3 This is detailed explanation of each parameters for iwpriv.
\r
4 Before reading this document, make sure you already read README.
\r
6 -------------------------------------------------------------------------------------------------------
\r
8 iwpriv ra0 set [parameters]=[val]
\r
12 [parameters] [val] range explaination
\r
13 ----------------- ----------------------- ---------------------------------------------
\r
14 CountryRegion {0~7} Set country region
\r
15 0: use 1 ~ 11 Channel
\r
16 1: use 1 ~ 11 Channel
\r
17 2: use 1 ~ 13 Channel
\r
18 3: use 10, 11 Channel
\r
19 4: use 10 ~ 13 Channel
\r
21 6: use 1 ~ 14 Channel
\r
22 7: use 3 ~ 9 Channel
\r
24 SSID {0~z, less than 32 characters} Set SoftAP SSID
\r
26 WirelessMode {0~2} Set Wireless Mode
\r
27 0:11b/g mixed, 1:11B only, 2:11g only
\r
29 TxRate {0~12} Set TxRate
\r
30 0:Auto, 1:1Mbps, 2:2Mbps, 3:5.5Mbps, 4:11Mbps,
\r
31 5:6Mbps, 6:9Mbps, 7:12Mbps, 8:18Mbps, 9:24Mbps,
\r
32 10:36Mbps, 11:48Mbps, 12:54Mbps
\r
34 Channel {1~14} depends on country region Set Channel
\r
36 BGProtection {0~2} Set 11B/11G Protection
\r
37 0:Auto, 1:Always on, 2:Always off
\r
39 TxPreamble {0~2} Set TxPreamble
\r
40 0:Preamble Long, 1:Preamble Short, 2:Auto
\r
42 RTSThreshold {1~2347} Set RTS Threshold
\r
44 FragThreshold {256~2346} Set Fragment Threshold
\r
46 TxBurst {0,1} Set TxBurst Enable or Disable
\r
49 TurboRate {0,1} Set TurboRate Enable or Disable
\r
52 AuthMode {OPEN,SHARED,WPAPSK} Set Authentication mode
\r
54 EncrypType {NONE,WEP,TKIP,AES} Set Encryption Type
\r
56 DefaultKeyID {1~4} Set Default Key ID
\r
58 Key1 {5 ascii characters or Set Key1 String
\r
60 13 ascii characters or
\r
63 Key2 {5 ascii characters or Set Key2 String
\r
65 13 ascii characters or
\r
68 Key3 {5 ascii characters or Set Key3 String
\r
70 13 ascii characters or
\r
73 Key4 {5 ascii characters or Set Key4 String
\r
75 13 ascii characters or
\r
79 WPAPSK {8~63 ASCII or 64 HEX characters} WPA Pre-Shared Key
\r