1 /***************************************************************************
2 * Copyright (C) 2011 by Martin Schmoelzer *
3 * <martin.schmoelzer@student.tuwien.ac.at> *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
19 ***************************************************************************/
23 * Defines USB descriptors, interrupt routines and helper functions.
24 * To minimize code size, we make the following assumptions:
25 * - The OpenULINK has exactly one configuration
26 * - and exactly one alternate setting
28 * Therefore, we do not have to support the Set Configuration USB request.
35 /* Also update external declarations in "include/usb.h" if making changes to
37 volatile bool EP2_out
;
40 volatile __xdata __at
0x7FE8 struct setup_data setup_data
;
42 /* Define number of endpoints (except Control Endpoint 0) in a central place.
43 * Be sure to include the neccessary endpoint descriptors! */
44 #define NUM_ENDPOINTS 2
47 * Normally, we would initialize the descriptor structures in C99 style:
49 * __code usb_device_descriptor_t device_descriptor = {
51 * .bDescriptorType = bar,
56 * But SDCC currently does not support this, so we have to do it the
57 * old-fashioned way...
60 __code
struct usb_device_descriptor device_descriptor
= {
61 /* .bLength = */ sizeof(struct usb_device_descriptor
),
62 /* .bDescriptorType = */ DESCRIPTOR_TYPE_DEVICE
,
63 /* .bcdUSB = */ 0x0110, /* BCD: 01.00 (Version 1.0 USB spec) */
64 /* .bDeviceClass = */ 0xFF, /* 0xFF = vendor-specific */
65 /* .bDeviceSubClass = */ 0xFF,
66 /* .bDeviceProtocol = */ 0xFF,
67 /* .bMaxPacketSize0 = */ 64,
68 /* .idVendor = */ 0xC251,
69 /* .idProduct = */ 0x2710,
70 /* .bcdDevice = */ 0x0100,
71 /* .iManufacturer = */ 1,
73 /* .iSerialNumber = */ 3,
74 /* .bNumConfigurations = */ 1
77 /* WARNING: ALL config, interface and endpoint descriptors MUST be adjacent! */
79 __code
struct usb_config_descriptor config_descriptor
= {
80 /* .bLength = */ sizeof(struct usb_config_descriptor
),
81 /* .bDescriptorType = */ DESCRIPTOR_TYPE_CONFIGURATION
,
82 /* .wTotalLength = */ sizeof(struct usb_config_descriptor
) +
83 sizeof(struct usb_interface_descriptor
) +
85 sizeof(struct usb_endpoint_descriptor
)),
86 /* .bNumInterfaces = */ 1,
87 /* .bConfigurationValue = */ 1,
88 /* .iConfiguration = */ 4, /* String describing this configuration */
89 /* .bmAttributes = */ 0x80, /* Only MSB set according to USB spec */
90 /* .MaxPower = */ 50 /* 100 mA */
93 __code
struct usb_interface_descriptor interface_descriptor00
= {
94 /* .bLength = */ sizeof(struct usb_interface_descriptor
),
95 /* .bDescriptorType = */ DESCRIPTOR_TYPE_INTERFACE
,
96 /* .bInterfaceNumber = */ 0,
97 /* .bAlternateSetting = */ 0,
98 /* .bNumEndpoints = */ NUM_ENDPOINTS
,
99 /* .bInterfaceClass = */ 0xFF,
100 /* .bInterfaceSubclass = */ 0xFF,
101 /* .bInterfaceProtocol = */ 0xFF,
102 /* .iInterface = */ 0
105 __code
struct usb_endpoint_descriptor Bulk_EP2_IN_Endpoint_Descriptor
= {
106 /* .bLength = */ sizeof(struct usb_endpoint_descriptor
),
107 /* .bDescriptorType = */ 0x05,
108 /* .bEndpointAddress = */ 2 | USB_DIR_IN
,
109 /* .bmAttributes = */ 0x02,
110 /* .wMaxPacketSize = */ 64,
114 __code
struct usb_endpoint_descriptor Bulk_EP2_OUT_Endpoint_Descriptor
= {
115 /* .bLength = */ sizeof(struct usb_endpoint_descriptor
),
116 /* .bDescriptorType = */ 0x05,
117 /* .bEndpointAddress = */ 2 | USB_DIR_OUT
,
118 /* .bmAttributes = */ 0x02,
119 /* .wMaxPacketSize = */ 64,
123 __code
struct usb_language_descriptor language_descriptor
= {
125 /* .bDescriptorType = */ DESCRIPTOR_TYPE_STRING
,
126 /* .wLANGID = */ {0x0409 /* US English */}
129 __code
struct usb_string_descriptor strManufacturer
=
130 STR_DESCR(9, 'O', 'p', 'e', 'n', 'U', 'L', 'I', 'N', 'K');
132 __code
struct usb_string_descriptor strProduct
=
133 STR_DESCR(9, 'O', 'p', 'e', 'n', 'U', 'L', 'I', 'N', 'K');
135 __code
struct usb_string_descriptor strSerialNumber
=
136 STR_DESCR(6, '0', '0', '0', '0', '0', '1');
138 __code
struct usb_string_descriptor strConfigDescr
=
139 STR_DESCR(12, 'J', 'T', 'A', 'G', ' ', 'A', 'd', 'a', 'p', 't', 'e', 'r');
141 /* Table containing pointers to string descriptors */
142 __code
struct usb_string_descriptor
*__code en_string_descriptors
[4] = {
149 void sudav_isr(void) __interrupt SUDAV_ISR
153 usb_handle_setup_data();
159 void sof_isr(void) __interrupt SOF_ISR
162 void sutok_isr(void) __interrupt SUTOK_ISR
165 void suspend_isr(void) __interrupt SUSPEND_ISR
168 void usbreset_isr(void) __interrupt USBRESET_ISR
171 void ibn_isr(void) __interrupt IBN_ISR
175 void ep0in_isr(void) __interrupt EP0IN_ISR
178 void ep0out_isr(void) __interrupt EP0OUT_ISR
181 void ep1in_isr(void) __interrupt EP1IN_ISR
184 void ep1out_isr(void) __interrupt EP1OUT_ISR
189 * EP2 IN: called after the transfer from uC->Host has finished: we sent data
191 void ep2in_isr(void) __interrupt EP2IN_ISR
196 IN07IRQ
= IN2IR
;/* Clear OUT2 IRQ */
200 * EP2 OUT: called after the transfer from Host->uC has finished: we got data
202 void ep2out_isr(void) __interrupt EP2OUT_ISR
207 OUT07IRQ
= OUT2IR
; /* Clear OUT2 IRQ */
210 void ep3in_isr(void) __interrupt EP3IN_ISR
213 void ep3out_isr(void) __interrupt EP3OUT_ISR
216 void ep4in_isr(void) __interrupt EP4IN_ISR
219 void ep4out_isr(void) __interrupt EP4OUT_ISR
222 void ep5in_isr(void) __interrupt EP5IN_ISR
225 void ep5out_isr(void) __interrupt EP5OUT_ISR
228 void ep6in_isr(void) __interrupt EP6IN_ISR
231 void ep6out_isr(void) __interrupt EP6OUT_ISR
234 void ep7in_isr(void) __interrupt EP7IN_ISR
237 void ep7out_isr(void) __interrupt EP7OUT_ISR
242 * Return the control/status register for an endpoint
244 * @param ep endpoint address
245 * @return on success: pointer to Control & Status register for endpoint
247 * @return on failure: NULL
249 __xdata
uint8_t *usb_get_endpoint_cs_reg(uint8_t ep
)
251 /* Mask direction bit */
252 uint8_t ep_num
= ep
& 0x7F;
259 return ep
& 0x80 ? &IN1CS
: &OUT1CS
;
262 return ep
& 0x80 ? &IN2CS
: &OUT2CS
;
265 return ep
& 0x80 ? &IN3CS
: &OUT3CS
;
268 return ep
& 0x80 ? &IN4CS
: &OUT4CS
;
271 return ep
& 0x80 ? &IN5CS
: &OUT5CS
;
274 return ep
& 0x80 ? &IN6CS
: &OUT6CS
;
277 return ep
& 0x80 ? &IN7CS
: &OUT7CS
;
284 void usb_reset_data_toggle(uint8_t ep
)
287 +----+-----+-----+------+-----+-------+-------+-------+
288 | Q | S | R | IO | 0 | EP2 | EP1 | EP0 |
289 +----+-----+-----+------+-----+-------+-------+-------+
291 To reset data toggle bits, we have to write the endpoint direction (IN/OUT)
292 to the IO bit and the endpoint number to the EP2..EP0 bits. Then, in a
293 separate write cycle, the R bit needs to be set.
295 uint8_t togctl_value
= (ep
& 0x80 >> 3) | (ep
& 0x7);
297 /* First step: Write EP number and direction bit */
298 TOGCTL
= togctl_value
;
300 /* Second step: Set R bit */
301 togctl_value
|= TOG_R
;
302 TOGCTL
= togctl_value
;
306 * Handle GET_STATUS request.
308 * @return on success: true
309 * @return on failure: false
311 bool usb_handle_get_status(void)
315 switch (setup_data
.bmRequestType
) {
317 /* Two byte response: Byte 0, Bit 0 = self-powered, Bit 1 = remote wakeup.
318 * Byte 1: reserved, reset to zero */
326 /* Always return two zero bytes according to USB 1.1 spec, p. 191 */
334 /* Get stall bit for endpoint specified in low byte of wIndex */
335 ep_cs
= usb_get_endpoint_cs_reg(setup_data
.wIndex
& 0xff);
337 if (*ep_cs
& EPSTALL
)
342 /* Second byte sent has to be always zero */
357 * Handle CLEAR_FEATURE request.
359 * @return on success: true
360 * @return on failure: false
362 bool usb_handle_clear_feature(void)
364 __xdata
uint8_t *ep_cs
;
366 switch (setup_data
.bmRequestType
) {
368 /* Clear remote wakeup not supported: stall EP0 */
372 if (setup_data
.wValue
== 0) {
373 /* Unstall the endpoint specified in wIndex */
374 ep_cs
= usb_get_endpoint_cs_reg(setup_data
.wIndex
);
379 /* Unsupported feature, stall EP0 */
384 /* Vendor commands... */
391 * Handle SET_FEATURE request.
393 * @return on success: true
394 * @return on failure: false
396 bool usb_handle_set_feature(void)
398 __xdata
uint8_t *ep_cs
;
400 switch (setup_data
.bmRequestType
) {
402 if (setup_data
.wValue
== 2)
406 if (setup_data
.wValue
== 0) {
407 /* Stall the endpoint specified in wIndex */
408 ep_cs
= usb_get_endpoint_cs_reg(setup_data
.wIndex
);
413 /* Unsupported endpoint feature */
418 /* Vendor commands... */
426 * Handle GET_DESCRIPTOR request.
428 * @return on success: true
429 * @return on failure: false
431 bool usb_handle_get_descriptor(void)
433 __xdata
uint8_t descriptor_type
;
434 __xdata
uint8_t descriptor_index
;
436 descriptor_type
= (setup_data
.wValue
& 0xff00) >> 8;
437 descriptor_index
= setup_data
.wValue
& 0x00ff;
439 switch (descriptor_type
) {
440 case DESCRIPTOR_TYPE_DEVICE
:
441 SUDPTRH
= HI8(&device_descriptor
);
442 SUDPTRL
= LO8(&device_descriptor
);
444 case DESCRIPTOR_TYPE_CONFIGURATION
:
445 SUDPTRH
= HI8(&config_descriptor
);
446 SUDPTRL
= LO8(&config_descriptor
);
448 case DESCRIPTOR_TYPE_STRING
:
449 if (setup_data
.wIndex
== 0) {
450 /* Supply language descriptor */
451 SUDPTRH
= HI8(&language_descriptor
);
452 SUDPTRL
= LO8(&language_descriptor
);
453 } else if (setup_data
.wIndex
== 0x0409 /* US English */) {
454 /* Supply string descriptor */
455 SUDPTRH
= HI8(en_string_descriptors
[descriptor_index
- 1]);
456 SUDPTRL
= LO8(en_string_descriptors
[descriptor_index
- 1]);
461 /* Unsupported descriptor type */
470 * Handle SET_INTERFACE request.
472 void usb_handle_set_interface(void)
474 /* Reset Data Toggle */
475 usb_reset_data_toggle(USB_DIR_IN
| 2);
476 usb_reset_data_toggle(USB_DIR_OUT
| 2);
478 /* Unstall & clear busy flag of all valid IN endpoints */
481 /* Unstall all valid OUT endpoints, reset bytecounts */
487 * Handle the arrival of a USB Control Setup Packet.
489 void usb_handle_setup_data(void)
491 switch (setup_data
.bRequest
) {
493 if (!usb_handle_get_status())
497 if (!usb_handle_clear_feature())
501 /* Reserved values */
505 if (!usb_handle_set_feature())
509 /* Handled by USB core */
512 /* Set Descriptor not supported. */
516 if (!usb_handle_get_descriptor())
519 case GET_CONFIGURATION
:
520 /* OpenULINK has only one configuration, return its index */
521 IN0BUF
[0] = config_descriptor
.bConfigurationValue
;
524 case SET_CONFIGURATION
:
525 /* OpenULINK has only one configuration -> nothing to do */
528 /* OpenULINK only has one interface, return its number */
529 IN0BUF
[0] = interface_descriptor00
.bInterfaceNumber
;
533 usb_handle_set_interface();
536 /* Isochronous endpoints not used -> nothing to do */
539 /* Any other requests: do nothing */
545 * USB initialization. Configures USB interrupts, endpoints and performs
550 /* Mark endpoint 2 IN & OUT as valid */
554 /* Make sure no isochronous endpoints are marked valid */
558 /* Disable isochronous endpoints. This makes the isochronous data buffers
559 * available as 8051 XDATA memory at address 0x2000 - 0x27FF */
562 /* Enable USB Autovectoring */
565 /* Enable SUDAV interrupt */
568 /* Enable EP2 OUT & IN interrupts */
572 /* Enable USB interrupt (EIE register) */
575 /* Perform ReNumeration */
576 USBCS
= DISCON
| RENUM
;
578 USBCS
= DISCOE
| RENUM
;