64c08a434275728f0e2910857d1dc55ae8b304d8
[qemu/qemu-JZ.git] / hw / pc.c
blob64c08a434275728f0e2910857d1dc55ae8b304d8
1 /*
2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "pc.h"
26 #include "fdc.h"
27 #include "pci.h"
28 #include "block.h"
29 #include "sysemu.h"
30 #include "audio/audio.h"
31 #include "net.h"
32 #include "smbus.h"
33 #include "boards.h"
34 #include "console.h"
35 #include "fw_cfg.h"
36 #include "virtio-blk.h"
37 #include "virtio-balloon.h"
38 #include "hpet_emul.h"
40 /* output Bochs bios info messages */
41 //#define DEBUG_BIOS
43 #define BIOS_FILENAME "bios.bin"
44 #define VGABIOS_FILENAME "vgabios.bin"
45 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
47 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
49 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
50 #define ACPI_DATA_SIZE 0x10000
51 #define BIOS_CFG_IOPORT 0x510
53 #define MAX_IDE_BUS 2
55 static fdctrl_t *floppy_controller;
56 static RTCState *rtc_state;
57 static PITState *pit;
58 static IOAPICState *ioapic;
59 static PCIDevice *i440fx_state;
61 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
65 /* MSDOS compatibility mode FPU exception support */
66 static qemu_irq ferr_irq;
67 /* XXX: add IGNNE support */
68 void cpu_set_ferr(CPUX86State *s)
70 qemu_irq_raise(ferr_irq);
73 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
75 qemu_irq_lower(ferr_irq);
78 /* TSC handling */
79 uint64_t cpu_get_tsc(CPUX86State *env)
81 /* Note: when using kqemu, it is more logical to return the host TSC
82 because kqemu does not trap the RDTSC instruction for
83 performance reasons */
84 #ifdef USE_KQEMU
85 if (env->kqemu_enabled) {
86 return cpu_get_real_ticks();
87 } else
88 #endif
90 return cpu_get_ticks();
94 /* SMM support */
95 void cpu_smm_update(CPUState *env)
97 if (i440fx_state && env == first_cpu)
98 i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
102 /* IRQ handling */
103 int cpu_get_pic_interrupt(CPUState *env)
105 int intno;
107 intno = apic_get_interrupt(env);
108 if (intno >= 0) {
109 /* set irq request if a PIC irq is still pending */
110 /* XXX: improve that */
111 pic_update_irq(isa_pic);
112 return intno;
114 /* read the irq from the PIC */
115 if (!apic_accept_pic_intr(env))
116 return -1;
118 intno = pic_read_irq(isa_pic);
119 return intno;
122 static void pic_irq_request(void *opaque, int irq, int level)
124 CPUState *env = first_cpu;
126 if (env->apic_state) {
127 while (env) {
128 if (apic_accept_pic_intr(env))
129 apic_deliver_pic_intr(env, level);
130 env = env->next_cpu;
132 } else {
133 if (level)
134 cpu_interrupt(env, CPU_INTERRUPT_HARD);
135 else
136 cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
140 /* PC cmos mappings */
142 #define REG_EQUIPMENT_BYTE 0x14
144 static int cmos_get_fd_drive_type(int fd0)
146 int val;
148 switch (fd0) {
149 case 0:
150 /* 1.44 Mb 3"5 drive */
151 val = 4;
152 break;
153 case 1:
154 /* 2.88 Mb 3"5 drive */
155 val = 5;
156 break;
157 case 2:
158 /* 1.2 Mb 5"5 drive */
159 val = 2;
160 break;
161 default:
162 val = 0;
163 break;
165 return val;
168 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
170 RTCState *s = rtc_state;
171 int cylinders, heads, sectors;
172 bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
173 rtc_set_memory(s, type_ofs, 47);
174 rtc_set_memory(s, info_ofs, cylinders);
175 rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
176 rtc_set_memory(s, info_ofs + 2, heads);
177 rtc_set_memory(s, info_ofs + 3, 0xff);
178 rtc_set_memory(s, info_ofs + 4, 0xff);
179 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
180 rtc_set_memory(s, info_ofs + 6, cylinders);
181 rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
182 rtc_set_memory(s, info_ofs + 8, sectors);
185 /* convert boot_device letter to something recognizable by the bios */
186 static int boot_device2nibble(char boot_device)
188 switch(boot_device) {
189 case 'a':
190 case 'b':
191 return 0x01; /* floppy boot */
192 case 'c':
193 return 0x02; /* hard drive boot */
194 case 'd':
195 return 0x03; /* CD-ROM boot */
196 case 'n':
197 return 0x04; /* Network boot */
199 return 0;
202 /* copy/pasted from cmos_init, should be made a general function
203 and used there as well */
204 static int pc_boot_set(void *opaque, const char *boot_device)
206 #define PC_MAX_BOOT_DEVICES 3
207 RTCState *s = (RTCState *)opaque;
208 int nbds, bds[3] = { 0, };
209 int i;
211 nbds = strlen(boot_device);
212 if (nbds > PC_MAX_BOOT_DEVICES) {
213 term_printf("Too many boot devices for PC\n");
214 return(1);
216 for (i = 0; i < nbds; i++) {
217 bds[i] = boot_device2nibble(boot_device[i]);
218 if (bds[i] == 0) {
219 term_printf("Invalid boot device for PC: '%c'\n",
220 boot_device[i]);
221 return(1);
224 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
225 rtc_set_memory(s, 0x38, (bds[2] << 4));
226 return(0);
229 /* hd_table must contain 4 block drivers */
230 static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
231 const char *boot_device, BlockDriverState **hd_table)
233 RTCState *s = rtc_state;
234 int nbds, bds[3] = { 0, };
235 int val;
236 int fd0, fd1, nb;
237 int i;
239 /* various important CMOS locations needed by PC/Bochs bios */
241 /* memory size */
242 val = 640; /* base memory in K */
243 rtc_set_memory(s, 0x15, val);
244 rtc_set_memory(s, 0x16, val >> 8);
246 val = (ram_size / 1024) - 1024;
247 if (val > 65535)
248 val = 65535;
249 rtc_set_memory(s, 0x17, val);
250 rtc_set_memory(s, 0x18, val >> 8);
251 rtc_set_memory(s, 0x30, val);
252 rtc_set_memory(s, 0x31, val >> 8);
254 if (above_4g_mem_size) {
255 rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
256 rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
257 rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
260 if (ram_size > (16 * 1024 * 1024))
261 val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
262 else
263 val = 0;
264 if (val > 65535)
265 val = 65535;
266 rtc_set_memory(s, 0x34, val);
267 rtc_set_memory(s, 0x35, val >> 8);
269 /* set the number of CPU */
270 rtc_set_memory(s, 0x5f, smp_cpus - 1);
272 /* set boot devices, and disable floppy signature check if requested */
273 #define PC_MAX_BOOT_DEVICES 3
274 nbds = strlen(boot_device);
275 if (nbds > PC_MAX_BOOT_DEVICES) {
276 fprintf(stderr, "Too many boot devices for PC\n");
277 exit(1);
279 for (i = 0; i < nbds; i++) {
280 bds[i] = boot_device2nibble(boot_device[i]);
281 if (bds[i] == 0) {
282 fprintf(stderr, "Invalid boot device for PC: '%c'\n",
283 boot_device[i]);
284 exit(1);
287 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
288 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
290 /* floppy type */
292 fd0 = fdctrl_get_drive_type(floppy_controller, 0);
293 fd1 = fdctrl_get_drive_type(floppy_controller, 1);
295 val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
296 rtc_set_memory(s, 0x10, val);
298 val = 0;
299 nb = 0;
300 if (fd0 < 3)
301 nb++;
302 if (fd1 < 3)
303 nb++;
304 switch (nb) {
305 case 0:
306 break;
307 case 1:
308 val |= 0x01; /* 1 drive, ready for boot */
309 break;
310 case 2:
311 val |= 0x41; /* 2 drives, ready for boot */
312 break;
314 val |= 0x02; /* FPU is there */
315 val |= 0x04; /* PS/2 mouse installed */
316 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
318 /* hard drives */
320 rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
321 if (hd_table[0])
322 cmos_init_hd(0x19, 0x1b, hd_table[0]);
323 if (hd_table[1])
324 cmos_init_hd(0x1a, 0x24, hd_table[1]);
326 val = 0;
327 for (i = 0; i < 4; i++) {
328 if (hd_table[i]) {
329 int cylinders, heads, sectors, translation;
330 /* NOTE: bdrv_get_geometry_hint() returns the physical
331 geometry. It is always such that: 1 <= sects <= 63, 1
332 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
333 geometry can be different if a translation is done. */
334 translation = bdrv_get_translation_hint(hd_table[i]);
335 if (translation == BIOS_ATA_TRANSLATION_AUTO) {
336 bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
337 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
338 /* No translation. */
339 translation = 0;
340 } else {
341 /* LBA translation. */
342 translation = 1;
344 } else {
345 translation--;
347 val |= translation << (i * 2);
350 rtc_set_memory(s, 0x39, val);
353 void ioport_set_a20(int enable)
355 /* XXX: send to all CPUs ? */
356 cpu_x86_set_a20(first_cpu, enable);
359 int ioport_get_a20(void)
361 return ((first_cpu->a20_mask >> 20) & 1);
364 static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
366 ioport_set_a20((val >> 1) & 1);
367 /* XXX: bit 0 is fast reset */
370 static uint32_t ioport92_read(void *opaque, uint32_t addr)
372 return ioport_get_a20() << 1;
375 /***********************************************************/
376 /* Bochs BIOS debug ports */
378 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
380 static const char shutdown_str[8] = "Shutdown";
381 static int shutdown_index = 0;
383 switch(addr) {
384 /* Bochs BIOS messages */
385 case 0x400:
386 case 0x401:
387 fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
388 exit(1);
389 case 0x402:
390 case 0x403:
391 #ifdef DEBUG_BIOS
392 fprintf(stderr, "%c", val);
393 #endif
394 break;
395 case 0x8900:
396 /* same as Bochs power off */
397 if (val == shutdown_str[shutdown_index]) {
398 shutdown_index++;
399 if (shutdown_index == 8) {
400 shutdown_index = 0;
401 qemu_system_shutdown_request();
403 } else {
404 shutdown_index = 0;
406 break;
408 /* LGPL'ed VGA BIOS messages */
409 case 0x501:
410 case 0x502:
411 fprintf(stderr, "VGA BIOS panic, line %d\n", val);
412 exit(1);
413 case 0x500:
414 case 0x503:
415 #ifdef DEBUG_BIOS
416 fprintf(stderr, "%c", val);
417 #endif
418 break;
422 static void bochs_bios_init(void)
424 void *fw_cfg;
426 register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
427 register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
428 register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
429 register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
430 register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
432 register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
433 register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
434 register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
435 register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
437 fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
438 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
439 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
442 /* Generate an initial boot sector which sets state and jump to
443 a specified vector */
444 static void generate_bootsect(uint8_t *option_rom,
445 uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
447 uint8_t rom[512], *p, *reloc;
448 uint8_t sum;
449 int i;
451 memset(rom, 0, sizeof(rom));
453 p = rom;
454 /* Make sure we have an option rom signature */
455 *p++ = 0x55;
456 *p++ = 0xaa;
458 /* ROM size in sectors*/
459 *p++ = 1;
461 /* Hook int19 */
463 *p++ = 0x50; /* push ax */
464 *p++ = 0x1e; /* push ds */
465 *p++ = 0x31; *p++ = 0xc0; /* xor ax, ax */
466 *p++ = 0x8e; *p++ = 0xd8; /* mov ax, ds */
468 *p++ = 0xc7; *p++ = 0x06; /* movvw _start,0x64 */
469 *p++ = 0x64; *p++ = 0x00;
470 reloc = p;
471 *p++ = 0x00; *p++ = 0x00;
473 *p++ = 0x8c; *p++ = 0x0e; /* mov cs,0x66 */
474 *p++ = 0x66; *p++ = 0x00;
476 *p++ = 0x1f; /* pop ds */
477 *p++ = 0x58; /* pop ax */
478 *p++ = 0xcb; /* lret */
480 /* Actual code */
481 *reloc = (p - rom);
483 *p++ = 0xfa; /* CLI */
484 *p++ = 0xfc; /* CLD */
486 for (i = 0; i < 6; i++) {
487 if (i == 1) /* Skip CS */
488 continue;
490 *p++ = 0xb8; /* MOV AX,imm16 */
491 *p++ = segs[i];
492 *p++ = segs[i] >> 8;
493 *p++ = 0x8e; /* MOV <seg>,AX */
494 *p++ = 0xc0 + (i << 3);
497 for (i = 0; i < 8; i++) {
498 *p++ = 0x66; /* 32-bit operand size */
499 *p++ = 0xb8 + i; /* MOV <reg>,imm32 */
500 *p++ = gpr[i];
501 *p++ = gpr[i] >> 8;
502 *p++ = gpr[i] >> 16;
503 *p++ = gpr[i] >> 24;
506 *p++ = 0xea; /* JMP FAR */
507 *p++ = ip; /* IP */
508 *p++ = ip >> 8;
509 *p++ = segs[1]; /* CS */
510 *p++ = segs[1] >> 8;
512 /* sign rom */
513 sum = 0;
514 for (i = 0; i < (sizeof(rom) - 1); i++)
515 sum += rom[i];
516 rom[sizeof(rom) - 1] = -sum;
518 memcpy(option_rom, rom, sizeof(rom));
521 static long get_file_size(FILE *f)
523 long where, size;
525 /* XXX: on Unix systems, using fstat() probably makes more sense */
527 where = ftell(f);
528 fseek(f, 0, SEEK_END);
529 size = ftell(f);
530 fseek(f, where, SEEK_SET);
532 return size;
535 static void load_linux(uint8_t *option_rom,
536 const char *kernel_filename,
537 const char *initrd_filename,
538 const char *kernel_cmdline)
540 uint16_t protocol;
541 uint32_t gpr[8];
542 uint16_t seg[6];
543 uint16_t real_seg;
544 int setup_size, kernel_size, initrd_size, cmdline_size;
545 uint32_t initrd_max;
546 uint8_t header[1024];
547 target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr;
548 FILE *f, *fi;
550 /* Align to 16 bytes as a paranoia measure */
551 cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
553 /* load the kernel header */
554 f = fopen(kernel_filename, "rb");
555 if (!f || !(kernel_size = get_file_size(f)) ||
556 fread(header, 1, 1024, f) != 1024) {
557 fprintf(stderr, "qemu: could not load kernel '%s'\n",
558 kernel_filename);
559 exit(1);
562 /* kernel protocol version */
563 #if 0
564 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
565 #endif
566 if (ldl_p(header+0x202) == 0x53726448)
567 protocol = lduw_p(header+0x206);
568 else
569 protocol = 0;
571 if (protocol < 0x200 || !(header[0x211] & 0x01)) {
572 /* Low kernel */
573 real_addr = 0x90000;
574 cmdline_addr = 0x9a000 - cmdline_size;
575 prot_addr = 0x10000;
576 } else if (protocol < 0x202) {
577 /* High but ancient kernel */
578 real_addr = 0x90000;
579 cmdline_addr = 0x9a000 - cmdline_size;
580 prot_addr = 0x100000;
581 } else {
582 /* High and recent kernel */
583 real_addr = 0x10000;
584 cmdline_addr = 0x20000;
585 prot_addr = 0x100000;
588 #if 0
589 fprintf(stderr,
590 "qemu: real_addr = 0x" TARGET_FMT_plx "\n"
591 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
592 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
593 real_addr,
594 cmdline_addr,
595 prot_addr);
596 #endif
598 /* highest address for loading the initrd */
599 if (protocol >= 0x203)
600 initrd_max = ldl_p(header+0x22c);
601 else
602 initrd_max = 0x37ffffff;
604 if (initrd_max >= ram_size-ACPI_DATA_SIZE)
605 initrd_max = ram_size-ACPI_DATA_SIZE-1;
607 /* kernel command line */
608 pstrcpy_targphys(cmdline_addr, 4096, kernel_cmdline);
610 if (protocol >= 0x202) {
611 stl_p(header+0x228, cmdline_addr);
612 } else {
613 stw_p(header+0x20, 0xA33F);
614 stw_p(header+0x22, cmdline_addr-real_addr);
617 /* loader type */
618 /* High nybble = B reserved for Qemu; low nybble is revision number.
619 If this code is substantially changed, you may want to consider
620 incrementing the revision. */
621 if (protocol >= 0x200)
622 header[0x210] = 0xB0;
624 /* heap */
625 if (protocol >= 0x201) {
626 header[0x211] |= 0x80; /* CAN_USE_HEAP */
627 stw_p(header+0x224, cmdline_addr-real_addr-0x200);
630 /* load initrd */
631 if (initrd_filename) {
632 if (protocol < 0x200) {
633 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
634 exit(1);
637 fi = fopen(initrd_filename, "rb");
638 if (!fi) {
639 fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
640 initrd_filename);
641 exit(1);
644 initrd_size = get_file_size(fi);
645 initrd_addr = (initrd_max-initrd_size) & ~4095;
647 fprintf(stderr, "qemu: loading initrd (%#x bytes) at 0x" TARGET_FMT_plx
648 "\n", initrd_size, initrd_addr);
650 if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
651 fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
652 initrd_filename);
653 exit(1);
655 fclose(fi);
657 stl_p(header+0x218, initrd_addr);
658 stl_p(header+0x21c, initrd_size);
661 /* store the finalized header and load the rest of the kernel */
662 cpu_physical_memory_write(real_addr, header, 1024);
664 setup_size = header[0x1f1];
665 if (setup_size == 0)
666 setup_size = 4;
668 setup_size = (setup_size+1)*512;
669 kernel_size -= setup_size; /* Size of protected-mode code */
671 if (!fread_targphys_ok(real_addr+1024, setup_size-1024, f) ||
672 !fread_targphys_ok(prot_addr, kernel_size, f)) {
673 fprintf(stderr, "qemu: read error on kernel '%s'\n",
674 kernel_filename);
675 exit(1);
677 fclose(f);
679 /* generate bootsector to set up the initial register state */
680 real_seg = real_addr >> 4;
681 seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
682 seg[1] = real_seg+0x20; /* CS */
683 memset(gpr, 0, sizeof gpr);
684 gpr[4] = cmdline_addr-real_addr-16; /* SP (-16 is paranoia) */
686 generate_bootsect(option_rom, gpr, seg, 0);
689 static void main_cpu_reset(void *opaque)
691 CPUState *env = opaque;
692 cpu_reset(env);
695 static const int ide_iobase[2] = { 0x1f0, 0x170 };
696 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
697 static const int ide_irq[2] = { 14, 15 };
699 #define NE2000_NB_MAX 6
701 static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
702 static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
704 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
705 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
707 static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
708 static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
710 #ifdef HAS_AUDIO
711 static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
713 struct soundhw *c;
714 int audio_enabled = 0;
716 for (c = soundhw; !audio_enabled && c->name; ++c) {
717 audio_enabled = c->enabled;
720 if (audio_enabled) {
721 AudioState *s;
723 s = AUD_init ();
724 if (s) {
725 for (c = soundhw; c->name; ++c) {
726 if (c->enabled) {
727 if (c->isa) {
728 c->init.init_isa (s, pic);
730 else {
731 if (pci_bus) {
732 c->init.init_pci (pci_bus, s);
740 #endif
742 static void pc_init_ne2k_isa(NICInfo *nd, qemu_irq *pic)
744 static int nb_ne2k = 0;
746 if (nb_ne2k == NE2000_NB_MAX)
747 return;
748 isa_ne2000_init(ne2000_io[nb_ne2k], pic[ne2000_irq[nb_ne2k]], nd);
749 nb_ne2k++;
752 /* PC hardware initialisation */
753 static void pc_init1(ram_addr_t ram_size, int vga_ram_size,
754 const char *boot_device, DisplayState *ds,
755 const char *kernel_filename, const char *kernel_cmdline,
756 const char *initrd_filename,
757 int pci_enabled, const char *cpu_model)
759 char buf[1024];
760 int ret, linux_boot, i;
761 ram_addr_t ram_addr, vga_ram_addr, bios_offset, vga_bios_offset;
762 ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
763 int bios_size, isa_bios_size, vga_bios_size;
764 PCIBus *pci_bus;
765 int piix3_devfn = -1;
766 CPUState *env;
767 NICInfo *nd;
768 qemu_irq *cpu_irq;
769 qemu_irq *i8259;
770 int index;
771 BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
772 BlockDriverState *fd[MAX_FD];
774 if (ram_size >= 0xe0000000 ) {
775 above_4g_mem_size = ram_size - 0xe0000000;
776 below_4g_mem_size = 0xe0000000;
777 } else {
778 below_4g_mem_size = ram_size;
781 linux_boot = (kernel_filename != NULL);
783 /* init CPUs */
784 if (cpu_model == NULL) {
785 #ifdef TARGET_X86_64
786 cpu_model = "qemu64";
787 #else
788 cpu_model = "qemu32";
789 #endif
792 for(i = 0; i < smp_cpus; i++) {
793 env = cpu_init(cpu_model);
794 if (!env) {
795 fprintf(stderr, "Unable to find x86 CPU definition\n");
796 exit(1);
798 if (i != 0)
799 env->halted = 1;
800 if (smp_cpus > 1) {
801 /* XXX: enable it in all cases */
802 env->cpuid_features |= CPUID_APIC;
804 qemu_register_reset(main_cpu_reset, env);
805 if (pci_enabled) {
806 apic_init(env);
810 vmport_init();
812 /* allocate RAM */
813 ram_addr = qemu_ram_alloc(0xa0000);
814 cpu_register_physical_memory(0, 0xa0000, ram_addr);
816 /* Allocate, even though we won't register, so we don't break the
817 * phys_ram_base + PA assumption. This range includes vga (0xa0000 - 0xc0000),
818 * and some bios areas, which will be registered later
820 ram_addr = qemu_ram_alloc(0x100000 - 0xa0000);
821 ram_addr = qemu_ram_alloc(below_4g_mem_size - 0x100000);
822 cpu_register_physical_memory(0x100000,
823 below_4g_mem_size - 0x100000,
824 ram_addr);
826 /* above 4giga memory allocation */
827 if (above_4g_mem_size > 0) {
828 ram_addr = qemu_ram_alloc(above_4g_mem_size);
829 cpu_register_physical_memory(0x100000000ULL,
830 above_4g_mem_size,
831 ram_addr);
835 /* allocate VGA RAM */
836 vga_ram_addr = qemu_ram_alloc(vga_ram_size);
838 /* BIOS load */
839 if (bios_name == NULL)
840 bios_name = BIOS_FILENAME;
841 snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
842 bios_size = get_image_size(buf);
843 if (bios_size <= 0 ||
844 (bios_size % 65536) != 0) {
845 goto bios_error;
847 bios_offset = qemu_ram_alloc(bios_size);
848 ret = load_image(buf, phys_ram_base + bios_offset);
849 if (ret != bios_size) {
850 bios_error:
851 fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", buf);
852 exit(1);
855 /* VGA BIOS load */
856 if (cirrus_vga_enabled) {
857 snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_CIRRUS_FILENAME);
858 } else {
859 snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
861 vga_bios_size = get_image_size(buf);
862 if (vga_bios_size <= 0 || vga_bios_size > 65536)
863 goto vga_bios_error;
864 vga_bios_offset = qemu_ram_alloc(65536);
866 ret = load_image(buf, phys_ram_base + vga_bios_offset);
867 if (ret != vga_bios_size) {
868 vga_bios_error:
869 fprintf(stderr, "qemu: could not load VGA BIOS '%s'\n", buf);
870 exit(1);
873 /* setup basic memory access */
874 cpu_register_physical_memory(0xc0000, 0x10000,
875 vga_bios_offset | IO_MEM_ROM);
877 /* map the last 128KB of the BIOS in ISA space */
878 isa_bios_size = bios_size;
879 if (isa_bios_size > (128 * 1024))
880 isa_bios_size = 128 * 1024;
881 cpu_register_physical_memory(0x100000 - isa_bios_size,
882 isa_bios_size,
883 (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
886 ram_addr_t option_rom_offset;
887 int size, offset;
889 offset = 0;
890 if (linux_boot) {
891 option_rom_offset = qemu_ram_alloc(TARGET_PAGE_SIZE);
892 load_linux(phys_ram_base + option_rom_offset,
893 kernel_filename, initrd_filename, kernel_cmdline);
894 cpu_register_physical_memory(0xd0000, TARGET_PAGE_SIZE,
895 option_rom_offset | IO_MEM_ROM);
896 offset = TARGET_PAGE_SIZE;
899 for (i = 0; i < nb_option_roms; i++) {
900 size = get_image_size(option_rom[i]);
901 if (size < 0) {
902 fprintf(stderr, "Could not load option rom '%s'\n",
903 option_rom[i]);
904 exit(1);
906 if (size > (0x10000 - offset))
907 goto option_rom_error;
908 option_rom_offset = qemu_ram_alloc(size);
909 ret = load_image(option_rom[i], phys_ram_base + option_rom_offset);
910 if (ret != size) {
911 option_rom_error:
912 fprintf(stderr, "Too many option ROMS\n");
913 exit(1);
915 size = (size + 4095) & ~4095;
916 cpu_register_physical_memory(0xd0000 + offset,
917 size, option_rom_offset | IO_MEM_ROM);
918 offset += size;
922 /* map all the bios at the top of memory */
923 cpu_register_physical_memory((uint32_t)(-bios_size),
924 bios_size, bios_offset | IO_MEM_ROM);
926 bochs_bios_init();
928 cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
929 i8259 = i8259_init(cpu_irq[0]);
930 ferr_irq = i8259[13];
932 if (pci_enabled) {
933 pci_bus = i440fx_init(&i440fx_state, i8259);
934 piix3_devfn = piix3_init(pci_bus, -1);
935 } else {
936 pci_bus = NULL;
939 /* init basic PC hardware */
940 register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
942 register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
944 if (cirrus_vga_enabled) {
945 if (pci_enabled) {
946 pci_cirrus_vga_init(pci_bus,
947 ds, phys_ram_base + vga_ram_addr,
948 vga_ram_addr, vga_ram_size);
949 } else {
950 isa_cirrus_vga_init(ds, phys_ram_base + vga_ram_addr,
951 vga_ram_addr, vga_ram_size);
953 } else if (vmsvga_enabled) {
954 if (pci_enabled)
955 pci_vmsvga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
956 vga_ram_addr, vga_ram_size);
957 else
958 fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
959 } else {
960 if (pci_enabled) {
961 pci_vga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
962 vga_ram_addr, vga_ram_size, 0, 0);
963 } else {
964 isa_vga_init(ds, phys_ram_base + vga_ram_addr,
965 vga_ram_addr, vga_ram_size);
969 rtc_state = rtc_init(0x70, i8259[8]);
971 qemu_register_boot_set(pc_boot_set, rtc_state);
973 register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
974 register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
976 if (pci_enabled) {
977 ioapic = ioapic_init();
979 pit = pit_init(0x40, i8259[0]);
980 pcspk_init(pit);
981 if (!no_hpet) {
982 hpet_init(i8259);
984 if (pci_enabled) {
985 pic_set_alt_irq_func(isa_pic, ioapic_set_irq, ioapic);
988 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
989 if (serial_hds[i]) {
990 serial_init(serial_io[i], i8259[serial_irq[i]], 115200,
991 serial_hds[i]);
995 for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
996 if (parallel_hds[i]) {
997 parallel_init(parallel_io[i], i8259[parallel_irq[i]],
998 parallel_hds[i]);
1002 for(i = 0; i < nb_nics; i++) {
1003 nd = &nd_table[i];
1004 if (!nd->model) {
1005 if (pci_enabled) {
1006 nd->model = "ne2k_pci";
1007 } else {
1008 nd->model = "ne2k_isa";
1011 if (strcmp(nd->model, "ne2k_isa") == 0) {
1012 pc_init_ne2k_isa(nd, i8259);
1013 } else if (pci_enabled) {
1014 if (strcmp(nd->model, "?") == 0)
1015 fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
1016 pci_nic_init(pci_bus, nd, -1);
1017 } else if (strcmp(nd->model, "?") == 0) {
1018 fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
1019 exit(1);
1020 } else {
1021 fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
1022 exit(1);
1026 if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
1027 fprintf(stderr, "qemu: too many IDE bus\n");
1028 exit(1);
1031 for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
1032 index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
1033 if (index != -1)
1034 hd[i] = drives_table[index].bdrv;
1035 else
1036 hd[i] = NULL;
1039 if (pci_enabled) {
1040 pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
1041 } else {
1042 for(i = 0; i < MAX_IDE_BUS; i++) {
1043 isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
1044 hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
1048 i8042_init(i8259[1], i8259[12], 0x60);
1049 DMA_init(0);
1050 #ifdef HAS_AUDIO
1051 audio_init(pci_enabled ? pci_bus : NULL, i8259);
1052 #endif
1054 for(i = 0; i < MAX_FD; i++) {
1055 index = drive_get_index(IF_FLOPPY, 0, i);
1056 if (index != -1)
1057 fd[i] = drives_table[index].bdrv;
1058 else
1059 fd[i] = NULL;
1061 floppy_controller = fdctrl_init(i8259[6], 2, 0, 0x3f0, fd);
1063 cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
1065 if (pci_enabled && usb_enabled) {
1066 usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
1069 if (pci_enabled && acpi_enabled) {
1070 uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
1071 i2c_bus *smbus;
1073 /* TODO: Populate SPD eeprom data. */
1074 smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100, i8259[9]);
1075 for (i = 0; i < 8; i++) {
1076 smbus_eeprom_device_init(smbus, 0x50 + i, eeprom_buf + (i * 256));
1080 if (i440fx_state) {
1081 i440fx_init_memory_mappings(i440fx_state);
1084 if (pci_enabled) {
1085 int max_bus;
1086 int bus, unit;
1087 void *scsi;
1089 max_bus = drive_get_max_bus(IF_SCSI);
1091 for (bus = 0; bus <= max_bus; bus++) {
1092 scsi = lsi_scsi_init(pci_bus, -1);
1093 for (unit = 0; unit < LSI_MAX_DEVS; unit++) {
1094 index = drive_get_index(IF_SCSI, bus, unit);
1095 if (index == -1)
1096 continue;
1097 lsi_scsi_attach(scsi, drives_table[index].bdrv, unit);
1102 /* Add virtio block devices */
1103 if (pci_enabled) {
1104 int index;
1105 int unit_id = 0;
1107 while ((index = drive_get_index(IF_VIRTIO, 0, unit_id)) != -1) {
1108 virtio_blk_init(pci_bus, drives_table[index].bdrv);
1109 unit_id++;
1113 /* Add virtio balloon device */
1114 if (pci_enabled)
1115 virtio_balloon_init(pci_bus);
1118 static void pc_init_pci(ram_addr_t ram_size, int vga_ram_size,
1119 const char *boot_device, DisplayState *ds,
1120 const char *kernel_filename,
1121 const char *kernel_cmdline,
1122 const char *initrd_filename,
1123 const char *cpu_model)
1125 pc_init1(ram_size, vga_ram_size, boot_device, ds,
1126 kernel_filename, kernel_cmdline,
1127 initrd_filename, 1, cpu_model);
1130 static void pc_init_isa(ram_addr_t ram_size, int vga_ram_size,
1131 const char *boot_device, DisplayState *ds,
1132 const char *kernel_filename,
1133 const char *kernel_cmdline,
1134 const char *initrd_filename,
1135 const char *cpu_model)
1137 pc_init1(ram_size, vga_ram_size, boot_device, ds,
1138 kernel_filename, kernel_cmdline,
1139 initrd_filename, 0, cpu_model);
1142 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
1143 BIOS will read it and start S3 resume at POST Entry */
1144 void cmos_set_s3_resume(void)
1146 if (rtc_state)
1147 rtc_set_memory(rtc_state, 0xF, 0xFE);
1150 QEMUMachine pc_machine = {
1151 .name = "pc",
1152 .desc = "Standard PC",
1153 .init = pc_init_pci,
1154 .ram_require = VGA_RAM_SIZE + PC_MAX_BIOS_SIZE,
1155 .max_cpus = 255,
1158 QEMUMachine isapc_machine = {
1159 .name = "isapc",
1160 .desc = "ISA-only PC",
1161 .init = pc_init_isa,
1162 .ram_require = VGA_RAM_SIZE + PC_MAX_BIOS_SIZE,
1163 .max_cpus = 1,