From cf432ca0512d68afa603941ecddbb45bb7ded01d Mon Sep 17 00:00:00 2001 From: Martin von Zweigbergk Date: Sun, 6 Feb 2011 13:43:39 -0500 Subject: [PATCH] rebase: factor out command line option processing Factor out the command line processing in git-rebase--interactive.sh to git-rebase.sh. Store the options in variables in git-rebase.sh and then source git-rebase--interactive.sh. Suggested-by: Johannes Sixt Signed-off-by: Martin von Zweigbergk Signed-off-by: Junio C Hamano --- git-rebase--interactive.sh | 224 +++++++++++++-------------------------------- git-rebase.sh | 58 ++++++++---- 2 files changed, 100 insertions(+), 182 deletions(-) diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh index 8b0d7b0ac1..9c43c60170 100755 --- a/git-rebase--interactive.sh +++ b/git-rebase--interactive.sh @@ -10,31 +10,7 @@ # The original idea comes from Eric W. Biederman, in # http://article.gmane.org/gmane.comp.version-control.git/22407 -OPTIONS_KEEPDASHDASH= -OPTIONS_SPEC="\ -git-rebase [-i] [options] [--] [] -git-rebase [-i] (--continue | --abort | --skip) --- - Available options are -v,verbose display a diffstat of what changed upstream -onto= rebase onto given branch instead of upstream -p,preserve-merges try to recreate merges instead of ignoring them -s,strategy= use the given merge strategy -no-ff cherry-pick all commits, even if unchanged -m,merge always used (no-op) -i,interactive always used (no-op) - Actions: -continue continue rebasing process -abort abort rebasing process and restore original branch -skip skip current patch and continue rebasing process -no-verify override pre-rebase hook from stopping the operation -verify allow pre-rebase hook to run -root rebase all reachable commmits up to the root(s) -autosquash move commits that begin with squash!/fixup! under -i -" - . git-sh-setup -require_work_tree dotest="$GIT_DIR/rebase-merge" @@ -105,16 +81,6 @@ amend="$dotest"/amend rewritten_list="$dotest"/rewritten-list rewritten_pending="$dotest"/rewritten-pending -preserve_merges= -strategy= -onto= -verbose= -ok_to_skip_pre_rebase= -rebase_root= -autosquash= -test "$(git config --bool rebase.autosquash)" = "true" && autosquash=t -force_rebase= - GIT_CHERRY_PICK_HELP="\ hint: after resolving the conflicts, mark the corrected paths hint: with 'git add ' and run 'git rebase --continue'" @@ -648,15 +614,6 @@ skip_unnecessary_picks () { die "Could not skip unnecessary pick commands" } -# check if no other options are set -is_standalone () { - test $# -eq 2 -a "$2" = '--' && - test -z "$onto" && - test -z "$preserve_merges" && - test -z "$strategy" && - test -z "$verbose" -} - get_saved_options () { test -d "$rewritten" && preserve_merges=t test -f "$dotest"/strategy && strategy="$(cat "$dotest"/strategy)" @@ -744,134 +701,77 @@ parse_onto () { git rev-parse --verify "$1^0" } -while test $# != 0 -do - case "$1" in - --no-verify) - ok_to_skip_pre_rebase=yes - ;; - --verify) - ok_to_skip_pre_rebase= - ;; - --continue) - is_standalone "$@" || usage - get_saved_options - comment_for_reflog continue - - test -d "$dotest" || die "No interactive rebase running" - - # Sanity check - git rev-parse --verify HEAD >/dev/null || - die "Cannot read HEAD" - git update-index --ignore-submodules --refresh && - git diff-files --quiet --ignore-submodules || - die "Working tree is dirty" - - # do we have anything to commit? - if git diff-index --cached --quiet --ignore-submodules HEAD -- +case "$action" in +continue) + get_saved_options + comment_for_reflog continue + + test -d "$dotest" || die "No interactive rebase running" + + # Sanity check + git rev-parse --verify HEAD >/dev/null || + die "Cannot read HEAD" + git update-index --ignore-submodules --refresh && + git diff-files --quiet --ignore-submodules || + die "Working tree is dirty" + + # do we have anything to commit? + if git diff-index --cached --quiet --ignore-submodules HEAD -- + then + : Nothing to commit -- skip this + else + . "$author_script" || + die "Cannot find the author identity" + current_head= + if test -f "$amend" then - : Nothing to commit -- skip this - else - . "$author_script" || - die "Cannot find the author identity" - current_head= - if test -f "$amend" - then - current_head=$(git rev-parse --verify HEAD) - test "$current_head" = $(cat "$amend") || - die "\ + current_head=$(git rev-parse --verify HEAD) + test "$current_head" = $(cat "$amend") || + die "\ You have uncommitted changes in your working tree. Please, commit them first and then run 'git rebase --continue' again." - git reset --soft HEAD^ || - die "Cannot rewind the HEAD" - fi - do_with_author git commit --no-verify -F "$msg" -e || { - test -n "$current_head" && git reset --soft $current_head - die "Could not commit staged changes." - } + git reset --soft HEAD^ || + die "Cannot rewind the HEAD" fi + do_with_author git commit --no-verify -F "$msg" -e || { + test -n "$current_head" && git reset --soft $current_head + die "Could not commit staged changes." + } + fi - record_in_rewritten "$(cat "$dotest"/stopped-sha)" + record_in_rewritten "$(cat "$dotest"/stopped-sha)" - require_clean_work_tree "rebase" - do_rest - ;; - --abort) - is_standalone "$@" || usage - get_saved_options - comment_for_reflog abort - - git rerere clear - test -d "$dotest" || die "No interactive rebase running" - - headname=$(cat "$dotest"/head-name) - head=$(cat "$dotest"/head) - case $headname in - refs/*) - git symbolic-ref HEAD $headname - ;; - esac && - output git reset --hard $head && - rm -rf "$dotest" - exit - ;; - --skip) - is_standalone "$@" || usage - get_saved_options - comment_for_reflog skip + require_clean_work_tree "rebase" + do_rest + ;; +abort) + get_saved_options + comment_for_reflog abort - git rerere clear - test -d "$dotest" || die "No interactive rebase running" + git rerere clear + test -d "$dotest" || die "No interactive rebase running" - output git reset --hard && do_rest - ;; - -s) - case "$#,$1" in - *,*=*) - strategy=$(expr "z$1" : 'z-[^=]*=\(.*\)') ;; - 1,*) - usage ;; - *) - strategy="$2" - shift ;; - esac - ;; - -m) - # we use merge anyway - ;; - -v) - verbose=t - ;; - -p) - preserve_merges=t - ;; - -i) - # yeah, we know - ;; - --no-ff) - force_rebase=t - ;; - --root) - rebase_root=t - ;; - --autosquash) - autosquash=t - ;; - --no-autosquash) - autosquash= - ;; - --onto) - test 2 -le "$#" || usage - onto="$2" - shift - ;; - --) - shift - break + headname=$(cat "$dotest"/head-name) + head=$(cat "$dotest"/head) + case $headname in + refs/*) + git symbolic-ref HEAD $headname ;; - esac - shift -done + esac && + output git reset --hard $head && + rm -rf "$dotest" + exit + ;; +skip) + get_saved_options + comment_for_reflog skip + + git rerere clear + test -d "$dotest" || die "No interactive rebase running" + + output git reset --hard && do_rest + ;; +esac if test -n "$onto" then diff --git a/git-rebase.sh b/git-rebase.sh index 3eac5a48b6..aa1bcaf07f 100755 --- a/git-rebase.sh +++ b/git-rebase.sh @@ -64,6 +64,9 @@ type= state_dir= # One of {'', continue, skip, abort}, as parsed from command line action= +preserve_merges= +autosquash= +test "$(git config --bool rebase.autosquash)" = "true" && autosquash=t read_state () { if test "$type" = merge @@ -176,27 +179,12 @@ finish_rb_merge () { say All done. } -is_interactive () { - while test $# != 0 - do - case "$1" in - -i|--interactive) - interactive_rebase=explicit - break - ;; - -p|--preserve-merges) - interactive_rebase=implied - ;; - esac - shift - done - +run_interactive_rebase () { if [ "$interactive_rebase" = implied ]; then GIT_EDITOR=: export GIT_EDITOR fi - - test -n "$interactive_rebase" || test -f "$merge_dir"/interactive + . git-rebase--interactive "$@" } run_pre_rebase_hook () { @@ -211,8 +199,6 @@ run_pre_rebase_hook () { test -f "$apply_dir"/applying && die 'It looks like git-am is in progress. Cannot rebase.' -is_interactive "$@" && exec git-rebase--interactive "$@" - if test -d "$apply_dir" then type=am @@ -249,6 +235,19 @@ do onto="$2" shift ;; + -i|--interactive) + interactive_rebase=explicit + ;; + -p|--preserve-merges) + preserve_merges=t + test -z "$interactive_rebase" && interactive_rebase=implied + ;; + --autosquash) + autosquash=t + ;; + --no-autosquash) + autosquash= + ;; -M|-m|--m|--me|--mer|--merg|--merge) do_merge=t ;; @@ -339,7 +338,11 @@ do done test $# -gt 2 && usage -test -n "$action" && test -z "$in_progress" && die "No rebase in progress?" +if test -n "$action" +then + test -z "$in_progress" && die "No rebase in progress?" + test "$type" = interactive && run_interactive_rebase +fi case "$action" in continue) @@ -415,6 +418,21 @@ fi test $# -eq 0 && test -z "$rebase_root" && usage +if test -n "$interactive_rebase" +then + type=interactive + state_dir="$merge_dir" +elif test -n "$do_merge" +then + type=merge + state_dir="$merge_dir" +else + type=am + state_dir="$apply_dir" +fi + +test "$type" = interactive && run_interactive_rebase "$@" + require_clean_work_tree "rebase" "Please commit or stash them." if test -z "$rebase_root" -- 2.11.4.GIT