hw/parallel.c

   1 /*
   2  * QEMU Parallel PORT emulation
   3  *
   4  * Copyright (c) 2003-2005 Fabrice Bellard
   5  * Copyright (c) 2007 Marko Kohtala
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25 #include "hw.h"
  26 #include "qemu-char.h"
  27 #include "isa.h"
  28 #include "pc.h"
  29
  30 //#define DEBUG_PARALLEL
  31
  32 #ifdef DEBUG_PARALLEL
  33 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
  34 #else
  35 #define pdebug(fmt, ...) ((void)0)
  36 #endif
  37
  38 #define PARA_REG_DATA 0
  39 #define PARA_REG_STS 1
  40 #define PARA_REG_CTR 2
  41 #define PARA_REG_EPP_ADDR 3
  42 #define PARA_REG_EPP_DATA 4
  43
  44 /*
  45  * These are the definitions for the Printer Status Register
  46  */
  47 #define PARA_STS_BUSY   0x80    /* Busy complement */
  48 #define PARA_STS_ACK    0x40    /* Acknowledge */
  49 #define PARA_STS_PAPER  0x20    /* Out of paper */
  50 #define PARA_STS_ONLINE 0x10    /* Online */
  51 #define PARA_STS_ERROR  0x08    /* Error complement */
  52 #define PARA_STS_TMOUT  0x01    /* EPP timeout */
  53
  54 /*
  55  * These are the definitions for the Printer Control Register
  56  */
  57 #define PARA_CTR_DIR    0x20    /* Direction (1=read, 0=write) */
  58 #define PARA_CTR_INTEN  0x10    /* IRQ Enable */
  59 #define PARA_CTR_SELECT 0x08    /* Select In complement */
  60 #define PARA_CTR_INIT   0x04    /* Initialize Printer complement */
  61 #define PARA_CTR_AUTOLF 0x02    /* Auto linefeed complement */
  62 #define PARA_CTR_STROBE 0x01    /* Strobe complement */
  63
  64 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
  65
  66 struct ParallelState {
  67     uint8_t dataw;
  68     uint8_t datar;
  69     uint8_t status;
  70     uint8_t control;
  71     qemu_irq irq;
  72     int irq_pending;
  73     CharDriverState *chr;
  74     int hw_driver;
  75     int epp_timeout;
  76     uint32_t last_read_offset; /* For debugging */
  77     /* Memory-mapped interface */
  78     int it_shift;
  79 };
  80
  81 static void parallel_update_irq(ParallelState *s)
  82 {
  83     if (s->irq_pending)
  84         qemu_irq_raise(s->irq);
  85     else
  86         qemu_irq_lower(s->irq);
  87 }
  88
  89 static void
  90 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
  91 {
  92     ParallelState *s = opaque;
  93
  94     pdebug("write addr=0x%02x val=0x%02x\n", addr, val);
  95
  96     addr &= 7;
  97     switch(addr) {
  98     case PARA_REG_DATA:
  99         s->dataw = val;
 100         parallel_update_irq(s);
 101         break;
 102     case PARA_REG_CTR:
 103         val |= 0xc0;
 104         if ((val & PARA_CTR_INIT) == 0 ) {
 105             s->status = PARA_STS_BUSY;
 106             s->status |= PARA_STS_ACK;
 107             s->status |= PARA_STS_ONLINE;
 108             s->status |= PARA_STS_ERROR;
 109         }
 110         else if (val & PARA_CTR_SELECT) {
 111             if (val & PARA_CTR_STROBE) {
 112                 s->status &= ~PARA_STS_BUSY;
 113                 if ((s->control & PARA_CTR_STROBE) == 0)
 114                     qemu_chr_write(s->chr, &s->dataw, 1);
 115             } else {
 116                 if (s->control & PARA_CTR_INTEN) {
 117                     s->irq_pending = 1;
 118                 }
 119             }
 120         }
 121         parallel_update_irq(s);
 122         s->control = val;
 123         break;
 124     }
 125 }
 126
 127 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
 128 {
 129     ParallelState *s = opaque;
 130     uint8_t parm = val;
 131     int dir;
 132
 133     /* Sometimes programs do several writes for timing purposes on old
 134        HW. Take care not to waste time on writes that do nothing. */
 135
 136     s->last_read_offset = ~0U;
 137
 138     addr &= 7;
 139     switch(addr) {
 140     case PARA_REG_DATA:
 141         if (s->dataw == val)
 142             return;
 143         pdebug("wd%02x\n", val);
 144         qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
 145         s->dataw = val;
 146         break;
 147     case PARA_REG_STS:
 148         pdebug("ws%02x\n", val);
 149         if (val & PARA_STS_TMOUT)
 150             s->epp_timeout = 0;
 151         break;
 152     case PARA_REG_CTR:
 153         val |= 0xc0;
 154         if (s->control == val)
 155             return;
 156         pdebug("wc%02x\n", val);
 157
 158         if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
 159             if (val & PARA_CTR_DIR) {
 160                 dir = 1;
 161             } else {
 162                 dir = 0;
 163             }
 164             qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
 165             parm &= ~PARA_CTR_DIR;
 166         }
 167
 168         qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
 169         s->control = val;
 170         break;
 171     case PARA_REG_EPP_ADDR:
 172         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 173             /* Controls not correct for EPP address cycle, so do nothing */
 174             pdebug("wa%02x s\n", val);
 175         else {
 176             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 177             if (qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
 178                 s->epp_timeout = 1;
 179                 pdebug("wa%02x t\n", val);
 180             }
 181             else
 182                 pdebug("wa%02x\n", val);
 183         }
 184         break;
 185     case PARA_REG_EPP_DATA:
 186         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 187             /* Controls not correct for EPP data cycle, so do nothing */
 188             pdebug("we%02x s\n", val);
 189         else {
 190             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 191             if (qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
 192                 s->epp_timeout = 1;
 193                 pdebug("we%02x t\n", val);
 194             }
 195             else
 196                 pdebug("we%02x\n", val);
 197         }
 198         break;
 199     }
 200 }
 201
 202 static void
 203 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
 204 {
 205     ParallelState *s = opaque;
 206     uint16_t eppdata = cpu_to_le16(val);
 207     int err;
 208     struct ParallelIOArg ioarg = {
 209         .buffer = &eppdata, .count = sizeof(eppdata)
 210     };
 211     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 212         /* Controls not correct for EPP data cycle, so do nothing */
 213         pdebug("we%04x s\n", val);
 214         return;
 215     }
 216     err = qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 217     if (err) {
 218         s->epp_timeout = 1;
 219         pdebug("we%04x t\n", val);
 220     }
 221     else
 222         pdebug("we%04x\n", val);
 223 }
 224
 225 static void
 226 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
 227 {
 228     ParallelState *s = opaque;
 229     uint32_t eppdata = cpu_to_le32(val);
 230     int err;
 231     struct ParallelIOArg ioarg = {
 232         .buffer = &eppdata, .count = sizeof(eppdata)
 233     };
 234     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 235         /* Controls not correct for EPP data cycle, so do nothing */
 236         pdebug("we%08x s\n", val);
 237         return;
 238     }
 239     err = qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 240     if (err) {
 241         s->epp_timeout = 1;
 242         pdebug("we%08x t\n", val);
 243     }
 244     else
 245         pdebug("we%08x\n", val);
 246 }
 247
 248 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
 249 {
 250     ParallelState *s = opaque;
 251     uint32_t ret = 0xff;
 252
 253     addr &= 7;
 254     switch(addr) {
 255     case PARA_REG_DATA:
 256         if (s->control & PARA_CTR_DIR)
 257             ret = s->datar;
 258         else
 259             ret = s->dataw;
 260         break;
 261     case PARA_REG_STS:
 262         ret = s->status;
 263         s->irq_pending = 0;
 264         if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
 265             /* XXX Fixme: wait 5 microseconds */
 266             if (s->status & PARA_STS_ACK)
 267                 s->status &= ~PARA_STS_ACK;
 268             else {
 269                 /* XXX Fixme: wait 5 microseconds */
 270                 s->status |= PARA_STS_ACK;
 271                 s->status |= PARA_STS_BUSY;
 272             }
 273         }
 274         parallel_update_irq(s);
 275         break;
 276     case PARA_REG_CTR:
 277         ret = s->control;
 278         break;
 279     }
 280     pdebug("read addr=0x%02x val=0x%02x\n", addr, ret);
 281     return ret;
 282 }
 283
 284 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
 285 {
 286     ParallelState *s = opaque;
 287     uint8_t ret = 0xff;
 288     addr &= 7;
 289     switch(addr) {
 290     case PARA_REG_DATA:
 291         qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
 292         if (s->last_read_offset != addr || s->datar != ret)
 293             pdebug("rd%02x\n", ret);
 294         s->datar = ret;
 295         break;
 296     case PARA_REG_STS:
 297         qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
 298         ret &= ~PARA_STS_TMOUT;
 299         if (s->epp_timeout)
 300             ret |= PARA_STS_TMOUT;
 301         if (s->last_read_offset != addr || s->status != ret)
 302             pdebug("rs%02x\n", ret);
 303         s->status = ret;
 304         break;
 305     case PARA_REG_CTR:
 306         /* s->control has some bits fixed to 1. It is zero only when
 307            it has not been yet written to.  */
 308         if (s->control == 0) {
 309             qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
 310             if (s->last_read_offset != addr)
 311                 pdebug("rc%02x\n", ret);
 312             s->control = ret;
 313         }
 314         else {
 315             ret = s->control;
 316             if (s->last_read_offset != addr)
 317                 pdebug("rc%02x\n", ret);
 318         }
 319         break;
 320     case PARA_REG_EPP_ADDR:
 321         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
 322             /* Controls not correct for EPP addr cycle, so do nothing */
 323             pdebug("ra%02x s\n", ret);
 324         else {
 325             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 326             if (qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
 327                 s->epp_timeout = 1;
 328                 pdebug("ra%02x t\n", ret);
 329             }
 330             else
 331                 pdebug("ra%02x\n", ret);
 332         }
 333         break;
 334     case PARA_REG_EPP_DATA:
 335         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
 336             /* Controls not correct for EPP data cycle, so do nothing */
 337             pdebug("re%02x s\n", ret);
 338         else {
 339             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 340             if (qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
 341                 s->epp_timeout = 1;
 342                 pdebug("re%02x t\n", ret);
 343             }
 344             else
 345                 pdebug("re%02x\n", ret);
 346         }
 347         break;
 348     }
 349     s->last_read_offset = addr;
 350     return ret;
 351 }
 352
 353 static uint32_t
 354 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
 355 {
 356     ParallelState *s = opaque;
 357     uint32_t ret;
 358     uint16_t eppdata = ~0;
 359     int err;
 360     struct ParallelIOArg ioarg = {
 361         .buffer = &eppdata, .count = sizeof(eppdata)
 362     };
 363     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 364         /* Controls not correct for EPP data cycle, so do nothing */
 365         pdebug("re%04x s\n", eppdata);
 366         return eppdata;
 367     }
 368     err = qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 369     ret = le16_to_cpu(eppdata);
 370
 371     if (err) {
 372         s->epp_timeout = 1;
 373         pdebug("re%04x t\n", ret);
 374     }
 375     else
 376         pdebug("re%04x\n", ret);
 377     return ret;
 378 }
 379
 380 static uint32_t
 381 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
 382 {
 383     ParallelState *s = opaque;
 384     uint32_t ret;
 385     uint32_t eppdata = ~0U;
 386     int err;
 387     struct ParallelIOArg ioarg = {
 388         .buffer = &eppdata, .count = sizeof(eppdata)
 389     };
 390     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 391         /* Controls not correct for EPP data cycle, so do nothing */
 392         pdebug("re%08x s\n", eppdata);
 393         return eppdata;
 394     }
 395     err = qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 396     ret = le32_to_cpu(eppdata);
 397
 398     if (err) {
 399         s->epp_timeout = 1;
 400         pdebug("re%08x t\n", ret);
 401     }
 402     else
 403         pdebug("re%08x\n", ret);
 404     return ret;
 405 }
 406
 407 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
 408 {
 409     addr &= 7;
 410     pdebug("wecp%d=%02x\n", addr, val);
 411 }
 412
 413 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
 414 {
 415     uint8_t ret = 0xff;
 416     addr &= 7;
 417     pdebug("recp%d:%02x\n", addr, ret);
 418     return ret;
 419 }
 420
 421 static void parallel_reset(void *opaque)
 422 {
 423     ParallelState *s = opaque;
 424
 425     s->datar = ~0;
 426     s->dataw = ~0;
 427     s->status = PARA_STS_BUSY;
 428     s->status |= PARA_STS_ACK;
 429     s->status |= PARA_STS_ONLINE;
 430     s->status |= PARA_STS_ERROR;
 431     s->status |= PARA_STS_TMOUT;
 432     s->control = PARA_CTR_SELECT;
 433     s->control |= PARA_CTR_INIT;
 434     s->control |= 0xc0;
 435     s->irq_pending = 0;
 436     s->hw_driver = 0;
 437     s->epp_timeout = 0;
 438     s->last_read_offset = ~0U;
 439 }
 440
 441 /* If fd is zero, it means that the parallel device uses the console */
 442 ParallelState *parallel_init(int base, qemu_irq irq, CharDriverState *chr)
 443 {
 444     ParallelState *s;
 445     uint8_t dummy;
 446
 447     s = qemu_mallocz(sizeof(ParallelState));
 448     s->irq = irq;
 449     s->chr = chr;
 450     parallel_reset(s);
 451     qemu_register_reset(parallel_reset, s);
 452
 453     if (qemu_chr_ioctl(chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
 454         s->hw_driver = 1;
 455         s->status = dummy;
 456     }
 457
 458     if (s->hw_driver) {
 459         register_ioport_write(base, 8, 1, parallel_ioport_write_hw, s);
 460         register_ioport_read(base, 8, 1, parallel_ioport_read_hw, s);
 461         register_ioport_write(base+4, 1, 2, parallel_ioport_eppdata_write_hw2, s);
 462         register_ioport_read(base+4, 1, 2, parallel_ioport_eppdata_read_hw2, s);
 463         register_ioport_write(base+4, 1, 4, parallel_ioport_eppdata_write_hw4, s);
 464         register_ioport_read(base+4, 1, 4, parallel_ioport_eppdata_read_hw4, s);
 465         register_ioport_write(base+0x400, 8, 1, parallel_ioport_ecp_write, s);
 466         register_ioport_read(base+0x400, 8, 1, parallel_ioport_ecp_read, s);
 467     }
 468     else {
 469         register_ioport_write(base, 8, 1, parallel_ioport_write_sw, s);
 470         register_ioport_read(base, 8, 1, parallel_ioport_read_sw, s);
 471     }
 472     return s;
 473 }
 474
 475 /* Memory mapped interface */
 476 static uint32_t parallel_mm_readb (void *opaque, target_phys_addr_t addr)
 477 {
 478     ParallelState *s = opaque;
 479
 480     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFF;
 481 }
 482
 483 static void parallel_mm_writeb (void *opaque,
 484                                 target_phys_addr_t addr, uint32_t value)
 485 {
 486     ParallelState *s = opaque;
 487
 488     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFF);
 489 }
 490
 491 static uint32_t parallel_mm_readw (void *opaque, target_phys_addr_t addr)
 492 {
 493     ParallelState *s = opaque;
 494
 495     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFFFF;
 496 }
 497
 498 static void parallel_mm_writew (void *opaque,
 499                                 target_phys_addr_t addr, uint32_t value)
 500 {
 501     ParallelState *s = opaque;
 502
 503     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFFFF);
 504 }
 505
 506 static uint32_t parallel_mm_readl (void *opaque, target_phys_addr_t addr)
 507 {
 508     ParallelState *s = opaque;
 509
 510     return parallel_ioport_read_sw(s, addr >> s->it_shift);
 511 }
 512
 513 static void parallel_mm_writel (void *opaque,
 514                                 target_phys_addr_t addr, uint32_t value)
 515 {
 516     ParallelState *s = opaque;
 517
 518     parallel_ioport_write_sw(s, addr >> s->it_shift, value);
 519 }
 520
 521 static CPUReadMemoryFunc *parallel_mm_read_sw[] = {
 522     &parallel_mm_readb,
 523     &parallel_mm_readw,
 524     &parallel_mm_readl,
 525 };
 526
 527 static CPUWriteMemoryFunc *parallel_mm_write_sw[] = {
 528     &parallel_mm_writeb,
 529     &parallel_mm_writew,
 530     &parallel_mm_writel,
 531 };
 532
 533 /* If fd is zero, it means that the parallel device uses the console */
 534 ParallelState *parallel_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq, CharDriverState *chr)
 535 {
 536     ParallelState *s;
 537     int io_sw;
 538
 539     s = qemu_mallocz(sizeof(ParallelState));
 540     s->irq = irq;
 541     s->chr = chr;
 542     s->it_shift = it_shift;
 543     parallel_reset(s);
 544     qemu_register_reset(parallel_reset, s);
 545
 546     io_sw = cpu_register_io_memory(0, parallel_mm_read_sw, parallel_mm_write_sw, s);
 547     cpu_register_physical_memory(base, 8 << it_shift, io_sw);
 548     return s;
 549 }