firmware/export/config/sansam200v4.h

   1 /*
   2  * This config file is for the Sansa M200 V4 series
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 42
   8
   9 #define MODEL_NAME   "Sandisk Sansa m200 v4 series"
  10
  11 /* Enable FAT16 support */
  12 #define HAVE_FAT16SUPPORT
  13
  14 #define HW_SAMPR_CAPS       SAMPR_CAP_ALL
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 #define REC_SAMPR_CAPS      SAMPR_CAP_ALL
  20
  21 /* Define bitmask of input sources - recordable bitmask can be defined
  22    explicitly if different */
  23 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  24
  25 /* define this if you have a bitmap LCD display */
  26 #define HAVE_LCD_BITMAP
  27
  28 /* define this if you can flip your LCD */
  29 #define HAVE_LCD_FLIP
  30
  31 /* define this if you can invert the colours on your LCD */
  32 #define HAVE_LCD_INVERT
  33
  34 /* define this if you have access to the quickscreen */
  35 //#define HAVE_QUICKSCREEN
  36 /* define this if you have access to the pitchscreen */
  37 #define HAVE_PITCHSCREEN
  38
  39 /* define this if you would like tagcache to build on this target */
  40 //#define HAVE_TAGCACHE
  41
  42 /* define this if you have a flash memory storage */
  43 #define HAVE_FLASH_STORAGE
  44
  45 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
  46 #define CONFIG_STORAGE STORAGE_SD
  47
  48 /* LCD dimensions */
  49 #define LCD_WIDTH  128
  50 #define LCD_HEIGHT 64
  51 #define LCD_DEPTH  1
  52
  53 #define LCD_PIXELFORMAT VERTICAL_PACKING
  54
  55 /* Display colours, for screenshots and sim (0xRRGGBB) */
  56 #define LCD_DARKCOLOR       0x000000
  57 #define LCD_BRIGHTCOLOR     0x5e6854
  58 #define LCD_BL_DARKCOLOR    0x000000
  59 #define LCD_BL_BRIGHTCOLOR  0x3ca0e6
  60
  61 /* define this to indicate your device's keypad */
  62 #define CONFIG_KEYPAD SANSA_M200_PAD
  63
  64 /* Define this to enable morse code input */
  65 #define HAVE_MORSE_INPUT
  66
  67 /* define this if you have a real-time clock */
  68 #ifndef BOOTLOADER
  69 #define CONFIG_RTC RTC_AS3514
  70 #endif
  71
  72 /* define this if you have RTC RAM available for settings */
  73 //#define HAVE_RTC_RAM
  74
  75 /* Define this if you have a software controlled poweroff */
  76 #define HAVE_SW_POWEROFF
  77
  78 /* The number of bytes reserved for loadable codecs */
  79 #define CODEC_SIZE 0x48000 /* in IRAM */
  80
  81 /* The number of bytes reserved for loadable plugins */
  82 #define PLUGIN_BUFFER_SIZE 0x45000
  83
  84 #define AB_REPEAT_ENABLE 1
  85
  86 #define CONFIG_TUNER TEA5767
  87 #define CONFIG_TUNER_XTAL 32768
  88
  89 /* Define this if you do software codec */
  90 #define CONFIG_CODEC SWCODEC
  91
  92 /* Define this if you have the TLV320 audio codec */
  93 /*#define HAVE_TLV320*/
  94
  95 /* TLV320 has no tone controls, so we use the software ones */
  96 #define HAVE_SW_TONE_CONTROLS
  97
  98 /* We're working on the assumption that the AS3525 has something
  99    similar to the AS3514 for audio codec etc */
 100 #define HAVE_AS3514
 101
 102 /* Define this for LCD backlight available */
 103 #define HAVE_BACKLIGHT
 104
 105 /* Define how much SD sectors are reserved for OF */
 106 #define AMS_OF_SIZE 0x5000
 107
 108 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
 109 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
 110 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 111 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 112 #define BATTERY_TYPES_COUNT  1    /* only one type */
 113
 114 /* define this if the unit should not shut down on low battery. */
 115 #define NO_LOW_BATTERY_SHUTDOWN
 116
 117 /* Define this if you have an AMS AS3525 */
 118 #define CONFIG_CPU AS3525
 119
 120 /* Define this if you want to use the AS3525 i2c interface */
 121 #define CONFIG_I2C I2C_AS3525
 122
 123 /* Define this to the CPU frequency */
 124 #define CPU_FREQ      248000000
 125
 126 /* Define this if you have adjustable CPU frequency */
 127 #define HAVE_ADJUSTABLE_CPU_FREQ
 128
 129 /* Offset ( in the firmware file's header ) to the file CRC */
 130 #define FIRMWARE_OFFSET_FILE_CRC 0
 131
 132 /* Offset ( in the firmware file's header ) to the real data */
 133 #define FIRMWARE_OFFSET_FILE_DATA 8
 134
 135 #ifndef BOOTLOADER
 136
 137 #define USB_HANDLED_BY_OF
 138
 139 #define CONFIG_USBOTG USBOTG_AS3525
 140
 141 /* enable these for the experimental usb stack */
 142 #define HAVE_USBSTACK
 143 #define USB_VENDOR_ID 0x0781
 144 #define USB_PRODUCT_ID 0x7431
 145
 146 #endif /* BOOTLOADER */
 147
 148 #define CONFIG_LCD LCD_SSD1815
 149
 150 #define BOOTFILE_EXT "sansa"
 151 #define BOOTFILE "rockbox." BOOTFILE_EXT
 152 #define BOOTDIR "/.rockbox"
 153
 154 #define IBSS_ATTR_VOICE_STACK
 155 #define ICODE_ATTR_TREMOR_NOT_MDCT
 156 #define ICODE_ATTR_TREMOR_MDCT
 157 #define ICODE_ATTR_FLAC
 158 #define IBSS_ATTR_FLAC_DECODED0
 159 #define ICONST_ATTR_MPA_HUFFMAN
 160 #define IBSS_ATTR_MPC_SAMPLE_BUF
 161 #define ICODE_ATTR_ALAC
 162 #define IBSS_ATTR_SHORTEN_DECODED0
 163
 164 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 165
 166 /* Define this if a programmable hotkey is mapped */
 167 #define HAVE_HOTKEY