common/cmd_mii.c

   1 /*
   2  * (C) Copyright 2001
   3  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * MII Utilities
  26  */
  27
  28 #include <common.h>
  29 #include <command.h>
  30 #include <miiphy.h>
  31
  32 typedef struct _MII_reg_desc_t {
  33         ushort regno;
  34         char * name;
  35 } MII_reg_desc_t;
  36
  37 MII_reg_desc_t reg_0_5_desc_tbl[] = {
  38         { 0,   "PHY control register"                },
  39         { 1,   "PHY status register"                 },
  40         { 2,   "PHY ID 1 register"                   },
  41         { 3,   "PHY ID 2 register"                   },
  42         { 4,   "Autonegotiation advertisement register" },
  43         { 5,   "Autonegotiation partner abilities register" },
  44 };
  45
  46 typedef struct _MII_field_desc_t {
  47         ushort hi;
  48         ushort lo;
  49         ushort mask;
  50         char * name;
  51 } MII_field_desc_t;
  52
  53 MII_field_desc_t reg_0_desc_tbl[] = {
  54         { 15, 15, 0x01, "reset"                        },
  55         { 14, 14, 0x01, "loopback"                     },
  56         { 13,  6, 0x81, "speed selection"              }, /* special */
  57         { 12, 12, 0x01, "A/N enable"                   },
  58         { 11, 11, 0x01, "power-down"                   },
  59         { 10, 10, 0x01, "isolate"                      },
  60         {  9,  9, 0x01, "restart A/N"                  },
  61         {  8,  8, 0x01, "duplex"                       }, /* special */
  62         {  7,  7, 0x01, "collision test enable"        },
  63         {  5,  0, 0x3f, "(reserved)"                   }
  64 };
  65
  66 MII_field_desc_t reg_1_desc_tbl[] = {
  67         { 15, 15, 0x01, "100BASE-T4 able"              },
  68         { 14, 14, 0x01, "100BASE-X  full duplex able"  },
  69         { 13, 13, 0x01, "100BASE-X  half duplex able"  },
  70         { 12, 12, 0x01, "10 Mbps    full duplex able"  },
  71         { 11, 11, 0x01, "10 Mbps    half duplex able"  },
  72         { 10, 10, 0x01, "100BASE-T2 full duplex able"  },
  73         {  9,  9, 0x01, "100BASE-T2 half duplex able"  },
  74         {  8,  8, 0x01, "extended status"              },
  75         {  7,  7, 0x01, "(reserved)"                   },
  76         {  6,  6, 0x01, "MF preamble suppression"      },
  77         {  5,  5, 0x01, "A/N complete"                 },
  78         {  4,  4, 0x01, "remote fault"                 },
  79         {  3,  3, 0x01, "A/N able"                     },
  80         {  2,  2, 0x01, "link status"                  },
  81         {  1,  1, 0x01, "jabber detect"                },
  82         {  0,  0, 0x01, "extended capabilities"        },
  83 };
  84
  85 MII_field_desc_t reg_2_desc_tbl[] = {
  86         { 15,  0, 0xffff, "OUI portion"                },
  87 };
  88
  89 MII_field_desc_t reg_3_desc_tbl[] = {
  90         { 15, 10, 0x3f, "OUI portion"                },
  91         {  9,  4, 0x3f, "manufacturer part number"   },
  92         {  3,  0, 0x0f, "manufacturer rev. number"   },
  93 };
  94
  95 MII_field_desc_t reg_4_desc_tbl[] = {
  96         { 15, 15, 0x01, "next page able"               },
  97         { 14, 14, 0x01, "reserved"                     },
  98         { 13, 13, 0x01, "remote fault"                 },
  99         { 12, 12, 0x01, "reserved"                     },
 100         { 11, 11, 0x01, "asymmetric pause"             },
 101         { 10, 10, 0x01, "pause enable"                 },
 102         {  9,  9, 0x01, "100BASE-T4 able"              },
 103         {  8,  8, 0x01, "100BASE-TX full duplex able"  },
 104         {  7,  7, 0x01, "100BASE-TX able"              },
 105         {  6,  6, 0x01, "10BASE-T   full duplex able"  },
 106         {  5,  5, 0x01, "10BASE-T   able"              },
 107         {  4,  0, 0x1f, "xxx to do"                    },
 108 };
 109
 110 MII_field_desc_t reg_5_desc_tbl[] = {
 111         { 15, 15, 0x01, "next page able"               },
 112         { 14, 14, 0x01, "acknowledge"                  },
 113         { 13, 13, 0x01, "remote fault"                 },
 114         { 12, 12, 0x01, "(reserved)"                   },
 115         { 11, 11, 0x01, "asymmetric pause able"        },
 116         { 10, 10, 0x01, "pause able"                   },
 117         {  9,  9, 0x01, "100BASE-T4 able"              },
 118         {  8,  8, 0x01, "100BASE-X full duplex able"   },
 119         {  7,  7, 0x01, "100BASE-TX able"              },
 120         {  6,  6, 0x01, "10BASE-T full duplex able"    },
 121         {  5,  5, 0x01, "10BASE-T able"                },
 122         {  4,  0, 0x1f, "xxx to do"                    },
 123 };
 124
 125 #define DESC0LEN (sizeof(reg_0_desc_tbl)/sizeof(reg_0_desc_tbl[0]))
 126 #define DESC1LEN (sizeof(reg_1_desc_tbl)/sizeof(reg_1_desc_tbl[0]))
 127 #define DESC2LEN (sizeof(reg_2_desc_tbl)/sizeof(reg_2_desc_tbl[0]))
 128 #define DESC3LEN (sizeof(reg_3_desc_tbl)/sizeof(reg_3_desc_tbl[0]))
 129 #define DESC4LEN (sizeof(reg_4_desc_tbl)/sizeof(reg_4_desc_tbl[0]))
 130 #define DESC5LEN (sizeof(reg_5_desc_tbl)/sizeof(reg_5_desc_tbl[0]))
 131
 132 typedef struct _MII_field_desc_and_len_t {
 133         MII_field_desc_t * pdesc;
 134         ushort len;
 135 } MII_field_desc_and_len_t;
 136
 137 MII_field_desc_and_len_t desc_and_len_tbl[] = {
 138         { reg_0_desc_tbl, DESC0LEN },
 139         { reg_1_desc_tbl, DESC1LEN },
 140         { reg_2_desc_tbl, DESC2LEN },
 141         { reg_3_desc_tbl, DESC3LEN },
 142         { reg_4_desc_tbl, DESC4LEN },
 143         { reg_5_desc_tbl, DESC5LEN },
 144 };
 145
 146 static void dump_reg(
 147         ushort             regval,
 148         MII_reg_desc_t   * prd,
 149         MII_field_desc_and_len_t * pdl);
 150
 151 static int special_field(
 152         ushort regno,
 153         MII_field_desc_t * pdesc,
 154         ushort regval);
 155
 156 void MII_dump_0_to_5(
 157         ushort regvals[6],
 158         uchar reglo,
 159         uchar reghi)
 160 {
 161         ulong i;
 162
 163         for (i = 0; i < 6; i++) {
 164                 if ((reglo <= i) && (i <= reghi))
 165                         dump_reg(regvals[i], &reg_0_5_desc_tbl[i],
 166                                 &desc_and_len_tbl[i]);
 167         }
 168 }
 169
 170 static void dump_reg(
 171         ushort             regval,
 172         MII_reg_desc_t   * prd,
 173         MII_field_desc_and_len_t * pdl)
 174 {
 175         ulong i;
 176         ushort mask_in_place;
 177         MII_field_desc_t * pdesc;
 178
 179         printf("%u.     (%04hx)                 -- %s --\n",
 180                 prd->regno, regval, prd->name);
 181
 182         for (i = 0; i < pdl->len; i++) {
 183                 pdesc = &pdl->pdesc[i];
 184
 185                 mask_in_place = pdesc->mask << pdesc->lo;
 186
 187                 printf("  (%04hx:%04hx) %u.",
 188                         mask_in_place,
 189                         regval & mask_in_place,
 190                         prd->regno);
 191
 192                 if (special_field(prd->regno, pdesc, regval)) {
 193                 }
 194                 else {
 195                         if (pdesc->hi == pdesc->lo)
 196                                 printf("%2u   ", pdesc->lo);
 197                         else
 198                                 printf("%2u-%2u", pdesc->hi, pdesc->lo);
 199                         printf(" = %5u    %s",
 200                                 (regval & mask_in_place) >> pdesc->lo,
 201                                 pdesc->name);
 202                 }
 203                 printf("\n");
 204
 205         }
 206         printf("\n");
 207 }
 208
 209 /* Special fields:
 210 ** 0.6,13
 211 ** 0.8
 212 ** 2.15-0
 213 ** 3.15-0
 214 ** 4.4-0
 215 ** 5.4-0
 216 */
 217
 218 static int special_field(
 219         ushort regno,
 220         MII_field_desc_t * pdesc,
 221         ushort regval)
 222 {
 223         if ((regno == 0) && (pdesc->lo == 6)) {
 224                 ushort speed_bits = regval & PHY_BMCR_SPEED_MASK;
 225                 printf("%2u,%2u =   b%u%u    speed selection = %s Mbps",
 226                         6, 13,
 227                         (regval >>  6) & 1,
 228                         (regval >> 13) & 1,
 229                         speed_bits == PHY_BMCR_1000_MBPS ? "1000" :
 230                         speed_bits == PHY_BMCR_100_MBPS  ? "100" :
 231                         speed_bits == PHY_BMCR_10_MBPS   ? "10" :
 232                         "???");
 233                 return 1;
 234         }
 235
 236         else if ((regno == 0) && (pdesc->lo == 8)) {
 237                 printf("%2u    = %5u    duplex = %s",
 238                         pdesc->lo,
 239                         (regval >>  pdesc->lo) & 1,
 240                         ((regval >> pdesc->lo) & 1) ? "full" : "half");
 241                 return 1;
 242         }
 243
 244         else if ((regno == 4) && (pdesc->lo == 0)) {
 245                 ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
 246                 printf("%2u-%2u = %5u    selector = %s",
 247                         pdesc->hi, pdesc->lo, sel_bits,
 248                         sel_bits == PHY_ANLPAR_PSB_802_3 ?
 249                                 "IEEE 802.3" :
 250                         sel_bits == PHY_ANLPAR_PSB_802_9 ?
 251                                 "IEEE 802.9 ISLAN-16T" :
 252                         "???");
 253                 return 1;
 254         }
 255
 256         else if ((regno == 5) && (pdesc->lo == 0)) {
 257                 ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
 258                 printf("%2u-%2u =     %u    selector = %s",
 259                         pdesc->hi, pdesc->lo, sel_bits,
 260                         sel_bits == PHY_ANLPAR_PSB_802_3 ?
 261                                 "IEEE 802.3" :
 262                         sel_bits == PHY_ANLPAR_PSB_802_9 ?
 263                                 "IEEE 802.9 ISLAN-16T" :
 264                         "???");
 265                 return 1;
 266         }
 267
 268         return 0;
 269 }
 270
 271 char last_op[2];
 272 uint last_data;
 273 uint last_addr_lo;
 274 uint last_addr_hi;
 275 uint last_reg_lo;
 276 uint last_reg_hi;
 277
 278 static void extract_range(
 279         char * input,
 280         unsigned char * plo,
 281         unsigned char * phi)
 282 {
 283         char * end;
 284         *plo = simple_strtoul(input, &end, 16);
 285         if (*end == '-') {
 286                 end++;
 287                 *phi = simple_strtoul(end, NULL, 16);
 288         }
 289         else {
 290                 *phi = *plo;
 291         }
 292 }
 293
 294 /* ---------------------------------------------------------------- */
 295 int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 296 {
 297         char            op[2];
 298         unsigned char   addrlo, addrhi, reglo, reghi;
 299         unsigned char   addr, reg;
 300         unsigned short  data;
 301         int             rcode = 0;
 302         char            *devname;
 303
 304         if (argc < 2) {
 305                 printf("Usage:\n%s\n", cmdtp->usage);
 306                 return 1;
 307         }
 308
 309 #if defined(CONFIG_8xx) || defined(CONFIG_MCF532x) || defined(CONFIG_MII_INIT)
 310         mii_init ();
 311 #endif
 312
 313         /*
 314          * We use the last specified parameters, unless new ones are
 315          * entered.
 316          */
 317         op[0] = last_op[0];
 318         op[1] = last_op[1];
 319         addrlo = last_addr_lo;
 320         addrhi = last_addr_hi;
 321         reglo  = last_reg_lo;
 322         reghi  = last_reg_hi;
 323         data   = last_data;
 324
 325         if ((flag & CMD_FLAG_REPEAT) == 0) {
 326                 op[0] = argv[1][0];
 327                 if (strlen(argv[1]) > 1)
 328                         op[1] = argv[1][1];
 329                 else
 330                         op[1] = '\0';
 331
 332                 if (argc >= 3)
 333                         extract_range(argv[2], &addrlo, &addrhi);
 334                 if (argc >= 4)
 335                         extract_range(argv[3], &reglo, &reghi);
 336                 if (argc >= 5)
 337                         data = simple_strtoul (argv[4], NULL, 16);
 338         }
 339
 340         /* use current device */
 341         devname = miiphy_get_current_dev();
 342
 343         /*
 344          * check info/read/write.
 345          */
 346         if (op[0] == 'i') {
 347                 unsigned char j, start, end;
 348                 unsigned int oui;
 349                 unsigned char model;
 350                 unsigned char rev;
 351
 352                 /*
 353                  * Look for any and all PHYs.  Valid addresses are 0..31.
 354                  */
 355                 if (argc >= 3) {
 356                         start = addrlo; end = addrhi;
 357                 } else {
 358                         start = 0; end = 31;
 359                 }
 360
 361                 for (j = start; j <= end; j++) {
 362                         if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
 363                                 printf("PHY 0x%02X: "
 364                                         "OUI = 0x%04X, "
 365                                         "Model = 0x%02X, "
 366                                         "Rev = 0x%02X, "
 367                                         "%3dbase%s, %s\n",
 368                                         j, oui, model, rev,
 369                                         miiphy_speed (devname, j),
 370                                         miiphy_is_1000base_x (devname, j)
 371                                                 ? "X" : "T",
 372                                         (miiphy_duplex (devname, j) == FULL)
 373                                                 ? "FDX" : "HDX");
 374                         }
 375                 }
 376         } else if (op[0] == 'r') {
 377                 for (addr = addrlo; addr <= addrhi; addr++) {
 378                         for (reg = reglo; reg <= reghi; reg++) {
 379                                 data = 0xffff;
 380                                 if (miiphy_read (devname, addr, reg, &data) != 0) {
 381                                         printf(
 382                                         "Error reading from the PHY addr=%02x reg=%02x\n",
 383                                                 addr, reg);
 384                                         rcode = 1;
 385                                 } else {
 386                                         if ((addrlo != addrhi) || (reglo != reghi))
 387                                                 printf("addr=%02x reg=%02x data=",
 388                                                         (uint)addr, (uint)reg);
 389                                         printf("%04X\n", data & 0x0000FFFF);
 390                                 }
 391                         }
 392                         if ((addrlo != addrhi) && (reglo != reghi))
 393                                 printf("\n");
 394                 }
 395         } else if (op[0] == 'w') {
 396                 for (addr = addrlo; addr <= addrhi; addr++) {
 397                         for (reg = reglo; reg <= reghi; reg++) {
 398                                 if (miiphy_write (devname, addr, reg, data) != 0) {
 399                                         printf("Error writing to the PHY addr=%02x reg=%02x\n",
 400                                                 addr, reg);
 401                                         rcode = 1;
 402                                 }
 403                         }
 404                 }
 405         } else if (strncmp(op, "du", 2) == 0) {
 406                 ushort regs[6];
 407                 int ok = 1;
 408                 if ((reglo > 5) || (reghi > 5)) {
 409                         printf(
 410                                 "The MII dump command only formats the "
 411                                 "standard MII registers, 0-5.\n");
 412                         return 1;
 413                 }
 414                 for (addr = addrlo; addr <= addrhi; addr++) {
 415                         for (reg = reglo; reg < reghi + 1; reg++) {
 416                                 if (miiphy_read(devname, addr, reg, &regs[reg]) != 0) {
 417                                         ok = 0;
 418                                         printf(
 419                                         "Error reading from the PHY addr=%02x reg=%02x\n",
 420                                                 addr, reg);
 421                                         rcode = 1;
 422                                 }
 423                         }
 424                         if (ok)
 425                                 MII_dump_0_to_5(regs, reglo, reghi);
 426                         printf("\n");
 427                 }
 428         } else if (strncmp(op, "de", 2) == 0) {
 429                 if (argc == 2)
 430                         miiphy_listdev ();
 431                 else
 432                         miiphy_set_current_dev (argv[2]);
 433         } else {
 434                 printf("Usage:\n%s\n", cmdtp->usage);
 435                 return 1;
 436         }
 437
 438         /*
 439          * Save the parameters for repeats.
 440          */
 441         last_op[0] = op[0];
 442         last_op[1] = op[1];
 443         last_addr_lo = addrlo;
 444         last_addr_hi = addrhi;
 445         last_reg_lo  = reglo;
 446         last_reg_hi  = reghi;
 447         last_data    = data;
 448
 449         return rcode;
 450 }
 451
 452 /***************************************************/
 453
 454 U_BOOT_CMD(
 455         mii,    5,      1,      do_mii,
 456         "mii     - MII utility commands\n",
 457         "device                     - list available devices\n"
 458         "mii device <devname>           - set current device\n"
 459         "mii info   <addr>              - display MII PHY info\n"
 460         "mii read   <addr> <reg>        - read  MII PHY <addr> register <reg>\n"
 461         "mii write  <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
 462         "mii dump   <addr> <reg>        - pretty-print <addr> <reg> (0-5 only)\n"
 463         "Addr and/or reg may be ranges, e.g. 2-7.\n"
 464 );