release/src/Makefile

   1 #
   2 # Toplevel Makefile for the BCM947xx Linux Router release
   3 #
   4 # Copyright 2005, Broadcom Corporation
   5 # All Rights Reserved.
   6 #
   7 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11 #
  12 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  13 #
  14
  15 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16
  17 # To rebuild everything and all configurations:
  18 #  make distclean
  19 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m n o
  20 # The 1st "whatever" would be the build number, the sub-whatever would
  21 #       be the update to the version.
  22 #
  23 # Example:
  24 # make V1=8516 V2="-jffs.1" a b c d m s n o
  25
  26 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  27
  28
  29 export ac_cv_func_malloc_0_nonnull=yes
  30 export SRCBASE := $(shell pwd)
  31 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  32 PATH := $(RELEASEDIR)/tools:$(PATH)
  33 export TPROFILE := N
  34
  35 include ./target.mak
  36
  37 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  38 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  39 V1 ?= "--def"
  40 VPN ?= "VPN"
  41 ifeq ($(CONFIG_LINUX26),y)
  42 ND = "K26"
  43 else
  44 ND = "ND"
  45 endif
  46
  47 PPTPD ?= "n"
  48
  49 ifeq ($(NVRAM_SIZE),)
  50 NVRAM_SIZE = 0
  51 endif
  52
  53 -include tomato_profile.mak
  54
  55 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  56 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  57 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  58 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  59 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  60 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  61 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  62
  63 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  64 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  65 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  66 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  67
  68 ifeq ($(CONFIG_LINUX26),y)
  69 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  70 KERN_SIZE_OPT ?= n
  71 else
  72 mips_rev =
  73 KERN_SIZE_OPT ?= y
  74 endif
  75
  76 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  77
  78 tomato_ver:
  79         @echo ""
  80         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  81
  82 ifeq ($(TOMATO_BUILD),)
  83
  84 all:
  85         $(MAKE) a
  86
  87 else
  88
  89 all: tomato_ver
  90         @echo ""
  91         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
  92
  93         @echo ""
  94         @echo ""
  95
  96         @-mkdir image
  97         @$(MAKE) -C router all
  98         @$(MAKE) -C router install
  99         @$(MAKE) -C btools
 100
 101         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 102         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 103 ifeq ($(LINKSYS_E),1)
 104         @rm -f image/tomato-E??00$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 105 endif
 106 ifeq ($(BELKIN),y)
 107 ifneq ($(NVRAM_SIZE),60)
 108         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 109         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 110 endif
 111 endif
 112         @echo "" >>fpkg.log
 113         @echo "***********************" `date` "************************" >>fpkg.log
 114         @cat router/shared/tomato_version >>fpkg.log
 115         @echo "" >>fpkg.log
 116         @cat router/target.info >>fpkg.log
 117 ifeq ($(wildcard include/bcm20xx.h),)
 118         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 119                 -t image/tomato.trx \
 120                 -l W54G,image/WRT54G_WRT54GL.bin \
 121                 -l W54S,image/WRT54GS.bin \
 122                 -l W54s,image/WRT54GSv4.bin \
 123                 -l W54U,image/WRTSL54GS.bin \
 124                 -m 0x10577050,image/WR850G.bin \
 125                 | tee -a fpkg.log
 126 else
 127 ifeq ($(LINKSYS_E),1)
 128         # Linksys E-series build plus generic TRX image
 129         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 130                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 131                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 132                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 133                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 134                 | tee -a fpkg.log
 135 else
 136 ifeq ($(BELKIN),y)
 137 ifneq ($(NVRAM_SIZE),60)
 138         # Create Belkin images
 139         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 140                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 141                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 142                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 143                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 144                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 145                 | tee -a fpkg.log
 146 endif
 147 else
 148         # Create generic TRX image
 149         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 150                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 151                 | tee -a fpkg.log
 152 endif
 153 endif
 154 endif
 155
 156         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 157         @echo ""
 158         @echo "-----------------"
 159         @echo `cat router/shared/tomato_version` " ready"
 160         @echo "-----------------"
 161 ifneq ($(NOVERSION),1)
 162         @cp router/shared/tomato_version router/shared/tomato_version_last
 163         @btools/uversion.pl --bump
 164 endif
 165 endif
 166
 167
 168
 169 clean:
 170         @touch router/.config
 171         @rm -f router/config_[a-z]
 172         @rm -f router/busybox/config_[a-z]
 173         @$(MAKE) -C router $@
 174         @-rmdir router/mipsel-uclibc
 175
 176 cleanimage:
 177         @rm -f fpkg.log
 178         @rm -fr image/*
 179         @rm -f router/.config
 180         @touch router/.config
 181         @-mkdir image
 182
 183 cleantools:
 184         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 185         @$(MAKE) -C btools clean
 186
 187 cleankernel:
 188         @cd $(LINUXDIR) && \
 189         mv .config save-config && \
 190         $(MAKE) distclean || true; \
 191         cp -p save-config .config || true
 192
 193 kernel:
 194         @$(MAKE) -C router kernel
 195         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 196
 197 distclean: clean cleanimage cleankernel cleantools
 198 ifneq ($(INSIDE_MAK),1)
 199         @$(MAKE) -C router $@ INSIDE_MAK=1
 200 endif
 201         mv router/busybox/.config busybox-saved-config || true
 202         @$(MAKE) -C router/busybox distclean
 203         @rm -f router/busybox/config_current
 204         @cp -p busybox-saved-config router/busybox/.config || true
 205         @cp -p router/busybox/.config  router/busybox/config_current || true
 206         @rm -f router/config_current
 207         @rm -f router/.config.cmd router/.config.old router/.config
 208         @rm -f router/libfoo_xref.txt
 209         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 210         @touch tomato_profile.mak
 211         @touch router/shared/tomato_profile.h
 212
 213
 214 prepk:
 215         @cd $(LINUXDIR) ; \
 216                 rm -f config_current ; \
 217                 ln -s config_base config_current ; \
 218                 cp -f config_current .config
 219         $(MAKE) -C $(LINUXDIR) oldconfig
 220 ifneq ($(CONFIG_LINUX26),y)
 221         $(MAKE) -C $(LINUXDIR) dep
 222 endif
 223
 224 what:
 225         @echo ""
 226         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 227         @echo ""
 228
 229
 230 # The methodology for making the different builds is to
 231 # copy the "base" config file to the "target" config file in
 232 # the appropriate directory, and then edit it by removing and
 233 # inserting the desired configuration lines.
 234 # You can't just delete the "whatever=y" line, you must have
 235 # a "...is not set" line, or the make oldconfig will stop and ask
 236 # what to do.
 237
 238 # Options for "make bin" :
 239 # BUILD_DESC (Std|Lite|Ext|...)
 240 # MIPS32 (r2|r1)
 241 # KERN_SIZE_OPT
 242 # USB ("USB"|"")
 243 # JFFSv1 | NO_JFFS
 244 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 245 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM, NOCAT, CTF, NGINX NANO
 246 # NFS BTCLIENT BTGUI TR_EXTRAS SNMP SDHC HFS UPS DNSCRYPT PPTPD TOR IPSEC RAID
 247
 248 define RouterOptions
 249         @( \
 250         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 251                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 252                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 253         fi; \
 254         sed -i "/TCONFIG_EMF/d" $(1); \
 255         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 256                 if [ "$(SLIM)" = "y" ]; then \
 257                         echo "# TCONFIG_EMF is not set" >>$(1); \
 258                 else \
 259                         echo "TCONFIG_EMF=y" >>$(1); \
 260                 fi; \
 261         else \
 262                 echo "# TCONFIG_EMF is not set" >>$(1); \
 263         fi; \
 264         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 265         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 266                 if [ "$(JFFSv1)" = "y" ]; then \
 267                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 268                 else \
 269                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 270                 fi; \
 271         else \
 272                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 273         fi; \
 274         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(IPSEC)" = "y" ]; then \
 275                 echo "TCONFIG_IPSEC=y" >>$(1); \
 276         else \
 277                 echo "# TCONFIG_IPSEC is not set" >>$(1); \
 278         fi; \
 279         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(RAID)" = "y" ]; then \
 280                 echo "TCONFIG_RAID=y" >>$(1); \
 281         else \
 282                 echo "# TCONFIG_RAID is not set" >>$(1); \
 283         fi; \
 284         if [ "$(MIPS32)" = "r2" ]; then \
 285                 echo "TCONFIG_MIPSR2=y" >>$(1); \
 286         else \
 287                 echo "# TCONFIG_MIPSR2 is not set" >>$(1); \
 288         fi; \
 289         if [ "$(USB)" = "USB" ]; then \
 290                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 291                 echo "TCONFIG_USB=y" >>$(1); \
 292                 if [ "$(USBEXTRAS)" = "y" ]; then \
 293                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 294                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 295                 fi; \
 296                 if [ "$(NTFS)" = "y" ]; then \
 297                         sed -i "/TCONFIG_NTFS/d" $(1); \
 298                         echo "TCONFIG_NTFS=y" >>$(1); \
 299                 fi; \
 300                 if [ "$(MEDIASRV)" = "y" ]; then \
 301                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 302                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 303                 fi; \
 304         else \
 305                 sed -i "/TCONFIG_USB=y/d" $(1); \
 306                 echo "# TCONFIG_USB is not set" >>$(1); \
 307         fi; \
 308         if [ "$(NO_SAMBA)" = "y" ]; then \
 309                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 310                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 311         fi; \
 312         if [ "$(NO_ZEBRA)" = "y" ]; then \
 313                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 314                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 315         fi; \
 316         if [ "$(NO_JFFS)" = "y" ]; then \
 317                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 318                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 319                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 320                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 321         fi; \
 322         if [ "$(NO_CIFS)" = "y" ]; then \
 323                 sed -i "/TCONFIG_CIFS/d" $(1); \
 324                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 325         fi; \
 326         if [ "$(NO_SSH)" = "y" ]; then \
 327                 sed -i "/TCONFIG_SSH/d" $(1); \
 328                 echo "# TCONFIG_SSH is not set" >>$(1); \
 329         fi; \
 330         if [ "$(NO_HTTPS)" = "y" ]; then \
 331                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 332                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 333         fi; \
 334         if [ "$(NO_XXTP)" = "y" ]; then \
 335                 sed -i "/TCONFIG_L2TP/d" $(1); \
 336                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 337                 sed -i "/TCONFIG_PPTP/d" $(1); \
 338                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 339         fi; \
 340         if [ "$(NO_LIBOPT)" = "y" ]; then \
 341                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 342                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 343         fi; \
 344         if [ "$(EBTABLES)" = "y" ]; then \
 345                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 346                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 347         fi; \
 348         if [ "$(IPV6SUPP)" = "y" ]; then \
 349                 sed -i "/TCONFIG_IPV6/d" $(1); \
 350                 echo "TCONFIG_IPV6=y" >>$(1); \
 351         fi; \
 352         if [ "$(NOCAT)" = "y" ]; then \
 353                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 354                 echo "TCONFIG_NOCAT=y" >>$(1); \
 355         fi; \
 356         if [ "$(NGINX)" = "y" ]; then \
 357                 sed -i "/TCONFIG_NGINX/d" $(1); \
 358                 echo "TCONFIG_NGINX=y" >>$(1); \
 359         fi; \
 360         sed -i "/TCONFIG_MULTIWAN/d" $(1); \
 361         if [ "$(NVRAM_SIZE)" = "60" ] || [ "$(NVRAM_SIZE)" = "64" ] || [ "$(NVRAM_64K)" = "y" ]; then \
 362                 echo "TCONFIG_MULTIWAN=y" >>$(1); \
 363         else \
 364                 echo "# TCONFIG_MULTIWAN is not set" >>$(1); \
 365         fi; \
 366         if [ "$(OPENVPN)" = "y" ]; then \
 367                 sed -i "/TCONFIG_LZO/d" $(1); \
 368                 echo "TCONFIG_LZO=y" >>$(1); \
 369                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 370                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 371                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 372                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 373                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 374                 fi; \
 375         fi; \
 376         if [ "$(PPTPD)" = "y" ]; then \
 377                 sed -i "/TCONFIG_PPTPD/d" $(1); \
 378                 echo "TCONFIG_PPTPD=y" >>$(1); \
 379         fi; \
 380         if [ "$(BTCLIENT)" = "y" ]; then \
 381                 sed -i "/TCONFIG_BT/d" $(1); \
 382                 echo "TCONFIG_BT=y" >>$(1); \
 383                 sed -i "/TCONFIG_BBT/d" $(1); \
 384                 echo "TCONFIG_BBT=y" >>$(1); \
 385         fi; \
 386         if [ "$(BTGUI)" = "y" ]; then \
 387                 sed -i "/TCONFIG_BT/d" $(1); \
 388                 echo "TCONFIG_BT=y" >>$(1); \
 389         fi; \
 390         if [ "$(TR_EXTRAS)" = "y" ]; then \
 391                 sed -i "/TCONFIG_TR_EXTRAS/d" $(1); \
 392                 echo "TCONFIG_TR_EXTRAS=y" >>$(1); \
 393         fi; \
 394         if [ "$(NFS)" = "y" ]; then \
 395                 sed -i "/TCONFIG_NFS/d" $(1); \
 396                 echo "TCONFIG_NFS=y" >>$(1); \
 397         fi; \
 398         if [ "$(SNMP)" = "y" ]; then \
 399                 sed -i "/TCONFIG_SNMP/d" $(1); \
 400                 echo "TCONFIG_SNMP=y" >>$(1); \
 401         fi; \
 402         if [ "$(SDHC)" = "y" ]; then \
 403                 sed -i "/TCONFIG_SDHC/d" $(1); \
 404                 echo "TCONFIG_SDHC=y" >>$(1); \
 405         fi; \
 406         if [ "$(DNSSEC)" = "y" ]; then \
 407                 sed -i "/TCONFIG_DNSSEC/d" $(1); \
 408                 echo "TCONFIG_DNSSEC=y" >>$(1); \
 409         fi; \
 410         if [ "$(HFS)" = "y" ]; then \
 411                 sed -i "/TCONFIG_HFS/d" $(1); \
 412                 echo "TCONFIG_HFS=y" >>$(1); \
 413         fi; \
 414         if [ "$(UPS)" = "y" ]; then \
 415                 sed -i "/TCONFIG_UPS/d" $(1); \
 416                 echo "TCONFIG_UPS=y" >>$(1); \
 417         fi; \
 418         if [ "$(NANO)" = "y" ]; then \
 419                 sed -i "/TCONFIG_NANO/d" $(1); \
 420                 echo "TCONFIG_NANO=y" >>$(1); \
 421         fi; \
 422         if [ "$(DNSCRYPT)" = "y" ]; then \
 423                 sed -i "/TCONFIG_DNSCRYPT/d" $(1); \
 424                 echo "TCONFIG_DNSCRYPT=y" >>$(1); \
 425         fi; \
 426         if [ "$(TOR)" = "y" ]; then \
 427                 sed -i "/TCONFIG_TOR/d" $(1); \
 428                 echo "TCONFIG_TOR=y" >>$(1); \
 429         fi; \
 430         if [ "$(BUILD_DESC)" = "AIO" ]; then \
 431                 sed -i "/TCONFIG_AIO/d" $(1); \
 432                 echo "TCONFIG_AIO=y" >>$(1); \
 433         fi; \
 434         if [ "$(CTF)" = "y" ]; then \
 435                 sed -i "/TCONFIG_CTF/d" $(1); \
 436                 echo "TCONFIG_CTF=y" >>$(1); \
 437         fi; \
 438         if [ "$(TINC)" = "y" ]; then \
 439                 sed -i "/TCONFIG_TINC/d" $(1); \
 440                 echo "TCONFIG_TINC=y" >>$(1); \
 441         fi; \
 442         )
 443 endef
 444
 445 define BusyboxOptions
 446         @( \
 447         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 448                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 449                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 450                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 451                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 452                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 453                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 454                 sed -i "/CONFIG_MKNOD/d" $(1); \
 455                 echo "CONFIG_MKNOD=y" >>$(1); \
 456                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 457                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 458         else \
 459                 sed -i "/CONFIG_UDHCPC=y/d" $(1); \
 460                 sed -i "/CONFIG_UDHCPC_OLD/d" $(1); \
 461                 echo "CONFIG_UDHCPC_OLD=y" >>$(1); \
 462                 echo "# CONFIG_UDHCPC is not set" >>$(1); \
 463         fi; \
 464         if [ "$(NO_CIFS)" = "y" ]; then \
 465                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 466                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 467         fi; \
 468         if [ "$(BBEXTRAS)" = "y" ]; then \
 469                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 470                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 471                 sed -i "/CONFIG_WHOIS/d" $(1); \
 472                 echo "CONFIG_WHOIS=y" >>$(1); \
 473                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 474                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 475                 sed -i "/CONFIG_CLEAR/d" $(1); \
 476                 echo "CONFIG_CLEAR=y" >>$(1); \
 477                 sed -i "/CONFIG_NICE/d" $(1); \
 478                 echo "CONFIG_NICE=y" >>$(1); \
 479                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 480                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 481                 sed -i "/CONFIG_SEQ/d" $(1); \
 482                 echo "CONFIG_SEQ=y" >>$(1); \
 483                 sed -i "/CONFIG_STTY/d" $(1); \
 484                 echo "CONFIG_STTY=y" >>$(1); \
 485         fi; \
 486         if [ "$(USB)" = "USB" ]; then \
 487                 if [ "$(USBEXTRAS)" = "y" ]; then \
 488                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 489                         echo "CONFIG_E2FSCK=y" >>$(1); \
 490                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 491                         echo "CONFIG_MKE2FS=y" >>$(1); \
 492                         sed -i "/CONFIG_FDISK/d" $(1); \
 493                         echo "CONFIG_FDISK=y" >>$(1); \
 494                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 495                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 496                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 497                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 498                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 499                         echo "CONFIG_MKSWAP=y" >>$(1); \
 500                         sed -i "/CONFIG_FLOCK/d" $(1); \
 501                         echo "CONFIG_FLOCK=y" >>$(1); \
 502                         sed -i "/CONFIG_FSYNC/d" $(1); \
 503                         echo "CONFIG_FSYNC=y" >>$(1); \
 504                         sed -i "/CONFIG_TUNE2FS/d" $(1); \
 505                         echo "CONFIG_TUNE2FS=y" >>$(1); \
 506                         sed -i "/CONFIG_E2LABEL/d" $(1); \
 507                         echo "CONFIG_E2LABEL=y" >>$(1); \
 508                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 509                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 510                                 echo "CONFIG_LSUSB=y" >>$(1); \
 511                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 512                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 513                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 514                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 515                         fi; \
 516                 fi; \
 517         else \
 518                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 519                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 520                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 521                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 522                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 523                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 524                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 525                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 526                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 527                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 528                 sed -i "/CONFIG_BLKID/d" $(1); \
 529                 echo "# CONFIG_BLKID is not set" >>$(1); \
 530                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 531                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 532                 sed -i "/CONFIG_CHROOT/d" $(1); \
 533                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 534                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 535                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 536                 sed -i "/CONFIG_TRUE/d" $(1); \
 537                 echo "# CONFIG_TRUE is not set" >>$(1); \
 538         fi; \
 539         if [ "$(IPV6SUPP)" = "y" ]; then \
 540                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 541                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 542                 sed -i "/CONFIG_PING6/d" $(1); \
 543                 echo "CONFIG_PING6=y" >>$(1); \
 544                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 545                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 546                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 547                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 548                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 549                 fi; \
 550         fi; \
 551         if [ "$(SLIM)" = "y" ]; then \
 552                 sed -i "/CONFIG_AWK/d" $(1); \
 553                 echo "# CONFIG_AWK is not set" >>$(1); \
 554                 sed -i "/CONFIG_BASENAME/d" $(1); \
 555                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 556                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 557                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 558                 sed -i "/CONFIG_BLKID/d" $(1); \
 559                 echo "# CONFIG_BLKID is not set" >>$(1); \
 560                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 561                 echo "# CONFIG_TELNET is not set" >>$(1); \
 562                 sed -i "/CONFIG_ARPING/d" $(1); \
 563                 echo "# CONFIG_ARPING is not set" >>$(1); \
 564                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 565                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 566                 sed -i "/CONFIG_CHOWN/d" $(1); \
 567                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 568         else \
 569                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 570                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 571                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 572                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 573         fi; \
 574         )
 575 endef
 576
 577 define KernelConfig
 578         @( \
 579         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 580         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 581         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 582         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 583                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 584         else \
 585                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 586         fi; \
 587         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 588                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 589                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 590                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 591                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 592                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 593                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 594         fi; \
 595         if [ "$(UPS)" = "y" ]; then \
 596                 sed -i "/CONFIG_INPUT=m/d" $(1); \
 597                 echo "CONFIG_INPUT=y" >>$(1); \
 598                 sed -i "/CONFIG_USB=m/d" $(1); \
 599                 echo "CONFIG_USB=y" >>$(1); \
 600                 sed -i "/CONFIG_HID=m/d" $(1); \
 601                 echo "CONFIG_HID=y" >>$(1); \
 602                 sed -i "/CONFIG_USB_HID=m/d" $(1); \
 603                 echo "CONFIG_USB_HID=y" >>$(1); \
 604                 sed -i "/CONFIG_USB_HIDDEV=m/d" $(1); \
 605                 echo "CONFIG_USB_HIDDEV=y" >>$(1); \
 606                 sed -i "/CONFIG_USB_DEVICEFS=m/d" $(1); \
 607                 echo "CONFIG_USB_DEVICEFS=y" >>$(1); \
 608         fi; \
 609         if [ "$(USB)" = "" ]; then \
 610                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 611                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 612         fi; \
 613         if [ "$(IPV6SUPP)" = "y" ]; then \
 614                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 615                 echo "CONFIG_IPV6=y" >>$(1); \
 616                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 617                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 618                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 619                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 620                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 621                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 622                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 623                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 624                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 625                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 626                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 627                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 628                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 629                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 630                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 631                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 632                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 633                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 634                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 635                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 636                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 637                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 638                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 639                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 640                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 641                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 642                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 643                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 644                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 645                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 646                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 647                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 648                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 649                         sed -i "/CONFIG_INET6_XFRM_TUNNEL/d" $(1); \
 650                         echo "CONFIG_INET6_XFRM_TUNNEL=m" >>$(1); \
 651                         sed -i "/CONFIG_INET6_AH/d" $(1); \
 652                         echo "CONFIG_INET6_AH=m" >>$(1); \
 653                         sed -i "/CONFIG_INET6_ESP/d" $(1); \
 654                         echo "CONFIG_INET6_ESP=m" >>$(1); \
 655                         sed -i "/CONFIG_INET6_IPCOMP/d" $(1); \
 656                         echo "CONFIG_INET6_IPCOMP=m" >>$(1); \
 657                         sed -i "/CONFIG_INET6_XFRM_MODE_TRANSPORT/d" $(1); \
 658                         echo "CONFIG_INET6_XFRM_MODE_TRANSPORT=m" >>$(1); \
 659                         sed -i "/CONFIG_INET6_XFRM_MODE_TUNNEL/d" $(1); \
 660                         echo "CONFIG_INET6_XFRM_MODE_TUNNEL=m" >>$(1); \
 661                         sed -i "/CONFIG_INET6_XFRM_MODE_BEET/d" $(1); \
 662                         echo "CONFIG_INET6_XFRM_MODE_BEET=m" >>$(1); \
 663                 else \
 664                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 665                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 666                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 667                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 668                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 669                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 670                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 671                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 672                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 673                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 674                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 675                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 676                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 677                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 678                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 679                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 680                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 681                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 682                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 683                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 684                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 685                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 686                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 687                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 688                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 689                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 690                 fi; \
 691         fi; \
 692         sed -i "/CONFIG_BCM57XX/d" $(1); \
 693         if [ "$(BCM57)" = "y" ]; then \
 694                 echo "CONFIG_BCM57XX=m" >>$(1); \
 695         else \
 696                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 697         fi; \
 698         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 699                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 700                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 701                 if [ "$(IPV6SUPP)" = "y" ]; then \
 702                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 703                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 704                 fi; \
 705         fi; \
 706         )
 707 endef
 708
 709
 710 bin:
 711 ifeq ($(B),)
 712         @echo $@" is not a valid target!"
 713         @false
 714 endif
 715         @cp router/config_base router/config_$(lowercase_B)
 716         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 717         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 718
 719         $(call RouterOptions, router/config_$(lowercase_B))
 720         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 721         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 722
 723         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 724         @$(MAKE) all
 725
 726 ## mini-USB - K24 only
 727 n:
 728 ifneq ($(CONFIG_LINUX26),y)
 729         @$(MAKE) bin BBEXTRAS=y USBEXTRAS=y B=E BUILD_DESC="mini-USB" USB="USB"
 730 endif
 731
 732 ## VPN
 733 e:
 734 ifeq ($(CONFIG_LINUX26),y)
 735         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y MULTIWAN=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" DNSCRYPT=y PPTPD=y
 736 else
 737         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y B=E BUILD_DESC="$(VPN)" USB="USB" DNSCRYPT=y PPTPD=y
 738 endif
 739
 740 ## BTgui-VPN
 741 c:
 742 ifeq ($(CONFIG_LINUX26),y)
 743         @$(MAKE) bin NTFS=y OPENVPN=y BBEXTRAS=y USBEXTRAS=y MULTIWAN=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BTgui-VPN" USB="USB" BTGUI=y DNSCRYPT=y PPTPD=y
 744 else
 745         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="BTgui" USB="USB" BTGUI=y DNSCRYPT=y PPTPD=y
 746 endif
 747
 748 ## miniVPN (small BTgui-VPN) for routers with 8MB flash like Netgear 3500L, RT-N10u or RT-N15U
 749 a:
 750 ifeq ($(CONFIG_LINUX26),y)
 751         @$(MAKE) bin NTFS=y OPENVPN=y BBEXTRAS=y USBEXTRAS=y MULTIWAN=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="miniVPN" USB="USB" BTGUI=y PPTPD=y NO_JFFS=y
 752 endif
 753
 754 ## Nocat-VPN
 755 d:
 756 ifeq ($(CONFIG_LINUX26),y)
 757         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MULTIWAN=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Nocat-VPN" USB="USB" BTGUI=y NOCAT=y OPENVPN=y DNSCRYPT=y PPTPD=y
 758 else
 759         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Nocat-VPN" USB="USB" BTGUI=y NOCAT=y OPENVPN=y DNSCRYPT=y PPTPD=y
 760 endif
 761
 762 ## TOR-VPN
 763 g:
 764 ifeq ($(CONFIG_LINUX26),y)
 765         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MULTIWAN=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Tor-VPN" USB="USB" BTGUI=y TOR=y OPENVPN=y PPTPD=y NO_CIFS=y NO_JFFS=y
 766 else
 767         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Tor-VPN" USB="USB" BTGUI=y TOR=y OPENVPN=y PPTPD=y NO_CIFS=y NO_JFFS=y
 768 endif
 769
 770 ## BT
 771 u:
 772 ifeq ($(CONFIG_LINUX26),y)
 773         @$(MAKE) bin NTFS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y MULTIWAN=y IPV6SUPP=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y
 774 else
 775         @$(MAKE) bin NTFS=y USBEXTRAS=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y
 776 endif
 777
 778 ## BT-VPN
 779 t:
 780 ifeq ($(CONFIG_LINUX26),y)
 781         @$(MAKE) bin OPENVPN=y NTFS=y USBEXTRAS=y EBTABLES=y MULTIWAN=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y NO_JFFS=y PPTPD=y
 782 else
 783         @$(MAKE) bin OPENVPN=y NTFS=y USBEXTRAS=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y NO_JFFS=y PPTPD=y
 784 endif
 785
 786 ## Big-VPN
 787 b:
 788 ifeq ($(CONFIG_LINUX26),y)
 789         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MULTIWAN=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NFS=y NOCAT=y OPENVPN=y DNSCRYPT=y PPTPD=y NO_JFFS=y NO_CIFS=y
 790 else
 791         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NOCAT=y NFS=y OPENVPN=y DNSCRYPT=y PPTPD=y NO_JJFS=y NO_CIFS=y
 792 endif
 793
 794 ## Mega-VPN
 795 o:
 796 ifeq ($(CONFIG_LINUX26),y)
 797         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y MULTIWAN=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="Mega-VPN" USB="USB" NOCAT=y BTCLIENT=y DNSCRYPT=y SNMP=y UPS=y PPTPD=y TR_EXTRAS=y TOR=y IPSEC=y RAID=y DNSSEC=y TINC=y NANO=y
 798
 799 ## All-In-One (AIO) MIPS1 - only for router with more than 8MB flash!! ZTE H618B
 800 z:
 801         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y MULTIWAN=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="AIO" USB="USB" NOCAT=y BTCLIENT=y TR_EXTRAS=y NFS=y SNMP=y HFS=y DNSCRYPT=y UPS=y PPTPD=y TOR=y IPSEC=y RAID=y NGINX=y DNSSEC=y TINC=y NANO=y
 802 endif
 803
 804 #################################
 805
 806 ifeq ($(CONFIG_LINUX26),y)
 807
 808 ## Mini - targeted for Netgear routers
 809 f:
 810         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y B=F BUILD_DESC="Mini" USB="" MULTIWAN=y
 811
 812 ## MiniIPv6 - for 4MB routers
 813 i:
 814         @$(MAKE) bin NO_JFFS=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB="" NO_HTTPS=y MULTIWAN=y
 815
 816 ## MiniVPN - for 4MB routers
 817 j:
 818         @$(MAKE) bin NO_JFFS=y NO_CIFS=y NO_ZEBRA=y B=V BUILD_DESC="MiniVPN" USB="" PPTPD=y OPENVPN=y MULTIWAN=y
 819 endif
 820
 821 ## VPN with no USB support (IPv6 in K26 build)
 822 v:
 823 ifeq ($(CONFIG_LINUX26),y)
 824         @$(MAKE) bin OPENVPN=y NO_JFFS=y B=V BUILD_DESC="IPv6-$(VPN)" USB="" PPTPD=y IPV6SUPP=y MULTIWAN=y
 825 else
 826         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB="" PPTPD=y
 827 endif
 828
 829 ## Max build for router with 8MB flash without USB Support (like WRT54GS v1)
 830 m:
 831 ifeq ($(CONFIG_LINUX26),y)
 832         @$(MAKE) bin OPENVPN=y BBEXTRAS=y EBTABLES=y IPV6SUPP=y B=E BUILD_DESC="Max" USB="" NOCAT=y NFS=y SNMP=y DNSCRYPT=y PPTPD=y TOR=y IPSEC=y  MULTIWAN=y
 833 else
 834         @$(MAKE) bin OPENVPN=y BBEXTRAS=y B=E BUILD_DESC="Max" USB="" NOCAT=y NFS=y SNMP=y DNSCRYPT=y PPTPD=y TOR=y
 835 endif
 836
 837 ## SD-VPN - Only k24
 838 w:
 839 ifneq ($(CONFIG_LINUX26),y)
 840         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="SD-VPN" USB="" SDHC=y DNSCRYPT=y PPTPD=y
 841 endif
 842
 843
 844 ## Make Mips32r2 builds ##
 845
 846 #AIO MIPS2 for RT-N16 and E4200
 847 r2z:
 848         @$(MAKE) z MIPS32=r2
 849
 850 r2e:
 851         @$(MAKE) e MIPS32=r2
 852
 853 r2a:
 854         @$(MAKE) a MIPS32=r2
 855
 856 r2c:
 857         @$(MAKE) c MIPS32=r2
 858
 859 r2u:
 860         @$(MAKE) u MIPS32=r2
 861
 862 r2t:
 863         @$(MAKE) t MIPS32=r2
 864
 865 r2d:
 866         @$(MAKE) d MIPS32=r2
 867
 868 r2g:
 869         @$(MAKE) g MIPS32=r2
 870
 871 r2b:
 872         @$(MAKE) b MIPS32=r2
 873
 874 r2o:
 875         @$(MAKE) o MIPS32=r2
 876
 877 r2f:
 878         @$(MAKE) f MIPS32=r2 BELKIN=y
 879
 880 r2i:
 881         @$(MAKE) i MIPS32=r2
 882
 883 r2j:
 884         @$(MAKE) j MIPS32=r2
 885
 886 r2v:
 887         @$(MAKE) v MIPS32=r2
 888
 889 r2m:
 890         @$(MAKE) m MIPS32=r2
 891
 892 #AIO for E4200
 893 n60z:
 894         @$(MAKE) r2z NVRAM_SIZE=60 LINKSYS_E=1
 895
 896 n60e:
 897         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=1
 898
 899 n60c:
 900         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=1
 901
 902 n60u:
 903         @$(MAKE) r2u NVRAM_SIZE=60 LINKSYS_E=1
 904
 905 n60t:
 906         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=1
 907
 908 n60b:
 909         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=1
 910
 911 n60d:
 912         @$(MAKE) r2d NVRAM_SIZE=60 LINKSYS_E=1
 913
 914 n60g:
 915         @$(MAKE) r2g NVRAM_SIZE=60 LINKSYS_E=1
 916
 917 n60o:
 918         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=1
 919
 920 n60v:
 921         @$(MAKE) r2v NVRAM_SIZE=60 LINKSYS_E=1
 922
 923 n60m:
 924         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=1
 925
 926 setprofile:
 927         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 928         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 929         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 930         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 931         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 932         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 933         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 934         echo '#define TOMATO_BUILD_DESC "$(DESC)"' >> router/shared/tomato_profile.h
 935         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 936         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 937         echo '#endif' >> router/shared/tomato_profile.h
 938         echo '#endif' >> router/shared/tomato_profile.h
 939
 940         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 941         echo 'PROFILE_G = 1' >> tomato_profile.mak
 942         echo 'PROFILE_N = 2' >> tomato_profile.mak
 943         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 944         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 945         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 946         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 947         echo 'TOMATO_BUILD_DESC = "$(DESC)"' >> tomato_profile.mak
 948         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 949         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 950         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 951
 952         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 953
 954 # Note that changes to variables in tomato_profile.mak don't
 955 # get propogated to this invocation of make!
 956         @echo ""
 957         @echo "Using $(N) profile, $(B) build config."
 958         @echo ""
 959
 960         @cd $(LINUXDIR) ; \
 961                 rm -f config_current ; \
 962                 ln -s config_$(lowercase_B) config_current ; \
 963                 cp -f config_current .config
 964
 965         @cd router/busybox && \
 966                 rm -f config_current ; \
 967                 ln -s config_$(lowercase_B) config_current ; \
 968                 cp config_current .config
 969
 970         @cd router ; \
 971                 rm -f config_current ; \
 972                 ln -s config_$(lowercase_B) config_current ; \
 973                 cp config_current .config
 974
 975         @$(MAKE) -C router oldconfig
 976
 977 help:
 978         @echo "n            Mini-USB - for oruter with 4MB flash and USB port - K24 only"
 979         @echo "e            VPN - (standard plus VPN, extra utilities and NTFS support)"
 980         @echo "c            BTgui-VPN - (Ext plus BT gui)"
 981         @echo "d            Nocat-VPN - (BTgui plus VPN plus Nocat)"
 982         @echo "g            Tor-VPN - (BTgui plus VPN plus TOR Project)"
 983         @echo "t            BT-VPN - (BT plus VPN)"
 984         @echo "b            Big-VPN - (Big plus VPN)"
 985         @echo "o            Mega-VPN - (Mega plus VPN plus NOCAT minus NFS)"
 986 ifeq ($(CONFIG_LINUX26),y)
 987         @echo "z            MIPS Release 15F AIO (for routers +8MB flash)"
 988         @echo "i            MiniIPv6 - (IPv6 with no USB support minus CIFS and RIPv1/2)"
 989         @echo "j            MiniVPN - (VPN with no USB support minus CIFS and RIPv1/2)"
 990 endif
 991         @echo "f            Mini - (no USB support minus CIFS and RIPv1/2)"
 992         @echo "v            VPN (no usb) - (VPN with no USB support)" / in K26 + IPv6 support
 993         @echo "m            Max (no usb) - (Max with no USB support)" / in K26 + IPv6 support
 994         @echo "w            SD-VPN (no usb) - (VPN with SD-MOD and no USB support)"
 995 ifeq ($(CONFIG_LINUX26),y)
 996         @echo "r2e          MIPS Release 2 VPN"
 997         @echo "r2c          MIPS Release 2 BTgui-VPN"
 998         @echo "r2d          MIPS Release 2 Nocat-VPN"
 999         @echo "r2g          MIPS Release 2 Tor-VPN"
1000         @echo "r2t          MIPS Release 2 BT-VPN"
1001         @echo "r2b          MIPS Release 2 Big-VPN"
1002         @echo "r2o          MIPS Release 2 Mega-VPN (for routers +8MB flash)"
1003         @echo "r2z          MIPS Release 2 AIO (for routers +8MB flash)"
1004         @echo "r2v          MIPS Release 2 VPN (no usb)"
1005         @echo "r2m          MIPS Release 2 Max (no usb)"
1006         @echo "r2i          MIPS Release 2 MiniIPv6 (for 4MB flash)"
1007         @echo "r2j          MIPS Release 2 MiniVPN (for 4MB flash)"
1008         @echo "r2f          MIPS Release 2 Mini (for netgear)"
1009         @echo "n60e         Linksys E-series build VPN"
1010         @echo "n60c         Linksys E-series build BTGui-VPN"
1011         @echo "n60d         Linksys E-series build BTGui-VPN plus Nocat"
1012         @echo "n60g         Linksys E-series build BTGui-VPN plus TOR Project"
1013         @echo "n60t         Linksys E-series build BT-VPN"
1014         @echo "n60b         Linksys E-series build Big-VPN"
1015         @echo "n60o         Linksys E-series build Mega-VPN"
1016         @echo "n60z         Linksys E-series build AIO"
1017         @echo "n60v         Linksys E-series build IPv6-VPN for E2000"
1018         @echo "n60m         Linksys E-series build Max for E2000"
1019 endif
1020         @echo "..etc..      other build configs"
1021         @echo "clean        -C router clean"
1022         @echo "cleanimage   rm -rf image"
1023         @echo "cleantools   clean btools, mksquashfs"
1024         @echo "cleankernel  -C Linux distclean (but preserves .config)"
1025         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
1026         @echo "prepk        -C Linux oldconfig dep"
1027
1028 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
1029 .PHONY: a b c d m nc Makefile allversions tomato_profile.mak