From 91fe628b5cb1c851277156a1f9e56545c4478934 Mon Sep 17 00:00:00 2001 From: thopre01 Date: Fri, 5 May 2017 16:50:40 +0000 Subject: [PATCH] [ARM] Allow combination of aprofile and rmprofile multilibs 2017-05-05 Thomas Preud'homme gcc/ * config.gcc: Allow combinations of aprofile and rmprofile values for --with-multilib-list. * config/arm/t-multilib: New file. * config/arm/t-aprofile: Remove initialization of MULTILIB_* variables. Remove setting of ISA and floating-point ABI in MULTILIB_OPTIONS and MULTILIB_DIRNAMES. Set architecture and FPU in MULTI_ARCH_OPTS_A and MULTI_ARCH_DIRS_A rather than MULTILIB_OPTIONS and MULTILIB_DIRNAMES respectively. Add comment to introduce all matches. Add architecture matches for marvel-pj4 and generic-armv7-a CPU options. * config/arm/t-rmprofile: Likewise except for the matches changes. * doc/install.texi (--with-multilib-list): Document the combination of aprofile and rmprofile values and warn about pitfalls in doing that. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@247646 138bc75d-0d04-0410-961f-82ee72b054a4 --- gcc/ChangeLog | 16 +++++++++++ gcc/config.gcc | 40 ++++++++------------------- gcc/config/arm/t-aprofile | 31 ++++++--------------- gcc/config/arm/t-multilib | 69 ++++++++++++++++++++++++++++++++++++++++++++++ gcc/config/arm/t-rmprofile | 29 ++++--------------- gcc/doc/install.texi | 14 ++++++---- 6 files changed, 120 insertions(+), 79 deletions(-) create mode 100644 gcc/config/arm/t-multilib diff --git a/gcc/ChangeLog b/gcc/ChangeLog index 604193c01d8..db61cd6263e 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,19 @@ +2017-05-05 Thomas Preud'homme + + * config.gcc: Allow combinations of aprofile and rmprofile values for + --with-multilib-list. + * config/arm/t-multilib: New file. + * config/arm/t-aprofile: Remove initialization of MULTILIB_* + variables. Remove setting of ISA and floating-point ABI in + MULTILIB_OPTIONS and MULTILIB_DIRNAMES. Set architecture and FPU in + MULTI_ARCH_OPTS_A and MULTI_ARCH_DIRS_A rather than MULTILIB_OPTIONS + and MULTILIB_DIRNAMES respectively. Add comment to introduce all + matches. Add architecture matches for marvel-pj4 and generic-armv7-a + CPU options. + * config/arm/t-rmprofile: Likewise except for the matches changes. + * doc/install.texi (--with-multilib-list): Document the combination of + aprofile and rmprofile values and warn about pitfalls in doing that. + 2017-05-05 Wilco Dijkstra * config/aarch64/aarch64.md (movsi_aarch64): Remove '*' from r=w. diff --git a/gcc/config.gcc b/gcc/config.gcc index b8bb4d65825..5c9feac7e1b 100644 --- a/gcc/config.gcc +++ b/gcc/config.gcc @@ -3791,34 +3791,18 @@ case "${target}" in # Add extra multilibs if test "x$with_multilib_list" != x; then arm_multilibs=`echo $with_multilib_list | sed -e 's/,/ /g'` - case ${arm_multilibs} in - aprofile) - # Note that arm/t-aprofile is a - # stand-alone make file fragment to be - # used only with itself. We do not - # specifically use the - # TM_MULTILIB_OPTION framework because - # this shorthand is more - # pragmatic. - tmake_profile_file="arm/t-aprofile" - ;; - rmprofile) - # Note that arm/t-rmprofile is a - # stand-alone make file fragment to be - # used only with itself. We do not - # specifically use the - # TM_MULTILIB_OPTION framework because - # this shorthand is more - # pragmatic. - tmake_profile_file="arm/t-rmprofile" - ;; - default) - ;; - *) - echo "Error: --with-multilib-list=${with_multilib_list} not supported." 1>&2 - exit 1 - ;; - esac + if test "x${arm_multilibs}" != xdefault ; then + for arm_multilib in ${arm_multilibs}; do + case ${arm_multilib} in + aprofile|rmprofile) + tmake_profile_file="arm/t-multilib" + ;; + *) + echo "Error: --with-multilib-list=${with_multilib_list} not supported." 1>&2 + exit 1 + ;; + esac + done if test "x${tmake_profile_file}" != x ; then # arm/t-aprofile and arm/t-rmprofile are only diff --git a/gcc/config/arm/t-aprofile b/gcc/config/arm/t-aprofile index 19df7a6bff2..b71cbda3e81 100644 --- a/gcc/config/arm/t-aprofile +++ b/gcc/config/arm/t-aprofile @@ -24,30 +24,13 @@ # have their default values during the configure step. We enforce # this during the top-level configury. -MULTILIB_OPTIONS = -MULTILIB_DIRNAMES = -MULTILIB_EXCEPTIONS = -MULTILIB_MATCHES = -MULTILIB_REUSE = +# Arch and FPU variants to build libraries with -# We have the following hierachy: -# ISA: A32 (.) or T32 (thumb) -# Architecture: ARMv7-A (v7-a), ARMv7VE (v7ve), or ARMv8-A (v8-a). -# FPU: VFPv3-D16 (fpv3), NEONv1 (simdv1), VFPv4-D16 (fpv4), -# NEON-VFPV4 (simdvfpv4), NEON for ARMv8 (simdv8), or None (.). -# Float-abi: Soft (.), softfp (softfp), or hard (hardfp). +MULTI_ARCH_OPTS_A = march=armv7-a/march=armv7ve/march=armv8-a +MULTI_ARCH_DIRS_A = v7-a v7ve v8-a -MULTILIB_OPTIONS += mthumb -MULTILIB_DIRNAMES += thumb - -MULTILIB_OPTIONS += march=armv7-a/march=armv7ve/march=armv8-a -MULTILIB_DIRNAMES += v7-a v7ve v8-a - -MULTILIB_OPTIONS += mfpu=vfpv3-d16/mfpu=neon/mfpu=vfpv4-d16/mfpu=neon-vfpv4/mfpu=neon-fp-armv8 -MULTILIB_DIRNAMES += fpv3 simdv1 fpv4 simdvfpv4 simdv8 - -MULTILIB_OPTIONS += mfloat-abi=softfp/mfloat-abi=hard -MULTILIB_DIRNAMES += softfp hard +MULTI_FPU_OPTS_A = mfpu=vfpv3-d16/mfpu=neon/mfpu=vfpv4-d16/mfpu=neon-vfpv4/mfpu=neon-fp-armv8 +MULTI_FPU_DIRS_A = fpv3 simdv1 fpv4 simdvfpv4 simdv8 # Option combinations to build library with @@ -71,7 +54,11 @@ MULTILIB_REQUIRED += *march=armv8-a MULTILIB_REQUIRED += *march=armv8-a/mfpu=neon-fp-armv8/mfloat-abi=* +# Matches + # CPU Matches +MULTILIB_MATCHES += march?armv7-a=mcpu?marvell-pj4 +MULTILIB_MATCHES += march?armv7-a=mcpu?generic-armv7-a MULTILIB_MATCHES += march?armv7-a=mcpu?cortex-a8 MULTILIB_MATCHES += march?armv7-a=mcpu?cortex-a9 MULTILIB_MATCHES += march?armv7-a=mcpu?cortex-a5 diff --git a/gcc/config/arm/t-multilib b/gcc/config/arm/t-multilib new file mode 100644 index 00000000000..642e7317655 --- /dev/null +++ b/gcc/config/arm/t-multilib @@ -0,0 +1,69 @@ +# Copyright (C) 2016 Free Software Foundation, Inc. +# +# This file is part of GCC. +# +# GCC is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GCC is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GCC; see the file COPYING3. If not see +# . + +# This is a target makefile fragment that attempts to get +# multilibs built for the range of CPU's, FPU's and ABI's that +# are relevant for the ARM architecture. It should not be used in +# conjunction with another make file fragment and assumes --with-arch, +# --with-cpu, --with-fpu, --with-float, --with-mode have their default +# values during the configure step. We enforce this during the +# top-level configury. + +MULTILIB_OPTIONS = +MULTILIB_DIRNAMES = +MULTILIB_EXCEPTIONS = +MULTILIB_MATCHES = +MULTILIB_REUSE = + +comma := , +tm_multilib_list := $(subst $(comma), ,$(TM_MULTILIB_CONFIG)) + +HAS_APROFILE := $(filter aprofile,$(tm_multilib_list)) +HAS_RMPROFILE := $(filter rmprofile,$(tm_multilib_list)) + +ifneq (,$(HAS_APROFILE)) +include $(srcdir)/config/arm/t-aprofile +endif +ifneq (,$(HAS_RMPROFILE)) +include $(srcdir)/config/arm/t-rmprofile +endif +SEP := $(and $(HAS_APROFILE),$(HAS_RMPROFILE),/) + + +# We have the following hierachy: +# ISA: A32 (.) or T16/T32 (thumb) +# Architecture: ARMv6-M (v6-m), ARMv7-M (v7-m), ARMv7E-M (v7e-m), +# ARMv7 (v7-ar), ARMv7-A (v7-a), ARMv7VE (v7ve), +# ARMv8-M Baseline (v8-m.base), ARMv8-M Mainline (v8-m.main) +# or ARMv8-A (v8-a). +# FPU: VFPv3-D16 (fpv3), NEONv1 (simdv1), FPV4-SP-D16 (fpv4-sp), +# VFPv4-D16 (fpv4), NEON-VFPV4 (simdvfpv4), FPV5-SP-D16 (fpv5-sp), +# VFPv5-D16 (fpv5), NEON for ARMv8 (simdv8), or None (.). +# Float-abi: Soft (.), softfp (softfp), or hard (hard). + +MULTILIB_OPTIONS += mthumb +MULTILIB_DIRNAMES += thumb + +MULTILIB_OPTIONS += $(MULTI_ARCH_OPTS_A)$(SEP)$(MULTI_ARCH_OPTS_RM) +MULTILIB_DIRNAMES += $(MULTI_ARCH_DIRS_A) $(MULTI_ARCH_DIRS_RM) + +MULTILIB_OPTIONS += $(MULTI_FPU_OPTS_A)$(SEP)$(MULTI_FPU_OPTS_RM) +MULTILIB_DIRNAMES += $(MULTI_FPU_DIRS_A) $(MULTI_FPU_DIRS_RM) + +MULTILIB_OPTIONS += mfloat-abi=softfp/mfloat-abi=hard +MULTILIB_DIRNAMES += softfp hard diff --git a/gcc/config/arm/t-rmprofile b/gcc/config/arm/t-rmprofile index 2a48f9149a7..8cd735110b6 100644 --- a/gcc/config/arm/t-rmprofile +++ b/gcc/config/arm/t-rmprofile @@ -24,33 +24,14 @@ # values during the configure step. We enforce this during the # top-level configury. -MULTILIB_OPTIONS = -MULTILIB_DIRNAMES = -MULTILIB_EXCEPTIONS = -MULTILIB_MATCHES = -MULTILIB_REUSE = -# We have the following hierachy: -# ISA: A32 (.) or T16/T32 (thumb). -# Architecture: ARMv6S-M (v6-m), ARMv7-M (v7-m), ARMv7E-M (v7e-m), -# ARMv8-M Baseline (v8-m.base) or ARMv8-M Mainline (v8-m.main). -# FPU: VFPv3-D16 (fpv3), FPV4-SP-D16 (fpv4-sp), FPV5-SP-D16 (fpv5-sp), -# VFPv5-D16 (fpv5), or None (.). -# Float-abi: Soft (.), softfp (softfp), or hard (hardfp). +# Arch and FPU variants to build libraries with -# Options to build libraries with +MULTI_ARCH_OPTS_RM = march=armv6s-m/march=armv7-m/march=armv7e-m/march=armv7/march=armv8-m.base/march=armv8-m.main +MULTI_ARCH_DIRS_RM = v6-m v7-m v7e-m v7-ar v8-m.base v8-m.main -MULTILIB_OPTIONS += mthumb -MULTILIB_DIRNAMES += thumb - -MULTILIB_OPTIONS += march=armv6s-m/march=armv7-m/march=armv7e-m/march=armv7/march=armv8-m.base/march=armv8-m.main -MULTILIB_DIRNAMES += v6-m v7-m v7e-m v7-ar v8-m.base v8-m.main - -MULTILIB_OPTIONS += mfpu=vfpv3-d16/mfpu=fpv4-sp-d16/mfpu=fpv5-sp-d16/mfpu=fpv5-d16 -MULTILIB_DIRNAMES += fpv3 fpv4-sp fpv5-sp fpv5 - -MULTILIB_OPTIONS += mfloat-abi=softfp/mfloat-abi=hard -MULTILIB_DIRNAMES += softfp hard +MULTI_FPU_OPTS_RM = mfpu=vfpv3-d16/mfpu=fpv4-sp-d16/mfpu=fpv5-sp-d16/mfpu=fpv5-d16 +MULTI_FPU_DIRS_RM = fpv3 fpv4-sp fpv5-sp fpv5 # Option combinations to build library with diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi index f165e119080..b13fc1f6f42 100644 --- a/gcc/doc/install.texi +++ b/gcc/doc/install.texi @@ -1092,14 +1092,18 @@ for each target is given below. @table @code @item arm*-*-* -@var{list} is one of@code{default}, @code{aprofile} or @code{rmprofile}. -Specifying @code{default} is equivalent to omitting this option, ie. only the -default runtime library will be enabled. Specifying @code{aprofile} or -@code{rmprofile} builds multilibs for a combination of ISA, architecture, -FPU available and floating-point ABI. +@var{list} is a comma separated list of @code{aprofile} and @code{rmprofile} +to build multilibs for A or R and M architecture profiles respectively. Note +that, due to some limitation of the current multilib framework, using the +combined @code{aprofile,rmprofile} multilibs selects in some cases a less +optimal multilib than when using the multilib profile for the architecture +targetted. The special value @code{default} is also accepted and is equivalent +to omitting the option, ie. only the default run-time library will be enabled. The table below gives the combination of ISAs, architectures, FPUs and floating-point ABIs for which multilibs are built for each accepted value. +The union of these options is considered when specifying both @code{aprofile} +and @code{rmprofile}. @multitable @columnfractions .15 .28 .30 @item Option @tab aprofile @tab rmprofile -- 2.11.4.GIT