From b610827e42ca9e6d767be6bab14bc3a784e6347e Mon Sep 17 00:00:00 2001
From: "Aaron W. LaFramboise" <aaronavay62@aaronwl.com>
Date: Tue, 26 Oct 2004 20:39:00 +0000
Subject: [PATCH] 	* configure.in (case ${target}): Do not build
 fixincludes 	on platforms where it is not used. 	* configure:
 Regenerated.
 ----------------------------------------------------------------------

---
 ChangeLog    |   6 +++
 configure    | 162 ++++++++++++++++++++++++++++++++++-------------------------
 configure.in |  42 +++++++++++++---
 3 files changed, 134 insertions(+), 76 deletions(-)

diff --git a/ChangeLog b/ChangeLog
index 1aa28e1fc..c32ca13a2 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,9 @@
+2004-10-26  Paolo Bonzini  <bonzini@gnu.org>
+
+	* configure.in (case ${target}): Do not build fixincludes
+	on platforms where it is not used.
+	* configure: Regenerated.
+
 2004-10-23  Daniel Jacobowitz  <dan@debian.org>
 
 	* configure.in: Use an absolute path to install-sh.
diff --git a/configure b/configure
index 2077c2d1c..7039a0278 100755
--- a/configure
+++ b/configure
@@ -1211,7 +1211,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
     ;;
   alpha*-*-*vms*)
-    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss build-fixincludes ${libgcj}"
     ;;
   alpha*-*-linux*)
     # newlib is not 64 bit ready
@@ -1245,6 +1245,9 @@ case "${target}" in
   arc-*-*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
+  arm-semi-aof )
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   arm-*-coff | strongarm-*-coff | xscale-*-coff)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -1308,6 +1311,9 @@ case "${target}" in
   h8500-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
+  hppa1.1-*-osf* | hppa1.1-*-bsd* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   hppa*64*-*-linux* | parisc*64*-*-linux*)
     # In this case, it's because the hppa64-linux target is for
     # the kernel only at this point and has no libc, and thus no
@@ -1338,6 +1344,9 @@ case "${target}" in
     # No gdb or ld support yet.
     noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
     ;;
+  i370-*-opened*)
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   i[3456789]86-*-coff | i[3456789]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -1362,7 +1371,7 @@ case "${target}" in
     ;;
   i[3456789]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
-    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj} build-fixincludes"
 
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
@@ -1373,7 +1382,7 @@ case "${target}" in
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss build-fixincludes ${libgcj}"
     # always build newlib if winsup directory is present.
     if test -d "$srcdir/winsup"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -1388,8 +1397,12 @@ case "${target}" in
          ;;
     esac
     ;;    
+  i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
+  i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   i[3456789]86-*-pe)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} build-fixincludes"
     ;;
   i[3456789]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
@@ -1452,7 +1465,10 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
   powerpc-*-eabi)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} build-fixincludes"
+    ;;
+  powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   rs6000-*-lynxos*)
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
@@ -1781,7 +1797,7 @@ else
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1785: checking for $ac_word" >&5
+echo "configure:1801: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1811,7 +1827,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1815: checking for $ac_word" >&5
+echo "configure:1831: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1862,7 +1878,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1866: checking for $ac_word" >&5
+echo "configure:1882: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1894,7 +1910,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1898: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1914: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1905,12 +1921,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1909 "configure"
+#line 1925 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1936,12 +1952,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1940: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1956: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1945: checking whether we are using GNU C" >&5
+echo "configure:1961: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1950,7 +1966,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1954: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1970: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1969,7 +1985,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1973: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1989: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2036,7 +2052,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2040: checking for $ac_word" >&5
+echo "configure:2056: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2068,7 +2084,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2072: checking for $ac_word" >&5
+echo "configure:2088: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2101,7 +2117,7 @@ fi
 fi
 
 echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2105: checking whether compiler driver understands Ada" >&5
+echo "configure:2121: checking whether compiler driver understands Ada" >&5
 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2134,7 +2150,7 @@ else
 fi
 
 echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2138: checking how to compare bootstrapped objects" >&5
+echo "configure:2154: checking how to compare bootstrapped objects" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2232,9 +2248,9 @@ saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS $gmpinc"
 # Check GMP actually works
 echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2236: checking for correct version of gmp.h" >&5
+echo "configure:2252: checking for correct version of gmp.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2238 "configure"
+#line 2254 "configure"
 #include "confdefs.h"
 #include "gmp.h"
 int main() {
@@ -2245,7 +2261,7 @@ choke me
 
 ; return 0; }
 EOF
-if { (eval echo configure:2249: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2265: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2258,12 +2274,12 @@ rm -f conftest*
 
 if test x"$have_gmp" = xyes; then
   echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2262: checking for MPFR" >&5
+echo "configure:2278: checking for MPFR" >&5
 
   saved_LIBS="$LIBS"
   LIBS="$LIBS $gmplibs"
   cat > conftest.$ac_ext <<EOF
-#line 2267 "configure"
+#line 2283 "configure"
 #include "confdefs.h"
 #include <gmp.h>
 #include <mpfr.h>
@@ -2271,7 +2287,7 @@ int main() {
 mpfr_t n; mpfr_init(n);
 ; return 0; }
 EOF
-if { (eval echo configure:2275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2439,13 +2455,13 @@ The available languages are: ${potential_languages}" 1>&2; exit 1; }
   ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
 fi
 
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
 # If we have the source for $noconfigdirs entries, add them to $notsupp.
 
 notsupp=""
 for dir in . $skipdirs $noconfigdirs ; do
-  dirname=`echo $dir | sed -e s/target-//g`
+  dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
   if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
     if test -r $srcdir/$dirname/configure ; then
@@ -2456,6 +2472,16 @@ for dir in . $skipdirs $noconfigdirs ; do
       fi
     fi
   fi
+  if test $dir != .  && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+    build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+    if test -r $srcdir/$dirname/configure ; then
+      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	true
+      else
+	notsupp="$notsupp $dir"
+      fi
+    fi
+  fi
   if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
     if test -r $srcdir/$dirname/configure ; then
@@ -2748,7 +2774,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2752: checking for $ac_word" >&5
+echo "configure:2778: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2783,7 +2809,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2787: checking for $ac_word" >&5
+echo "configure:2813: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2818,7 +2844,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2822: checking for $ac_word" >&5
+echo "configure:2848: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2853,7 +2879,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2857: checking for $ac_word" >&5
+echo "configure:2883: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2888,7 +2914,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2892: checking for $ac_word" >&5
+echo "configure:2918: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2923,7 +2949,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2927: checking for $ac_word" >&5
+echo "configure:2953: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3557,7 +3583,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3561: checking for $ac_word" >&5
+echo "configure:3587: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3590,7 +3616,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3594: checking for $ac_word" >&5
+echo "configure:3620: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3629,7 +3655,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3633: checking for $ac_word" >&5
+echo "configure:3659: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3662,7 +3688,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3666: checking for $ac_word" >&5
+echo "configure:3692: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3701,7 +3727,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3705: checking for $ac_word" >&5
+echo "configure:3731: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3734,7 +3760,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3738: checking for $ac_word" >&5
+echo "configure:3764: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3773,7 +3799,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3777: checking for $ac_word" >&5
+echo "configure:3803: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3806,7 +3832,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3810: checking for $ac_word" >&5
+echo "configure:3836: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3845,7 +3871,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3849: checking for $ac_word" >&5
+echo "configure:3875: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3878,7 +3904,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3882: checking for $ac_word" >&5
+echo "configure:3908: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3917,7 +3943,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3921: checking for $ac_word" >&5
+echo "configure:3947: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3950,7 +3976,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3954: checking for $ac_word" >&5
+echo "configure:3980: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3989,7 +4015,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3993: checking for $ac_word" >&5
+echo "configure:4019: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4022,7 +4048,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4026: checking for $ac_word" >&5
+echo "configure:4052: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4061,7 +4087,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4065: checking for $ac_word" >&5
+echo "configure:4091: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4094,7 +4120,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4098: checking for $ac_word" >&5
+echo "configure:4124: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4133,7 +4159,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4137: checking for $ac_word" >&5
+echo "configure:4163: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4166,7 +4192,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4170: checking for $ac_word" >&5
+echo "configure:4196: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4212,7 +4238,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4216: checking for $ac_word" >&5
+echo "configure:4242: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4245,7 +4271,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4249: checking for $ac_word" >&5
+echo "configure:4275: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4284,7 +4310,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4288: checking for $ac_word" >&5
+echo "configure:4314: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4317,7 +4343,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4321: checking for $ac_word" >&5
+echo "configure:4347: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4356,7 +4382,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4360: checking for $ac_word" >&5
+echo "configure:4386: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4389,7 +4415,7 @@ if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4393: checking for $ac_word" >&5
+echo "configure:4419: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4428,7 +4454,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4432: checking for $ac_word" >&5
+echo "configure:4458: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4461,7 +4487,7 @@ if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4465: checking for $ac_word" >&5
+echo "configure:4491: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4500,7 +4526,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4504: checking for $ac_word" >&5
+echo "configure:4530: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4533,7 +4559,7 @@ if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4537: checking for $ac_word" >&5
+echo "configure:4563: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4572,7 +4598,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4576: checking for $ac_word" >&5
+echo "configure:4602: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4605,7 +4631,7 @@ if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4609: checking for $ac_word" >&5
+echo "configure:4635: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4644,7 +4670,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4648: checking for $ac_word" >&5
+echo "configure:4674: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4677,7 +4703,7 @@ if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4681: checking for $ac_word" >&5
+echo "configure:4707: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4762,7 +4788,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4766: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4792: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4809,7 +4835,7 @@ esac
 # gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
 # possible, however, we can resort to mv.
 echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4813: checking if symbolic links between directories work" >&5
+echo "configure:4839: checking if symbolic links between directories work" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
diff --git a/configure.in b/configure.in
index 5670f9f1e..4a646915d 100644
--- a/configure.in
+++ b/configure.in
@@ -433,7 +433,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
     ;;
   alpha*-*-*vms*)
-    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss build-fixincludes ${libgcj}"
     ;;
   alpha*-*-linux*)
     # newlib is not 64 bit ready
@@ -467,6 +467,9 @@ case "${target}" in
   arc-*-*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
+  arm-semi-aof )
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   arm-*-coff | strongarm-*-coff | xscale-*-coff)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -530,6 +533,9 @@ case "${target}" in
   h8500-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
+  hppa1.1-*-osf* | hppa1.1-*-bsd* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   hppa*64*-*-linux* | parisc*64*-*-linux*)
     # In this case, it's because the hppa64-linux target is for
     # the kernel only at this point and has no libc, and thus no
@@ -560,6 +566,9 @@ case "${target}" in
     # No gdb or ld support yet.
     noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
     ;;
+  i370-*-opened*)
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -584,7 +593,7 @@ case "${target}" in
     ;;
   i[[3456789]]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
-    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj} build-fixincludes"
 
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
@@ -595,7 +604,7 @@ case "${target}" in
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss build-fixincludes ${libgcj}"
     # always build newlib if winsup directory is present.
     if test -d "$srcdir/winsup"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -610,8 +619,12 @@ case "${target}" in
          ;;
     esac
     ;;    
+  i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
+  i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   i[[3456789]]86-*-pe)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} build-fixincludes"
     ;;
   i[[3456789]]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
@@ -674,7 +687,10 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
   powerpc-*-eabi)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} build-fixincludes"
+    ;;
+  powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   rs6000-*-lynxos*)
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
@@ -1250,13 +1266,13 @@ The available languages are: ${potential_languages}])
   ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
 fi
 
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
 # If we have the source for $noconfigdirs entries, add them to $notsupp.
 
 notsupp=""
 for dir in . $skipdirs $noconfigdirs ; do
-  dirname=`echo $dir | sed -e s/target-//g`
+  dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
   if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
     if test -r $srcdir/$dirname/configure ; then
@@ -1267,6 +1283,16 @@ for dir in . $skipdirs $noconfigdirs ; do
       fi
     fi
   fi
+  if test $dir != .  && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+    build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+    if test -r $srcdir/$dirname/configure ; then
+      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	true
+      else
+	notsupp="$notsupp $dir"
+      fi
+    fi
+  fi
   if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
     if test -r $srcdir/$dirname/configure ; then
-- 
2.11.4.GIT