[dragonfly.git] / sys / dev / raid / amr / amr.c

/*-
 * Copyright (c) 1999,2000 Michael Smith
 * Copyright (c) 2000 BSDi
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Copyright (c) 2002 Eric Moore
 * Copyright (c) 2002 LSI Logic Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The party using or redistributing the source code and binary forms
 *    agrees to the disclaimer below and the terms and conditions set forth
 *    herein.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *      $FreeBSD: src/sys/dev/amr/amr.c,v 1.7.2.13 2003/01/15 13:41:18 emoore Exp $
 *      $DragonFly: src/sys/dev/raid/amr/amr.c,v 1.25.4.1 2008/09/16 12:39:45 swildner Exp $
 */

/*
 * Driver for the AMI MegaRaid family of controllers.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>

#include "amr_compat.h"
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/devicestat.h>
#include <sys/disk.h>
#include <sys/stat.h>
#include <sys/rman.h>

#include <bus/pci/pcireg.h>
#include <bus/pci/pcivar.h>

#include "amrio.h"
#include "amrreg.h"
#include "amrvar.h"
#define AMR_DEFINE_TABLES
#include "amr_tables.h"

#define AMR_CDEV_MAJOR  132

static d_open_t         amr_open;
static d_close_t        amr_close;
static d_ioctl_t        amr_ioctl;

static struct dev_ops amr_ops = {
        { "amr", AMR_CDEV_MAJOR, 0 },
        .d_open =       amr_open,
        .d_close =      amr_close,
        .d_ioctl =      amr_ioctl
};

/*
 * Initialisation, bus interface.
 */
static void     amr_startup(void *arg);

/*
 * Command wrappers
 */
static int      amr_query_controller(struct amr_softc *sc);
static void     *amr_enquiry(struct amr_softc *sc, size_t bufsize, 
                             u_int8_t cmd, u_int8_t cmdsub, u_int8_t cmdqual);
static void     amr_completeio(struct amr_command *ac);
static int      amr_support_ext_cdb(struct amr_softc *sc);

/*
 * Command buffer allocation.
 */
static void     amr_alloccmd_cluster(struct amr_softc *sc);
static void     amr_freecmd_cluster(struct amr_command_cluster *acc);

/*
 * Command processing.
 */
static int      amr_bio_command(struct amr_softc *sc, struct amr_command **acp);
static int      amr_wait_command(struct amr_command *ac);
static int      amr_getslot(struct amr_command *ac);
static void     amr_mapcmd(struct amr_command *ac);
static void     amr_unmapcmd(struct amr_command *ac);
static int      amr_start(struct amr_command *ac);
static void     amr_complete(void *context, int pending);

/*
 * Status monitoring
 */
static void     amr_periodic(void *data);

/*
 * Interface-specific shims
 */
static int      amr_quartz_submit_command(struct amr_softc *sc);
static int      amr_quartz_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave);
static int      amr_quartz_poll_command(struct amr_command *ac);

static int      amr_std_submit_command(struct amr_softc *sc);
static int      amr_std_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave);
static int      amr_std_poll_command(struct amr_command *ac);
static void     amr_std_attach_mailbox(struct amr_softc *sc);

#ifdef AMR_BOARD_INIT
static int      amr_quartz_init(struct amr_softc *sc);
static int      amr_std_init(struct amr_softc *sc);
#endif

/*
 * Debugging
 */
static void     amr_describe_controller(struct amr_softc *sc);
#ifdef AMR_DEBUG
#if 0
static void     amr_printcommand(struct amr_command *ac);
#endif
#endif

DECLARE_DUMMY_MODULE(amr);

/********************************************************************************
 ********************************************************************************
                                                                      Inline Glue
 ********************************************************************************
 ********************************************************************************/

/********************************************************************************
 ********************************************************************************
                                                                Public Interfaces
 ********************************************************************************
 ********************************************************************************/

/********************************************************************************
 * Initialise the controller and softc.
 */
int
amr_attach(struct amr_softc *sc)
{

    debug_called(1);

    /*
     * Initialise per-controller queues.
     */
    TAILQ_INIT(&sc->amr_completed);
    TAILQ_INIT(&sc->amr_freecmds);
    TAILQ_INIT(&sc->amr_cmd_clusters);
    TAILQ_INIT(&sc->amr_ready);
    bioq_init(&sc->amr_bioq);

#if defined(__FreeBSD__) && __FreeBSD_version >= 500005
    /*
     * Initialise command-completion task.
     */
    TASK_INIT(&sc->amr_task_complete, 0, amr_complete, sc);
#endif

    debug(2, "queue init done");

    /*
     * Configure for this controller type.
     */
    if (AMR_IS_QUARTZ(sc)) {
        sc->amr_submit_command = amr_quartz_submit_command;
        sc->amr_get_work       = amr_quartz_get_work;
        sc->amr_poll_command   = amr_quartz_poll_command;
    } else {
        sc->amr_submit_command = amr_std_submit_command;
        sc->amr_get_work       = amr_std_get_work;
        sc->amr_poll_command   = amr_std_poll_command;
        amr_std_attach_mailbox(sc);
    }

#ifdef AMR_BOARD_INIT
    if ((AMR_IS_QUARTZ(sc) ? amr_quartz_init(sc) : amr_std_init(sc))))
        return(ENXIO);
#endif

    /*
     * Quiz controller for features and limits.
     */
    if (amr_query_controller(sc))
        return(ENXIO);

    debug(2, "controller query complete");

    /*
     * Attach our 'real' SCSI channels to CAM.
     */
    if (amr_cam_attach(sc))
        return(ENXIO);
    debug(2, "CAM attach done");

    /*
     * Create the control device.
     */
    dev_ops_add(&amr_ops, -1, device_get_unit(sc->amr_dev));
    sc->amr_dev_t = make_dev(&amr_ops, device_get_unit(sc->amr_dev), 
                            UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR,
                            "amr%d", device_get_unit(sc->amr_dev));
    sc->amr_dev_t->si_drv1 = sc;
    reference_dev(sc->amr_dev_t);

    /*
     * Schedule ourselves to bring the controller up once interrupts are
     * available.
     */
    bzero(&sc->amr_ich, sizeof(struct intr_config_hook));
    sc->amr_ich.ich_func = amr_startup;
    sc->amr_ich.ich_arg = sc;
    sc->amr_ich.ich_desc = "amr";
    if (config_intrhook_establish(&sc->amr_ich) != 0) {
        device_printf(sc->amr_dev, "can't establish configuration hook\n");
        return(ENOMEM);
    }

    /*
     * Print a little information about the controller.
     */
    amr_describe_controller(sc);

    debug(2, "attach complete");
    return(0);
}

/********************************************************************************
 * Locate disk resources and attach children to them.
 */
static void
amr_startup(void *arg)
{
    struct amr_softc    *sc = (struct amr_softc *)arg;
    struct amr_logdrive *dr;
    int                 i, error;
    
    debug_called(1);
    callout_init(&sc->amr_timeout);

    /* pull ourselves off the intrhook chain */
    config_intrhook_disestablish(&sc->amr_ich);

    /* get up-to-date drive information */
    if (amr_query_controller(sc)) {
        device_printf(sc->amr_dev, "can't scan controller for drives\n");
        return;
    }

    /* iterate over available drives */
    for (i = 0, dr = &sc->amr_drive[0]; (i < AMR_MAXLD) && (dr->al_size != 0xffffffff); i++, dr++) {
        /* are we already attached to this drive? */
        if (dr->al_disk == 0) {
            /* generate geometry information */
            if (dr->al_size > 0x200000) {       /* extended translation? */
                dr->al_heads = 255;
                dr->al_sectors = 63;
            } else {
                dr->al_heads = 64;
                dr->al_sectors = 32;
            }
            dr->al_cylinders = dr->al_size / (dr->al_heads * dr->al_sectors);
            
            dr->al_disk = device_add_child(sc->amr_dev, NULL, -1);
            if (dr->al_disk == 0)
                device_printf(sc->amr_dev, "device_add_child failed\n");
            device_set_ivars(dr->al_disk, dr);
        }
    }
    
    if ((error = bus_generic_attach(sc->amr_dev)) != 0)
        device_printf(sc->amr_dev, "bus_generic_attach returned %d\n", error);
    
    /* mark controller back up */
    sc->amr_state &= ~AMR_STATE_SHUTDOWN;

    /* interrupts will be enabled before we do anything more */
    sc->amr_state |= AMR_STATE_INTEN;

    /*
     * Start the timeout routine.
     */
/*    callout_reset(&sc->amr_timeout, hz, amr_periodic, sc); */

    return;
}

/*******************************************************************************
 * Free resources associated with a controller instance
 */
void
amr_free(struct amr_softc *sc)
{
    struct amr_command_cluster  *acc;

    /* detach from CAM */
    amr_cam_detach(sc);

    /* cancel status timeout */
    callout_stop(&sc->amr_timeout);
    
    /* throw away any command buffers */
    while ((acc = TAILQ_FIRST(&sc->amr_cmd_clusters)) != NULL) {
        TAILQ_REMOVE(&sc->amr_cmd_clusters, acc, acc_link);
        amr_freecmd_cluster(acc);
    }

    /* destroy control device */
    if( sc->amr_dev_t != (cdev_t)NULL)
            destroy_dev(sc->amr_dev_t);
    dev_ops_remove(&amr_ops, -1, device_get_unit(sc->amr_dev));
}

/*******************************************************************************
 * Receive a bio structure from a child device and queue it on a particular
 * disk resource, then poke the disk resource to start as much work as it can.
 */
int
amr_submit_bio(struct amr_softc *sc, struct bio *bio)
{
    debug_called(2);

    amr_enqueue_bio(sc, bio);
    amr_startio(sc);
    return(0);
}

/********************************************************************************
 * Accept an open operation on the control device.
 */
static int
amr_open(struct dev_open_args *ap)
{
    cdev_t dev = ap->a_head.a_dev;
    int                 unit = minor(dev);
    struct amr_softc    *sc = devclass_get_softc(devclass_find("amr"), unit);

    debug_called(1);

    sc->amr_state |= AMR_STATE_OPEN;
    return(0);
}

/********************************************************************************
 * Accept the last close on the control device.
 */
static int
amr_close(struct dev_close_args *ap)
{
    cdev_t dev = ap->a_head.a_dev;
    int                 unit = minor(dev);
    struct amr_softc    *sc = devclass_get_softc(devclass_find("amr"), unit);

    debug_called(1);

    sc->amr_state &= ~AMR_STATE_OPEN;
    return (0);
}

/********************************************************************************
 * Handle controller-specific control operations.
 */
static int
amr_ioctl(struct dev_ioctl_args *ap)
{
    cdev_t dev = ap->a_head.a_dev;
    struct amr_softc            *sc = (struct amr_softc *)dev->si_drv1;
    int                         *arg = (int *)ap->a_data;
    struct amr_user_ioctl       *au = (struct amr_user_ioctl *)ap->a_data;
    struct amr_command          *ac;
    struct amr_mailbox_ioctl    *mbi;
    struct amr_passthrough      *apt;
    void                        *dp;
    int                         error;

    debug_called(1);

    error = 0;
    dp = NULL;
    apt = NULL;
    ac = NULL;
    switch(ap->a_cmd) {

    case AMR_IO_VERSION:
        debug(1, "AMR_IO_VERSION");
        *arg = AMR_IO_VERSION_NUMBER;
        break;

    case AMR_IO_COMMAND:
        debug(1, "AMR_IO_COMMAND  0x%x", au->au_cmd[0]);
        /* handle inbound data buffer */
        if (au->au_length != 0) {
            dp = kmalloc(au->au_length, M_DEVBUF, M_WAITOK);
            if ((error = copyin(au->au_buffer, dp, au->au_length)) != 0)
                break;
            debug(2, "copyin %ld bytes from %p -> %p", au->au_length, au->au_buffer, dp);
        }

        if ((ac = amr_alloccmd(sc)) == NULL) {
            error = ENOMEM;
            break;
        }

        /* handle SCSI passthrough command */
        if (au->au_cmd[0] == AMR_CMD_PASS) {
            apt = kmalloc(sizeof(*apt), M_DEVBUF, M_WAITOK | M_ZERO);

            /* copy cdb */
            apt->ap_cdb_length = au->au_cmd[2];
            bcopy(&au->au_cmd[3], &apt->ap_cdb[0], apt->ap_cdb_length);

            /* build passthrough */
            apt->ap_timeout             = au->au_cmd[apt->ap_cdb_length + 3] & 0x07;
            apt->ap_ars                 = (au->au_cmd[apt->ap_cdb_length + 3] & 0x08) ? 1 : 0;
            apt->ap_islogical           = (au->au_cmd[apt->ap_cdb_length + 3] & 0x80) ? 1 : 0;
            apt->ap_logical_drive_no    = au->au_cmd[apt->ap_cdb_length + 4];
            apt->ap_channel             = au->au_cmd[apt->ap_cdb_length + 5];
            apt->ap_scsi_id             = au->au_cmd[apt->ap_cdb_length + 6];
            apt->ap_request_sense_length        = 14;
            apt->ap_data_transfer_length = au->au_length;
            /* XXX what about the request-sense area? does the caller want it? */

            /* build command */
            ac->ac_data = apt;
            ac->ac_length = sizeof(*apt);
            ac->ac_flags |= AMR_CMD_DATAOUT;
            ac->ac_ccb_data = dp;
            ac->ac_ccb_length = au->au_length;
            if (au->au_direction & AMR_IO_READ)
                ac->ac_flags |= AMR_CMD_CCB_DATAIN;
            if (au->au_direction & AMR_IO_WRITE)
                ac->ac_flags |= AMR_CMD_CCB_DATAOUT;

            ac->ac_mailbox.mb_command = AMR_CMD_PASS;

        } else {
            /* direct command to controller */
            mbi = (struct amr_mailbox_ioctl *)&ac->ac_mailbox;

            /* copy pertinent mailbox items */
            mbi->mb_command = au->au_cmd[0];
            mbi->mb_channel = au->au_cmd[1];
            mbi->mb_param = au->au_cmd[2];
            mbi->mb_pad[0] = au->au_cmd[3];
            mbi->mb_drive = au->au_cmd[4];

            /* build the command */
            ac->ac_data = dp;
            ac->ac_length = au->au_length;
            if (au->au_direction & AMR_IO_READ)
                ac->ac_flags |= AMR_CMD_DATAIN;
            if (au->au_direction & AMR_IO_WRITE)
                ac->ac_flags |= AMR_CMD_DATAOUT;
        }

        /* run the command */
        if ((error = amr_wait_command(ac)) != 0)
            break;

        /* copy out data and set status */
        if (au->au_length != 0)
            error = copyout(dp, au->au_buffer, au->au_length);
        debug(2, "copyout %ld bytes from %p -> %p", au->au_length, dp, au->au_buffer);
        if (dp != NULL)
            debug(2, "%16d", (int)dp);
        au->au_status = ac->ac_status;
        break;

    default:
        debug(1, "unknown ioctl 0x%lx", cmd);
        error = ENOIOCTL;
        break;
    }

    if (dp != NULL)
        kfree(dp, M_DEVBUF);
    if (apt != NULL)
        kfree(apt, M_DEVBUF);
    if (ac != NULL)
        amr_releasecmd(ac);
    return(error);
}

/********************************************************************************
 ********************************************************************************
                                                                Status Monitoring
 ********************************************************************************
 ********************************************************************************/

/********************************************************************************
 * Perform a periodic check of the controller status
 */
static void
amr_periodic(void *data)
{
    struct amr_softc    *sc = (struct amr_softc *)data;

    debug_called(2);

    /* XXX perform periodic status checks here */

    /* compensate for missed interrupts */
    amr_done(sc);

    /* reschedule */
    callout_reset(&sc->amr_timeout, hz, amr_periodic, sc);
}

/********************************************************************************
 ********************************************************************************
                                                                 Command Wrappers
 ********************************************************************************
 ********************************************************************************/

/********************************************************************************
 * Interrogate the controller for the operational parameters we require.
 */
static int
amr_query_controller(struct amr_softc *sc)
{
    struct amr_enquiry3 *aex;
    struct amr_prodinfo *ap;
    struct amr_enquiry  *ae;
    int                 ldrv;

    /* 
     * If we haven't found the real limit yet, let us have a couple of commands in
     * order to be able to probe.
     */
    if (sc->amr_maxio == 0)
        sc->amr_maxio = 2;

    /*
     * Greater than 10 byte cdb support
     */
    sc->support_ext_cdb = amr_support_ext_cdb(sc);

    if(sc->support_ext_cdb) {
        debug(2,"supports extended CDBs.");
    }

    /* 
     * Try to issue an ENQUIRY3 command 
     */
    if ((aex = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_ENQ3, 
                           AMR_CONFIG_ENQ3_SOLICITED_FULL)) != NULL) {

        /*
         * Fetch current state of logical drives.
         */
        for (ldrv = 0; ldrv < aex->ae_numldrives; ldrv++) {
            sc->amr_drive[ldrv].al_size       = aex->ae_drivesize[ldrv];
            sc->amr_drive[ldrv].al_state      = aex->ae_drivestate[ldrv];
            sc->amr_drive[ldrv].al_properties = aex->ae_driveprop[ldrv];
            debug(2, "  drive %d: %d state %x properties %x\n", ldrv, sc->amr_drive[ldrv].al_size,
                  sc->amr_drive[ldrv].al_state, sc->amr_drive[ldrv].al_properties);
        }
        kfree(aex, M_DEVBUF);

        /*
         * Get product info for channel count.
         */
        if ((ap = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_PRODUCT_INFO, 0)) == NULL) {
            device_printf(sc->amr_dev, "can't obtain product data from controller\n");
            return(1);
        }
        sc->amr_maxdrives = 40;
        sc->amr_maxchan = ap->ap_nschan;
        sc->amr_maxio = ap->ap_maxio;
        sc->amr_type |= AMR_TYPE_40LD;
        kfree(ap, M_DEVBUF);

    } else {

        /* failed, try the 8LD ENQUIRY commands */
        if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_EXT_ENQUIRY2, 0, 0)) == NULL) {
            if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_ENQUIRY, 0, 0)) == NULL) {
                device_printf(sc->amr_dev, "can't obtain configuration data from controller\n");
                return(1);
            }
            ae->ae_signature = 0;
        }

        /*
         * Fetch current state of logical drives.
         */
        for (ldrv = 0; ldrv < ae->ae_ldrv.al_numdrives; ldrv++) {
            sc->amr_drive[ldrv].al_size       = ae->ae_ldrv.al_size[ldrv];
            sc->amr_drive[ldrv].al_state      = ae->ae_ldrv.al_state[ldrv];
            sc->amr_drive[ldrv].al_properties = ae->ae_ldrv.al_properties[ldrv];
            debug(2, "  drive %d: %d state %x properties %x\n", ldrv, sc->amr_drive[ldrv].al_size,
                  sc->amr_drive[ldrv].al_state, sc->amr_drive[ldrv].al_properties);
        }

        sc->amr_maxdrives = 8;
        sc->amr_maxchan = ae->ae_adapter.aa_channels;
        sc->amr_maxio = ae->ae_adapter.aa_maxio;
        kfree(ae, M_DEVBUF);
    }

    /*
     * Mark remaining drives as unused.
     */
    for (; ldrv < AMR_MAXLD; ldrv++)
        sc->amr_drive[ldrv].al_size = 0xffffffff;

    /* 
     * Cap the maximum number of outstanding I/Os.  AMI's Linux driver doesn't trust
     * the controller's reported value, and lockups have been seen when we do.
     */
    sc->amr_maxio = imin(sc->amr_maxio, AMR_LIMITCMD);

    return(0);
}

/********************************************************************************
 * Run a generic enquiry-style command.
 */
static void *
amr_enquiry(struct amr_softc *sc, size_t bufsize, u_int8_t cmd, u_int8_t cmdsub, u_int8_t cmdqual)
{
    struct amr_command  *ac;
    void                *result;
    u_int8_t            *mbox;
    int                 error;

    debug_called(1);

    error = 1;
    result = NULL;
    
    /* get ourselves a command buffer */
    if ((ac = amr_alloccmd(sc)) == NULL)
        goto out;
    /* allocate the response structure */
    result = kmalloc(bufsize, M_DEVBUF, M_INTWAIT);
    /* set command flags */
    ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT;
    
    /* point the command at our data */
    ac->ac_data = result;
    ac->ac_length = bufsize;
    
    /* build the command proper */
    mbox = (u_int8_t *)&ac->ac_mailbox;         /* XXX want a real structure for this? */
    mbox[0] = cmd;
    mbox[2] = cmdsub;
    mbox[3] = cmdqual;

    /* can't assume that interrupts are going to work here, so play it safe */
    if (sc->amr_poll_command(ac))
        goto out;
    error = ac->ac_status;
    
 out:
    if (ac != NULL)
        amr_releasecmd(ac);
    if ((error != 0) && (result != NULL)) {
        kfree(result, M_DEVBUF);
        result = NULL;
    }
    return(result);
}

/********************************************************************************
 * Flush the controller's internal cache, return status.
 */
int
amr_flush(struct amr_softc *sc)
{
    struct amr_command  *ac;
    int                 error;

    /* get ourselves a command buffer */
    error = 1;
    if ((ac = amr_alloccmd(sc)) == NULL)
        goto out;
    /* set command flags */
    ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT;
    
    /* build the command proper */
    ac->ac_mailbox.mb_command = AMR_CMD_FLUSH;

    /* we have to poll, as the system may be going down or otherwise damaged */
    if (sc->amr_poll_command(ac))
        goto out;
    error = ac->ac_status;
    
 out:
    if (ac != NULL)
        amr_releasecmd(ac);
    return(error);
}

/********************************************************************************
 * Detect extented cdb >> greater than 10 byte cdb support
 * returns '1' means this support exist
 * returns '0' means this support doesn't exist
 */
static int
amr_support_ext_cdb(struct amr_softc *sc)
{
    struct amr_command  *ac;
    u_int8_t            *mbox;
    int                 error;

    /* get ourselves a command buffer */
    error = 0;
    if ((ac = amr_alloccmd(sc)) == NULL)
        goto out;
    /* set command flags */
    ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT;

    /* build the command proper */
    mbox = (u_int8_t *)&ac->ac_mailbox;         /* XXX want a real structure for this? */
    mbox[0] = 0xA4;
    mbox[2] = 0x16;


    /* we have to poll, as the system may be going down or otherwise damaged */
    if (sc->amr_poll_command(ac))
        goto out;
    if( ac->ac_status == AMR_STATUS_SUCCESS ) {
            error = 1;
    }

out:
    if (ac != NULL)
        amr_releasecmd(ac);
    return(error);
}

/********************************************************************************
 * Try to find I/O work for the controller from one or more of the work queues.
 *
 * We make the assumption that if the controller is not ready to take a command
 * at some given time, it will generate an interrupt at some later time when
 * it is.
 */
void
amr_startio(struct amr_softc *sc)
{
    struct amr_command  *ac;

    /* spin until something prevents us from doing any work */
    for (;;) {

        /* try to get a ready command */
        ac = amr_dequeue_ready(sc);

        /* if that failed, build a command from a bio */
        if (ac == NULL)
            (void)amr_bio_command(sc, &ac);

        /* if that failed, build a command from a ccb */
        if (ac == NULL)
            (void)amr_cam_command(sc, &ac);

        /* if we don't have anything to do, give up */
        if (ac == NULL)
            break;

        /* try to give the command to the controller; if this fails save it for later and give up */
        if (amr_start(ac)) {
            debug(2, "controller busy, command deferred");
            amr_requeue_ready(ac);      /* XXX schedule retry very soon? */
            break;
        }
    }
}

/********************************************************************************
 * Handle completion of an I/O command.
 */
static void
amr_completeio(struct amr_command *ac)
{
    struct amr_softc    *sc = ac->ac_sc;
    
    if (ac->ac_status != AMR_STATUS_SUCCESS) {  /* could be more verbose here? */
        ac->ac_bio->bio_buf->b_error = EIO;
        ac->ac_bio->bio_buf->b_flags |= B_ERROR;

        device_printf(sc->amr_dev, "I/O error - 0x%x\n", ac->ac_status);
/*      amr_printcommand(ac);*/
    }
    amrd_intr(ac->ac_bio);
    amr_releasecmd(ac);
}

/********************************************************************************
 ********************************************************************************
                                                               Command Processing
 ********************************************************************************
 ********************************************************************************/

/********************************************************************************
 * Convert a bio off the top of the bio queue into a command.
 */
static int
amr_bio_command(struct amr_softc *sc, struct amr_command **acp)
{
    struct amr_command  *ac;
    struct amrd_softc   *amrd;
    struct bio          *bio;
    int                 error;
    int                 blkcount;
    int                 driveno;
    int                 cmd;
    u_int64_t           lba;

    ac = NULL;
    error = 0;

    /* get a bio to work on */
    if ((bio = amr_dequeue_bio(sc)) == NULL)
        goto out;

    /* get a command */
    if ((ac = amr_alloccmd(sc)) == NULL) {
        error = ENOMEM;
        goto out;
    }   
        
    /* connect the bio to the command */
    ac->ac_complete = amr_completeio;
    ac->ac_bio = bio;
    ac->ac_data = bio->bio_buf->b_data;
    ac->ac_length = bio->bio_buf->b_bcount;

    cmd = 0;
    switch(bio->bio_buf->b_cmd) {
    case BUF_CMD_READ:
        ac->ac_flags |= AMR_CMD_DATAIN;
        cmd = AMR_CMD_LREAD;
        break;
    case BUF_CMD_WRITE:
        ac->ac_flags |= AMR_CMD_DATAOUT;
        cmd = AMR_CMD_LWRITE;
        break;
    case BUF_CMD_FLUSH:
        ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT;
        cmd = AMR_CMD_FLUSH;
        break;
    }
    amrd = (struct amrd_softc *)bio->bio_driver_info;
    driveno = amrd->amrd_drive - sc->amr_drive;
    blkcount = (bio->bio_buf->b_bcount + AMR_BLKSIZE - 1) / AMR_BLKSIZE;

    lba = bio->bio_offset / AMR_BLKSIZE;
    KKASSERT(lba < 0x100000000ULL);

    ac->ac_mailbox.mb_command = cmd;
    ac->ac_mailbox.mb_blkcount = blkcount;
    ac->ac_mailbox.mb_lba = lba;
    ac->ac_mailbox.mb_drive = driveno;
    /* we fill in the s/g related data when the command is mapped */

    if ((lba + blkcount) > sc->amr_drive[driveno].al_size)
        device_printf(sc->amr_dev, "I/O beyond end of unit (%lld,%d > %lu)\n", 
                      lba, blkcount,
                      (u_long)sc->amr_drive[driveno].al_size);

out:
    if (error != 0) {
        if (ac != NULL)
            amr_releasecmd(ac);
        if (bio != NULL)                        /* this breaks ordering... */
            amr_enqueue_bio(sc, bio);
    }
    *acp = ac;
    return(error);
}

/********************************************************************************
 * Take a command, submit it to the controller and sleep until it completes
 * or fails.  Interrupts must be enabled, returns nonzero on error.
 */
static int
amr_wait_command(struct amr_command *ac)
{
    int                 error, count;
    
    debug_called(1);

    ac->ac_complete = NULL;
    ac->ac_flags |= AMR_CMD_SLEEP;
    if ((error = amr_start(ac)) != 0)
        return(error);
    
    count = 0;
    /* XXX better timeout? */
    while ((ac->ac_flags & AMR_CMD_BUSY) && (count < 30)) {
        tsleep(ac, PCATCH, "amrwcmd", hz);
    }
    return(0);
}

/********************************************************************************
 * Take a command, submit it to the controller and busy-wait for it to return.
 * Returns nonzero on error.  Can be safely called with interrupts enabled.
 */
static int
amr_std_poll_command(struct amr_command *ac)
{
    struct amr_softc    *sc = ac->ac_sc;
    int                 error, count;

    debug_called(2);

    ac->ac_complete = NULL;
    if ((error = amr_start(ac)) != 0)
        return(error);

    count = 0;
    do {
        /* 
         * Poll for completion, although the interrupt handler may beat us to it. 
         * Note that the timeout here is somewhat arbitrary.
         */
        amr_done(sc);
        DELAY(1000);
    } while ((ac->ac_flags & AMR_CMD_BUSY) && (count++ < 1000));
    if (!(ac->ac_flags & AMR_CMD_BUSY)) {
        error = 0;
    } else {
        /* XXX the slot is now marked permanently busy */
        error = EIO;
        device_printf(sc->amr_dev, "polled command timeout\n");
    }
    return(error);
}

/********************************************************************************
 * Take a command, submit it to the controller and busy-wait for it to return.
 * Returns nonzero on error.  Can be safely called with interrupts enabled.
 */
static int
amr_quartz_poll_command(struct amr_command *ac)
{
    struct amr_softc    *sc = ac->ac_sc;
    int                 error,count;

    debug_called(2);

    /* now we have a slot, we can map the command (unmapped in amr_complete) */
    amr_mapcmd(ac);

    crit_enter();

    if (sc->amr_state & AMR_STATE_INTEN) {
            count=0;
            while (sc->amr_busyslots) {
                    tsleep(sc, PCATCH, "amrpoll", hz);
                    if(count++>10) {
                            break;
                    }
            }
            
            if(sc->amr_busyslots) {
                    device_printf(sc->amr_dev, "adapter is busy\n");
                    crit_exit();
                    amr_unmapcmd(ac);
                    ac->ac_status=0;
                    return(1);
            }
    }

    bcopy(&ac->ac_mailbox, (void *)(uintptr_t)(volatile void *)sc->amr_mailbox, AMR_MBOX_CMDSIZE);

    /* clear the poll/ack fields in the mailbox */
    sc->amr_mailbox->mb_ident = 0xFE;
    sc->amr_mailbox->mb_nstatus = 0xFF;
    sc->amr_mailbox->mb_status = 0xFF;
    sc->amr_mailbox->mb_poll = 0;
    sc->amr_mailbox->mb_ack = 0;
    sc->amr_mailbox->mb_busy = 1;

    AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_SUBMIT);

    while(sc->amr_mailbox->mb_nstatus == 0xFF);
    while(sc->amr_mailbox->mb_status == 0xFF);
    ac->ac_status=sc->amr_mailbox->mb_status;
    error = (ac->ac_status !=AMR_STATUS_SUCCESS) ? 1:0;
    while(sc->amr_mailbox->mb_poll != 0x77);
    sc->amr_mailbox->mb_poll = 0;
    sc->amr_mailbox->mb_ack = 0x77;

    /* acknowledge that we have the commands */
    AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_ACK);
    while(AMR_QGET_IDB(sc) & AMR_QIDB_ACK);

    crit_exit();

    /* unmap the command's data buffer */
    amr_unmapcmd(ac);

    return(error);
}

/********************************************************************************
 * Get a free command slot for a command if it doesn't already have one.
 *
 * May be safely called multiple times for a given command.
 */
static int
amr_getslot(struct amr_command *ac)
{
    struct amr_softc    *sc = ac->ac_sc;
    int                 slot, limit, error;

    debug_called(3);

    /* if the command already has a slot, don't try to give it another one */
    if (ac->ac_slot != 0)
        return(0);

    /* enforce slot usage limit */
    limit = (ac->ac_flags & AMR_CMD_PRIORITY) ? sc->amr_maxio : sc->amr_maxio - 4;
    if (sc->amr_busyslots > limit)
        return(EBUSY);
    
    /*
     * Allocate a slot.  XXX linear scan is slow
     */
    error = EBUSY;
    crit_enter();
    for (slot = 0; slot < sc->amr_maxio; slot++) {
        if (sc->amr_busycmd[slot] == NULL) {
            sc->amr_busycmd[slot] = ac;
            sc->amr_busyslots++;
            ac->ac_slot = slot;
            error = 0;
            break;
        }
    }
    crit_exit();

    return(error);
}

/********************************************************************************
 * Map/unmap (ac)'s data in the controller's addressable space as required.
 *
 * These functions may be safely called multiple times on a given command.
 */
static void
amr_setup_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error)
{
    struct amr_command  *ac = (struct amr_command *)arg;
    struct amr_softc    *sc = ac->ac_sc;
    struct amr_sgentry  *sg;
    int                 i;
    u_int8_t            *sgc;

    debug_called(3);

    /* get base address of s/g table */
    sg = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG);

    /* save data physical address */
    ac->ac_dataphys = segs[0].ds_addr;

    /* for AMR_CMD_CONFIG the s/g count goes elsewhere */
    if (ac->ac_mailbox.mb_command == AMR_CMD_CONFIG) {
        sgc = &(((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_param);
    } else {
        sgc = &ac->ac_mailbox.mb_nsgelem;
    }

    /* decide whether we need to populate the s/g table */
    if (nsegments < 2) {
        *sgc = 0;
        ac->ac_mailbox.mb_nsgelem = 0;
        ac->ac_mailbox.mb_physaddr = ac->ac_dataphys;
    } else {
        ac->ac_mailbox.mb_nsgelem = nsegments;
        *sgc = nsegments;
        ac->ac_mailbox.mb_physaddr = sc->amr_sgbusaddr + (ac->ac_slot * AMR_NSEG * sizeof(struct amr_sgentry));
        for (i = 0; i < nsegments; i++, sg++) {
            sg->sg_addr = segs[i].ds_addr;
            sg->sg_count = segs[i].ds_len;
        }
    }
}

static void
amr_setup_ccbmap(void *arg, bus_dma_segment_t *segs, int nsegments, int error)
{
    struct amr_command          *ac = (struct amr_command *)arg;
    struct amr_softc            *sc = ac->ac_sc;
    struct amr_sgentry          *sg;
    struct amr_passthrough      *ap = (struct amr_passthrough *)ac->ac_data;
    struct amr_ext_passthrough  *aep = (struct amr_ext_passthrough *)ac->ac_data;
    int                         i;

    /* get base address of s/g table */
    sg = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG);

    /* decide whether we need to populate the s/g table */
    if( ac->ac_mailbox.mb_command == AMR_CMD_EXTPASS ) {
        if (nsegments < 2) {
            aep->ap_no_sg_elements = 0;
            aep->ap_data_transfer_address =  segs[0].ds_addr;
        } else {
            /* save s/g table information in passthrough */
            aep->ap_no_sg_elements = nsegments;
            aep->ap_data_transfer_address = sc->amr_sgbusaddr + (ac->ac_slot * AMR_NSEG * sizeof(struct amr_sgentry));
            /* populate s/g table (overwrites previous call which mapped the passthrough) */
            for (i = 0; i < nsegments; i++, sg++) {
                sg->sg_addr = segs[i].ds_addr;
                sg->sg_count = segs[i].ds_len;
                debug(3, " %d: 0x%x/%d", i, sg->sg_addr, sg->sg_count);
            }
        }
        debug(3, "slot %d  %d segments at 0x%x, passthrough at 0x%x", ac->ac_slot,
            aep->ap_no_sg_elements, aep->ap_data_transfer_address, ac->ac_dataphys);
    } else {
        if (nsegments < 2) {
            ap->ap_no_sg_elements = 0;
            ap->ap_data_transfer_address =  segs[0].ds_addr;
        } else {
            /* save s/g table information in passthrough */
            ap->ap_no_sg_elements = nsegments;
            ap->ap_data_transfer_address = sc->amr_sgbusaddr + (ac->ac_slot * AMR_NSEG * sizeof(struct amr_sgentry));
            /* populate s/g table (overwrites previous call which mapped the passthrough) */
            for (i = 0; i < nsegments; i++, sg++) {
                sg->sg_addr = segs[i].ds_addr;
                sg->sg_count = segs[i].ds_len;
                debug(3, " %d: 0x%x/%d", i, sg->sg_addr, sg->sg_count);
            }
        }
        debug(3, "slot %d  %d segments at 0x%x, passthrough at 0x%x", ac->ac_slot,
            ap->ap_no_sg_elements, ap->ap_data_transfer_address, ac->ac_dataphys);
    }
}

static void
amr_mapcmd(struct amr_command *ac)
{
    struct amr_softc    *sc = ac->ac_sc;

    debug_called(3);

    /* if the command involves data at all, and hasn't been mapped */
    if (!(ac->ac_flags & AMR_CMD_MAPPED)) {

        if (ac->ac_data != NULL) {
            /* map the data buffers into bus space and build the s/g list */
            bus_dmamap_load(sc->amr_buffer_dmat, ac->ac_dmamap, ac->ac_data, ac->ac_length,
                            amr_setup_dmamap, ac, 0);
            if (ac->ac_flags & AMR_CMD_DATAIN)
                bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_dmamap, BUS_DMASYNC_PREREAD);
            if (ac->ac_flags & AMR_CMD_DATAOUT)
                bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_dmamap, BUS_DMASYNC_PREWRITE);
        }

        if (ac->ac_ccb_data != NULL) {
            bus_dmamap_load(sc->amr_buffer_dmat, ac->ac_ccb_dmamap, ac->ac_ccb_data, ac->ac_ccb_length,
                            amr_setup_ccbmap, ac, 0);
            if (ac->ac_flags & AMR_CMD_CCB_DATAIN)
                bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_ccb_dmamap, BUS_DMASYNC_PREREAD);
            if (ac->ac_flags & AMR_CMD_CCB_DATAOUT)
                bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_ccb_dmamap, BUS_DMASYNC_PREWRITE);
        }
        ac->ac_flags |= AMR_CMD_MAPPED;
    }
}

static void
amr_unmapcmd(struct amr_command *ac)
{
    struct amr_softc    *sc = ac->ac_sc;

    debug_called(3);

    /* if the command involved data at all and was mapped */
    if (ac->ac_flags & AMR_CMD_MAPPED) {

        if (ac->ac_data != NULL) {
            if (ac->ac_flags & AMR_CMD_DATAIN)
                bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_dmamap, BUS_DMASYNC_POSTREAD);
            if (ac->ac_flags & AMR_CMD_DATAOUT)
                bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_dmamap, BUS_DMASYNC_POSTWRITE);
            bus_dmamap_unload(sc->amr_buffer_dmat, ac->ac_dmamap);
        }

        if (ac->ac_ccb_data != NULL) {
            if (ac->ac_flags & AMR_CMD_CCB_DATAIN)
                bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_ccb_dmamap, BUS_DMASYNC_POSTREAD);
            if (ac->ac_flags & AMR_CMD_CCB_DATAOUT)
                bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_ccb_dmamap, BUS_DMASYNC_POSTWRITE);
            bus_dmamap_unload(sc->amr_buffer_dmat, ac->ac_ccb_dmamap);
        }
        ac->ac_flags &= ~AMR_CMD_MAPPED;
    }
}

/********************************************************************************
 * Take a command and give it to the controller, returns 0 if successful, or
 * EBUSY if the command should be retried later.
 */
static int
amr_start(struct amr_command *ac)
{
    struct amr_softc    *sc = ac->ac_sc;
    int                 done, i;

    debug_called(3);

    /* mark command as busy so that polling consumer can tell */
    ac->ac_flags |= AMR_CMD_BUSY;

    /* get a command slot (freed in amr_done) */
    if (amr_getslot(ac))
        return(EBUSY);

    /* now we have a slot, we can map the command (unmapped in amr_complete) */
    amr_mapcmd(ac);

    /* mark the new mailbox we are going to copy in as busy */
    ac->ac_mailbox.mb_busy = 1;

    /* clear the poll/ack fields in the mailbox */
    sc->amr_mailbox->mb_poll = 0;
    sc->amr_mailbox->mb_ack = 0;

    /* 
     * Save the slot number so that we can locate this command when complete.
     * Note that ident = 0 seems to be special, so we don't use it.
     */
    ac->ac_mailbox.mb_ident = ac->ac_slot + 1;

    /* 
     * Spin waiting for the mailbox, give up after ~1 second.  We expect the
     * controller to be able to handle our I/O.
     *
     * XXX perhaps we should wait for less time, and count on the deferred command
     * handling to deal with retries?
     */
    debug(4, "wait for mailbox");
    for (i = 10000, done = 0; (i > 0) && !done; i--) {
        crit_enter();
        
        /* is the mailbox free? */
        if (sc->amr_mailbox->mb_busy == 0) {
            debug(4, "got mailbox");
            sc->amr_mailbox64->mb64_segment = 0;
            bcopy(&ac->ac_mailbox, (void *)(uintptr_t)(volatile void *)sc->amr_mailbox, AMR_MBOX_CMDSIZE);
            done = 1;

            /* not free, spin waiting */
        } else {
            debug(4, "busy flag %x\n", sc->amr_mailbox->mb_busy);
            /* this is somewhat ugly */
            DELAY(100);
        }
        crit_exit();
    }

    /*
     * Now give the command to the controller
     */
    if (done) {
        if (sc->amr_submit_command(sc)) {
            /* the controller wasn't ready to take the command, forget that we tried to post it */
            sc->amr_mailbox->mb_busy = 0;
            return(EBUSY);
        }
        debug(3, "posted command");
        return(0);
    }
    
    /*
     * The controller wouldn't take the command.  Return the command as busy
     * so that it is retried later.
     */
    return(EBUSY);
}

/********************************************************************************
 * Extract one or more completed commands from the controller (sc)
 *
 * Returns nonzero if any commands on the work queue were marked as completed.
 */
int
amr_done(struct amr_softc *sc)
{
    struct amr_command  *ac;
    struct amr_mailbox  mbox;
    int                 i, idx, result;
    
    debug_called(3);

    /* See if there's anything for us to do */
    result = 0;

    /* loop collecting completed commands */
    for (;;) {
        /* poll for a completed command's identifier and status */
        if (sc->amr_get_work(sc, &mbox)) {
            result = 1;
            
            /* iterate over completed commands in this result */
            for (i = 0; i < mbox.mb_nstatus; i++) {
                /* get pointer to busy command */
                idx = mbox.mb_completed[i] - 1;
                ac = sc->amr_busycmd[idx];

                /* really a busy command? */
                if (ac != NULL) {

                    /* pull the command from the busy index */
                    sc->amr_busycmd[idx] = NULL;
                    sc->amr_busyslots--;
                
                    /* save status for later use */
                    ac->ac_status = mbox.mb_status;
                    amr_enqueue_completed(ac);
                    debug(3, "completed command with status %x", mbox.mb_status);
                } else {
                    device_printf(sc->amr_dev, "bad slot %d completed\n", idx);
                }
            }
        } else {
            break;      /* no work */
        }
    }
    
    /* if we've completed any commands, try posting some more */
    if (result)
        amr_startio(sc);
    
    /* handle completion and timeouts */
#if defined(__FreeBSD__) && __FreeBSD_version >= 500005
    if (sc->amr_state & AMR_STATE_INTEN) 
        taskqueue_enqueue(taskqueue_swi, &sc->amr_task_complete);
    else
#endif
        amr_complete(sc, 0);
    
    return(result);
}

/********************************************************************************
 * Do completion processing on done commands on (sc)
 */
static void
amr_complete(void *context, int pending)
{
    struct amr_softc    *sc = (struct amr_softc *)context;
    struct amr_command  *ac;

    debug_called(3);

    /* pull completed commands off the queue */
    for (;;) {
        ac = amr_dequeue_completed(sc);
        if (ac == NULL)
            break;

        /* unmap the command's data buffer */
        amr_unmapcmd(ac);

        /* unbusy the command */
        ac->ac_flags &= ~AMR_CMD_BUSY;
            
        /* 
         * Is there a completion handler? 
         */
        if (ac->ac_complete != NULL) {
            ac->ac_complete(ac);
            
            /* 
             * Is someone sleeping on this one?
             */
        } else if (ac->ac_flags & AMR_CMD_SLEEP) {
            wakeup(ac);
        }

        if(!sc->amr_busyslots) {
            wakeup(sc);
        }
    }
}

/********************************************************************************
 ********************************************************************************
                                                        Command Buffer Management
 ********************************************************************************
 ********************************************************************************/

/********************************************************************************
 * Get a new command buffer.
 *
 * This may return NULL in low-memory cases.
 *
 * If possible, we recycle a command buffer that's been used before.
 */
struct amr_command *
amr_alloccmd(struct amr_softc *sc)
{
    struct amr_command  *ac;

    debug_called(3);

    ac = amr_dequeue_free(sc);
    if (ac == NULL) {
        amr_alloccmd_cluster(sc);
        ac = amr_dequeue_free(sc);
    }
    if (ac == NULL)
        return(NULL);

    /* clear out significant fields */
    ac->ac_slot = 0;
    ac->ac_status = 0;
    bzero(&ac->ac_mailbox, sizeof(struct amr_mailbox));
    ac->ac_flags = 0;
    ac->ac_bio = NULL;
    ac->ac_data = NULL;
    ac->ac_ccb_data = NULL;
    ac->ac_complete = NULL;
    return(ac);
}

/********************************************************************************
 * Release a command buffer for recycling.
 */
void
amr_releasecmd(struct amr_command *ac)
{
    debug_called(3);

    amr_enqueue_free(ac);
}

/********************************************************************************
 * Allocate a new command cluster and initialise it.
 */
static void
amr_alloccmd_cluster(struct amr_softc *sc)
{
    struct amr_command_cluster  *acc;
    struct amr_command          *ac;
    int                         i;

    acc = kmalloc(AMR_CMD_CLUSTERSIZE, M_DEVBUF, M_INTWAIT);
    crit_enter();
    TAILQ_INSERT_TAIL(&sc->amr_cmd_clusters, acc, acc_link);
    crit_exit();
    for (i = 0; i < AMR_CMD_CLUSTERCOUNT; i++) {
        ac = &acc->acc_command[i];
        bzero(ac, sizeof(*ac));
        ac->ac_sc = sc;
        if (!bus_dmamap_create(sc->amr_buffer_dmat, 0, &ac->ac_dmamap) &&
            !bus_dmamap_create(sc->amr_buffer_dmat, 0, &ac->ac_ccb_dmamap))
            amr_releasecmd(ac);
    }
}

/********************************************************************************
 * Free a command cluster
 */
static void
amr_freecmd_cluster(struct amr_command_cluster *acc)
{
    struct amr_softc    *sc = acc->acc_command[0].ac_sc;
    int                 i;

    for (i = 0; i < AMR_CMD_CLUSTERCOUNT; i++)
        bus_dmamap_destroy(sc->amr_buffer_dmat, acc->acc_command[i].ac_dmamap);
    kfree(acc, M_DEVBUF);
}

/********************************************************************************
 ********************************************************************************
                                                         Interface-specific Shims
 ********************************************************************************
 ********************************************************************************/

/********************************************************************************
 * Tell the controller that the mailbox contains a valid command
 */
static int
amr_quartz_submit_command(struct amr_softc *sc)
{
    debug_called(3);

    if (AMR_QGET_IDB(sc) & AMR_QIDB_SUBMIT)
        return(EBUSY);
    AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_SUBMIT);
    return(0);
}

static int
amr_std_submit_command(struct amr_softc *sc)
{
    debug_called(3);

    if (AMR_SGET_MBSTAT(sc) & AMR_SMBOX_BUSYFLAG)
        return(EBUSY);
    AMR_SPOST_COMMAND(sc);
    return(0);
}

/********************************************************************************
 * Claim any work that the controller has completed; acknowledge completion,
 * save details of the completion in (mbsave)
 */
static int
amr_quartz_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave)
{
    int         worked;
    u_int32_t   outd;

    debug_called(3);

    worked = 0;
    crit_enter();

    /* work waiting for us? */
    if ((outd = AMR_QGET_ODB(sc)) == AMR_QODB_READY) {

        /* save mailbox, which contains a list of completed commands */
        bcopy((void *)(uintptr_t)(volatile void *)sc->amr_mailbox, mbsave, sizeof(*mbsave));

        /* acknowledge interrupt */
        AMR_QPUT_ODB(sc, AMR_QODB_READY);

        /* acknowledge that we have the commands */
        AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_ACK);

#ifndef AMR_QUARTZ_GOFASTER
        /*
         * This waits for the controller to notice that we've taken the
         * command from it.  It's very inefficient, and we shouldn't do it,
         * but if we remove this code, we stop completing commands under
         * load.
         *
         * Peter J says we shouldn't do this.  The documentation says we
         * should.  Who is right?
         */
        while(AMR_QGET_IDB(sc) & AMR_QIDB_ACK)
            ;                           /* XXX aiee! what if it dies? */
#endif

        worked = 1;                     /* got some work */
    }

    crit_exit();
    return(worked);
}

static int
amr_std_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave)
{
    int         worked;
    u_int8_t    istat;

    debug_called(3);

    worked = 0;
    crit_enter();

    /* check for valid interrupt status */
    istat = AMR_SGET_ISTAT(sc);
    if ((istat & AMR_SINTR_VALID) != 0) {
        AMR_SPUT_ISTAT(sc, istat);      /* ack interrupt status */

        /* save mailbox, which contains a list of completed commands */
        bcopy((void *)(uintptr_t)(volatile void *)sc->amr_mailbox, mbsave, sizeof(*mbsave));

        AMR_SACK_INTERRUPT(sc);         /* acknowledge we have the mailbox */
        worked = 1;
    }

    crit_exit();
    return(worked);
}

/********************************************************************************
 * Notify the controller of the mailbox location.
 */
static void
amr_std_attach_mailbox(struct amr_softc *sc)
{

    /* program the mailbox physical address */
    AMR_SBYTE_SET(sc, AMR_SMBOX_0, sc->amr_mailboxphys         & 0xff);
    AMR_SBYTE_SET(sc, AMR_SMBOX_1, (sc->amr_mailboxphys >>  8) & 0xff);
    AMR_SBYTE_SET(sc, AMR_SMBOX_2, (sc->amr_mailboxphys >> 16) & 0xff);
    AMR_SBYTE_SET(sc, AMR_SMBOX_3, (sc->amr_mailboxphys >> 24) & 0xff);
    AMR_SBYTE_SET(sc, AMR_SMBOX_ENABLE, AMR_SMBOX_ADDR);

    /* clear any outstanding interrupt and enable interrupts proper */
    AMR_SACK_INTERRUPT(sc);
    AMR_SENABLE_INTR(sc);
}

#ifdef AMR_BOARD_INIT
/********************************************************************************
 * Initialise the controller
 */
static int
amr_quartz_init(struct amr_softc *sc)
{
    int         status, ostatus;

    device_printf(sc->amr_dev, "initial init status %x\n", AMR_QGET_INITSTATUS(sc));

    AMR_QRESET(sc);

    ostatus = 0xff;
    while ((status = AMR_QGET_INITSTATUS(sc)) != AMR_QINIT_DONE) {
        if (status != ostatus) {
            device_printf(sc->amr_dev, "(%x) %s\n", status, amr_describe_code(amr_table_qinit, status));
            ostatus = status;
        }
        switch (status) {
        case AMR_QINIT_NOMEM:
            return(ENOMEM);

        case AMR_QINIT_SCAN:
            /* XXX we could print channel/target here */
            break;
        }
    }
    return(0);
}

static int
amr_std_init(struct amr_softc *sc)
{
    int         status, ostatus;

    device_printf(sc->amr_dev, "initial init status %x\n", AMR_SGET_INITSTATUS(sc));

    AMR_SRESET(sc);
 
    ostatus = 0xff;
    while ((status = AMR_SGET_INITSTATUS(sc)) != AMR_SINIT_DONE) {
        if (status != ostatus) {
            device_printf(sc->amr_dev, "(%x) %s\n", status, amr_describe_code(amr_table_sinit, status));
            ostatus = status;
        }
        switch (status) {
        case AMR_SINIT_NOMEM:
            return(ENOMEM);

        case AMR_SINIT_INPROG:
            /* XXX we could print channel/target here? */
            break;
        }
    }
    return(0);
}
#endif

/********************************************************************************
 ********************************************************************************
                                                                        Debugging
 ********************************************************************************
 ********************************************************************************/

/********************************************************************************
 * Identify the controller and print some information about it.
 */
static void
amr_describe_controller(struct amr_softc *sc)
{
    struct amr_prodinfo *ap;
    struct amr_enquiry  *ae;
    char                *prod;

    /*
     * Try to get 40LD product info, which tells us what the card is labelled as.
     */
    if ((ap = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_PRODUCT_INFO, 0)) != NULL) {
        device_printf(sc->amr_dev, "<LSILogic %.80s> Firmware %.16s, BIOS %.16s, %dMB RAM\n",
                      ap->ap_product, ap->ap_firmware, ap->ap_bios,
                      ap->ap_memsize);

        kfree(ap, M_DEVBUF);
        return;
    }

    /*
     * Try 8LD extended ENQUIRY to get controller signature, and use lookup table.
     */
    if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_EXT_ENQUIRY2, 0, 0)) != NULL) {
        prod = amr_describe_code(amr_table_adaptertype, ae->ae_signature);

    } else if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_ENQUIRY, 0, 0)) != NULL) {

        /*
         * Try to work it out based on the PCI signatures.
         */
        switch (pci_get_device(sc->amr_dev)) {
        case 0x9010:
            prod = "Series 428";
            break;
        case 0x9060:
            prod = "Series 434";
            break;
        default:
            prod = "unknown controller";
            break;
        }
    } else {
        device_printf(sc->amr_dev, "<unsupported controller>\n");
        return;
    }

    /*
     * HP NetRaid controllers have a special encoding of the firmware and
     * BIOS versions. The AMI version seems to have it as strings whereas
     * the HP version does it with a leading uppercase character and two
     * binary numbers.
     */
     
    if(ae->ae_adapter.aa_firmware[2] >= 'A' &&
       ae->ae_adapter.aa_firmware[2] <= 'Z' &&
       ae->ae_adapter.aa_firmware[1] <  ' ' &&
       ae->ae_adapter.aa_firmware[0] <  ' ' &&
       ae->ae_adapter.aa_bios[2] >= 'A'     &&
       ae->ae_adapter.aa_bios[2] <= 'Z'     &&
       ae->ae_adapter.aa_bios[1] <  ' '     &&
       ae->ae_adapter.aa_bios[0] <  ' ') {

        /* this looks like we have an HP NetRaid version of the MegaRaid */

        if(ae->ae_signature == AMR_SIG_438) {
                /* the AMI 438 is a NetRaid 3si in HP-land */
                prod = "HP NetRaid 3si";
        }
        
        device_printf(sc->amr_dev, "<%s> Firmware %c.%02d.%02d, BIOS %c.%02d.%02d, %dMB RAM\n",
                      prod, ae->ae_adapter.aa_firmware[2],
                      ae->ae_adapter.aa_firmware[1],
                      ae->ae_adapter.aa_firmware[0],
                      ae->ae_adapter.aa_bios[2],
                      ae->ae_adapter.aa_bios[1],
                      ae->ae_adapter.aa_bios[0],
                      ae->ae_adapter.aa_memorysize);            
    } else {
        device_printf(sc->amr_dev, "<%s> Firmware %.4s, BIOS %.4s, %dMB RAM\n", 
                      prod, ae->ae_adapter.aa_firmware, ae->ae_adapter.aa_bios,
                      ae->ae_adapter.aa_memorysize);
    }           
    kfree(ae, M_DEVBUF);
}

int
amr_dump_blocks(struct amr_softc *sc, int unit, u_int64_t lba, void *data, int blks)
{

    struct amr_command  *ac;
    int                 error = 1;

    debug_called(1);

    sc->amr_state &= ~AMR_STATE_INTEN;

    /* get ourselves a command buffer */
    if ((ac = amr_alloccmd(sc)) == NULL)
        goto out;
    /* set command flags */
    ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT;
    
    /* point the command at our data */
    ac->ac_data = data;
    ac->ac_length = blks * AMR_BLKSIZE;
    
    /* build the command proper */
    ac->ac_mailbox.mb_command   = AMR_CMD_LWRITE;
    ac->ac_mailbox.mb_blkcount  = blks;
    ac->ac_mailbox.mb_lba       = lba;
    ac->ac_mailbox.mb_drive     = unit;
        
    /* can't assume that interrupts are going to work here, so play it safe */
    if (sc->amr_poll_command(ac))
        goto out;
    error = ac->ac_status;
    
 out:
    if (ac != NULL)
        amr_releasecmd(ac);

    sc->amr_state |= AMR_STATE_INTEN;

    return (error);     
}


#ifdef AMR_DEBUG
/********************************************************************************
 * Print the command (ac) in human-readable format
 */
#if 0
static void
amr_printcommand(struct amr_command *ac)
{
    struct amr_softc    *sc = ac->ac_sc;
    struct amr_sgentry  *sg;
    int                 i;
    
    device_printf(sc->amr_dev, "cmd %x  ident %d  drive %d\n",
                  ac->ac_mailbox.mb_command, ac->ac_mailbox.mb_ident, ac->ac_mailbox.mb_drive);
    device_printf(sc->amr_dev, "blkcount %d  lba %d\n", 
                  ac->ac_mailbox.mb_blkcount, ac->ac_mailbox.mb_lba);
    device_printf(sc->amr_dev, "virtaddr %p  length %lu\n", ac->ac_data, (unsigned long)ac->ac_length);
    device_printf(sc->amr_dev, "sg physaddr %08x  nsg %d\n",
                  ac->ac_mailbox.mb_physaddr, ac->ac_mailbox.mb_nsgelem);
    device_printf(sc->amr_dev, "ccb %p  bio %p\n", ac->ac_ccb_data, ac->ac_bio);

    /* get base address of s/g table */
    sg = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG);
    for (i = 0; i < ac->ac_mailbox.mb_nsgelem; i++, sg++)
        device_printf(sc->amr_dev, "  %x/%d\n", sg->sg_addr, sg->sg_count);
}
#endif
#endif