From 378ac65e6c6779c526c9016cafb61d84ff9cbecd Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 18 Sep 2009 16:14:22 +0100 Subject: [PATCH] ARM: 5709/1: at91: add AC97 support to at91sam9g45 series and at91sam9m10g45ek board Add the support of AC97 on the at91sam9g45 chip series and -ek board. It will share the code with AVR32 ac97c alsa driver "atmel_ac97c". Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91sam9g45_devices.c | 55 ++++++++++++++++++++++++++++++++ arch/arm/mach-at91/board-sam9m10g45ek.c | 10 ++++++ 2 files changed, 65 insertions(+) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 45720c84f0b..d581cff80c4 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -598,6 +598,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- + * AC97 + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) +static u64 ac97_dmamask = DMA_BIT_MASK(32); +static struct ac97c_platform_data ac97_data; + +static struct resource ac97_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_AC97C, + .end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AC97C, + .end = AT91SAM9G45_ID_AC97C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_ac97_device = { + .name = "atmel_ac97c", + .id = 0, + .dev = { + .dma_mask = &ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &ac97_data, + }, + .resource = ac97_resources, + .num_resources = ARRAY_SIZE(ac97_resources), +}; + +void __init at91_add_device_ac97(struct ac97c_platform_data *data) +{ + if (!data) + return; + + at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */ + at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */ + at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */ + at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */ + + /* reset */ + if (data->reset_pin) + at91_set_gpio_output(data->reset_pin, 0); + + ac97_data = *data; + platform_device_register(&at91sam9g45_ac97_device); +} +#else +void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} +#endif + + +/* -------------------------------------------------------------------- * LCD Controller * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index b8558eae522..64c3843f323 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -311,6 +311,14 @@ static void __init ek_add_device_buttons(void) {} /* + * AC97 + * reset_pin is not connected: NRST + */ +static struct ac97c_platform_data ek_ac97_data = { +}; + + +/* * LEDs ... these could all be PWM-driven, for variable brightness */ static struct gpio_led ek_leds[] = { @@ -372,6 +380,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* Push Buttons */ ek_add_device_buttons(); + /* AC97 */ + at91_add_device_ac97(&ek_ac97_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); -- 2.11.4.GIT