drivers/net/sungem_phy.h

   1 #ifndef __SUNGEM_PHY_H__
   2 #define __SUNGEM_PHY_H__
   3
   4 struct mii_phy;
   5
   6 /* Operations supported by any kind of PHY */
   7 struct mii_phy_ops
   8 {
   9         int             (*init)(struct mii_phy *phy);
  10         int             (*suspend)(struct mii_phy *phy, int wol_options);
  11         int             (*setup_aneg)(struct mii_phy *phy, u32 advertise);
  12         int             (*setup_forced)(struct mii_phy *phy, int speed, int fd);
  13         int             (*poll_link)(struct mii_phy *phy);
  14         int             (*read_link)(struct mii_phy *phy);
  15 };
  16
  17 /* Structure used to statically define an mii/gii based PHY */
  18 struct mii_phy_def
  19 {
  20         u32                             phy_id;         /* Concatenated ID1 << 16 | ID2 */
  21         u32                             phy_id_mask;    /* Significant bits */
  22         u32                             features;       /* Ethtool SUPPORTED_* defines */
  23         int                             magic_aneg;     /* Autoneg does all speed test for us */
  24         const char*                     name;
  25         const struct mii_phy_ops*       ops;
  26 };
  27
  28 /* An instance of a PHY, partially borrowed from mii_if_info */
  29 struct mii_phy
  30 {
  31         struct mii_phy_def*     def;
  32         int                     advertising;
  33         int                     mii_id;
  34
  35         /* 1: autoneg enabled, 0: disabled */
  36         int                     autoneg;
  37
  38         /* forced speed & duplex (no autoneg)
  39          * partner speed & duplex & pause (autoneg)
  40          */
  41         int                     speed;
  42         int                     duplex;
  43         int                     pause;
  44
  45         /* Provided by host chip */
  46         struct net_device*      dev;
  47         int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
  48         void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
  49 };
  50
  51 /* Pass in a struct mii_phy with dev, mdio_read and mdio_write
  52  * filled, the remaining fields will be filled on return
  53  */
  54 extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
  55
  56
  57 /* MII definitions missing from mii.h */
  58
  59 #define BMCR_SPD2       0x0040          /* Gigabit enable (bcm54xx)     */
  60 #define LPA_PAUSE       0x0400
  61
  62 /* More PHY registers (model specific) */
  63
  64 /* MII BCM5201 MULTIPHY interrupt register */
  65 #define MII_BCM5201_INTERRUPT                   0x1A
  66 #define MII_BCM5201_INTERRUPT_INTENABLE         0x4000
  67
  68 #define MII_BCM5201_AUXMODE2                    0x1B
  69 #define MII_BCM5201_AUXMODE2_LOWPOWER           0x0008
  70
  71 #define MII_BCM5201_MULTIPHY                    0x1E
  72
  73 /* MII BCM5201 MULTIPHY register bits */
  74 #define MII_BCM5201_MULTIPHY_SERIALMODE         0x0002
  75 #define MII_BCM5201_MULTIPHY_SUPERISOLATE       0x0008
  76
  77 /* MII BCM5221 Additional registers */
  78 #define MII_BCM5221_TEST                        0x1f
  79 #define MII_BCM5221_TEST_ENABLE_SHADOWS         0x0080
  80 #define MII_BCM5221_SHDOW_AUX_STAT2             0x1b
  81 #define MII_BCM5221_SHDOW_AUX_STAT2_APD         0x0020
  82 #define MII_BCM5221_SHDOW_AUX_MODE4             0x1a
  83 #define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR    0x0004
  84
  85 /* MII BCM5400 1000-BASET Control register */
  86 #define MII_BCM5400_GB_CONTROL                  0x09
  87 #define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP    0x0200
  88
  89 /* MII BCM5400 AUXCONTROL register */
  90 #define MII_BCM5400_AUXCONTROL                  0x18
  91 #define MII_BCM5400_AUXCONTROL_PWR10BASET       0x0004
  92
  93 /* MII BCM5400 AUXSTATUS register */
  94 #define MII_BCM5400_AUXSTATUS                   0x19
  95 #define MII_BCM5400_AUXSTATUS_LINKMODE_MASK     0x0700
  96 #define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT    8
  97
  98 /* 1000BT control (Marvell & BCM54xx at least) */
  99 #define MII_1000BASETCONTROL                    0x09
 100 #define MII_1000BASETCONTROL_FULLDUPLEXCAP      0x0200
 101 #define MII_1000BASETCONTROL_HALFDUPLEXCAP      0x0100
 102
 103 /* Marvell 88E1011 PHY control */
 104 #define MII_M1011_PHY_SPEC_CONTROL              0x10
 105 #define MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX  0x20
 106 #define MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX    0x40
 107
 108 /* Marvell 88E1011 PHY status */
 109 #define MII_M1011_PHY_SPEC_STATUS               0x11
 110 #define MII_M1011_PHY_SPEC_STATUS_1000          0x8000
 111 #define MII_M1011_PHY_SPEC_STATUS_100           0x4000
 112 #define MII_M1011_PHY_SPEC_STATUS_SPD_MASK      0xc000
 113 #define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX    0x2000
 114 #define MII_M1011_PHY_SPEC_STATUS_RESOLVED      0x0800
 115
 116 #endif /* __SUNGEM_PHY_H__ */