Spencer Oliver [Tue, 5 Oct 2010 15:29:37 +0000 (5 16:29 +0100)]
build: remove warn_unused_result errors
Remove any build errors for strtol when building release
version of openocd.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 5 Oct 2010 14:00:40 +0000 (5 15:00 +0100)]
gdbderver: fix gdb pipe startup overflow
When usng gdb pipes we need to keep openocd output at a minimum,
otherwise the gdb stdin will overflow and fail.
Make the calls to gdb_port and log_output synchronous to stop this.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Mon, 4 Oct 2010 19:35:33 +0000 (4 20:35 +0100)]
gdbserver: fix gdb_port memory leak
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Mon, 4 Oct 2010 19:34:47 +0000 (4 20:34 +0100)]
server: fix server pipe windows support
commit
50d5441e2a615fb2c44b41a777e4373901f7a2e6 caused
native windows build to fail.
Firstly this patch fixes the build issue, but it also disables support
for named pipes under Windows. Windows does not support posix named
pipes.
A cross-platfom access layer will need creating before support can be
enabled again.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Øyvind Harboe [Sun, 5 Sep 2010 19:20:15 +0000 (5 21:20 +0200)]
zy1000: add : port number syntax for tftp filing system
Allows using non-standard port number. Default to port 69.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 27 Sep 2010 20:55:30 +0000 (27 22:55 +0200)]
pipes: add documentation for pipes
Stick with the name "gdb_port" even if this command
can be used for other things(disable, named pipes,
anonymous stdin/out pipe). "port" is correct for
probably more than 90% of use cases, if not more.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 27 Sep 2010 06:50:49 +0000 (27 08:50 +0200)]
server: add support for pipes
-p/--pipe is now deprecated. Use '-c "gdb_port pipe;log_output openocd.log"'
instead. Warning logged.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 27 Sep 2010 06:48:31 +0000 (27 08:48 +0200)]
server: specify port as a string
This will allow switching to using named pipes.
Split this out as a seperate commit to make changes
easier to follow.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 27 Sep 2010 07:24:51 +0000 (27 09:24 +0200)]
server: read/write now goes through connection fn's
depending on whether the connection is over a socket
or pipe, the read is done differently.
pipes can return -1 when writing 0 bytes, make 0 byte
writes a successful no-op. 0 byte writes falls out
naturally of tcl server code.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 27 Sep 2010 06:26:31 +0000 (27 08:26 +0200)]
server: split file descriptors in in/out fd's
pipes have different fd's for in/out. This makes the
code more orthogonal and prepares for adding pipes.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sun, 26 Sep 2010 17:30:31 +0000 (26 19:30 +0200)]
server: rely on ctrl-c to stop openocd
there was special support to support pressing 'x' to quit
openocd. ctrl-c is sufficient. The main server loop is already
complicated enough.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sun, 26 Sep 2010 16:24:36 +0000 (26 18:24 +0200)]
log: remove hack to redirect logs when pipes are in use
There is an explicit command "log_output" that can
be used to redirect log output to a file, no need
for a hack in the first place.
Before enabling pipes, use "log_output foo" to redirect
log output to the "foo" files.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Luca Bruno [Mon, 27 Sep 2010 14:21:04 +0000 (27 16:21 +0200)]
Update ep93xx and at91rm9200 drivers
ep93xx and at91rm9200 are conditionally built only on arm and were not
updated to reflect changes in command registration handler.
This patch makes them properly compile again, fixing a build failure
experienced on Debian armel.
Signed-off-by: Luca Bruno <lucab@debian.org>
Signed-off-by: Zachary T Welch <zwelch@codesourcery.com>
Øyvind Harboe [Wed, 29 Sep 2010 07:11:01 +0000 (29 09:11 +0200)]
fileio: fileio_size() can now fail
Part of making the fileio API more robust.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 28 Sep 2010 13:37:56 +0000 (28 15:37 +0200)]
fileio: refactor struct fileio to be an opaque structure
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Antonio Borneo [Tue, 28 Sep 2010 08:37:19 +0000 (28 16:37 +0800)]
TCL scripts: fix ocd_mem2array/mem2array
In previous patch, I have introduced again the symbol
"ocd_mem2array", now replaced by "mem2array".
Fix the error.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Øyvind Harboe [Mon, 27 Sep 2010 14:45:25 +0000 (27 16:45 +0200)]
flash: fix error handling
memory leaks and missing check on memory allocation.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 27 Sep 2010 14:29:08 +0000 (27 16:29 +0200)]
image: fix spelling mistake
struct imageection => struct imagesection
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Zachary T Welch [Fri, 24 Sep 2010 23:13:04 +0000 (24 16:13 -0700)]
Fix omap3_dbginit to write to physical memory.
Setting the OMAP3530 DBGEN bit must be done in physical memory, so
update omap3_dbginit callback to use the new 'mww phys' command syntax.
Øyvind Harboe [Sun, 26 Sep 2010 18:37:53 +0000 (26 20:37 +0200)]
zy1000: fix non-JTAG master build
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sun, 26 Sep 2010 16:01:54 +0000 (26 18:01 +0200)]
gdb: fix blank line at top
snuck in at some point...
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 21 Sep 2010 20:13:09 +0000 (21 22:13 +0200)]
jtagdp: remove #if 0'd kludges and explain why the code is correct
short story: if the JTAG clock is too high, then the
behavior will be flaky and kludging the code may
seem to make things beter, but really it's just a red
herring.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 20 Sep 2010 07:22:46 +0000 (20 09:22 +0200)]
flash: fix error handling
sensible error must be reported at failure site
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 20 Sep 2010 07:40:09 +0000 (20 09:40 +0200)]
embeddedice: fix error handling
error is now reported at failure site.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Antonio Borneo [Tue, 21 Sep 2010 08:06:37 +0000 (21 16:06 +0800)]
TCL scripts: collect duplicated procedures
TCL procedures mrw and mmw, originally in DaVinci target code,
are duplicated in other TCL scripts.
Moved in a common helper file, and added help/usage description.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Øyvind Harboe [Fri, 10 Sep 2010 09:42:12 +0000 (10 11:42 +0200)]
startup: removed capture_catch
not used.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 20 Sep 2010 09:50:32 +0000 (20 11:50 +0200)]
helper: fix flaky capture command
capture of progress output would get polling
results. This will break in the example below
where polling output would override the tcl
return value.
capture {sleep 10000; set abc def}
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 8 Sep 2010 18:04:27 +0000 (8 20:04 +0200)]
tcl_server: switch to ctrl-z
by using ctrl-z instead of line end, multi-line tcl scripts
can be handled.
Testing: send ctrl-z a couple of times to make telnet enter the
mode where it sends ctrl-z unencoded.
Programs that talk to the tcl_server can send ctrl-z to
indicate end of tcl-let to be executed without having
to worry about telnet protocols.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 17 Sep 2010 23:37:42 +0000 (18 01:37 +0200)]
logging: turn of stdout/stderr buffering
with this buffering disabled fancier logging scripts will
be able to process each line as it is output.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 7 Sep 2010 18:27:45 +0000 (7 20:27 +0200)]
zy1000: add support for Linux host
used /dev/mem and mmem() to memory map JTAG registers
into user space and used new configure options to exclude
eCos specific code.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 20 Sep 2010 11:44:03 +0000 (20 13:44 +0200)]
jtag: build jtag first because it generates header files
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 3 Sep 2010 20:49:37 +0000 (3 22:49 +0200)]
warnings: fix alignment warnings
These warnings are for architectures that do not
support non-aligned word access.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 7 Sep 2010 18:19:05 +0000 (7 20:19 +0200)]
zy1000: split out configure option for eCos and JTAG master
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 7 Sep 2010 18:22:38 +0000 (7 20:22 +0200)]
zy1000: remove obsolete debug code
Obsolete code clutter
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 20 Sep 2010 07:23:24 +0000 (20 09:23 +0200)]
tcl: remove incomplete unused tcl file
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Mike Dunn [Sun, 19 Sep 2010 22:30:59 +0000 (19 15:30 -0700)]
xscale: some wp detail added to user manual
Hi everyone (again),
Watchpoints on xscale are quirky, so I thought a little explanation in the
user's manual was warranted.
Comments gratefully received.
Last one, Øyvind :-)
Thanks,
Mike
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Mike Dunn [Sun, 19 Sep 2010 21:48:51 +0000 (19 14:48 -0700)]
xscale: check that wp length does not exceed address
Hi everyone,
A while back I sent in a patch that adds support for watchpoint lengths greater
than four on xscale. It's been working well, until the other day, when it
caused an unexpected debug exception. Looking into this I realized there is a
case where it breaks: when the length arg is greater than the base address.
This is a consequence of the way the hardware works. Don't see a work-around,
so I added code to xscale_add_watchpoint() to check for and disallow this
combination.
Some more detail... xscale watchpoint hardware does not support a length
directly. Instead, a mask value can be specified (not to be confused with the
optional mask arg to the wp command, which xscale does not support). Any bits
set in the mask are ignored when the watchpoint hardware compares the access
address to the watchpoint address. So as long as the length is a power of two,
setting the mask to length-1 effectively specifies the length. Or so I thought,
until I realized that if the length exceeds the base address, *all* bits of the
base address are ignored by the comaparator, and the watchpoint range
effectively becomes 0 .. length.
Questions, comments, criticisms gratefully received.
Thanks,
Mike
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Mike Dunn [Sun, 19 Sep 2010 21:35:46 +0000 (19 14:35 -0700)]
xscale: bp/wp: additional LOG_ERROR on failure
Hi everyone,
Added more LOG_ERROR messsages to watchpoint and breakpoint code, given that the
infrastructure no longer interprets returned error codes. Also changed
existing LOG_INFO and LOG_WARNING to LOG_ERROR for cases where an error is
returned.
Note that the check of the target state is superflous, since the infrastruture
code currently checks this before calling target code. Is this being
reconsidered as well? Also, should we stop returning anything other than
ERROR_OK and ERROR_FAIL?
Comments gratefully received.
Thanks,
Mike
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Karl Kurbjun [Sat, 18 Sep 2010 15:55:29 +0000 (18 09:55 -0600)]
AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.
Flemming Futtrup [Wed, 15 Sep 2010 09:34:57 +0000 (15 11:34 +0200)]
cfi: add sst39vf6401b
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 13 Sep 2010 19:59:39 +0000 (13 21:59 +0200)]
breakpoints: fix error handling
do not try to interpret "retval" into a string, just
amend a bit about the context of the already reported
error.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Takács Áron [Tue, 14 Sep 2010 09:15:35 +0000 (14 11:15 +0200)]
board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013
the new Marvell PXA270M processor has a new TAPID: 0x89265013.
Attached you will find a patch for target/pxa270.cfg that will handle this.
I have also attached a board/colibri.cfg file to support the Colibri
PXA270 module by Toradex.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Mike Dunn [Mon, 13 Sep 2010 19:45:37 +0000 (13 12:45 -0700)]
xscale: fix sw breakpoints for thumb; set bp immediately
Hi everyone,
Version 2 of this patch. Code added to breakpoints.c was removed from previous
patch, and item 3 added, per discussion with Øyvind regarding error reporting.
Item 4 added, which I just noticed.
I tried to use a software breakpoint in thumb code on the xscale for the first
time recently, and was surprised to find that it didn't work. The result was
this patch, which does four things:
1): fix trivial cut-n-paste error that caused thumb breakpoints to not work
2): call xscale_set_breakpoint() from xscale_add_breakpoint()
3): log error on data abort in xscale_write_memory()
4): fixed incorrect error code returned by xscale_set_breakpoint() when no
breakpoint register is available; added comment
Item 2 not only makes the xscale breakpoint code consistent with other targets,
but also alerts the user immediately if an error occurs when writing the
breakpoint instruction to target memory (previously, xscale_set_breakpoint() was
not called until execution resumed). Also, calling xscale_breakpoint_set() as
part of the call chain starting with handle_bp_command() and propagating the
return status back up the chain avoids the situation where OpenOCD "thinks" the
breakpoint is set when in reality an error ocurred.
Item 3 provides a helpful message for a common reason for failure to set sw
breakpoint.
This was thoroughly tested, mindful of the fact that breakpoint management is
somewhat dicey during single-stepping.
Comments and criticisms of course gratefully received.
Mike
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Mike Dunn [Sun, 12 Sep 2010 19:05:07 +0000 (12 12:05 -0700)]
propagate return status of set_breakpoint() up call chain
Hi everyone,
I figured since I was poking around in the breakpoint code on other arches, I'd
add this change to those arches that don't do it already. This patch propagates
the return code of <arch>_set_breakpoint() up the call stack. This ensures that
the higher layer breakpoint infrastructure is aware that an error ocurred, in
which case the breakpoint is not recorded.
Normally I wouldn't touch code that I can't test, but the code is very
uniform across architectures, and the change is rather benign, so I figured
after careful inspection that it is safe. If the maintainers or others think
this is imprudent, the patch can be dropped.
Also changed the error code to something more appropriate in two cases where
hardware resources are unavailable.
Comments and criticisms of course gratefully received.
Mike
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sun, 12 Sep 2010 17:29:37 +0000 (12 19:29 +0200)]
helper: add stacktrace command that returns error stacktrace
Ability to access the stacktrace from a script is quite
handy.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sun, 12 Sep 2010 18:16:55 +0000 (12 20:16 +0200)]
jim: fix crash when using Jim_ListInsertElements
Jim_ListInsertElements was simply forgotten from the
fn that registered all the APIs.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 10 Sep 2010 11:16:13 +0000 (10 13:16 +0200)]
version command: make it scriptable
you can now set a variable in a script like set version [version].
Also version takes an optional argument "git" to show git version
of source. If git is not installed during the build, then this
will yield an error that is ignored during the build and "version git"
returns an empty string.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 10 Sep 2010 17:28:11 +0000 (10 19:28 +0200)]
command: capture command now handles both types commands
Commands that output progress output and no return value
will have the progress output captured.
Commands that do not output progress output(tcl commands)
will return the tcl return value instead.
The advantage here is that it is no longer necessary to
consider which command one is capturing, it works for
either.
Example #1: capture progress output:
set foo [capture help]
Example #2: capture tcl return value
set foo [capture {set abc def}]
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 10 Sep 2010 08:22:14 +0000 (10 10:22 +0200)]
cfi: random crash in cfi_probe() fixed
for non_cfi cfi chips free() was invoked on rodata.
The mystery is why this bug has survived for so long.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 10 Sep 2010 08:20:06 +0000 (10 10:20 +0200)]
cfi: tighten up type usage a bit
sizeof() is a bit less scary than seing assumption
about size of type, no bug as such.
Use NULL instead of 0 for pointers. More obvious that
it is a pointer from code inspection.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Mike Dunn [Thu, 9 Sep 2010 02:13:14 +0000 (8 19:13 -0700)]
xscale: mark xscale registers invalid on debug entry
Hi everyone,
This simple patch fixes a problem I noticed on the xscale where incorrect values
are sometimes reported by the reg command. The problem can occur when
requesting the value of registers in the xscale-specific register cache. With a
couple of exceptions, none of the registers in the xscale register cache are
automatically retrieved on debug entry. This is probably fine, as they are
unlikely to be needed on a regular basis during a typical debug session, and
they can be retrieved when explicitly requested by name using the reg command.
The problem is that once this is done, the register remains marked as valid for
the remainder of the OpenOCD session, and the reg command will henceforth always
report the same value because it is obtained from the cache and is never again
retrieved from the debug handler on the target.
The fix is to mark all registers in the xscale register cache as invalid on
debug entry (before the two exceptions are retrieved), thus forcing retrieval
(when requested) from the target across resumptions in execution, and avoiding
the reporting of stale values.
Small addition change by Øyvind: change 'i' to unsigned to fix compiler
warning for xscale_debug_entry() fn.
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Alexander Stein [Wed, 8 Sep 2010 08:17:54 +0000 (8 10:17 +0200)]
Remove duplicated initialization
I a mail conversation with Øyvind we stated that speed may not be set at
all on case CLOCK_MODE_KHZ and CLOCK_MODE_RCLK. Also there isn't proper
error propagation adapter_khz_to_speed or jtag_rclk_to_speed.
So jtag_get_speed may need some rewrite for error propagation.
CC: Øyvind Harboe <oyvind.harboe@zylin.com>
Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 7 Sep 2010 16:38:06 +0000 (7 18:38 +0200)]
warning: fix silly -O3 warning
Some versions of GCC don't pick up that local variables
are set in all code paths.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 1 Sep 2010 21:36:31 +0000 (1 23:36 +0200)]
jtag: fix regression with dummy driver and when starting OpenOCD with target powered down
Do not fail startup if communication with target is
not possible.
OpenOCD supports launching without a target connected
or the target powered down.
The user will typically power up the target and issue
a "reset init" + load his application after OpenOCD
is started then.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Wookey [Tue, 31 Aug 2010 12:53:50 +0000 (31 13:53 +0100)]
Numonyx M29W160ET patch
Someone called David Carne popped up on IRC and offered a fix (as he's not
on this list so can;t post here). I am just passing it on. (thanx David)
10:54 < davidc__> Basically; the Numonyx M29W160ET has an incorrect CFI PRI
block; it describes the erase blocks backwards
10:54 < davidc__> the linked patch has a fixup for that part [really trivial]:
Spencer Oliver [Wed, 25 Aug 2010 19:29:22 +0000 (25 20:29 +0100)]
cortex m3: add cortex_m3 reset_config cmd
This new cmd adds the ability to choose the Cortex-M3
reset method used.
It defaults to using SRST for reset if available otherwise
it falls back to using NVIC VECTRESET. This is known to work
on all cores.
Move any luminary specific reset handling to the stellaris cfg file.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 24 Aug 2010 19:52:04 +0000 (24 20:52 +0100)]
flash: increase stellaris flash loader buffer
This speeds up programming for targets with more working area,
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 24 Aug 2010 19:50:20 +0000 (24 20:50 +0100)]
cfg: update Luminary config files
- Update all Luminary config's to use a common target/stellaris.cfg.
- Add Luminary ek-lm3s6965 config.
- Increase working area for boards with more ram.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
David Brownell [Fri, 27 Aug 2010 22:16:39 +0000 (27 15:16 -0700)]
bitq: unshadow pause()
bitq.c: In function ‘bitq_scan_field’:
bitq.c:224: error: declaration of ‘pause’ shadows a global declaration
/usr/include/unistd.h:429: error: shadowed declaration is here
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Thu, 19 Aug 2010 14:06:45 +0000 (19 16:06 +0200)]
imx35pdk: fix clock and reset delays
Use rclk and 100ms delay on ntrst
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 17 Aug 2010 19:51:36 +0000 (17 21:51 +0200)]
mcb1700: Keil MCB1700 w/1768 config script
Ca. 93kBytes/s flashing speed @ 10MHz JTAG clock
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Mon, 16 Aug 2010 12:25:37 +0000 (16 08:25 -0400)]
update more Stellaris EK board comments
Using the bundled JTAG/SWD debug support in JTAG mode
is optional on *all* of the EK boards.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Mon, 16 Aug 2010 05:11:39 +0000 (16 01:11 -0400)]
two NEWS updates
Mention AVR32 AP7000 support.
Clarify ARM semihosting update was for V7M (not ARM9 etc).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Mon, 16 Aug 2010 04:36:52 +0000 (16 00:36 -0400)]
Update comments for some Stellaris EK boards.
These don't need to use the on-board debuggers in JTAG mode.
Off-board is OK, as would be SWD mode.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Oleksandr Tymoshenko [Sun, 15 Aug 2010 19:55:17 +0000 (15 21:55 +0200)]
avr32: basic target script
David Brownell [Sun, 15 Aug 2010 19:54:01 +0000 (15 21:54 +0200)]
at32ap7000 config file
nice board to play with.
Oleksandr Tymoshenko [Sun, 15 Aug 2010 19:51:34 +0000 (15 21:51 +0200)]
avr32: work-in-progress
committed so as to ease cooperation and to let it be improved
over time.
So far it supports:
- halt/resume
- registers inspection
- memory inspection/modification
I'm still getting up to speed with OpenOCD internals and AVR32 so code is a little
bit messy and I'd appreciate any feedback.
Catalin Patulea [Fri, 13 Aug 2010 22:41:18 +0000 (13 18:41 -0400)]
Fix typo in usb_blaster_vid_pid error message
Catalin Patulea [Fri, 13 Aug 2010 20:57:37 +0000 (13 16:57 -0400)]
Fix typo in documentation of usb_blaster_vid_pid command
Øyvind Harboe [Fri, 13 Aug 2010 10:59:36 +0000 (13 12:59 +0200)]
lpc1768: turn down the jtag clock
Tests should that it needs to be as low as 100kHz to be
stable.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Piotr Esden-Tempski [Wed, 4 Aug 2010 05:04:46 +0000 (3 22:04 -0700)]
Added support for the Lisa/L jtag LEDs.
Piotr Esden-Tempski [Wed, 4 Aug 2010 04:00:09 +0000 (3 21:00 -0700)]
Added Lisa/L script as a target board.
Piotr Esden-Tempski [Wed, 4 Aug 2010 03:58:29 +0000 (3 20:58 -0700)]
Added support for Lisa/L builtin JTAG interface.
Øyvind Harboe [Thu, 12 Aug 2010 13:01:23 +0000 (12 15:01 +0200)]
at91cap7a-stk-sdram.cfg: faster reset
crank up JTAG speed as soon as clocks are set up.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Thomas Koeller [Tue, 10 Aug 2010 12:56:45 +0000 (10 14:56 +0200)]
jtag: fix handling of 'tap enable' error
if a tap could not be _enabled_, the error message was
'failed to disable tap'. Fixed that. Also, display the failing
tap's name.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Thomas Koeller [Tue, 10 Aug 2010 12:56:44 +0000 (10 14:56 +0200)]
DM36x: Set OSCDIV divider
The ability to set up the OSCDIV divider was missing.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Thomas Koeller [Tue, 10 Aug 2010 12:56:43 +0000 (10 14:56 +0200)]
DM36x: Disable unused SYSCLKs
Clear the enable bits for all clocks that are not set explicitly.
This is done to increase robustness by removing pre-existing
state.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Thomas Koeller [Tue, 10 Aug 2010 12:56:42 +0000 (10 14:56 +0200)]
DM36x: Use enable bit for PLL pre-divider
The PLL pre- and postdividers seem to have enable bits, although
these are not mentioned in the chip documentation.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Fredrik Hederstierna [Thu, 12 Aug 2010 06:53:29 +0000 (12 08:53 +0200)]
str9x: faster flash erase of entire chip
The patch improves flash erase for STR9x in case of a full bank erase.
Then the chip erase command is used instead which improves speed significantly.
Also I think it might help if e.g. STR912 enters some state where flash banks are locked, and a chip erase command is the key for unlocking the flash.
Øyvind Harboe [Wed, 11 Aug 2010 15:24:55 +0000 (11 17:24 +0200)]
tcl: remove silly ocd_ prefix to array2mem and mem2array
ocd_ prefix is used internally in OpenOCD as a kludge more
or less to deal with the two kinds of commands that OpenOCD
has.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 11 Aug 2010 15:09:44 +0000 (11 17:09 +0200)]
board: added at91cap7a stk w/sdram config scripts
The strange thing here with this board is that 16MHz kinda
works, but only 2MHz is really stable.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 11 Aug 2010 09:00:02 +0000 (11 11:00 +0200)]
debug: use assert's when approperiate
error was returned instead of using assert.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 11 Aug 2010 08:58:49 +0000 (11 10:58 +0200)]
arm: add missing error reporting
when an unknown core mode is read from the target,
report error. Can be communication failure.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 11 Aug 2010 08:53:54 +0000 (11 10:53 +0200)]
config scripts: remove useless reference to OpenOCD docs
clutters config scripts.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Ben Gardiner [Mon, 9 Aug 2010 18:41:56 +0000 (9 14:41 -0400)]
cfg: add omapl138 support and da850evm preliminary support
This patch adds support for the omapl138 target and preliminary support for the da850evm. The
target cfg file is based on the icepick routing done by the target/ti_dm6446.cfg file.
I have performed limited testing with this setup. I am posting this patch in the interest of
sharing cfg files and in the hopes that the experts on this list can correct errors I have made or
point out enhancements.
The testing I have performed is debugging uboot with gdb where I also use the following local.cfg
and gdbinit files. Debugging appears to work in so much as 'ni' works.
local.cfg:
gdb_memory_map disable
gdbinit:
target remote localhost:3333
set remote hardware-breakpoint-limit 2
set remote hardware-watchpoint-limit 2
monitor poll on
Comments welcome.
Best Regards,
Ben Gardiner
Øyvind Harboe [Sun, 8 Aug 2010 17:21:04 +0000 (8 19:21 +0200)]
arm7/9: fix "reset run + halt"
if polling is off, then "reset run + halt" would fail
since halt incorrectly assumed the target was in the
reset state as it is the internal poll implementation
that moves the sw tracking of the target state out
of the reset state.
To reproduce:
> reset run; halt
JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
BUG: arm7/9 does not support halt during reset. This is handled in arm7_9_assert_reset()
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sun, 8 Aug 2010 07:14:54 +0000 (8 09:14 +0200)]
target: if polling fails, back off
back-off algorithm for polling. Double polling
interval up to 5000ms when it fails.
when polling succeeds, reset backoff.
This avoids flooding logs(as much) when working
with conditions where the target polling will fail.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Wed, 4 Aug 2010 01:29:05 +0000 (3 21:29 -0400)]
Luminary-icdi comment update
Clarify that ICDI is the generic logic, but this config is
for the JTAG-only (no-SWD) mode.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Mike Dunn [Mon, 2 Aug 2010 19:50:29 +0000 (2 12:50 -0700)]
xscale documentation: vector table handling
Hi everyone. I noticed some incorrect information in the user manual
regarding how the vector table is handled on the xscale, so for your
consideration, here's a short patch that corrects it, and adds a
little more detail I thought might be helpful.
The documentation states that OpenOCD does not attempt to synchronize
the vector tables in memory with those stored in the "mini instruction
cache". In fact, on each resume it does copy from memory to the cache
all entries in the high and low tables that were not previously
defined using the 'xscale vector_table' command. (In
src/target/xscale.c, see xscale_update_vectors(), which is invoked by
xscale_resume().) I take advantage of this during Linux boot-up. The
extra detail describes in general terms how I do this.
Corrections, comments are of course gratefully received.
Thanks,
Mike
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Øyvind Harboe [Mon, 2 Aug 2010 14:55:46 +0000 (2 16:55 +0200)]
verify_image: print out a statement that there are no further errors
It is useful to know that the printed errors are *all* the
errors there were.
Added missing error handling(found by inspection).
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 2 Aug 2010 20:12:33 +0000 (2 22:12 +0200)]
zy1000: use correct base clock when calculating speed divisor
revc uses 60MHz and revb 64MHz, use this in calculations.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 2 Aug 2010 15:09:57 +0000 (2 17:09 +0200)]
zy1000: print out khz correctly in response to setting JTAG speed
Calculate printout based on same core routines.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 2 Aug 2010 11:21:21 +0000 (2 13:21 +0200)]
lpc1768: even if rclk "works", it isn't necessarily the correct clk
rclk = 4MHz oon lpc1768, the correct JTAG clk is 666MHz(4MHz/6).
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 2 Aug 2010 09:59:46 +0000 (2 11:59 +0200)]
ioutil: fix internal fn names
prefix w/ioutil_
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 2 Aug 2010 09:15:21 +0000 (2 11:15 +0200)]
jtag: measure_clk debug proc
It can be useful to get an approximate measurement of
rtck frequency for debugging purposes.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sat, 31 Jul 2010 19:45:56 +0000 (31 21:45 +0200)]
jtag: add jtag_flush_queue_sleep debug command
it can be useful to throttle performance: test
differences in behavior, test performance effect
of long roundtrips.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sun, 1 Aug 2010 07:35:58 +0000 (1 09:35 +0200)]
util: ms command to calculate length of operations
This can be used to calculate approximate RTCK frequency
for instance.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Peter Stuge [Sun, 1 Aug 2010 01:26:48 +0000 (1 03:26 +0200)]
Support NGX Technologies product NGX ARM USB JTAG
This is a standard FT2232 device. More info at their web page:
http://shop.ngxtechnologies.com/product_info.php?cPath=26&products_id=30
Peter Stuge [Sun, 1 Aug 2010 01:26:47 +0000 (1 03:26 +0200)]
Remove srst_pulls_trst from LPC2148 target
srst_pulls_trst is only true on some (broken) LPC2148 boards, a fact
which is already documented in doc/openocd.texi, so it shouldn't be
set unconditionally in the target tcl.
This patch was needed to reflash when an Abort exception occured very
early after reset, before OpenOCD tried to halt the CPU.
David Brownell [Sun, 1 Aug 2010 06:27:14 +0000 (1 02:27 -0400)]
stellaris flash comment update
This flash driver works on more than just two chips.
(Though it does need work still, e.g. to protect more than 64K.
(On non-'3748-A0 chips where errata allow that.))
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>