firmware/export/config/gigabeats.h

   1 /*
   2  * This config file is for toshiba Gigabeat S
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 #define TOSHIBA_GIGABEAT_S 1
   8
   9 #define MODEL_NAME "Toshiba Gigabeat S"
  10
  11 /* System source clock frequencies (Hz) */
  12 #define CONFIG_CKIL_FREQ    32768       /* RTC Crystal, Tuner */
  13 #define CONFIG_CKIH_FREQ    27000000    /* PLL Reference */
  14
  15 /* For Rolo and boot loader */
  16 #define MODEL_NUMBER 21
  17
  18 /* define this if you use an ATA controller */
  19 #define CONFIG_STORAGE STORAGE_ATA
  20
  21 /*define this if the ATA controller and method of USB access support LBA48 */
  22 #define HAVE_LBA48
  23
  24 /* define this if you have a bitmap LCD display */
  25 #define HAVE_LCD_BITMAP
  26
  27 /* define this if you have a colour LCD */
  28 #define HAVE_LCD_COLOR
  29
  30 /* define this if you want album art for this target */
  31 #define HAVE_ALBUMART
  32
  33 /* define this to enable bitmap scaling */
  34 #define HAVE_BMP_SCALING
  35
  36 /* define this to enable JPEG decoding */
  37 #define HAVE_JPEG
  38
  39 /* define this if you have access to the quickscreen */
  40 #define HAVE_QUICKSCREEN
  41
  42 /* define this if you have access to the pitchscreen */
  43 #define HAVE_PITCHSCREEN
  44
  45 /* define this if you would like tagcache to build on this target */
  46 #define HAVE_TAGCACHE
  47
  48 /* define this if the target has volume keys which can be used in the lists */
  49 #define HAVE_VOLUME_IN_LIST
  50
  51 /* LCD dimensions */
  52 #define LCD_WIDTH  240
  53 #define LCD_HEIGHT 320
  54 #define LCD_DEPTH  16   /* 65k colours */
  55 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  56
  57 #define CONFIG_KEYPAD GIGABEAT_S_PAD
  58
  59 /* Define this to enable morse code input */
  60 #define HAVE_MORSE_INPUT
  61
  62 /* Define this if you do software codec */
  63 #define CONFIG_CODEC SWCODEC
  64
  65 /* define this if you have a real-time clock */
  66 #define CONFIG_RTC RTC_MC13783
  67
  68 /* Define if the device can wake from an RTC alarm */
  69 #define HAVE_RTC_ALARM
  70
  71 /* Define this for LCD backlight available */
  72 #define HAVE_BACKLIGHT
  73
  74 /* define this if you have a disk storage, i.e. something
  75    that needs spinups and can cause skips when shaked */
  76 #define HAVE_DISK_STORAGE
  77
  78 /* Define this if you have a software controlled poweroff */
  79 #define HAVE_SW_POWEROFF
  80
  81 /* The number of bytes reserved for loadable codecs */
  82 #define CODEC_SIZE 0x100000
  83
  84 /* The number of bytes reserved for loadable plugins */
  85 #define PLUGIN_BUFFER_SIZE 0x80000
  86
  87 /* Define this if you have a SI4700 fm radio tuner */
  88 #define CONFIG_TUNER SI4700
  89
  90 /* Define this if you have the WM8978 audio codec */
  91 #define HAVE_WM8978
  92
  93 /* Tone controls for WM8978 have not been implemented yet */
  94 #define HAVE_SW_TONE_CONTROLS
  95
  96 /* Define bitmask of input sources - recordable bitmask can be defined
  97    explicitly if different */
  98 #define INPUT_SRC_CAPS SRC_CAP_FMRADIO
  99
 100 /* define the bitmask of hardware sample rates */
 101 #define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
 102                        SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
 103                        SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
 104
 105 /* define the bitmask of recording sample rates */
 106 #define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */
 107
 108 /* define default recording levels */
 109 #define DEFAULT_REC_LEFT_GAIN 0
 110 #define DEFAULT_REC_RIGHT_GAIN 0
 111
 112 /* Define this if you have recording capability */
 113 #define HAVE_RECORDING
 114
 115 /* Define this if your LCD can be put to sleep. */
 116 #define HAVE_LCD_SLEEP
 117 /* We don't use a setting but a fixed delay after the backlight has
 118  * turned off */
 119 #define LCD_SLEEP_TIMEOUT (2*HZ)
 120
 121 /* Define this if your LCD can be enabled/disabled */
 122 #define HAVE_LCD_ENABLE
 123
 124 #ifndef BOOTLOADER
 125
 126 #define HAVE_BACKLIGHT_BRIGHTNESS
 127
 128 /* Main LCD backlight brightness range and defaults */
 129 #define MIN_BRIGHTNESS_SETTING          1
 130 #define MAX_BRIGHTNESS_SETTING          24
 131 #define DEFAULT_BRIGHTNESS_SETTING      12
 132
 133 /* Implementation-defined fading type with bool settings */
 134 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET
 135
 136 #define HAVE_HEADPHONE_DETECTION
 137 #endif /* BOOTLOADER */
 138
 139 #define CONFIG_CPU IMX31L
 140
 141 /* Define this if you want to use imx31l's i2c interface */
 142 #define CONFIG_I2C I2C_IMX31L
 143
 144 /* Define the bitmask of modules used */
 145 #define SPI_MODULE_MASK (USE_CSPI2_MODULE)
 146 #define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE)
 147 #define GPIO_EVENT_MASK (USE_GPIO1_EVENTS)
 148
 149 /* Define this if target has an additional number of threads specific to it */
 150 #define TARGET_EXTRA_THREADS 2
 151
 152 /* Type of mobile power - check this out */
 153 #define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */
 154 #define BATTERY_CAPACITY_MIN     700 /* min. capacity selectable */
 155 #define BATTERY_CAPACITY_MAX    1200 /* max. capacity selectable */
 156 #define BATTERY_CAPACITY_INC      25 /* capacity increment */
 157 #define BATTERY_TYPES_COUNT        1 /* only one type */
 158
 159 /* TODO: have a proper status displayed in the bootloader and have it
 160  * work! */
 161 /* Charging implemented in a target-specific algorithm */
 162 #define CONFIG_CHARGING CHARGING_TARGET
 163
 164 /* define this if the hardware can be powered off while charging */
 165 /* We don't charge while powered down so maybe implement a
 166    finish-charging-and-then-poweroff mode */
 167 //#define HAVE_POWEROFF_WHILE_CHARGING
 168
 169 /* The size of the flash ROM */
 170 #define FLASH_SIZE 0x200000
 171
 172 /* Define this to the CPU frequency */
 173 #define CPU_FREQ 264000000 /* Set by retailOS loader */
 174
 175 #define FREQ cpu_frequency
 176
 177 /* define this if the unit can be powered or charged via USB */
 178 #define HAVE_USB_POWER
 179 #define USBPOWER_BUTTON     BUTTON_MENU
 180 #define USBPOWER_BTN_IGNORE BUTTON_POWER
 181
 182 /* define this if the unit has a battery switch or battery can be removed
 183  * when running */
 184 #define HAVE_BATTERY_SWITCH
 185
 186 /* USB On-the-go */
 187 #define CONFIG_USBOTG USBOTG_ARC
 188
 189 /* enable these for the usb stack */
 190 #define USE_ROCKBOX_USB
 191 #define HAVE_USBSTACK
 192 /* usb stack and driver settings */
 193 #define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI
 194 #define USB_VENDOR_ID 0x0930
 195 #define USB_PRODUCT_ID 0x0010
 196 #define HAVE_USB_HID_MOUSE
 197
 198 /* Define this if you have ATA power-off control */
 199 #define HAVE_ATA_POWER_OFF
 200
 201 /* Define this to add support for ATA DMA */
 202 #define HAVE_ATA_DMA
 203
 204 #define CONFIG_LCD LCD_GIGABEAT
 205
 206 /* Offset ( in the firmware file's header ) to the file CRC */
 207 #define FIRMWARE_OFFSET_FILE_CRC 0
 208
 209 /* Offset ( in the firmware file's header ) to the real data */
 210 #define FIRMWARE_OFFSET_FILE_DATA 8
 211
 212 //#define HAVE_SERIAL
 213 #define HAVE_VOLUME_IN_LIST
 214
 215 /*Remove Comments from UART_INT to enable the UART interrupts,*/
 216 /*otherwise iterrupts will be disabled. For now we will test */
 217 /*UART state by polling the registers, and if necessary update this */
 218 /*method by using the interrupts instead*/
 219 //#define UART_INT
 220
 221 /* Define this if you have adjustable CPU frequency */
 222 /* #define HAVE_ADJUSTABLE_CPU_FREQ */
 223
 224 #define HAVE_PCM_DMA_ADDRESS
 225 #define HAVE_PCM_REC_DMA_ADDRESS
 226
 227 #define BOOTFILE_EXT "gigabeat"
 228 #define BOOTFILE "rockbox." BOOTFILE_EXT
 229 #define BOOTDIR "/.rockbox"
 230
 231 /* Define this if a programmable hotkey is mapped */
 232 #define HAVE_HOTKEY