From d7f22ed23ee11807baeb0c835c50bb7089a0f49d Mon Sep 17 00:00:00 2001 From: Ralf Thielow Date: Fri, 8 Jun 2012 19:15:10 +0200 Subject: [PATCH] l10n: de.po: translate 27 new messages Translate 27 new messages came from git.pot update in 7256fd7 (l10n: Update git.pot (27 new, 1 removed messages)). Signed-off-by: Ralf Thielow --- po/de.po | 216 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 210 insertions(+), 6 deletions(-) diff --git a/po/de.po b/po/de.po index 23829ef7ff..70d8418f73 100644 --- a/po/de.po +++ b/po/de.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: git 1.7.11\n" "Report-Msgid-Bugs-To: Git Mailing List \n" -"POT-Creation-Date: 2012-06-02 07:03+0800\n" +"POT-Creation-Date: 2012-06-08 10:20+0800\n" "PO-Revision-Date: 2012-03-28 18:46+0200\n" "Last-Translator: Ralf Thielow \n" "Language-Team: German\n" @@ -4929,6 +4929,32 @@ msgstr "" msgid "You need to set your committer info first" msgstr "Du musst zuerst die Informationen des Eintragenden setzen." +#: git-am.sh:95 +msgid "" +"You seem to have moved HEAD since the last 'am' failure.\n" +"Not rewinding to ORIG_HEAD" +msgstr "" +"Du scheinst seit dem letzten gescheiterten 'am' die Zweigspitze (HEAD)\n" +"geändert zu haben.\n" +"Keine Zurücksetzung zu ORIG_HEAD." + +#: git-am.sh:105 +#, sh-format +msgid "" +"When you have resolved this problem run \"$cmdline --resolved\".\n" +"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n" +"To restore the original branch and stop patching run \"$cmdline --abort\"." +msgstr "" +"Wenn du das Problem aufgelöst hast, führe \"$cmdline --resolved\" aus.\n" +"Falls du diesen Patch auslassen möchtest, führe stattdessen " +"\"$cmdline --skip\" aus.\n" +"Um den ursprünglichen Zweig wiederherzustellen und die Anwendung der Patches\n" +"abzubrechen, führe \"$cmdline --abort\" aus." + +#: git-am.sh:121 +msgid "Cannot fall back to three-way merge." +msgstr "Kann nicht zu 3-Wege-Zusammenführung zurückfallen." + #: git-am.sh:137 msgid "Repository lacks necessary blobs to fall back on 3-way merge." msgstr "" @@ -4985,12 +5011,33 @@ msgid "Dirty index: cannot apply patches (dirty: $files)" msgstr "" "Unsaubere Bereitstellung: kann Patches nicht anwenden (unsauber: $files)" +#: git-am.sh:671 +#, sh-format +msgid "" +"Patch is empty. Was it split wrong?\n" +"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n" +"To restore the original branch and stop patching run \"$cmdline --abort\"." +msgstr "" +"Patch ist leer. Wurde er falsch aufgeteilt?\n" +"Wenn du diesen Patch auslassen möchtest, führe stattdessen " +"\"$cmdline --skip\" aus.\n" +"Um den ursprünglichen Zweig wiederherzustellen und die Anwendung der Patches\n" +"abzubrechen, führe \"$cmdline --abort\" aus." + +#: git-am.sh:708 +msgid "Patch does not have a valid e-mail address." +msgstr "Patch enthält keine gültige eMail-Adresse." + #: git-am.sh:755 msgid "cannot be interactive without stdin connected to a terminal." msgstr "" "Kann nicht interaktiv sein, ohne dass die Standard-Eingabe mit einem " "Terminal verbunden ist." +#: git-am.sh:759 +msgid "Commit Body is:" +msgstr "Beschreibung der Eintragung ist:" + #. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a] #. in your translation. The program will only accept English #. input at this point. @@ -5003,14 +5050,42 @@ msgstr "Anwenden? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all " msgid "Applying: $FIRSTLINE" msgstr "Wende an: $FIRSTLINE" +#: git-am.sh:823 +msgid "" +"No changes - did you forget to use 'git add'?\n" +"If there is nothing left to stage, chances are that something else\n" +"already introduced the same changes; you might want to skip this patch." +msgstr "" +"Keine Änderungen - hast du vergessen 'git add' zu benutzen?\n" +"Wenn keine Änderungen mehr zum Bereitstellen vorhanden sind, könnten\n" +"diese bereits anderweitig eingefügt worden sein; du könntest diesen Patch\n" +"auslassen." + +#: git-am.sh:831 +msgid "" +"You still have unmerged paths in your index\n" +"did you forget to use 'git add'?" +msgstr "" +"Du hast immer noch nicht zusammengeführte Pfade in der Bereitstellung.\n" +"Hast du vergessen 'git add' zu benutzen?" + #: git-am.sh:847 msgid "No changes -- Patch already applied." msgstr "Keine Änderungen -- Patches bereits angewendet." +#: git-am.sh:857 +#, sh-format +msgid "Patch failed at $msgnum $FIRSTLINE" +msgstr "Anwendung des Patches fehlgeschlagen bei $msgnum $FIRSTLINE" + #: git-am.sh:873 msgid "applying to an empty history" msgstr "wende zu leerer Historie an" +#: git-bisect.sh:48 +msgid "You need to start by \"git bisect start\"" +msgstr "Du musst mit \"git bisect start\" beginnen." + #. TRANSLATORS: Make sure to include [Y] and [n] in your #. translation. The program will only accept English input #. at this point. @@ -5071,6 +5146,12 @@ msgstr "Ungültige Referenz-Eingabe: $rev" msgid "'git bisect bad' can take only one argument." msgstr "'git bisect bad' kann nur ein Argument entgegennehmen." +#. have bad but not good. we could bisect although +#. this is less optimum. +#: git-bisect.sh:273 +msgid "Warning: bisecting only with a bad commit." +msgstr "Warnung: halbiere nur mit einer fehlerhaften Version" + #. TRANSLATORS: Make sure to include [Y] and [n] in your #. translation. The program will only accept English input #. at this point. @@ -5078,6 +5159,29 @@ msgstr "'git bisect bad' kann nur ein Argument entgegennehmen." msgid "Are you sure [Y/n]? " msgstr "Bist du sicher [Y/n]? " +#: git-bisect.sh:289 +msgid "" +"You need to give me at least one good and one bad revisions.\n" +"(You can use \"git bisect bad\" and \"git bisect good\" for that.)" +msgstr "" +"Du musst mindestens eine korrekte und eine fehlerhafte Version angeben.\n" +"(Du kannst dafür \"git bisect bad\" und \"git bisect good\" benutzen.)" + +#: git-bisect.sh:292 +msgid "" +"You need to start by \"git bisect start\".\n" +"You then need to give me at least one good and one bad revisions.\n" +"(You can use \"git bisect bad\" and \"git bisect good\" for that.)" +msgstr "" +"Du musst mit \"git bisect start\" beginnen.\n" +"Danach musst du mindestens eine korrekte und eine fehlerhafte Version " +"angeben.\n" +"(Du kannst dafür \"git bisect bad\" und \"git bisect good\" benutzen.)" + +#: git-bisect.sh:347 git-bisect.sh:474 +msgid "We are not bisecting." +msgstr "Wir sind nicht beim Halbieren." + #: git-bisect.sh:354 #, sh-format msgid "'$invalid' is not a valid commit" @@ -5105,9 +5209,36 @@ msgstr "kann $file nicht für das Abspielen lesen" msgid "?? what are you talking about?" msgstr "?? Was redest du da?" -#: git-bisect.sh:474 -msgid "We are not bisecting." -msgstr "Wir sind nicht beim Halbieren." +#: git-bisect.sh:420 +#, sh-format +msgid "running $command" +msgstr "führe $command aus" + +#: git-bisect.sh:427 +#, sh-format +msgid "" +"bisect run failed:\n" +"exit code $res from '$command' is < 0 or >= 128" +msgstr "" +"Ausführung der Halbierung fehlgeschlagen:\n" +"Rückkehrwert $res von '$command' ist < 0 oder >= 128" + +#: git-bisect.sh:453 +msgid "bisect run cannot continue any more" +msgstr "Ausführung der Halbierung kann nicht mehr fortgesetzt werden" + +#: git-bisect.sh:459 +#, sh-format +msgid "" +"bisect run failed:\n" +"'bisect_state $state' exited with error code $res" +msgstr "" +"Ausführung der Halbierung fehlgeschlagen:\n" +"'bisect_state $state' wurde mit Fehlerwert $res beendet" + +#: git-bisect.sh:466 +msgid "bisect run success" +msgstr "Halbierung erfolgreich ausgeführt" #: git-pull.sh:21 msgid "" @@ -5130,6 +5261,20 @@ msgstr "" "Aktualisiere eine ungeborenen Zweig mit Änderungen, die zur Bereitstellung " "hinzugefügt wurden" +#. The fetch involved updating the current branch. +#. The working tree and the index file is still based on the +#. $orig_head commit, but we are merging into $curr_head. +#. First update the working tree to match $curr_head. +#: git-pull.sh:228 +#, sh-format +msgid "" +"Warning: fetch updated the current branch head.\n" +"Warning: fast-forwarding your working tree from\n" +"Warning: commit $orig_head." +msgstr "" +"Warnung: Die Anforderung aktualisierte die Spitze des aktuellen Zweiges.\n" +"Warnung: Spule deinen Arbeitszweig von Version $orig_head vor." + #: git-pull.sh:253 msgid "Cannot merge multiple branches into empty head" msgstr "Kann nicht mehrere Zweige in einen ungeborenen Zweig zusammenführen" @@ -5166,6 +5311,26 @@ msgstr "Kann temporäre Bereitstellung nicht entfernen (kann nicht passieren)" msgid "Cannot record working tree state" msgstr "Kann Zustand des Arbeitsbaumes nicht aufzeichnen" +#. TRANSLATORS: $option is an invalid option, like +#. `--blah-blah'. The 7 spaces at the beginning of the +#. second line correspond to "error: ". So you should line +#. up the second line with however many characters the +#. translation of "error: " takes in your language. E.g. in +#. English this is: +#. +#. $ git stash save --blah-blah 2>&1 | head -n 2 +#. error: unknown option for 'stash save': --blah-blah +#. To provide a message, use git stash save -- '--blah-blah' +#: git-stash.sh:202 +#, sh-format +msgid "" +"error: unknown option for 'stash save': $option\n" +" To provide a message, use git stash save -- '$option'" +msgstr "" +"Fehler: unbekannte Option für 'stash save': $option\n" +" Um eine Beschreibung anzugeben, benutze \"git stash save -- " +"'$option'\"" + #: git-stash.sh:223 msgid "No local changes to save" msgstr "Keine lokalen Änderungen zum Speichern" @@ -5227,6 +5392,10 @@ msgstr "Konnte Bereitstellungsbaum nicht speichern" msgid "Cannot unstage modified files" msgstr "Kann geänderte Dateien nicht aus der Bereitstellung herausnehmen" +#: git-stash.sh:474 +msgid "Index was not unstashed." +msgstr "Bereitstellung wurde nicht ausgelagert." + #: git-stash.sh:491 #, sh-format msgid "Dropped ${REV} ($s)" @@ -5277,6 +5446,24 @@ msgstr "repo URL: '$repo' muss absolut sein oder mit ./|../ beginnen" msgid "'$sm_path' already exists in the index" msgstr "'$sm_path' existiert bereits in der Bereitstellung" +#: git-submodule.sh:270 +#, sh-format +msgid "" +"The following path is ignored by one of your .gitignore files:\n" +"$sm_path\n" +"Use -f if you really want to add it." +msgstr "" +"Der folgende Pfad wird durch eine deiner \".gitignore\" Dateien " +"ignoriert:\n" +"$sm_path\n" +"Benutze -f wenn du diesen wirklich hinzufügen möchtest." + +#: git-submodule.sh:281 +#, sh-format +msgid "Adding existing repo at '$sm_path' to the index" +msgstr "Füge existierendes Projektarchiv in '$sm_path' der Bereitstellung " +"hinzu." + #: git-submodule.sh:283 #, sh-format msgid "'$sm_path' already exists and is not a valid git repo" @@ -5385,8 +5572,14 @@ msgid "Failed to recurse into submodule path '$sm_path'" msgstr "Fehler bei Rekursion in Unterprojekt-Pfad '$sm_path'" #: git-submodule.sh:713 -msgid "--" -msgstr "--" +msgid "--cached cannot be used with --files" +msgstr "--cached kann nicht mit --files benutzt werden" + +#. unexpected type +#: git-submodule.sh:753 +#, sh-format +msgid "unexpected mode $mod_dst" +msgstr "unerwarteter Modus $mod_dst" #: git-submodule.sh:771 #, sh-format @@ -5412,11 +5605,22 @@ msgstr "Blob" msgid "submodule" msgstr "Unterprojekt" +#: git-submodule.sh:840 +msgid "# Submodules changed but not updated:" +msgstr "# Unterprojekte geändert, aber nicht aktualisiert:" + +#: git-submodule.sh:842 +msgid "# Submodule changes to be committed:" +msgstr "# Änderungen in Unterprojekt zum Eintragen:" + #: git-submodule.sh:974 #, sh-format msgid "Synchronizing submodule url for '$name'" msgstr "Synchronisiere Unterprojekt-URL für '$name'" +#~ msgid "--" +#~ msgstr "--" + #~ msgid "Could not extract email from committer identity." #~ msgstr "Konnte E-Mail-Adresse des Einreichers nicht extrahieren." -- 2.11.4.GIT