From: mike brown Date: Mon, 18 Mar 2013 17:19:14 +0000 (+0000) Subject: arm_adi_v5: fix mem_ap_read_buf_u32() JTAG nastiness.. X-Git-Tag: v0.7.0-rc1~31 X-Git-Url: https://repo.or.cz/w/openocd.git/commitdiff_plain/2a8a89edcba49051315f59cea05834b5b704ee61 arm_adi_v5: fix mem_ap_read_buf_u32() JTAG nastiness.. Moved JTAG code out of transport-neutral file (arm_adi_v5.c) into transport specific file (adi_v5_jtag.c). Added ap_block_read to dap_ops interface (arm_adi_v5.h) to support the move. Change-Id: I796d3984f138aad052b97c77ac9c12ffd1158f74 Signed-off-by: mike brown Reviewed-on: http://openocd.zylin.com/1277 Tested-by: jenkins Reviewed-by: Michel JAOUEN Reviewed-by: Spencer Oliver --- diff --git a/src/target/adi_v5_jtag.c b/src/target/adi_v5_jtag.c index 9f37bd553..e500416b6 100644 --- a/src/target/adi_v5_jtag.c +++ b/src/target/adi_v5_jtag.c @@ -75,10 +75,7 @@ * @param ack points to where the three bit JTAG_ACK_* code will be stored */ -/* FIXME don't export ... this is a temporary workaround for the - * mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific. - */ -int adi_jtag_dp_scan(struct adiv5_dap *dap, +static int adi_jtag_dp_scan(struct adiv5_dap *dap, uint8_t instr, uint8_t reg_addr, uint8_t RnW, uint8_t *outvalue, uint8_t *invalue, uint8_t *ack) { @@ -417,6 +414,40 @@ static int jtag_ap_q_write(struct adiv5_dap *dap, unsigned reg, return adi_jtag_ap_write_check(dap, reg, out_value_buf); } +static int jtag_ap_q_read_block(struct adiv5_dap *dap, unsigned reg, + uint32_t blocksize, uint8_t *buffer) +{ + uint32_t readcount; + int retval = ERROR_OK; + + /* Scan out first read */ + retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, reg, + DPAP_READ, 0, NULL, NULL); + if (retval != ERROR_OK) + return retval; + + for (readcount = 0; readcount < blocksize - 1; readcount++) { + /* Scan out next read; scan in posted value for the + * previous one. Assumes read is acked "OK/FAULT", + * and CTRL_STAT says that meant "OK". + */ + retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, reg, + DPAP_READ, 0, buffer + 4 * readcount, + &dap->ack); + if (retval != ERROR_OK) + return retval; + } + + /* Scan in last posted value; RDBUFF has no other effect, + * assuming ack is OK/FAULT and CTRL_STAT says "OK". + */ + retval = adi_jtag_dp_scan(dap, JTAG_DP_DPACC, DP_RDBUFF, + DPAP_READ, 0, buffer + 4 * readcount, + &dap->ack); + + return retval; +} + static int jtag_ap_q_abort(struct adiv5_dap *dap, uint8_t *ack) { /* for JTAG, this is the only valid ABORT register operation */ @@ -433,13 +464,14 @@ static int jtag_dp_run(struct adiv5_dap *dap) * part of DAP setup */ const struct dap_ops jtag_dp_ops = { - .queue_idcode_read = jtag_idcode_q_read, - .queue_dp_read = jtag_dp_q_read, - .queue_dp_write = jtag_dp_q_write, - .queue_ap_read = jtag_ap_q_read, - .queue_ap_write = jtag_ap_q_write, - .queue_ap_abort = jtag_ap_q_abort, - .run = jtag_dp_run, + .queue_idcode_read = jtag_idcode_q_read, + .queue_dp_read = jtag_dp_q_read, + .queue_dp_write = jtag_dp_q_write, + .queue_ap_read = jtag_ap_q_read, + .queue_ap_write = jtag_ap_q_write, + .queue_ap_read_block = jtag_ap_q_read_block, + .queue_ap_abort = jtag_ap_q_abort, + .run = jtag_dp_run, }; diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c index 1572861dc..28f4318c2 100644 --- a/src/target/arm_adi_v5.c +++ b/src/target/arm_adi_v5.c @@ -539,13 +539,6 @@ int mem_ap_write_buf_u8(struct adiv5_dap *dap, const uint8_t *buffer, int count, return retval; } -/* FIXME don't import ... this is a temporary workaround for the - * mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific. - */ -extern int adi_jtag_dp_scan(struct adiv5_dap *dap, - uint8_t instr, uint8_t reg_addr, uint8_t RnW, - uint8_t *outvalue, uint8_t *invalue, uint8_t *ack); - /** * Synchronously read a block of 32-bit words into a buffer * @param dap The DAP connected to the MEM-AP. @@ -588,38 +581,7 @@ int mem_ap_read_buf_u32(struct adiv5_dap *dap, uint8_t *buffer, if (retval != ERROR_OK) return retval; - /* FIXME remove these three calls to adi_jtag_dp_scan(), - * so this routine becomes transport-neutral. Be careful - * not to cause performance problems with JTAG; would it - * suffice to loop over dap_queue_ap_read(), or would that - * be slower when JTAG is the chosen transport? - */ - - /* Scan out first read */ - retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, AP_REG_DRW, - DPAP_READ, 0, NULL, NULL); - if (retval != ERROR_OK) - return retval; - for (readcount = 0; readcount < blocksize - 1; readcount++) { - /* Scan out next read; scan in posted value for the - * previous one. Assumes read is acked "OK/FAULT", - * and CTRL_STAT says that meant "OK". - */ - retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, AP_REG_DRW, - DPAP_READ, 0, buffer + 4 * readcount, - &dap->ack); - if (retval != ERROR_OK) - return retval; - } - - /* Scan in last posted value; RDBUFF has no other effect, - * assuming ack is OK/FAULT and CTRL_STAT says "OK". - */ - retval = adi_jtag_dp_scan(dap, JTAG_DP_DPACC, DP_RDBUFF, - DPAP_READ, 0, buffer + 4 * readcount, - &dap->ack); - if (retval != ERROR_OK) - return retval; + retval = dap_queue_ap_read_block(dap, AP_REG_DRW, blocksize, buffer); retval = dap_run(dap); if (retval != ERROR_OK) { diff --git a/src/target/arm_adi_v5.h b/src/target/arm_adi_v5.h index 7f1ebf5ef..301402eca 100644 --- a/src/target/arm_adi_v5.h +++ b/src/target/arm_adi_v5.h @@ -216,6 +216,9 @@ struct dap_ops { /** AP register write. */ int (*queue_ap_write)(struct adiv5_dap *dap, unsigned reg, uint32_t data); + /** AP read block. */ + int (*queue_ap_read_block)(struct adiv5_dap *dap, unsigned reg, + uint32_t blocksize, uint8_t *buffer); /** AP operation abort. */ int (*queue_ap_abort)(struct adiv5_dap *dap, uint8_t *ack); @@ -322,6 +325,24 @@ static inline int dap_queue_ap_write(struct adiv5_dap *dap, } /** + * Queue an AP block read. + * + * @param dap The DAP used for reading. + * @param reg The number of the AP register being read. + * @param blocksize The number of the AP register being read. + * @param buffer Pointer saying where to store the data + * (in host endianness). + * + * @return ERROR_OK for success, else a fault code. + */ +static inline int dap_queue_ap_read_block(struct adiv5_dap *dap, + unsigned reg, unsigned blocksize, uint8_t *buffer) +{ + assert(dap->ops != NULL); + return dap->ops->queue_ap_read_block(dap, reg, blocksize, buffer); +} + +/** * Queue an AP abort operation. The current AP transaction is aborted, * including any update of the transaction counter. The AP is left in * an unknown state (so it must be re-initialized). For use only after