 0x1000
1484 #define FLAGS2_READ_PERMIT_EXECUTE 0x2000
1485 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1486 #define FLAGS2_UNICODE_STRINGS 0x8000
1488 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1490 /* TCONX Flag (smb_vwv2). */
1491 #define TCONX_FLAG_EXTENDED_RESPONSE 0x8
1493 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1495 #define CAP_RAW_MODE 0x0001
1496 #define CAP_MPX_MODE 0x0002
1497 #define CAP_UNICODE 0x0004
1498 #define CAP_LARGE_FILES 0x0008
1499 #define CAP_NT_SMBS 0x0010
1500 #define CAP_RPC_REMOTE_APIS 0x0020
1501 #define CAP_STATUS32 0x0040
1502 #define CAP_LEVEL_II_OPLOCKS 0x0080
1503 #define CAP_LOCK_AND_READ 0x0100
1504 #define CAP_NT_FIND 0x0200
1505 #define CAP_DFS 0x1000
1506 #define CAP_W2K_SMBS 0x2000
1507 #define CAP_LARGE_READX 0x4000
1508 #define CAP_LARGE_WRITEX 0x8000
1509 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1510 #define CAP_EXTENDED_SECURITY 0x80000000
1512 /* protocol types. It assumes that higher protocols include lower protocols
1514 enum protocol_types
{
1524 /* security levels */
1525 enum security_types
{SEC_SHARE
,SEC_USER
,SEC_SERVER
,SEC_DOMAIN
,SEC_ADS
};
1535 /* printing types */
1536 enum printing_types
{PRINT_BSD
,PRINT_SYSV
,PRINT_AIX
,PRINT_HPUX
,
1537 PRINT_QNX
,PRINT_PLP
,PRINT_LPRNG
,PRINT_SOFTQ
,
1538 PRINT_CUPS
,PRINT_LPRNT
,PRINT_LPROS2
,PRINT_IPRINT
1539 #if defined(DEVELOPER) || defined(ENABLE_BUILD_FARM_HACKS)
1540 ,PRINT_TEST
,PRINT_VLP
1541 #endif /* DEVELOPER */
1544 /* LDAP schema types */
1545 enum schema_types
{SCHEMA_COMPAT
, SCHEMA_AD
, SCHEMA_SAMBA
};
1547 /* LDAP SSL options */
1548 enum ldap_ssl_types
{LDAP_SSL_OFF
, LDAP_SSL_START_TLS
};
1550 /* LDAP PASSWD SYNC methods */
1551 enum ldap_passwd_sync_types
{LDAP_PASSWD_SYNC_ON
, LDAP_PASSWD_SYNC_OFF
, LDAP_PASSWD_SYNC_ONLY
};
1553 /* Remote architectures we know about. */
1554 enum remote_arch_types
{RA_UNKNOWN
, RA_WFWG
, RA_OS2
, RA_WIN95
, RA_WINNT
,
1555 RA_WIN2K
, RA_WINXP
, RA_WIN2K3
, RA_VISTA
,
1556 RA_SAMBA
, RA_CIFSFS
, RA_WINXP64
};
1559 enum case_handling
{CASE_LOWER
,CASE_UPPER
};
1561 /* ACL compatibility */
1562 enum acl_compatibility
{ACL_COMPAT_AUTO
, ACL_COMPAT_WINNT
, ACL_COMPAT_WIN2K
};
1564 * Global value meaing that the smb_uid field should be
1565 * ingored (in share level security and protocol level == CORE)
1568 #define UID_FIELD_INVALID 0
1569 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1572 * Size of buffer to use when moving files across filesystems.
1574 #define COPYBUF_SIZE (8*1024)
1577 * Map the Core and Extended Oplock requesst bits down
1578 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1584 #define CORE_OPLOCK_REQUEST(inbuf) \
1585 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1588 * Extended protocol.
1590 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1593 #define LOCKING_ANDX_SHARED_LOCK 0x1
1594 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1595 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1596 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1597 #define LOCKING_ANDX_LARGE_FILES 0x10
1600 * Bits we test with.
1601 * Note these must fit into 16-bits.
1604 #define NO_OPLOCK 0x0
1605 #define EXCLUSIVE_OPLOCK 0x1
1606 #define BATCH_OPLOCK 0x2
1607 #define LEVEL_II_OPLOCK 0x4
1609 /* The following are Samba-private. */
1610 #define INTERNAL_OPEN_ONLY 0x8
1611 #define FAKE_LEVEL_II_OPLOCK 0x10 /* Client requested no_oplock, but we have to
1612 * inform potential level2 holders on
1614 #define DEFERRED_OPEN_ENTRY 0x20
1615 #define UNUSED_SHARE_MODE_ENTRY 0x40
1616 #define FORCE_OPLOCK_BREAK_TO_NONE 0x80
1618 /* None of the following should ever appear in fsp->oplock_request. */
1619 #define SAMBA_PRIVATE_OPLOCK_MASK (INTERNAL_OPEN_ONLY|DEFERRED_OPEN_ENTRY|UNUSED_SHARE_MODE_ENTRY|FORCE_OPLOCK_BREAK_TO_NONE)
1621 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)EXCLUSIVE_OPLOCK|(unsigned int)BATCH_OPLOCK))
1622 #define BATCH_OPLOCK_TYPE(lck) ((lck) & (unsigned int)BATCH_OPLOCK)
1623 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)LEVEL_II_OPLOCK|(unsigned int)FAKE_LEVEL_II_OPLOCK))
1625 /* kernel_oplock_message definition.
1627 struct kernel_oplock_message {
1631 unsigned long file_id;
1635 0 uint64_t dev 8 bytes
1636 8 uint64_t inode 8 bytes
1637 16 uint64_t extid 8 bytes
1638 24 unsigned long file_id 4 bytes
1642 #define MSG_SMB_KERNEL_BREAK_SIZE 28
1644 /* file_renamed_message definition.
1646 struct file_renamed_message {
1649 char names[1]; A variable area containing sharepath and filename.
1653 0 uint64_t dev 8 bytes
1654 8 uint64_t inode 8 bytes
1655 16 unit64_t extid 8 bytes
1656 24 char [] name zero terminated namelen bytes
1657 minimum length == 24.
1661 #define MSG_FILE_RENAMED_MIN_SIZE 24
1664 * On the wire return values for oplock types.
1667 #define CORE_OPLOCK_GRANTED (1<<5)
1668 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1670 #define NO_OPLOCK_RETURN 0
1671 #define EXCLUSIVE_OPLOCK_RETURN 1
1672 #define BATCH_OPLOCK_RETURN 2
1673 #define LEVEL_II_OPLOCK_RETURN 3
1676 #define OPLOCKLEVEL_NONE 0
1677 #define OPLOCKLEVEL_II 1
1680 * Capabilities abstracted for different systems.
1683 enum smbd_capability
{
1684 KERNEL_OPLOCK_CAPABILITY
,
1685 DMAPI_ACCESS_CAPABILITY
,
1690 * Kernel oplocks capability flags.
1693 /* Level 2 oplocks are supported natively by kernel oplocks. */
1694 #define KOPLOCKS_LEVEL2_SUPPORTED 0x1
1696 /* The kernel notifies deferred openers when they can retry the open. */
1697 #define KOPLOCKS_DEFERRED_OPEN_NOTIFICATION 0x2
1699 /* The kernel notifies smbds when an oplock break times out. */
1700 #define KOPLOCKS_TIMEOUT_NOTIFICATION 0x4
1702 /* The kernel notifies smbds when an oplock is broken. */
1703 #define KOPLOCKS_OPLOCK_BROKEN_NOTIFICATION 0x8
1705 struct kernel_oplocks_ops
;
1706 struct kernel_oplocks
{
1707 const struct kernel_oplocks_ops
*ops
;
1712 enum level2_contention_type
{
1713 LEVEL2_CONTEND_ALLOC_SHRINK
,
1714 LEVEL2_CONTEND_ALLOC_GROW
,
1715 LEVEL2_CONTEND_SET_FILE_LEN
,
1716 LEVEL2_CONTEND_FILL_SPARSE
,
1717 LEVEL2_CONTEND_WRITE
,
1718 LEVEL2_CONTEND_WINDOWS_BRL
,
1719 LEVEL2_CONTEND_POSIX_BRL
1722 /* if a kernel does support oplocks then a structure of the following
1723 typee is used to describe how to interact with the kernel */
1724 struct kernel_oplocks_ops
{
1725 bool (*set_oplock
)(struct kernel_oplocks
*ctx
,
1726 files_struct
*fsp
, int oplock_type
);
1727 void (*release_oplock
)(struct kernel_oplocks
*ctx
,
1728 files_struct
*fsp
, int oplock_type
);
1729 void (*contend_level2_oplocks_begin
)(files_struct
*fsp
,
1730 enum level2_contention_type type
);
1731 void (*contend_level2_oplocks_end
)(files_struct
*fsp
,
1732 enum level2_contention_type type
);
1735 #include "smb_macros.h"
1737 #define MAX_NETBIOSNAME_LEN 16
1738 /* DOS character, NetBIOS namestring. Type used on the wire. */
1739 typedef char nstring
[MAX_NETBIOSNAME_LEN
];
1740 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1741 typedef char unstring
[MAX_NETBIOSNAME_LEN
*4];
1743 /* A netbios name structure. */
1747 unsigned int name_type
;
1750 /* A netbios node status array element. */
1751 typedef struct node_status_
{
1754 unsigned char flags
;
1755 } NODE_STATUS_STRUCT
;
1757 /* The extra info from a NetBIOS node status query */
1758 struct node_status_extra
{
1759 unsigned char mac_addr
[6];
1760 /* There really is more here ... */
1763 typedef struct user_struct
{
1764 struct user_struct
*next
, *prev
;
1765 uint16 vuid
; /* Tag for this entry. */
1767 char *session_keystr
; /* used by utmp and pam session code.
1771 struct auth_serversupplied_info
*server_info
;
1773 struct auth_ntlmssp_state
*auth_ntlmssp_state
;
1776 struct unix_error_map
{
1784 * Size of new password account encoding string. This is enough space to
1785 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1786 * Do not change unless you are adding new ACB bits!
1789 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1792 Do you want session setups at user level security with a invalid
1793 password to be rejected or allowed in as guest? WinNT rejects them
1794 but it can be a pain as it means "net view" needs to use a password
1796 You have 3 choices in the setting of map_to_guest:
1798 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1799 are rejected. This is the default.
1801 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1802 are rejected, unless the username does not exist, in which case it
1803 is treated as a guest login
1805 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1806 are treated as a guest login
1808 Note that map_to_guest only has an effect in user or server
1812 #define NEVER_MAP_TO_GUEST 0
1813 #define MAP_TO_GUEST_ON_BAD_USER 1
1814 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1815 #define MAP_TO_GUEST_ON_BAD_UID 3
1817 #define SAFE_NETBIOS_CHARS ". -_"
1819 /* The maximum length of a trust account password.
1820 Used when we randomly create it, 15 char passwords
1821 exceed NT4's max password length */
1823 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1825 #include "popt_common.h"
1829 #define LDAP_PORT 389
1831 #define LDAP_GC_PORT 3268
1833 /* used by the IP comparison function */
1835 struct sockaddr_storage ss
;
1839 /* Special name type used to cause a _kerberos DNS lookup. */
1840 #define KDC_NAME_TYPE 0xDCDC
1849 struct ea_list
*next
, *prev
;
1850 struct ea_struct ea
;
1853 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1854 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"
1855 /* EA to use for DOS attributes */
1856 #define SAMBA_XATTR_DOS_ATTRIB "user.DOSATTRIB"
1857 /* Prefix for DosStreams in the vfs_streams_xattr module */
1858 #define SAMBA_XATTR_DOSSTREAM_PREFIX "user.DosStream."
1860 #define UUID_SIZE 16
1862 #define UUID_FLAT_SIZE 16
1863 typedef struct uuid_flat
{
1864 uint8 info
[UUID_FLAT_SIZE
];
1867 /* map readonly options */
1868 enum mapreadonly_options
{MAP_READONLY_NO
, MAP_READONLY_YES
, MAP_READONLY_PERMISSIONS
};
1870 /* usershare error codes. */
1871 enum usershare_err
{
1873 USERSHARE_MALFORMED_FILE
,
1874 USERSHARE_BAD_VERSION
,
1875 USERSHARE_MALFORMED_PATH
,
1876 USERSHARE_MALFORMED_COMMENT_DEF
,
1877 USERSHARE_MALFORMED_ACL_DEF
,
1879 USERSHARE_PATH_NOT_ABSOLUTE
,
1880 USERSHARE_PATH_IS_DENIED
,
1881 USERSHARE_PATH_NOT_ALLOWED
,
1882 USERSHARE_PATH_NOT_DIRECTORY
,
1886 /* Different reasons for closing a file. */
1887 enum file_close_type
{NORMAL_CLOSE
=0,SHUTDOWN_CLOSE
,ERROR_CLOSE
};
1889 /* Used in SMB_FS_OBJECTID_INFORMATION requests. Must be exactly 48 bytes. */
1890 #define SAMBA_EXTENDED_INFO_MAGIC 0x536d4261 /* "SmBa" */
1891 #define SAMBA_EXTENDED_INFO_VERSION_STRING_LENGTH 28
1892 struct smb_extended_info
{
1893 uint32 samba_magic
; /* Always SAMBA_EXTRA_INFO_MAGIC */
1894 uint32 samba_version
; /* Major/Minor/Release/Revision */
1895 uint32 samba_subversion
; /* Prerelease/RC/Vendor patch */
1896 NTTIME samba_gitcommitdate
;
1897 char samba_version_string
[SAMBA_EXTENDED_INFO_VERSION_STRING_LENGTH
];
1901 struct smb_file_time
{
1902 struct timespec mtime
;
1903 struct timespec atime
;
1904 struct timespec create_time
;
1908 * unix_convert_flags
1910 #define UCF_SAVE_LCOMP 0x00000001
1911 #define UCF_ALLOW_WCARD_LCOMP 0x00000002
1916 struct smb_filename
{
1919 char *original_lcomp
;
1923 /* struct for maintaining the child processes that get spawned from smbd */
1925 struct child_pid
*prev
, *next
;