1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * Copyright (C) 2011 by Clement Burin des Roziers *
9 * clement.burin-des-roziers@hikob.com *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
32 #include <helper/binarybuffer.h>
33 #include <target/algorithm.h>
34 #include <target/armv7m.h>
36 /* stm32lx flash register locations */
38 #define FLASH_BASE 0x40023C00
39 #define FLASH_ACR 0x40023C00
40 #define FLASH_PECR 0x40023C04
41 #define FLASH_PDKEYR 0x40023C08
42 #define FLASH_PEKEYR 0x40023C0C
43 #define FLASH_PRGKEYR 0x40023C10
44 #define FLASH_OPTKEYR 0x40023C14
45 #define FLASH_SR 0x40023C18
46 #define FLASH_OBR 0x40023C1C
47 #define FLASH_WRPR 0x40023C20
50 #define FLASH_ACR__LATENCY (1<<0)
51 #define FLASH_ACR__PRFTEN (1<<1)
52 #define FLASH_ACR__ACC64 (1<<2)
53 #define FLASH_ACR__SLEEP_PD (1<<3)
54 #define FLASH_ACR__RUN_PD (1<<4)
57 #define FLASH_PECR__PELOCK (1<<0)
58 #define FLASH_PECR__PRGLOCK (1<<1)
59 #define FLASH_PECR__OPTLOCK (1<<2)
60 #define FLASH_PECR__PROG (1<<3)
61 #define FLASH_PECR__DATA (1<<4)
62 #define FLASH_PECR__FTDW (1<<8)
63 #define FLASH_PECR__ERASE (1<<9)
64 #define FLASH_PECR__FPRG (1<<10)
65 #define FLASH_PECR__EOPIE (1<<16)
66 #define FLASH_PECR__ERRIE (1<<17)
67 #define FLASH_PECR__OBL_LAUNCH (1<<18)
70 #define FLASH_SR__BSY (1<<0)
71 #define FLASH_SR__EOP (1<<1)
72 #define FLASH_SR__ENDHV (1<<2)
73 #define FLASH_SR__READY (1<<3)
74 #define FLASH_SR__WRPERR (1<<8)
75 #define FLASH_SR__PGAERR (1<<9)
76 #define FLASH_SR__SIZERR (1<<10)
77 #define FLASH_SR__OPTVERR (1<<11)
80 #define PEKEY1 0x89ABCDEF
81 #define PEKEY2 0x02030405
82 #define PRGKEY1 0x8C9DAEBF
83 #define PRGKEY2 0x13141516
84 #define OPTKEY1 0xFBEAD9C8
85 #define OPTKEY2 0x24252627
88 #define DBGMCU_IDCODE 0xE0042000
89 #define F_SIZE 0x1FF8004C
92 #define FLASH_PAGE_SIZE 256
93 #define FLASH_SECTOR_SIZE 4096
94 #define FLASH_PAGES_PER_SECTOR 16
95 #define FLASH_BANK0_ADDRESS 0x08000000
97 /* stm32lx option byte register location */
98 #define OB_RDP 0x1FF80000
99 #define OB_USER 0x1FF80004
100 #define OB_WRP0_1 0x1FF80008
101 #define OB_WRP2_3 0x1FF8000C
104 #define OB_RDP__LEVEL0 0xFF5500AA
105 #define OB_RDP__LEVEL1 0xFFFF0000
107 /* stm32lx RCC register locations */
108 #define RCC_CR 0x40023800
109 #define RCC_ICSCR 0x40023804
110 #define RCC_CFGR 0x40023808
113 #define RCC_ICSCR__MSIRANGE_MASK (7<<13)
115 static int stm32lx_unlock_program_memory(struct flash_bank
*bank
);
116 static int stm32lx_lock_program_memory(struct flash_bank
*bank
);
117 static int stm32lx_enable_write_half_page(struct flash_bank
*bank
);
118 static int stm32lx_erase_sector(struct flash_bank
*bank
, int sector
);
119 static int stm32lx_wait_until_bsy_clear(struct flash_bank
*bank
);
121 struct stm32lx_flash_bank
{
125 /* flash bank stm32lx <base> <size> 0 0 <target#>
127 FLASH_BANK_COMMAND_HANDLER(stm32lx_flash_bank_command
)
129 struct stm32lx_flash_bank
*stm32lx_info
;
131 return ERROR_COMMAND_SYNTAX_ERROR
;
133 /* Create the bank structure */
134 stm32lx_info
= malloc(sizeof(struct stm32lx_flash_bank
));
136 /* Check allocation */
137 if (stm32lx_info
== NULL
) {
138 LOG_ERROR("failed to allocate bank structure");
142 bank
->driver_priv
= stm32lx_info
;
144 stm32lx_info
->probed
= 0;
149 static int stm32lx_protect_check(struct flash_bank
*bank
)
152 struct target
*target
= bank
->target
;
156 if (target
->state
!= TARGET_HALTED
) {
157 LOG_ERROR("Target not halted");
158 return ERROR_TARGET_NOT_HALTED
;
162 * Read the WRPR word, and check each bit (corresponding to each
165 retval
= target_read_u32(target
, FLASH_WRPR
, &wrpr
);
166 if (retval
!= ERROR_OK
)
169 for (int i
= 0; i
< 32; i
++) {
171 bank
->sectors
[i
].is_protected
= 1;
173 bank
->sectors
[i
].is_protected
= 0;
178 static int stm32lx_erase(struct flash_bank
*bank
, int first
, int last
)
183 * It could be possible to do a mass erase if all sectors must be
184 * erased, but it is not implemented yet.
187 if (bank
->target
->state
!= TARGET_HALTED
) {
188 LOG_ERROR("Target not halted");
189 return ERROR_TARGET_NOT_HALTED
;
193 * Loop over the selected sectors and erase them
195 for (int i
= first
; i
<= last
; i
++) {
196 retval
= stm32lx_erase_sector(bank
, i
);
197 if (retval
!= ERROR_OK
)
199 bank
->sectors
[i
].is_erased
= 1;
204 static int stm32lx_protect(struct flash_bank
*bank
, int set
, int first
,
207 LOG_WARNING("protection of the STM32L flash is not implemented");
211 static int stm32lx_write_half_pages(struct flash_bank
*bank
, uint8_t *buffer
,
212 uint32_t offset
, uint32_t count
)
214 struct target
*target
= bank
->target
;
215 uint32_t buffer_size
= 16384;
216 struct working_area
*write_algorithm
;
217 struct working_area
*source
;
218 uint32_t address
= bank
->base
+ offset
;
220 struct reg_param reg_params
[3];
221 struct armv7m_algorithm armv7m_info
;
223 int retval
= ERROR_OK
;
225 /* see contib/loaders/flash/stm32lx.S for src */
227 static const uint8_t stm32lx_flash_write_code
[] = {
229 0x00, 0x23, /* movs r3, #0 */
230 0x04, 0xe0, /* b test_done */
233 0x51, 0xf8, 0x04, 0xcb, /* ldr ip, [r1], #4 */
234 0x40, 0xf8, 0x04, 0xcb, /* str ip, [r0], #4 */
235 0x01, 0x33, /* adds r3, #1 */
238 0x93, 0x42, /* cmp r3, r2 */
239 0xf8, 0xd3, /* bcc write_word */
240 0x00, 0xbe, /* bkpt 0 */
243 /* Check if there is an even number of half pages (128bytes) */
245 LOG_ERROR("there should be an even number "
246 "of half pages = 128 bytes (count = %" PRIi32
" bytes)", count
);
250 /* flash write code */
251 if (target_alloc_working_area(target
, sizeof(stm32lx_flash_write_code
),
252 &write_algorithm
) != ERROR_OK
) {
253 LOG_DEBUG("no working area for block memory writes");
254 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
257 /* Write the flashing code */
258 retval
= target_write_buffer(target
,
259 write_algorithm
->address
,
260 sizeof(stm32lx_flash_write_code
),
261 (uint8_t *)stm32lx_flash_write_code
);
262 if (retval
!= ERROR_OK
) {
263 target_free_working_area(target
, write_algorithm
);
267 /* Allocate half pages memory */
268 while (target_alloc_working_area_try(target
, buffer_size
, &source
) != ERROR_OK
) {
269 if (buffer_size
> 1024)
274 if (buffer_size
<= 256) {
275 /* we already allocated the writing code, but failed to get a
276 * buffer, free the algorithm */
277 target_free_working_area(target
, write_algorithm
);
279 LOG_WARNING("no large enough working area available, can't do block memory writes");
280 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
284 armv7m_info
.common_magic
= ARMV7M_COMMON_MAGIC
;
285 armv7m_info
.core_mode
= ARMV7M_MODE_ANY
;
286 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
287 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
288 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
290 /* Enable half-page write */
291 retval
= stm32lx_enable_write_half_page(bank
);
292 if (retval
!= ERROR_OK
) {
293 target_free_working_area(target
, source
);
294 target_free_working_area(target
, write_algorithm
);
296 destroy_reg_param(®_params
[0]);
297 destroy_reg_param(®_params
[1]);
298 destroy_reg_param(®_params
[2]);
302 /* Loop while there are bytes to write */
305 this_count
= (count
> buffer_size
) ? buffer_size
: count
;
307 /* Write the next half pages */
308 retval
= target_write_buffer(target
, source
->address
, this_count
, buffer
);
309 if (retval
!= ERROR_OK
)
312 /* 4: Store useful information in the registers */
313 /* the destination address of the copy (R0) */
314 buf_set_u32(reg_params
[0].value
, 0, 32, address
);
315 /* The source address of the copy (R1) */
316 buf_set_u32(reg_params
[1].value
, 0, 32, source
->address
);
317 /* The length of the copy (R2) */
318 buf_set_u32(reg_params
[2].value
, 0, 32, this_count
/ 4);
320 /* 5: Execute the bunch of code */
321 retval
= target_run_algorithm(target
, 0, NULL
, sizeof(reg_params
)
322 / sizeof(*reg_params
), reg_params
,
323 write_algorithm
->address
, 0, 10000, &armv7m_info
);
324 if (retval
!= ERROR_OK
)
327 /* 6: Wait while busy */
328 retval
= stm32lx_wait_until_bsy_clear(bank
);
329 if (retval
!= ERROR_OK
)
332 buffer
+= this_count
;
333 address
+= this_count
;
337 if (retval
== ERROR_OK
)
338 retval
= stm32lx_lock_program_memory(bank
);
340 target_free_working_area(target
, source
);
341 target_free_working_area(target
, write_algorithm
);
343 destroy_reg_param(®_params
[0]);
344 destroy_reg_param(®_params
[1]);
345 destroy_reg_param(®_params
[2]);
350 static int stm32lx_write(struct flash_bank
*bank
, uint8_t *buffer
,
351 uint32_t offset
, uint32_t count
)
353 struct target
*target
= bank
->target
;
355 uint32_t halfpages_number
;
356 uint32_t bytes_remaining
= 0;
357 uint32_t address
= bank
->base
+ offset
;
358 uint32_t bytes_written
= 0;
361 if (bank
->target
->state
!= TARGET_HALTED
) {
362 LOG_ERROR("Target not halted");
363 return ERROR_TARGET_NOT_HALTED
;
367 LOG_ERROR("offset 0x%" PRIx32
" breaks required 4-byte alignment", offset
);
368 return ERROR_FLASH_DST_BREAKS_ALIGNMENT
;
371 retval
= stm32lx_unlock_program_memory(bank
);
372 if (retval
!= ERROR_OK
)
375 /* first we need to write any unaligned head bytes upto
376 * the next 128 byte page */
379 bytes_remaining
= MIN(count
, 128 - (offset
% 128));
381 while (bytes_remaining
> 0) {
382 uint8_t value
[4] = {0xff, 0xff, 0xff, 0xff};
384 /* copy remaining bytes into the write buffer */
385 uint32_t bytes_to_write
= MIN(4, bytes_remaining
);
386 memcpy(value
, buffer
+ bytes_written
, bytes_to_write
);
388 retval
= target_write_buffer(target
, address
, 4, value
);
389 if (retval
!= ERROR_OK
)
390 goto reset_pg_and_lock
;
392 bytes_written
+= bytes_to_write
;
393 bytes_remaining
-= bytes_to_write
;
396 retval
= stm32lx_wait_until_bsy_clear(bank
);
397 if (retval
!= ERROR_OK
)
398 goto reset_pg_and_lock
;
401 offset
+= bytes_written
;
402 count
-= bytes_written
;
404 /* this should always pass this check here */
405 assert((offset
% 128) == 0);
407 /* calculate half pages */
408 halfpages_number
= count
/ 128;
410 if (halfpages_number
) {
411 retval
= stm32lx_write_half_pages(bank
, buffer
+ bytes_written
, offset
, 128 * halfpages_number
);
412 if (retval
== ERROR_TARGET_RESOURCE_NOT_AVAILABLE
) {
413 /* attempt slow memory writes */
414 LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
415 halfpages_number
= 0;
417 if (retval
!= ERROR_OK
)
422 /* write any remaining bytes */
423 uint32_t page_bytes_written
= 128 * halfpages_number
;
424 bytes_written
+= page_bytes_written
;
425 address
+= page_bytes_written
;
426 bytes_remaining
= count
- page_bytes_written
;
428 retval
= stm32lx_unlock_program_memory(bank
);
429 if (retval
!= ERROR_OK
)
432 while (bytes_remaining
> 0) {
433 uint8_t value
[4] = {0xff, 0xff, 0xff, 0xff};
435 /* copy remaining bytes into the write buffer */
436 uint32_t bytes_to_write
= MIN(4, bytes_remaining
);
437 memcpy(value
, buffer
+ bytes_written
, bytes_to_write
);
439 retval
= target_write_buffer(target
, address
, 4, value
);
440 if (retval
!= ERROR_OK
)
441 goto reset_pg_and_lock
;
443 bytes_written
+= bytes_to_write
;
444 bytes_remaining
-= bytes_to_write
;
447 retval
= stm32lx_wait_until_bsy_clear(bank
);
448 if (retval
!= ERROR_OK
)
449 goto reset_pg_and_lock
;
453 retval2
= stm32lx_lock_program_memory(bank
);
454 if (retval
== ERROR_OK
)
460 static int stm32lx_probe(struct flash_bank
*bank
)
462 struct target
*target
= bank
->target
;
463 struct stm32lx_flash_bank
*stm32lx_info
= bank
->driver_priv
;
465 uint16_t flash_size_in_kb
;
466 uint16_t max_flash_size_in_kb
;
469 stm32lx_info
->probed
= 0;
471 /* read stm32 device id register */
472 int retval
= target_read_u32(target
, DBGMCU_IDCODE
, &device_id
);
473 if (retval
!= ERROR_OK
)
476 LOG_DEBUG("device id = 0x%08" PRIx32
"", device_id
);
478 /* set max flash size depending on family */
479 switch (device_id
& 0xfff) {
481 max_flash_size_in_kb
= 128;
484 max_flash_size_in_kb
= 384;
487 LOG_WARNING("Cannot identify target as a STM32L family.");
491 /* get flash size from target. */
492 retval
= target_read_u16(target
, F_SIZE
, &flash_size_in_kb
);
494 /* failed reading flash size or flash size invalid (early silicon),
495 * default to max target family */
496 if (retval
!= ERROR_OK
|| flash_size_in_kb
== 0xffff || flash_size_in_kb
== 0) {
497 LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
498 max_flash_size_in_kb
);
499 flash_size_in_kb
= max_flash_size_in_kb
;
502 /* STM32L - we have 32 sectors, 16 pages per sector -> 512 pages
503 * 16 pages for a protection area */
505 /* calculate numbers of sectors (4kB per sector) */
506 int num_sectors
= (flash_size_in_kb
* 1024) / FLASH_SECTOR_SIZE
;
507 LOG_INFO("flash size = %dkbytes", flash_size_in_kb
);
511 bank
->sectors
= NULL
;
514 bank
->base
= FLASH_BANK0_ADDRESS
;
515 bank
->size
= flash_size_in_kb
* 1024;
516 bank
->num_sectors
= num_sectors
;
517 bank
->sectors
= malloc(sizeof(struct flash_sector
) * num_sectors
);
518 if (bank
->sectors
== NULL
) {
519 LOG_ERROR("failed to allocate bank sectors");
523 for (i
= 0; i
< num_sectors
; i
++) {
524 bank
->sectors
[i
].offset
= i
* FLASH_SECTOR_SIZE
;
525 bank
->sectors
[i
].size
= FLASH_SECTOR_SIZE
;
526 bank
->sectors
[i
].is_erased
= -1;
527 bank
->sectors
[i
].is_protected
= 1;
530 stm32lx_info
->probed
= 1;
535 static int stm32lx_auto_probe(struct flash_bank
*bank
)
537 struct stm32lx_flash_bank
*stm32lx_info
= bank
->driver_priv
;
539 if (stm32lx_info
->probed
)
542 return stm32lx_probe(bank
);
545 static int stm32lx_erase_check(struct flash_bank
*bank
)
547 struct target
*target
= bank
->target
;
548 const int buffer_size
= 4096;
551 int retval
= ERROR_OK
;
553 if (bank
->target
->state
!= TARGET_HALTED
) {
554 LOG_ERROR("Target not halted");
555 return ERROR_TARGET_NOT_HALTED
;
558 uint8_t *buffer
= malloc(buffer_size
);
559 if (buffer
== NULL
) {
560 LOG_ERROR("failed to allocate read buffer");
564 for (i
= 0; i
< bank
->num_sectors
; i
++) {
566 bank
->sectors
[i
].is_erased
= 1;
568 /* Loop chunk by chunk over the sector */
569 for (j
= 0; j
< bank
->sectors
[i
].size
; j
+= buffer_size
) {
572 if (chunk
> (j
- bank
->sectors
[i
].size
))
573 chunk
= (j
- bank
->sectors
[i
].size
);
575 retval
= target_read_memory(target
, bank
->base
576 + bank
->sectors
[i
].offset
+ j
, 4, chunk
/ 4, buffer
);
577 if (retval
!= ERROR_OK
)
580 for (nBytes
= 0; nBytes
< chunk
; nBytes
++) {
581 if (buffer
[nBytes
] != 0x00) {
582 bank
->sectors
[i
].is_erased
= 0;
587 if (retval
!= ERROR_OK
)
595 static int stm32lx_get_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
597 /* This method must return a string displaying information about the bank */
599 struct target
*target
= bank
->target
;
603 /* read stm32 device id register */
604 int retval
= target_read_u32(target
, DBGMCU_IDCODE
, &device_id
);
605 if (retval
!= ERROR_OK
)
608 if ((device_id
& 0xfff) == 0x416) {
609 printed
= snprintf(buf
, buf_size
, "stm32lx - Rev: ");
613 switch (device_id
>> 16) {
615 snprintf(buf
, buf_size
, "A");
619 snprintf(buf
, buf_size
, "Y");
623 snprintf(buf
, buf_size
, "X");
627 snprintf(buf
, buf_size
, "W");
631 snprintf(buf
, buf_size
, "V");
635 snprintf(buf
, buf_size
, "unknown");
638 } else if ((device_id
& 0xfff) == 0x436) {
639 printed
= snprintf(buf
, buf_size
, "stm32lx (HD) - Rev: ");
643 switch (device_id
>> 16) {
645 snprintf(buf
, buf_size
, "A");
649 snprintf(buf
, buf_size
, "Z");
653 snprintf(buf
, buf_size
, "Y");
657 snprintf(buf
, buf_size
, "unknown");
661 snprintf(buf
, buf_size
, "Cannot identify target as a stm32lx");
668 static const struct command_registration stm32lx_exec_command_handlers
[] = {
669 COMMAND_REGISTRATION_DONE
672 static const struct command_registration stm32lx_command_handlers
[] = {
676 .help
= "stm32lx flash command group",
678 .chain
= stm32lx_exec_command_handlers
,
680 COMMAND_REGISTRATION_DONE
683 struct flash_driver stm32lx_flash
= {
685 .commands
= stm32lx_command_handlers
,
686 .flash_bank_command
= stm32lx_flash_bank_command
,
687 .erase
= stm32lx_erase
,
688 .protect
= stm32lx_protect
,
689 .write
= stm32lx_write
,
690 .read
= default_flash_read
,
691 .probe
= stm32lx_probe
,
692 .auto_probe
= stm32lx_auto_probe
,
693 .erase_check
= stm32lx_erase_check
,
694 .protect_check
= stm32lx_protect_check
,
695 .info
= stm32lx_get_info
,
698 /* Static methods implementation */
699 static int stm32lx_unlock_program_memory(struct flash_bank
*bank
)
701 struct target
*target
= bank
->target
;
706 * Unlocking the program memory is done by unlocking the PECR,
707 * then by writing the 2 PRGKEY to the PRGKEYR register
710 /* check flash is not already unlocked */
711 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
712 if (retval
!= ERROR_OK
)
715 if ((reg32
& FLASH_PECR__PRGLOCK
) == 0)
718 /* To unlock the PECR write the 2 PEKEY to the PEKEYR register */
719 retval
= target_write_u32(target
, FLASH_PEKEYR
, PEKEY1
);
720 if (retval
!= ERROR_OK
)
723 retval
= target_write_u32(target
, FLASH_PEKEYR
, PEKEY2
);
724 if (retval
!= ERROR_OK
)
727 /* Make sure it worked */
728 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
729 if (retval
!= ERROR_OK
)
732 if (reg32
& FLASH_PECR__PELOCK
) {
733 LOG_ERROR("PELOCK is not cleared :(");
734 return ERROR_FLASH_OPERATION_FAILED
;
737 retval
= target_write_u32(target
, FLASH_PRGKEYR
, PRGKEY1
);
738 if (retval
!= ERROR_OK
)
740 retval
= target_write_u32(target
, FLASH_PRGKEYR
, PRGKEY2
);
741 if (retval
!= ERROR_OK
)
744 /* Make sure it worked */
745 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
746 if (retval
!= ERROR_OK
)
749 if (reg32
& FLASH_PECR__PRGLOCK
) {
750 LOG_ERROR("PRGLOCK is not cleared :(");
751 return ERROR_FLASH_OPERATION_FAILED
;
757 static int stm32lx_enable_write_half_page(struct flash_bank
*bank
)
759 struct target
*target
= bank
->target
;
764 * Unlock the program memory, then set the FPRG bit in the PECR register.
766 retval
= stm32lx_unlock_program_memory(bank
);
767 if (retval
!= ERROR_OK
)
770 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
771 if (retval
!= ERROR_OK
)
774 reg32
|= FLASH_PECR__FPRG
;
775 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
776 if (retval
!= ERROR_OK
)
779 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
780 if (retval
!= ERROR_OK
)
783 reg32
|= FLASH_PECR__PROG
;
784 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
789 static int stm32lx_lock_program_memory(struct flash_bank
*bank
)
791 struct target
*target
= bank
->target
;
795 /* To lock the program memory, simply set the lock bit and lock PECR */
797 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
798 if (retval
!= ERROR_OK
)
801 reg32
|= FLASH_PECR__PRGLOCK
;
802 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
803 if (retval
!= ERROR_OK
)
806 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
807 if (retval
!= ERROR_OK
)
810 reg32
|= FLASH_PECR__PELOCK
;
811 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
812 if (retval
!= ERROR_OK
)
818 static int stm32lx_erase_sector(struct flash_bank
*bank
, int sector
)
820 struct target
*target
= bank
->target
;
825 * To erase a sector (i.e. FLASH_PAGES_PER_SECTOR pages),
826 * first unlock the memory, loop over the pages of this sector
827 * and write 0x0 to its first word.
830 retval
= stm32lx_unlock_program_memory(bank
);
831 if (retval
!= ERROR_OK
)
834 for (int page
= 0; page
< FLASH_PAGES_PER_SECTOR
; page
++) {
835 reg32
= FLASH_PECR__PROG
| FLASH_PECR__ERASE
;
836 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
837 if (retval
!= ERROR_OK
)
840 retval
= stm32lx_wait_until_bsy_clear(bank
);
841 if (retval
!= ERROR_OK
)
844 uint32_t addr
= bank
->base
+ bank
->sectors
[sector
].offset
+ (page
846 retval
= target_write_u32(target
, addr
, 0x0);
847 if (retval
!= ERROR_OK
)
850 retval
= stm32lx_wait_until_bsy_clear(bank
);
851 if (retval
!= ERROR_OK
)
855 retval
= stm32lx_lock_program_memory(bank
);
856 if (retval
!= ERROR_OK
)
862 static int stm32lx_wait_until_bsy_clear(struct flash_bank
*bank
)
864 struct target
*target
= bank
->target
;
866 int retval
= ERROR_OK
;
869 /* wait for busy to clear */
871 retval
= target_read_u32(target
, FLASH_SR
, &status
);
872 if (retval
!= ERROR_OK
)
875 if ((status
& FLASH_SR__BSY
) == 0)
877 if (timeout
-- <= 0) {
878 LOG_ERROR("timed out waiting for flash");
884 if (status
& FLASH_SR__WRPERR
) {
885 LOG_ERROR("access denied / write protected");
889 if (status
& FLASH_SR__PGAERR
) {
890 LOG_ERROR("invalid program address");