fuzev2: prevent button light flickering when accessing µSD
[kugel-rb.git] / bootloader / mini2440.c
blobd735084c6a4125e83ba5ddd2b9a5eae8c63c84d4
1 /***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
10 * Copyright (C) 2009 by Bob Cousins, Lyre Project
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version 2
15 * of the License, or (at your option) any later version.
17 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18 * KIND, either express or implied.
20 ****************************************************************************/
22 /* Include Standard files */
23 #include <stdlib.h>
24 #include <stdio.h>
25 #include "inttypes.h"
26 #include "string.h"
27 #include "cpu.h"
28 #include "system.h"
29 #include "lcd.h"
30 #include "kernel.h"
31 #include "thread.h"
32 #include "storage.h"
33 #include "fat.h"
34 #include "disk.h"
35 #include "font.h"
36 #include "backlight.h"
37 #include "button.h"
38 #include "panic.h"
39 #include "power.h"
40 #include "file.h"
41 #include "common.h"
42 #include "sd.h"
43 #include "backlight-target.h"
44 #include "lcd-target.h"
45 #include "debug-target.h"
46 #include "dma-target.h"
47 #include "uart-s3c2440.h"
48 #include "led-mini2440.h"
51 int main(void)
53 unsigned char* loadbuffer;
54 int buffer_size;
55 int rc;
56 int(*kernel_entry)(void);
58 led_init();
59 clear_leds(LED_ALL);
60 /* NB: something in system_init() prevents H-JTAG from downloading */
61 /* system_init(); */
62 kernel_init();
63 /* enable_interrupt(IRQ_FIQ_STATUS); */
64 backlight_init();
65 lcd_init();
66 lcd_setfont(FONT_SYSFIXED);
67 button_init();
68 dma_init();
70 uart_init();
71 uart_init_device(DEBUG_UART_PORT);
73 /* mini2440_test(); */
75 /* Show debug messages if button is pressed */
76 int touch_data;
77 if(button_read_device(&touch_data) & BUTTON_MENU)
78 verbose = true;
80 printf("Rockbox boot loader");
81 printf("Version %s", APPSVERSION);
83 rc = storage_init();
84 if(rc)
86 reset_screen();
87 error(EATA, rc);
90 disk_init(IF_MD(0));
91 rc = disk_mount_all();
92 if (rc<=0)
94 error(EDISK,rc);
97 printf("Loading firmware");
99 /* Flush out anything pending first */
100 cpucache_invalidate();
102 loadbuffer = (unsigned char*) 0x31000000;
103 buffer_size = (unsigned char*)0x31400000 - loadbuffer;
105 rc = load_firmware(loadbuffer, BOOTFILE, buffer_size);
106 if(rc < 0)
107 error(EBOOTFILE, rc);
109 printf("Loaded firmware %d\n", rc);
111 /* storage_close(); */
112 system_prepare_fw_start();
114 if (rc == EOK)
116 cpucache_invalidate();
117 kernel_entry = (void*) loadbuffer;
118 rc = kernel_entry();
121 /* end stop - should not get here */
122 led_flash(LED_ALL, LED_NONE);
123 while (1); /* avoid warning */